Non mi si aprono delle applicazioni incluse su mac pro

non si aprono le Applicazioni incluse su mac pro retina acquistato da una settimana. Seleziono l'app, non si apre ed inizia a saltellare.
Grazie

Dal momento che solo purchsaed vostro Mac, avete 90 giorni di consulenza telefonica gratuita con Apple. Vedere il pulsante Contatti nell'angolo in basso a destra di questa paage.

Similar Messages

Ho appena comprato un macbook pro e in fatto di video mi trovo nel merdone ... perche non riesco a spostare un vedeo mp4 da mac pro a memoria esterna???

ho appena comprato un macbook pro e in fatto di video mi trovo nel merdone ...
perche non riesco a spostare un video mp4 da mac pro a memoria esterna???

ho appena comprato un macbook pro e in fatto di video mi trovo nel merdone ...
perche non riesco a spostare un video mp4 da mac pro a memoria esterna???

HT202856 Dell P2715Q for 2013 Mac Pro.

The new Dell P2715Q 4K monitor looks to be a technically compatible monitor for the new Mac Pro. I see it supports DP 1.2 and MST.
Anyone using this monitor and and vouch for its use.
Thanks.

Hi,
I just setup a pair of these P2715Q monitors with my 2013 MacPro using the supplied MiniDisplayPort to Displayport cables. The screens look fantastic. The main issue I'm having is after restarting or cold starting the computer. Both monitors appear and only show a blank desktop. No menu bar, no Finder icons, etc.
The only fix so far is to power off one of the monitors - then back on. Then all is fine. I've unchecked the Mission Control thing to allow displays to have separate spaces. On a normal startup - the second monitor is usually just a blank desktop. It's like they are both showing that blank desktop.
You mentioned you were having similar issues. Any other resolution to this?
I ordered a pair of minidisplayport to minidisplayport adaptors to try - incase the rub is with the included cable configuration. I've tried resetting PRAM, NVRAM, etc. - Tried different thunderbolt ports.
Actually - when trying different thunderbolt ports - things got wonky in that the second monitor stopped being acknowledged by the computer. I kept moving the thunderbolt cable around - then it finally came back on. Not fun.
Another strange issue yesterday was when I sat down to work - both monitors were in sleep mode (computer still running though) - the primary monitor wouldn't activate. Even after a restart. I couldn't even power cycle the monitor with the power button. I ultimately had to pull the power cord on the monitor to get it back. Again... not fun.
One thing to note as well - My primary monitor is Rev 01... the secondary was built 2 months earlier and shows Rev. 00. I'm waiting for them to replace the second monitor. These guys update the firmware and other items and never tell anyone what's changed. But I sure want the most current build.
Any thoughts? - I'm running 10.10.2.
Thanks,
Sam

Dell U2711 in a Mac Pro - Best Callibration settings?

Hi guys. This is my first Post. This message is to ask if anyone has a really good calibration setting for this monitor DELL U2711. I purchased this monitor 1 month ago and want the best settings to use it in a Macpro 3.1. Im a graphic designer and also use after effects and final cut for motion graphics.
If anyone has good settings to recommend it would be great.
Thanks a lot!!

If you think calibrators are too expensive and if your not using it professionally for mission critical work,
then check out the Huey Pro. Because even a cheap calibrator is better than no calibrator.
http://www.buy.com/prod/pantone-huey-pro/q/loc/105/204305370.html
Edit. Just realized you'd be using it for Professional use so you'd probably want a higher grade one.
Though I would still recommend it over using ready-made profiles.
Message was edited by: Paul Veronin

Strange dual monitor behavior: mac pro + leopard + x1900xt + 2 dell 2001FPs

I recently purchased a mac pro dual quad core with radeon x1900xt graphics card. Updated to 10.5.1. I have a dual monitor setup: 2 Dell 2001FPs connected to the x1900xt with dual-link DVI cables.
Here's the problem:
I want to use both monitors at their optimal resolution (1600x1200). I can get one monitor to run at 1600x1200 by changing the display preferences, but when I change the secondary monitor to something above 1280x1024, it goes dark, then doesn't come back on (the green light remains on, however). Occasionally while this is happening I will get a message on the black monitor telling me the computer is asleep. It obviously is not since I can see it is awake on the operating screen.
Here's where it gets weird:
I just found out that if I drag the mouse over into the darkened screen and then click a couple times, the monitor comes alive at the desired 1600x1200 resolution! If I restart from there, I get the primary monitor to come up upon startup, but I have to change the secondary monitor back down to 1280x1024, then back up to 1600x1200, then do the mystery clicking with the mouse!
The problem occurs no matter which monitor is primary and no matter which slot is being used on the graphics card.
To me this sounds like a driver problem, but I'm posting in the Mac Pro forum to see if any others have purchased the same configuration and have similar issues.
Message was edited by: istra

It appears I have solved my problem...for the time being.
1. rechecked all connections, replaced cable on secondary monitor with new (no change in behavior)
2. reviewed system log and saw this junk:
{quote:title=system log}
Dec 19 11:57:37 dhcp-xxx-xx-xxx-xxx [0x0-0x2f02f].com.apple.systempreferences[690]: objc[690]: Class O3Panel is implemented in both /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Con trast.monitorPanel/Contents/MacOS/Contrast and /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Geo metry.monitorPanel/Contents/MacOS/Geometry. Using implementation from /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Geo metry.monitorPanel/Contents/MacOS/Geometry.
Dec 19 11:57:37 dhcp-xxx-xx-xxx-xxx [0x0-0x2f02f].com.apple.systempreferences[690]: objc[690]: Class O3Panel is implemented in both /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Geo metry.monitorPanel/Contents/MacOS/Geometry and /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/VPT .monitorPanel/Contents/MacOS/VPT. Using implementation from /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/VPT .monitorPanel/Contents/MacOS/VPT.
Dec 19 11:57:37 dhcp-xxx-xx-xxx-xxx [0x0-0x2f02f].com.apple.systempreferences[690]: objc[690]: Class O3Panel is implemented in both /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/VPT .monitorPanel/Contents/MacOS/VPT and /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Bez el.monitorPanel/Contents/MacOS/Bezel. Using implementation from /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Bez el.monitorPanel/Contents/MacOS/Bezel.
Dec 19 11:57:37 dhcp-xxx-xx-xxx-xxx [0x0-0x2f02f].com.apple.systempreferences[690]: objc[690]: Class O3Panel is implemented in both /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Bez el.monitorPanel/Contents/MacOS/Bezel and /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Ext endedTouchSwitch.monitorPanel/Contents/MacOS/ExtendedTouchSwitch. Using implementation from /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Ext endedTouchSwitch.monitorPanel/Contents/MacOS/ExtendedTouchSwitch.
Dec 19 11:57:37 dhcp-xxx-xx-xxx-xxx [0x0-0x2f02f].com.apple.systempreferences[690]: objc[690]: Class O3Panel is implemented in both /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Ext endedTouchSwitch.monitorPanel/Contents/MacOS/ExtendedTouchSwitch and /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Pow erMode.monitorPanel/Contents/MacOS/PowerMode. Using implementation from /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Pow erMode.monitorPanel/Contents/MacOS/PowerMode.
Dec 19 11:57:37 dhcp-xxx-xx-xxx-xxx [0x0-0x2f02f].com.apple.systempreferences[690]: objc[690]: Class O3Panel is implemented in both /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Pow erMode.monitorPanel/Contents/MacOS/PowerMode and /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Aut horization.monitorPanel/Contents/MacOS/Authorization. Using implementation from /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Aut horization.monitorPanel/Contents/MacOS/Authorization.
Dec 19 11:57:37 dhcp-xxx-xx-xxx-xxx [0x0-0x2f02f].com.apple.systempreferences[690]: objc[690]: Class O3Panel is implemented in both /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/Aut horization.monitorPanel/Contents/MacOS/Authorization and /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/TVO ptions.monitorPanel/Contents/MacOS/TVOptions. Using implementation from /System/Library/MonitorPanels/AppleDisplay.monitorPanels/Contents/Resources/TVO ptions.monitorPanel/Contents/MacOS/TVOptions.{quote}
The message above occurred each time I booted the mac pro and I think also when I changed resolutions on the monitors. This appeared to me to be a call to the specialized Apple Display extensions and preferences, not for non-apple displays.
Resolution:
I went into /System/Library/MonitorPanels/ and copied the AppleDisplay folder to the desktop and renamed it to XXXX.old. I deleted the AppleDisplay folder from its previous directory (I left behind the Arrange.monitorPanel, Display.monitorPanel, Profile.monitorPanel and VGADisplay.monitorPanel files). I then rebooted. No problems since. I can change resolutions all I want and my secondary monitor kicks right in, never staying black.
Note: this seems to work for me because I am using Dell monitors on the mac pro with the x1900xt graphics card. I wouldn't do this if you have monitor trouble, especially if you have an Apple Display, as it seems these files are important for those.

Perchè la data delle applicazioni scaricate non coincide con il giorno in cui io l'ho fatto?

la data delle applicazioni non corrisponde al giorno in cui io le ho scaricate
sono io a non capire? c'è una spiegazione? o il mio mac deve essere regolato?
grazie

La sola cosa disastrosa che leggo è il tuo commento.
In primis dovresti conoscere la differenza tra la garanzia legale del rivenditore e quella del produttore: nel caso di Apple la garanzia limitata di un anno va ad AGGIUNGERSI a quella legale del rivenditore.
Continuo:
-hai pagato per parlare con un numero verde? Il numero per l'assistenza è totalmente gratuito, quindi spiegami che numero hai chiamato.
-dici che l'iPad non funziona, però non aggiorni il sistema operativo perché la tua autorità si sostituisce a quella di chi lancia i nuovi aggiornamenti. E paghi per farti dire che iOS va aggiornato. Sei bravo.
-iOS 7 fa schifo? Deduco quanto poco sai utilizzare gli oggetti che hai acquistato al meglio delle loro potenzialità, figuriamoci se sei in grado di giudicarle.
Per il futuro ti consiglio di leggere i termini e le condizioni d'uso dei prodotti che acquisti.
Nel caso del tuo iPad avresti trovato tutto qui:
http://www.apple.com/legal/warranty/products/ipad-italian.html
avresti avuto così modo di informarti su cosa acquisti, anzichè lamentarti in seguito.
P.S. "Alterazioni del software"? Semplicemente i software si aggiornano, migliorano, cambiano.
Se non vuoi essere schiavo di alcun sistema operativo torna al Nokia 3330.

Non riusciamo ad attivare l'applicazione InDesign CC. Abbiamo seguito le indicazioni del documento "Le applicazioni Creative Cloud chiedono un numero di serie" ma non abbiamo risolto il problema

Non riusciamo ad attivare l'applicazione InDesign CC. Abbiamo seguito le indicazioni del documento "Le applicazioni Creative Cloud chiedono un numero di serie" ma non abbiamo risolto il problema
Sfogliando le impostazioni dell'Account abbiamo questo messaggio d'errore:

http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
Membership and Payments http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html
OR
Online Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

Widget ore locali non funziona il centro delle lancette e' alle ore 10 e non in centro all'orologio

il widget "ore locali" presente nel dashboard del mio macbookpro aggiornato a mavericks non funziona il centro delle lancette e' sopra le ore 10 e non in centro all'orologio come in tutti gli orologi perche'?

Il problema puo' presentarsi a seguito dell'aggiornamento si OSX , io ho risolto eseguendo queste operazioni :
Dalla Dashboard elimina l'orologio con le lancette sfalsate
vai su Libreria \ preferences qui dovresti trovare due file
widget-com.apple.widget.worldclock.plist
widget-com.apple.widget.worldclock.plist.lockfile
Cancellali facendo una copia di backup per sicurezza , riavvia il mac e prova a riaggiungere dalla dashboard ore locali , il problema dovrebbe essere risolto.
Se cosi non fosse recati su Libreria \ preferences \ Widgets \
Qui troverai un file chiamato Ore locali , fanne diverse copie magari uno sulla scrivania ed un altra di sicurezza all'interno di una cartella a tua scelta , fatto questo cancella Ore Locali dalla cartella Widgets e riavvia.
Una volta che il mac che si è riavviato vai sul file Ore Locali che hai salvato sulla scrivania , apri il menu e clicca su "Apri con" e selezione Dock , a questo punto dovrebbe reinstallare l'orologio da 0 risolvendo definitivamente il problema.
NB : Potrebbe essere necessario ripetere l'operazione dell'installazione una o due volte almeno a me è accaduto che si bloccasse , quindi fai diverse copie perchè una volta che parte l'installazione anche se non dovesse andare a buon fine il file che hai avviato "Ore Locali" sparisce.
Ciao
Danilo

Qual è il modo più facile e veloce per trasferire tutti i dati dal mio vecchio MacBook Pro (del 2008) al nuovo MacBook Pro 13' con display retina (che non ha lo slot per il cavo ethernet)? Grazie

Qualcuno sa dirmi qual è il modo più facile e veloce per trasferire tutti i dati dal mio vecchio MacBook Pro (del 2008) al nuovo MacBook Pro 13' con display retina (che non ha lo slot per il cavo ethernet)? Grazie

The fastest way would be Target Disk Mode:
http://support.apple.com/kb/PH10725
You would need a Firewire cable and an adapter for the retina Macbook.
http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapte r
Not fast, but perhaps more practical is to use an external hard drive with USB as an intermediary.
Ciao.

Ho scaricato icloud sul pc, vedo il pannello di gestione ma non vedo le cose del mio iphone non c'è nessuna schermata con foto app ecc. come devo fare?

ho scaricato icloud sul pc, vedo il pannello di gestione ma non vedo le cose del mio iphone non c'è nessuna schermata con foto app ecc. come devo fare?

ho scaricato icloud sul pc, vedo il pannello di gestione ma non vedo le cose del mio iphone non c'è nessuna schermata con foto app ecc. come devo fare?

HT204135 Can I use a Dell 964 printer on my Mac pro book,what do I need to do???

I have a Dell 964 printer and want to know if I can run it on my Mac pro book

Delll doesn't provide drivers for Macs for its non-postscript printers.

Mac pro & non apple displays

is it true that some non apple display don't seem to be liked by mac pro. i have a dell E207WEP 20" display and with my mac pro it makes diagonal line ripples. its only with my mac pro. my past quad G5 didn't have this problem. + nothing wrong with my mac pro bc it works fine with apple displays and few others. nothing wrong with my display bc it works with other computers. but i've noticed that when i took the display to the store the same problem occurred which i used it with a store mac pro. is it a mac pro + dell compatibility issue? apple even replaced my ATI HD2600 but it did not fix anything.

its very weird bc this monitor and mac pro isn't meant to be. what do you think about this: http://www.macnn.com/articles/08/03/10/radeon.2600.xt.for.mac.pro/
+
http://www.macnn.com/articles/08/02/25/mac.pro.ati.freezing.issue/

Upgrade Memory on 2009 4 core Mac Pro - Max? Non-ECC?

I've been doing research on what I can do to upgrade my RAM on my Mac Pro and I think I did something I wasn't supposed to do a while back.
During my last upgrade adventure, I apparently purchased and installed a 2GB stick of Non-ECC (PC3-8500 1066MHz) RAM to fill the one empty slot. The computer shipped with 3 bars of 1GB ECC memory.
Now, as I scan the web for info on what kind of memory I can get away with, everything I'm seeing says that you should not mix ECC and Non-ECC. But I've been running both for about a year now.
So my questions:
1. Should/can I use Non-ECC Memory?
2. If so, should I not be mixing?
3. What is the Max amount of memory my Mac Pro can handle? I'm seeing some info that says 4x2GB, and I'm seeing other info that says 4x4GB. Which is correct?
Thanks.

When you get a lot of memory in a computer, it is more likely so suffer an occasional memory error. This can cause serious problems that can lie hidden for months. It can take a very long time to isolate the problem and find the bad component and remove it, and the damage may have propagated throughout the files on your Hard drive.
Use System Profiler \[About this Mac > More Info] and click the "Memory" category. You will see an indication of whether each DIMM is ECC, and also a main status of "ECC ON" or "ECC OFF".
You are very lucky to own a Mac that has additional Hardware to support Error Correcting Code ECC Memory. IF ECC is active, you get enormous peace-of-mind. Any single-bit errors will be corrected, and double bit errors will stop your Mac immediately -- long before the problem can contaminate anything else.
I suggest you use only ECC memories, and make certain ECC is always ON.
Apple does not currently sell 4GB DIMMs, but others do, as noted above. Most sellers of 4GB DIMMs also warn you that you cannot mix 4GB DIMMs with 1GB or 2GB DIMMs.

Daisy chain two display port monitors (Dell U2913WM) to new Mac mini Thunderbolt?

Everything I read said that I could hook up a display port monitor to a Thunderbolt port on the mac mini. I purchased two display port monitors (Dell U2913WM) that can be daisy chained, and hooked them up. All I get is mirroring. Does anyone know how to turn off mirroring with this setup? I did not get the "uncheck mirroring" option in preferences until I hooked up the second via the HDMI port instead of a daisy chain. The problem with that is, I cannot take advantage of the full resolution through the HDMI. It seems I have wasted my money on two monitors.
Looking for advice on:
1) How to daisy chain these two Dell monitors to the mac mini and turn off mirroring and use an extended desktop, or
2) How to take advantage of the full resolution through HDMI port?
Any help would be greatly appreciated.
Thanks!

So re-reading this thread, I now realize you did exactly what I wanted to do but your issue was having a cloned vs. extended desktop. Oops!
I believe your "nothing plugged in" issue is the cable. I'm not sure that TB cables are backwards compatible with DP - I think it's only the ports. Do you see multiple monitors in "System Preferences > Displays" if you hook the monitors up like you described in your OP?
My Dell U2713H arrived today and it works like a charm with the supplied Mini-DP to DP cable. The built-in display on my 13" mid 2009 MBP still works if not in clamshell mode, although I will mostly use mine in my HengeDock. In the OSD of the monitor, you can access "Display Settings > Display Info" and it will show you the DP capability. Mine is only DP 1.1a and I believe to run 2 of these at full resolution you will need the bandwidth in DP 1.2 which includes MST (daisy-chaining). This could be your problem.
Can you access the same menu in your OSD and report back what your DP compatability is?
Thanks!
mgb

I have Adobe Photoshop Elements 10 and Adobe Premier 10 loaded on a Dell PC. Do I need to uninstall from the Dell before I install on a recently purchased Apple Mac Pro? There are separate disks for Mac and PC in the package.

I have Adobe Photoshop Elements 10 and Adobe Premier 10 loaded on a Dell PC. Do I need to uninstall from the Dell before I install on a recently purchased Apple Mac Pro? There are separate disks for Mac and PC in the package.

Generally, it's ok to install on two machines as long as they are both yours and you only use one version at a time.
BTW, this is the forum for Adobe Contribute.

Non mi si aprono delle applicazioni incluse su mac pro

Similar Messages

Maybe you are looking for