Non Keyed 170W AC Adapter
Can you use a Non Keyed 170W AC Adapter for a W520 on a Keyed W530?
Solved!
Go to Solution.
I received a new one on Saturday and it was non-keyed, but I tried it this morming and it workded with the W530. I actually triied it a few times just to make sure that it worked. It is larger than the PSU that came with my W530's which were the new slim versions. However, since I got it so I could leave in one place and not carry the PSU around, its a keeper.
Thanks
Similar Messages
-
Key fields and non-key field of condition table
Hello Gurus,
what is key fields and non-key field of condition table?
thanks very much!Key field
Each condition table contains keys that can be used for creating dependent condition records.
for example let take condition type PR00.
PR00 uses access sequence PR02 .
Access sequence PR02 has following tables associated with it namely 304, 305 & 306
When you create a conditon record for PR00 with transaction VK11 or VK31, you have a button 'key combination' which is nothing but fields associated with tables 304, 305 & 306.
In brief, Condition records are always created using specific keys. Condition tables are used to define the structure of the keys of a condition record.
Non key field
For example take condition table 144 - sales deal basic data.
Table 144 is associated with access sequence PBUD.
If you check the fields associated with this table (click technical view button), there are three fields at bottom which do not have 'key' check mark -KDATU, PLTYP, KSTAF
So, when you create a condition record for PBUD, system does not propose these 3 fields in 'key combination' and hence are non key fields.
Please reward points for good answers as this would help increase the total donation that SAP will make to the United Nations World Food Programme. -
How can we protect the ztable non key fields data in sm30 display.
Hi experts,
I have created tablemaintenence generator for one z table, in sm30 user has access to enter the data.
in that maintenence i have to protect the non key field values data like once the user saves his data.than in the edit mode it has to show the nonkey fields data but dont access to edit some nonkey fields... please helpHi
U need to change the screen flow generated by maintenance view generator: here go to Enviroments->Modifications->Screen; doubleclick on your screen and the system take you to screen painter.
Here go to screen flow and in PBO add new module in order to protect the field for the old records: u can use the statament LOOP AT SCREEN./ENDLOOP to do it.
LOOP AT SCREEN.
IF .....
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Max -
Maintenance view subset P = S in combination with a non-key.
We are trying to create a maintenance view with subset selection based
on a non-key field. However no dialog screen will be created in order to
select the right data (subset) for list display. We found a referenced
note of this problem: sap note nr 624459 "subset field is not
transferred" which is already available in the L7D system.
-> Does the subset P = S only work in combination with a key field?Hi,
I presume the P = S works for only Primary Key combinations. For eg: If you create maintenance view on MARD table and give values P= S to say only MATNR and WERKS fields. You generate the Table Maintenance. You get the filter for Material and Plant but there is a button F7 new selection .. if you press that you can select the third key field Storage Location as well. Presumably it works for the key fields alone.
Cordially,
Shankar Narayanan. -
Changing Non key field to Key field in a custom table
Hello Abap gurus:
I have a requirement in which i need to change a non key field in my custom table(Z TABLE) to key field.
For example; i have field sequence as
field 1 key field
field 2 key field
field 3 key field
field 4 non-key field
field 5 non-key field
field 6 non-key field
field 7 non-key field.
i want to change field 7 as key field.
Can i do perform operation??
when i am tryingto perform bove operation it is taking long time to get the table activated.
Could any one please help me in getting this resolved.
regards,
Sravanthi.Use DB Utility (se14) to perform alter table or conversion. The latter is used when atemps to perform first operation fails. Which one is used, really depends on system and current DB table state (i.e. if has any content and what is being adjusted).
The way Max suggested is similar to [conversion process|http://help.sap.com/saphelp_nw04/helpdata/EN/cf/21f1b8446011d189700000e8322d00/content.htm] which system takes care of itself.
Refer [Adjusting Database Structures|http://help.sap.com/saphelp_nw04/helpdata/EN/cf/21f1ab446011d189700000e8322d00/content.htm] and already given link to conversion.
Please also consider potential errors while doing conversion . This can lead to data loss, so you should think of some backup to prevent that.
Regards
Marcin -
How to fetch old and new value from of a field(non-key) from LOGDATA
Hello SDNers,
i m fecthing LOgdata from dbtlog table[in our case the log is not getting Updated in CDHDR and CDPOS table]
i m using the same logic as it is used in RSVTPROT
but the problem is
" IT is fetching OLD and NEW VALUE after Update from same field LOGDATA of dbtlog table BUT when i used same logic it is FEtching only OLD VALUEs,
CAN U GUYS PLS TELL ME HOW TO FECTH OLD VALUE and NEW VALUE of a PArticular field(non-key field, fecthing key field is not an issue) From LOGDATA field of DBTLOG.
thx a lot in advance
Regards
KuldeepHi,
May be this link is useful to you.
a® -
How can we hide the non key field values in the sm30 display
hello experts,
I have to protect the non key field values in the sm30 display , can u help me out wat changes i have to do in the layout.Hello Gopal,
What do you mean by 'protecting' your non-key field value?
1) You want to display it, but make it non-changeable
A - Make the field as output-only in screen, as already answered by a preivous collegue
2) You do not want to display this field at all
A - Goto the DDIC definition of the view (not possible for a table directly), and maintain the required field as a Hidden. After activating, remember to re-generate the maintenance dialogue. Also, please maintain Event 21, in case you want to access/change the value of this field in background.
3) You want to maintain special validations/checks for the field
This can be easily done by introducing your modules within the CHAIN-FIELD commands in the PAI of the generated screens.
Best Regards,
Rekha -
Error in collect statement(non-key fields must be numeric)...
Error in collect statement(non-key fields must be numeric)...
Hello Experts,
I created an internal table based from a ztable. The structure of the ztable is
as follows:
1. MANDT -> PRIMARY KEY
2. BUKRS -> PRIMARY KEY
3. TXK50 -> PRIMARY KEY
4. ANLKL -> PRIMARY KEY
5. KTANSW -> PRIMARY KEY
6. KOSTL -> PRIMARY KEY
Then the remainder of the fields(around 8 fields) are currency data types(ANBTR).
An error is showing saying 'You can only use the collect command in a table if all of its non-key
fields are numeric(type I,P or F).
I searched the forum and it said that non-keys must be numeric in order for the
collect command to work. But all of my primary keys are non-numeric.
Below is my declaration:
CLASS-DATA: gt_output_acq TYPE hashed TABLE OF zsd_output_acq
WITH UNIQUE KEY bukrs txk50 anlkl
ktansw kostl,
gt_output_ret LIKE gt_output_acq,
wa_output_gen LIKE LINE OF gt_output_acq,
gt_output_net TYPE HASHED TABLE OF zsd_output_net
WITH UNIQUE KEY bukrs txk50 anlkl
ktansw kostl,
wa_output_net LIKE LINE OF gt_output_net,
gt_sort_crit TYPE SORTED TABLE OF t_sort_crit
WITH NON-UNIQUE KEY bukrs kostl,
wa_sort_crit LIKE LINE OF gt_sort_crit.
FIELD-SYMBOLS: <fs_output_acq> LIKE LINE OF gt_output_acq,
<fs_output_ret> LIKE LINE OF gt_output_ret,
<fs_output_net> LIKE LINE OF gt_output_net.
COLLECT <fs_output_acq> INTO gt_output_acq. "Here is the errorHi Vijay,
Here it is:
CLASS-DATA: gt_output_acq TYPE hashed TABLE OF zsd_output_acq
WITH unique KEY bukrs txk50 anlkl
ktansw kostl,
gt_output_ret LIKE gt_output_acq,
wa_output_gen LIKE LINE OF gt_output_acq,
gt_output_net TYPE hashed TABLE OF zsd_output_net
WITH unique KEY bukrs txk50 anlkl
ktansw kostl,
wa_output_net LIKE LINE OF gt_output_net,
gt_sort_crit TYPE SORTED TABLE OF t_sort_crit
WITH NON-UNIQUE KEY bukrs kostl,
wa_sort_crit LIKE LINE OF gt_sort_crit. -
Registry-based discovery does not show non key property value
Hi,
Discovered Inventory shows instances of my new class correctly, but the non key property ServerType appears but has no value. I have confirmed each instance does have the registry value populated. What can I do?
I see the following Event 31876 on one of the clients:
Data item returned no information for parameter '$Data/Values/ServerType$'
This usually indicates that the query is incorrect.
Detailed Background:
My custom application is made of 8 different computer roles.
HKLM\SOFTWARE\Vendor\Appname exists = true indicates an instance of my app.
HKLM\SOFTWARE\Vendor\Appname\ServerType indicates the actual server role.
I want an initial hosted class (VendorServer) based on Microsoft.Windows.Computer base class to contain all server roles.
Then I will create 8 hosted classes (VendorServerRoleA, VendorServerRoleB, etc) for each server role based on the initial hosted class (VendorServer).
My discovery for VendorServer class created instances, and I see ServerType as a property in Discovered Inventory, but it is blank for all instances. Should I expect to see ServerType populated where I mapped it as follows:
Name =
$MPElement[Name="MPName.VendorServer"]/ServerType$
Value =
$Data/Values/ServerType$
Does $MPElement need to reference the discovery object instead of the class object (which it currently does)?
I started with a blank MP and then create the new VendorServer class based on Microsoft.Windows.ComputerRole and added the new Property, ServerType as a non key property.
The discovery targets Microsoft.Windows.Computers. Is it ok to have the discover target one class and the VendorServer class have a different base class?
My build event was simply if HKLM\SOFTWARE\Vendor\Appname exists
I am hesitant to proceed to create my VendorServerRoleA class based on HKLM\SOFTWARE\Vendor\Appname\ServerType=AAA until what I have built so far works completely, unless it is not expected to do so.
A related question. Once I have classes for each server role, can I target monitorA at multiple classes, or do I need to create a new monitor for each class?
This authoring learning curve is so steep as I am sure many of you already know. MUCH thanks for help...<ManagementPack ContentReadable="true" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Manifest>
<Identity>
<ID>Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack</ID>
<Version>1.1.1.1</Version>
</Identity>
<Name>Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack</Name>
<References>
<Reference Alias="SC">
<ID>Microsoft.SystemCenter.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Windows">
<ID>Microsoft.Windows.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Health">
<ID>System.Health.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="System">
<ID>System.Library</ID>
<Version>6.0.6278.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
</References>
</Manifest>
<TypeDefinitions>
<EntityTypes>
<ClassTypes>
<ClassType ID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServer" Accessibility="Internal" Abstract="false" Base="Windows!Microsoft.Windows.ComputerRole" Hosted="true" Singleton="false">
<Property ID="ServerType" Type="string" Key="false" CaseSensitive="false" Length="256" MinLength="0" />
</ClassType>
<ClassType ID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServerCDC" Accessibility="Internal" Abstract="false" Base="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServer" Hosted="true"
Singleton="false" />
</ClassTypes>
</EntityTypes>
</TypeDefinitions>
<Monitoring>
<Discoveries>
<Discovery ID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.DiscoverIFSSubsystemServer" Enabled="true" Target="Windows!Microsoft.Windows.Computer" ConfirmDelivery="false" Remotable="true" Priority="Normal">
<Category>Discovery</Category>
<DiscoveryTypes>
<DiscoveryClass TypeID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServer" />
</DiscoveryTypes>
<DataSource ID="DS" TypeID="Windows!Microsoft.Windows.FilteredRegistryDiscoveryProvider">
<ComputerName>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>
<RegistryAttributeDefinitions>
<RegistryAttributeDefinition>
<AttributeName>KeyExists</AttributeName>
<Path>SOFTWARE\Thales\IFSBOSystem</Path>
<PathType>0</PathType>
<AttributeType>0</AttributeType>
</RegistryAttributeDefinition>
</RegistryAttributeDefinitions>
<Frequency>300</Frequency>
<ClassId>$MPElement[Name="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServer"]$</ClassId>
<InstanceSettings>
<Settings>
<Setting>
<Name>$MPElement[Name="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Name>
<Value>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServer"]/ServerType$</Name>
<Value>$Data/Values/ServerType$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="System!System.Entity"]/DisplayName$</Name>
<Value>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Value>
</Setting>
</Settings>
</InstanceSettings>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Values/KeyExists</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">true</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</DataSource>
</Discovery>
<Discovery ID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.DiscoverIFSSubsystemServerCDC" Enabled="true" Target="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServer" ConfirmDelivery="false" Remotable="true"
Priority="Normal">
<Category>Discovery</Category>
<DiscoveryTypes>
<DiscoveryClass TypeID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServerCDC" />
</DiscoveryTypes>
<DataSource ID="DS" TypeID="Windows!Microsoft.Windows.FilteredRegistryDiscoveryProvider">
<ComputerName>$Target/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>
<RegistryAttributeDefinitions>
<RegistryAttributeDefinition>
<AttributeName>ServerTypeCDCTrue</AttributeName>
<Path>SOFTWARE\Thales\IFSBOSystem\ServerType</Path>
<PathType>1</PathType>
<AttributeType>1</AttributeType>
</RegistryAttributeDefinition>
</RegistryAttributeDefinitions>
<Frequency>300</Frequency>
<ClassId>$MPElement[Name="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServerCDC"]$</ClassId>
<InstanceSettings>
<Settings>
<Setting>
<Name>$MPElement[Name="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Name>
<Value>$Target/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServer"]/ServerType$</Name>
<Value>$Data/Values/ServerType$</Value>
</Setting>
<Setting>
<Name>$MPElement[Name="System!System.Entity"]/DisplayName$</Name>
<Value>$Target/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Value>
</Setting>
</Settings>
</InstanceSettings>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Values/ServerTypeCDCTrue</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">CDC</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</DataSource>
</Discovery>
</Discoveries>
</Monitoring>
<LanguagePacks>
<LanguagePack ID="ENU" IsDefault="true">
<DisplayStrings>
<DisplayString ElementID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack">
<Name>Thales IFS Subsystem Discovery Monitoring Management Pack</Name>
<Description>The purpose of this management pack is to monitor the health of various components of the Thales IFS subsystem servers including server types CDC CRD DC MWS PMS and SUP.</Description>
</DisplayString>
<DisplayString ElementID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.DiscoverIFSSubsystemServer">
<Name>Discover IFS Subsystem Server</Name>
</DisplayString>
<DisplayString ElementID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.DiscoverIFSSubsystemServerCDC">
<Name>IFS Subsystem CDC Server</Name>
</DisplayString>
<DisplayString ElementID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServer">
<Name>IFS Subsystem Server</Name>
<Description>CDC CRD DC MWS PMS SUP</Description>
</DisplayString>
<DisplayString ElementID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServer" SubElementID="ServerType">
<Name>ServerType</Name>
<Description>CDC CRD DC MWS PMS or SUP</Description>
</DisplayString>
<DisplayString ElementID="Thales.IFS.Subsystem.Discovery.Monitoring.ManagementPack.IFSSubsystemServerCDC">
<Name>IFS Subsystem CDC Server</Name>
</DisplayString>
</DisplayStrings>
</LanguagePack>
</LanguagePacks>
</ManagementPack> -
Hi,
After using sql loader to import informations in the table fa_mass_additions and after the functionnal uses a treatment to imputate this assets, it asks me to do an update on the table fa_additions to change the value of attribute1 but i get an error
Error report:
ORA-01779: cannot modify a column which maps to a non key-preserved table
ORA-06512: at line 11
01779. 00000 - "cannot modify a column which maps to a non key-preserved table"
*Cause: An attempt was made to insert or update columns of a join view which
map to a non-key-preserved table.
*Action: Modify the underlying base tables directly.
please how can i do this update?Hi,
The "fa_additions" is a view, not a table.
You should update the base table "fa_additions_b".
Regards,
Bashar -
Old key field FROMNUMBER is now non-key field
Hi All,
I am getting one issue with NRIV table.When I tried to activate this table from se11 it is giving error as
Program start============================================================
Mass activation
=========================================================================
Process..................: presap_4
User.....................: ABAP1
Date, time...............: 19.02.2007, 12:50:33
Platform.................: CUSTOMER-PRE(620)/ORACLE/WindowsNT/presap
Tool.....................: SE11_OLD/RADMASG0
Log......................: T, ABAP120070219125033
Program parameters:
Input medium..............: Direct object entry
Activation method.........: Activ
Chk. mode.................: O
Version to be activated...: M
Versions to Be Deleted....: Delete only active versions
Lock against paral. exec..: Shared
Parallel mode.............: Switched off
=========================================================================
Start phase 001 **********************************************************
Activation of objects
Activate objects at level 1
Old key field FROMNUMBER is now non-key field
Structure change at field level (convert table NRIV)
Activation of objects
End phase 001 ***********************************************************
Activation of objects
Activate objects at level 1
Old key field FROMNUMBER is now non-key field
Structure change at field level (convert table NRIV)
Activation of objects
End phase 001 ***********************************************************
Start phase 002 **********************************************************
Final log
Following objects not activated/deleted or activated/deleted w. warning:
Table NRIV could not be activated
(E- Structure change at field level (convert table NRIV) )
Final log
End phase 002 ***********************************************************
Start phase 003 **********************************************************
Statistics on activated and deleted objects
Number of objects to be activated............: 1
Objects not activated........................: 1
Activated objects with errors in dependencies: 0
Objects activated with warning...............: 0
Successfully activated objects...............: 0"
Can any one help in this.It is bit urgent.
Thanks,
KrishnaHi Brend,
Thanks for the reply.
But could you tell me how to convert this table and what to convert.
Posibble could you give this with step by step, we are struck with number range issues with this problem and needed with critical.
Thanks for the help in advance.
Krishna -
Non key field in Maintainance View
Hi,
I have generated a maintainance view for a Z table. I want to sort data from SM30 by means of a selection screen, for that, in the 'View Flds' tab in the maintainance view, i have entered a 'S' for which ever fields i want to filter the data on.
When i execute the table maintainance, i am able to see only the key fields and not the non-key ones in the selection popup, though i have put a 'S' for both, the key and non-key fields.
Can anyone please let me know how to get the non-key fields on the selection popup when i execute the maintainance view?
Cheers,
Raghav.Not possible via this functionality. A workaround was suggested by Raymond in this thread:
Transaction code for Table Maitainence for table
Thomas -
To pass non key field data to workflow
Hello,
I want to pass data from webdynpro application to workflow. For this i used FM 'SWE_CREATE_EVENT' to trigger the workflow.
I filled the container table with following values
wa_cont-element = 'NAME2'
wa_cont-value = 'James Anderson'.
APPEND wa_cont to it_cont.
wa_cont-element = 'STRAS'
wa_cont-value = 'Hampshire'.
APPEND wa_cont to it_cont.
wa_cont-element = 'PSTLZ'
wa_cont-value = '104010'.
APPEND wa_cont to it_cont.
wa_cont-element = 'ORT01'
wa_cont-value = 'London'.
APPEND wa_cont to it_cont.
wa_cont-element = 'LAND1'
wa_cont-value = 'United Kingdom'.
APPEND wa_cont to it_cont.
Also i created a custom business object 'ZHRADCHO'. In which i decleared
KEY FIELDS as ->
PERNR
SUBTY
ENDDA
BEGDA
METHODS ->
send_data_to_wf
I created Import/Export parameters for this method ->
NAME2 (Import and Export parameter)
STRAS (Import and Export parameter)
PSTLZ (Import and Export parameter)
ORT01 (Import and Export parameter)
LAND1 (Import and Export parameter)
EVENTS ->
CHANGE
In SWDD transaction -> basic data -> binding
I did the following binding
&_EVT_CREATOR& => &_WF_INITIATOR&
&_EVT_OBJECT.PERSONNELNUMBER& => &WA_ZHRAD.PERNR&
&_EVT_OBJECT.SUBTYPE& => &WA_ZHRAD.SUBTY&
&_EVT_OBJECT.ENDDATE& => &WA_ZHRAD.ENDDA&
&_EVT_OBJECT.STARTDATE& => &WA_ZHRAD.BEGDA&
WA_ZHRAD is structure type of custom table ZHRAD in which i want the data. So in the workflow container i created the element of type ZHRAD. How do i get the rest of the fields which i declared in the method. I am able to get the data in the key fields which are binded as above. But if i bind the rest of the fields i get an error. How do i get the data in non-key field elements?
Regards,
Yayati EkboteHello Rick,
I am passing the other values through container only. But my question is, in workflow side, in which parameters will i recieve the values?
In the method of the BO i wrote in the automatically generated program.
swc_get_element container 'C/o ' CO.
swc_set_element container 'C/o ' CO.
swc_get_element container 'StreetHouseNo ' STREETHOUSENO.
swc_set_element container 'StreetHouseNo ' STREETHOUSENO.
Like wise for all non-key parameters.
So in SWDD transaction, which parameters should i bind to get the values in the fields of workflow container?
Regards,
Yayati Ekbote -
How to Set Position Cursor Option to Non key fields in Table Maintenance .
Hi,
I have created a Ztable and i am using table maintenance for that table. In TMG ,by default we have position cursor option to key fields only . User wants that position cursor option for non key fields also. Please help me out of this issue .
How to provide Position Cursor option to Non key fields.
Thanks & Regards,
Prasad.Hi Nabheet,
I tried using TYPE S DISPLAY LIKE E and am setting vim_abort_saving as X and sy-subrc as 4. However, this is also not enabling the fields. In this case, the first 2 fields - key fields are getting enabled but not the required ones. The above snapshot is for the same.
lv_date1 = table1-date1.
lv_date2 = table1-date2.
lv_diff = lv_date2 - lv_date1.
IF lv_diff LT 0.
CLEAR: lv_err_msg.
lv_err_msg = text-005.
MESSAGE lv_err_msg TYPE 'S' DISPLAY LIKE lc_e.
vim_abort_saving = lc_x.
sy-subrc = 4. -
Searching non-key fields in table maintainance
Hi..
How to find non-key fields or how can we enble the FIND button in maintaince table ?
Please reply....
Thanks ...Hi,
When you are on the table maintenance screen, you can :
1. Goto menu options. Selection-->By Content
2. Choose the fields you want to search data on and Press enter
3. Enter the operator and the value (you can append or insert a new field here as well )
4. Click on the choose button.
regards,
Advait
Maybe you are looking for
-
Hi, I have an iPhone 5S and have recently upgraded to the latest version. Whilst searching the Internet this morning I followed a link on Google search which came up wits a small white box in the centre of the screen saying http://android-updates.com
-
New 30g iPod Not Recognized By iTunes/Mac Using USB 2.0
Hey there folks . . . I just came home today with a shiny new 30GB iPod, but am having a little trouble in getting it to behave properly. The iPod doesn't show up in iTunes 7 or the Finder when I connect it to a USB 2.0 port. It recognizes the thing
-
I wanted some advice on slide show/ paging. I created a html table with list of student in a particular class for example, each student id has hyperlink which goes to another jsp with a table which shows a student profile, there I have method that ta
-
How to get content sensitive roll over text?
I've just been looking for at some tutorials, (can't find many) but can't seem to get it to work. i just want to be able to roll over movieclips and have messages displayed in a textbox. i have the font embeded. i know it's got to be something simple
-
If iPad already has a 3G Verizion or ATandT service installed can it be used in other countries with their SIM card to hookup to 3G network there?