Non-moving stock report
Dear BW Gurus,
My client needs a "Non-moving stock report".I went thro the help.sap.com and just found one query for "Slow moving items" which is designed upon the Multiprovider 0IC_MP04.I just want to know whether i can use the above query for the Non-moving stock???
2)0IC_MP04 Multiprovider obtains data only from 0IC_C03 cube,so whats the real reason behind using a multiprovider rather than just 0IC_C03..????
Would appreciate ur help on this...
manythanks
arun
Hi Arun,
In R/3, you can go to MC50 transaction to see the non -moving stock report.
Also check MC46 & MC.9
I m not sure about the BW Business content report for non-moving stock.
What you can do is, see the satandard R/3 report and create report on IC_C03.
Cheers
Praveen
Similar Messages
-
Hi friends,
I have tried MC 50 and other reports for taking the List of non-moving stock. But, when I cross verify the report for the items with zero movement in MB51 for the movements 261, 601, 541, I observe further movements.
Kindly let me know the procedure for generating the non-moving stock report for the storage locations in a particular period.
Thanks,
Dhanapal NamasivayamHi Dhanpal
All the movements are in the table MSEG.
You need to build logic around this to come to non moving stock.
Thanks -
Reporting on Slow Moving / Non Moving Stock
Morning,
can anyone help on the above please.
How would i run a report on slow moving / non moving stock?
Regards
PMC46 you can get the slow moving items.
-
Slow moving /non moving stock
hi sap gures,
plz tell me what are the slow moving and non moving stock.give me SAP standard t codes for these report if its there in sap.Hi Prasad
for Non moving T- code *mc 50
for slow moving stock T-code-mc46*
Materials that have been consumed little or not at all over a long period of time are referred to as slow-moving items
Dead stock is the part of your warehouse stock that has not been used for a certain period of time
for further details pls refer
link:[http://help.sap.com/saphelp_45b/helpdata/en/c1/376130449a11d188fe0000e8322f96/frameset.htm]
Regards
Vikrant
Edited by: Vikrant Choudhary on Feb 23, 2009 12:06 PM -
Hi All,
May i know the T-Code to list Slow Moving, Fast Moving materials & also for ageing of materials.
Regards
RangHi Rang,
MC50 looks at the stock level for a material over a period of time and
identifies the lowest level that the material reached. That lowest level is
the dead stock quantity as, in theory, that stock was not required. It
works on the principle that in an ideal world scenario you would maintain
zero stock sitting in the warehouse because you were able to plan such that
every day you receive / produce the exact amount that you require to meet
all customer requirements with no surplus. An example would be that if you
met all demand over a 3 month period and the stock level in that time never
dropped below 500 then that would be the dead stock level as throughout the
period you supposedly could have had 500 less stock and still met all
requirements.
MC46 simply counts the number of days since the last issue against each
material - the more days the slower moving the stock.
Both the reports have value in that they can highlight problems which need
addressing - such as excessive stock or unpopular lines - but the results
they provide do need to be considered with a degree of caution...
Top-of-head examples could be that zero dead stock in MC50 is not an
achievable target if there is daily demand and the warehouse works on a FIFO
basis with a 2 day minimum to receive and then pick, and in MC46 materials
that are very seasonal will obviously show unfavourably at other times of
the year.
Hope its useful
reward points if deserved
Cheers!!!
Twinkle -
hi all,
i would like display stocks of the materials those haven't moved or consumed last two months. can you please tell me what are the transaction codes, except MC50, MC46 etc.Hi Melih,
I don't think this is an exact solution (maybe you can use it):
In MC.A you can put in the layout a field called 'Last gds issue' that shows when tha last goods issue took place. Using this you can filter the list.
BR
Csaba -
Technical field/table for Non moving report
Dear All,
I want the technical table name and field name for the following to make the Slow/NON moving stock report.
Material Number
Decription
stock in hand
batch no
UOM
Value
Exp Date
Mfg Date
Date of last consumption
Total No of days from last consumption
Where used FG
Date of Purchase
Vendor
Thanks & Regards,
Sandeep.for a non-moving report you have to look at the stock and need to compare it probably with movements directly or consumptions stored in infostructures.
depending on the basis you want analyze you may have to read much more tables than you expect and you certainly have the below listed fields in many tables
Material Number (MARD, MCHA1, MCHB)
Decription - MAKT
stock in hand - MARD, MCHB and many other tables in case of special stock
batch no . MCHA, MCH1, MCHB
UOM - MARA, MARM,
Value - MBEW - and may other tables in case of special stock
Exp Date - MCHA, MCH1
Mfg Date - MCHA, MCH1
Date of last consumption - MKPF, SO32
Total No of days from last consumption - have to be calculated by yourself in the report
Where used FG - STPO
Date of Purchase - EKKO
Vendor - EKKO, MCHA, MCH1 -
Non-Moving /Slow Moving stocks
Hi
Is any Standard Oracle Report available which give
us the Sub_inventory wise/Item wise stock which are
not moved (i.e. No transactions are happening since a
given date).
I hv check the Inactive Item Report available in
Inventory. What is exactly this report ?
Can anybody help us.
Regards.
Navdeephi,
The reports gives you an idea abt which stock is not used from many days or which is not even used or had no movements for the same...When you see the report you can give the periods in between which the system evaluates the materials movements...if the material has no movement in the given period it is called dead stock...and if the material is consumed out of it for given period then it is called slow moving stock..
Pls check both the reports carefully...
Check MC46 - slow moving items
MC50 - Dead stock(You can say dead stock as non moving stock )
If there is no selection shown by the system then it means that all the material/stock is used properly on time and is consumed properly...
Regards
Priyanka.P
Edited by: Priyanka Paltanwale on Dec 2, 2008 7:27 AM -
How to create report for Slow / Non moving inventory
Hi
I want to create one report Slow / Non moving inventory reports.
I need it in following form
Plant Material Desc UOM Current stock Value Last consumption date Last Movement date
I have found & confirmend table & fields names from which data should come into this report which is as follows
Plant(T001L - WERKS) Material(MARA - MATNR) Desc(MAKT - MAKTX) UOM(MARA - MEINS ) Current stock(MARD - LABST) Value(MBEW-SALK3.) Last consumption date (BUDAT - MKPF) Last Movement date(BUDAT - MKPF)
As I am creating this report at first time, I am not getting how to go ahead.
Do I need to create new datasource as existing datasource doesnt have all of these fields..
Please help me.
Dont send me links & documents which are there on sdn. I already have gone through it.
Thanks
SwatiHi
You have to create Generic Data source as you know the filed/tables names.
Hope you know how to build a Generic Delta or else.https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Create a Generic Data Source
a). Select the Data Source type and assign a technical name to it.
b). Choose Create The screen for creating a generic Data Source appears.
3. a) Choose an application Component to which the data source is to be assigned.
b) Enter the descriptive texts. You can choose these freely.c) Choose Generic Delta.
4. Specify the delta-specific field and the type for this field. Maintain thesettings for the generic delta:
Specify a safety interval. (NOTE: Safety interval should be set sothat no document is missed u2013 even if it
was not stored in the DB table whenthe extraction took place.
4. Select Delta type: New status for changed records (I.e.after-image); This can be used with Data target ODS (AIE). Additive Delta (I.e. aggregated data records) (ADD)Then choose Save.
6. After step 4, the screen of step 3 comes back. Now choose Save again. This will generate the data source. After generating the data source, you will see the Delta Update flag selected.
7. Choose Save again.
Hope it helps -
Slow moving items report for project stock
Hi ALL,
We are using project stock to manage all of our inventory. As the standard slow moving items report (MC46) does not contain project stock (special stock Q), we would like to develop a report then. "Slow moving" should be identified by material, plant, storage location and WBS.
Has any had this experience? What's the main data logic for this report?
Thanks a lot!!Dear,
Do One thing.. First goto MB5B - stocks on posting date and select to display only special stock indicator Q (Project). By this you can abstract all Project materials. Save the output into Excel. (The main aim is first abstract the project stock materials into a list with a suitable transactions - MB5B or MB52).
Then run MC50 or MC46 using these materials saved in excel file.
Try this.
Regards,
Syed Hussain. -
Dead stock or slow moving items reports
tell me any standard report t.code for dead stock or slow moving item..?
actually in our system mc50 is not working...in selection field it pick only one material ..not by material group so how i can get the dead stock report?
Regards
Rekha sharmapls tell me the input selection field for mc46...
scope of ranking list
no. of days up to last consumption from--to--
actually i fill up 180 days for perios last consumption ...in period to analyze selection field.
regards
Rekha sharma -
Report on Dead stock and Slow moving stock
Hi ,
On of my cleints requirement is to see the list of Dead stock and slow moving stock
I tried T.COde Mc50 and MC46 but I could not understand the report fully
In case of T.code MC50(dead stock) the input criteria for the report is just Plant,Pur org and Sales Org.
How does system identify an item as dead stock.
Is there any setting to define an item as dead stock before running report MC50?
In case of slow moving stock ,i want to see all the material for which no posting
happened for 60 days.In this case what value I need to select in T.Code MC46
Thx in advance
DevaHi,
While using MC46 report under Scope of ranking list, select the No. of days up to last consumption as 60 days.
And execute with the other selection parameters.
Regards,
DilliB -
sirs,
do we have any transaction code to view non mooving stock items.
other than mc46 and mc.9(details)
i tried with sap1 code too.Hi,
Why not try the MCBC report and sort it into lowest (i.e. zero) goods issues and receipts first?
This would show you "dead" stock.
I wouldn't rely on the date of last movement field, this can sometimes be spaces even if a movement has occured, but using the date of the last receipt, issue and movement is another option (click on the "choose key figures" icon or press F6 to add these columns. Have a play around with this it will probably do what you want (or near enough)
Steve B -
please let me know if any standard functionality available to have NON BULK ageing report.
Thankspls check MC46 and also from MC41 to MC50
Thx
Raju -
Valuation of Fast moving, Non-Moving Items, Dead Stock
Hi experts,
Would like to take your valuable suggestions. My Client is procuring certain materials and those materials could be stored for one year, two year, three year.
My client requires the material cost to be depreciated by 33% after one year, and material cost to be depreciated by 66 % for Second year and similarly for third year they want 100 % Deprication.
Are there any standard transactions to check the validity of material. which has crossed one year,two year or three year ?
How to depreciate the value yearly ?
I Just heard of Maintaing some ABC indicator in Material master and running the stock report.
And to reduce the value of material using MR21 ?
Weather it is correct or advice any other solution is there ?
Best Regards
Javeed Ahamed
SAP-MM-Consultant
waiting for your Positive Feedback.Hi Javeed,
There are two things involved in this.
Validity date for the material. This can be created by creating batch for material in MSC1N where you have the option to give SLED(Shell life expiration date). So those material belonging to particluar batch can not be used one SLED date is over. There are two other transactions through which you can chnage the batch properites. MSC2N( Change Batch), MSC3n(Display Batch) & MSC4n(Discplay Change).
For changing the material price you can very well use MR21.
I hope this helps.
Maybe you are looking for
-
Is there a way to have iPhoto NOT use the Photo Library on the Main drive?
I have thousands of pictures going waaay back to when iPhoto first came out. Most are on disc and on backup drives. I want to use the external drives to work from, within iPhoto. Is this possible? I just got a Mac Mini and since i have a lot of exter
-
Windows 7 Install Issues with Mac Pro
I have Mac Pro with Windows XP SP3 installed with Boot Camp on a separate, dedicated 250GB HD. I purchased an upgrade version of Windows 7 Home Premium. I hoped to install the 64-bit version. I upgraded, per Boot Camp I&S Guide, Boot Camp to version
-
Where did my iTunes credit go?
This afternoon I had $103.50 in credit in my iTunes account. Then it disappeared. I tried logging out of iTunes account and logging back in, but it was still gone. I then tried to play a tv show I'd purchased previous under the same account, and iTun
-
Video recording - why can't I switch cams like face time?
I do interviews and video blogs and I would like to be able to setup a clip with the camera facing me and then switch to camera on back to let subject speak. If you can do it with face time, PLEASE put in a fix so I can do it while recording. I would
-
Hi All, I know there's no solution to this topic at this point, but I'm hoping someone from RIM or someone who is knowledgeable about these things can answer. Will Japanese font input be available for 9630 at some point in future, whether through a s