Non persistent block association across reboot - help needed

Hi
Im faily new to Solaris and am currently facing the following problem. In a non-global zone I was able to create a file system by using zonecfg through the global zone. I added the entry in vfstab and was able to mount this properly in the non-global zone. At the time the df -k output in the global zone showed me
/dev/lofi/1 mounted on /foo. However i did a global boot of the system (autoboot=true) and realized that the block device exported was not persistent. After that I ran the "mountall" command in the non-global zone and got
checking ufs filesystems
/dev/rlofi/1: Invalid argument
Can't open /dev/rlofi/1
/dev/rlofi/1: CAN'T CHECK FILE SYSTEM.
/dev/rlofi/1: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
fsckall failed with exit code 1.
mount: /dev/lofi/1 is not this fstype
What am i doing wrong here ? I would appreciate any help. Thanks in advance.

yea i have along time ago and also made a update to xlr8's drive database. cause i fixed the problems with the drive in OS 9.2.2 (AKA no burn support with the built in burning app or iTunes, now have full support for burning with the finder burn and iTunes thanks to a edited PioneerCDR authoring support extension that someone edited for me. found out that the Apple CD/DVD driver extension was at fault for the locking up on wake up with hdd sleep enabled that started when i installed the Pioneer drive. fixed with intech CD/DVD speedtools 6.0).
When i did the first report on the drive database on xlr8yourmac i reported what problems i was having in OS 9.2.2 and i think i reported that i had no problems in jaguar, and was trying to obtain a driver or something to try to get it to work. but to no avail at first. after i fixed the problems i did a update report
in jaguar the drive had no problems but no burn support. installed patchburn and the drive worked 100% in jag no problems what so ever. im thinking it has somthing to do with one or all of the extensions with errors but i can be wrong.
i just wonder where ryan has been on the forums in OWC's site. cause i would like to submit my crash log panic log and the extensions with errors so he could help track down the problems to see if it cant be fixed. but ive tried emailing him but no replay's. and his last reply on the OWC forums was back in desember 2005 a few day's over a year
i know it isnt the drive cause it worked flawlessly in tiger 10.4.8 on my friends Digital Audio but i know why it worked fine cause it has the proper files for the DA to work cause its a supported system. i would like to try to help to get xpostfacto to work better on the Beige G3 system
in tiger if it is something to do with xpostfacto

Similar Messages

  • Inter Applet Communication across frames - Help Needed

    I am trying inter applet communication across frames. For this to happen I am using an intermidiate
    class which registers two applets and whenever any applet needs reference of other applet it gets it
    through this class.
    The page is an important part of a navigation link. So it is loaded many times while traversing through
    the site.
    Every time I load this page the applet does not paint itself (shows grey or background) and the browser
    stops responding. The machine needs to be restarted. This also happens when we keep that page idle for
    a long time (say 2 hours - session does not time out but applet hangs). I have used another thread object
    which is for utility and accesses the applet in the other frame every 10 seconds or so.
    When the applet hangs it does ot throw any exception or JVM error. This happens on certain machines
    evrytime and never on some machines. The applet hangs only in Microsoft IE 5 & 5.5 and never in Netscape
    4.x.
    What could be the problem?
    Can anyone help me with this problem? Its a deadline project and I can't get through.
    Thanks & Regards,
    Rahul

    Try making the register and getter methods of the intermediate class static synchronized. Then register the applets in their start() methods and unregister them in their stop() methods. Call the getter method of the intermediate class wherever you need access to another applet and never cache the instance you get. You may have to also synchronize all your start() and stop() methods to the intermediate class, as well as all methods that perform interapplet communication.
    Tell me what happenned ...

  • I have a few songs that I purchased that either will not play or play for a minute and quit.  None of the suggestions in the Help section apply to me.  What do I need to do?

    I have a few songs that I purchased that either will not play or play for a minute and quit.  None of the suggestions in the Help section apply to my problem.  What do I need to do?

    hello, normally such issues are caused by a firewall/security software which doesn't recognize & therefore blocks new firefox versions. please try to remove all program rules for firefox in your firewall and let it detect the program again: [[Fix problems connecting to websites after updating Firefox]]

  • Help needed in defaulting Dynamic assignment blocks

    Hi All,
    We are trying to default assignment blocks based on the configuration saved against each object type.
    Procedure followed is as below
    Created 2 configurations, one for sold to party and the other one for ship to party in the BP_Head cpmponent for the Overview page. Two configurations of the overview page are saved against a role config key but with a variant of object type
    Created two logical link IDs one each for sold to party and ship to party
    Make these two logical link IDs available in the UI as direct link groups
    Upon clicking sold to party the configuration saved against that(Set of assignment blocks in the overview page) needs to be called (Remember we saved this configuration with a variant of object type)
    Similarly when clicking on the ship to party link corresponding configuration (Set of assignment blocks in the overview page) needs to be displayed
    Any inputs on this will be of great help.
    Regards,
    udaya

    you need to redefine the method DO_CONFIG_DETERMINATION of your controller
    there you get the role and any other needed values, and you define the OBJECT_TYPE and SUBTYPE that will be used as key fields for the configuration

  • Since upgrading to Lion OS, the wifi connectivity keeps blocking up intermittently and we need to manually keep switching on and off the wifi utility to get the connection back. even locking the preferred wifi network in system preferences does not help.

    Since upgrading to Lion OS 10.7.1, the wifi connectivity keeps blocking up intermittently and we need to manually keep switching on and off the wifi utility to get the connection back. even locking the preferred wifi network in system preferences does not help. This never used to happen with Snow Leopard

    This is a big thank you to Rys Sinnefeldt who posted this fix.
    Rys has made this fix very easy to do and takes literally 2 mins. It involves replacing the Atheros Lion driver 4.0 and replacing it with the snow leopard driver. Don't worry, Rys has made this so simple to do even I could do it and so far I have had no more wifi drops.
    follow this link
    http://rys.pixeltards.com/2011/09/04/osx-lion-wifi.html
    Thanks again to Rys.

  • How to create a apple ID without credit card needed i want a none credit card.. Please help me... Thank you hope u replied as soon as possible.. Thank you again..

    How to create a apple ID without credit card needed i want a none credit card.. Please help me... Thank you hope u replied as soon as possible.. Thank you again..

    Hello, chard2say22. 
    Thank you for visiting Apple Support Communities.
    To create an Apple ID without a credit or debit card, there is a specific series of steps that have to be processed in order to allow the payment to be set as none on creation of the account.
    Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card
    http://support.apple.com/kb/HT2534
    If the specific steps have not been processed, a credit or debit card will be required to complete the setup of the account.
    However, it can be removed and payment method changed to none as long as there is not an outstanding balance.  At this point an iTunes gift card can be used as form of payment.
    iTunes Store: Changing account information
    http://support.apple.com/kb/ht1918
    Cheers,
    Jason H.

  • Need to cache non-persistent field value

    Is it possible to have a non-persistent field in PC class which value will be updated by app, stored in DataCache and then can be used when PC instance will be taken from DataCache next time?
    I tried to map my field as persistence-modifier="transactional" or "none". I do see in my log that the object is taken from cache, but that transient field value is always null after object retreival.
    Thanks, Denis.

    Thanks for the hint, Abe.
    I got what I need via custom filed mapping. If anyone interested:
    public class CacheFieldMapping extends ColumnFieldMapping {
    public CacheFieldMapping(FieldMetaData meta) {
    super(meta);
    public String getMappingType() {
    return getClass().getName();
    protected int getJDBCType() {
    return Types.OTHER;
    public boolean map() {
    return true;
    public void fromMappingInfo(MappingInfo info, boolean adapt) {
    // do nothing...
    public void toMappingInfo(MappingInfo info) {
    // do nothing...
    public void refSchemaComponents() {
    // do nothing...
    public int select(Select sel, KodoStateManager sm, JDBCStoreManager store,
    JDBCFetchConfiguration fetch, int eagerMode) {
    return -1;
    public void load(KodoStateManager sm, JDBCStoreManager store,
    JDBCFetchConfiguration fetch, Result res) throws SQLException {
    // do nothing...
    public void load(KodoStateManager sm, JDBCStoreManager store,
    JDBCFetchConfiguration fetch) throws SQLException {
    sm.storeObject(getIndex(), null);
    public Object loadProjection(JDBCStoreManager store,
    JDBCFetchConfiguration fetch, Result res, Joins joins) throws SQLException
    return null;
    public Boolean isCustomInsert(KodoStateManager sm) {
    return Boolean.TRUE;
    public Boolean isCustomUpdate(KodoStateManager sm) {
    return Boolean.TRUE;
    protected void update(KodoStateManager sm, Row row) throws SQLException {
    // do nothing...
    "Abe White" <[email protected]> wrote in message
    news:[email protected]..
    No, this is not possible. The data cache acts exactly like the
    database, only storing persistent values.

  • [SOLVED] netcfg static IP not persisting across reboots in VM

    I ran into an issue with netcfg static IP not persisting across reboots in a VM. I figured it out, but it took me awhile as a brand new user, so I thought I'd post it.
    Setup
    Using VMWare Workstation 8.0.3 build-703057 with bridged networking
    Host OS: Linux Mint 14 64-bit
    Guest OS: Arch Linux 2013.03.01 x86_64
    Given a fresh install on the guest, setup netcfg:
    cd /etc/network.d
    cp examples/ethernet-static ./myprofile
    nano myprofile
    # customize this file. I also added NETMASK='255.255.255.0'
    systemctl enable netcfg@myprofile
    systemctl start netcfg@myprofile
    Test the configuration. It should be successful:
    ping google.com
    Problem
    See if the changes survive a reboot.
    reboot
    ping google.com
    I got the error "connect: Network is unreachable".
    Check the logs:
    journalctl
    G
    I found the following netcfg failure..
    [email protected]: main process exited, code=exited, status=1/FAILURE
    ..prior to the following device initialization:
    kernel: e1000 0000:02:00.0 eth0: Intel(R) PRO/1000 Network Connection
    system-udevd[117]: renamed network interface eth0 to emp2s0
    Solution
    It looks like netcfg is being started before the device it depends on has been initialized. Inform systemd of the
    dependency so they start in the proper order:
    # nano /etc/systemd/system/multi-user.target.wants/[email protected]
    # Add the following to [Unit]. Remember to replace enp2s0 with your device name.
    Requires=sys-subsystem-net-devices-enp2s0.device
    After=sys-subsystem-net-devices-enp2s0.device
    Test again:
    reboot
    ping google.com
    This should now be successful.

    fukawi2 wrote:
    $ man netcfg-profiles wrote:
           Miscellaneous options
               IPCFG
                   Array of arguments to pass to ip. The power of this options is
                   that it allows both simple and complicated routing
                   configurations, within the framework of netcfg.
               SKIPNOCARRIER
                   ‘yes’/‘no’. Don’t abort interface setup if no carrier is
                   found.
    Thank you, [Solved].

  • Video freeze after 9 second playing then need to reboot, help?

    video freeze after 9 sec play, then need to reboot, help?

    video freeze after 9 sec play, then need to reboot, help?

  • Suddenly I can't move files to trash, whe I try to drag them to it there is a cirle with a diagonal line across. HELP!

    Suddenly I can't move files to trash, whe I try to drag them to it there is a cirle with a diagonal line across. HELP!

    Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • Just upgraded my iPad to IOS5 and when the download was completed, a window said that there was an error and it could not restore.  Now I have a black screen with the Apple logo and the circle lines.  None of the buttons respond. Help, please!!

    Just upgraded my iPad to IOS5 and when the download was completed, a window said that there was an error and it could not restore.  Now I have a black screen with the Apple logo and the circle lines.  None of the buttons respond. Help, please!!

    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. Maybe this will let the iPad reboot and then you may need to restore again but see if this helps to start the iPad first.

  • Problem in Execute query on non-database block and database block together

    Hi All,
    In my form,i have
    1. First block is Non-database block with one non-database item.
    2. Second and third blocks are database blocks.
    Now the problem is that i want to perform execute-query for all the blocks.
    If the cursor is on the non-database item of 1st block and i clicks on the "Enter-query" then i am getting message " This function can not be performed here".
    If i click on the item of the database block and then clicks on the "Enter-query" and then "execute-query" it's working fine.
    But i don't want to do in this way.
    My cursor will be on the First block only and then it should perform execute-query.
    I am using this non-database item to copy value of this item to the item of the database block item.
    I think i make you understand about my problem.
    I am using forms 10g on Window xp.
    Please help me.

    Hi!
    Simply create a enter-query trigger on the non-database-block:
    begin
    go_block ( 'database_block' );
    enter_query;
    end;If your search criteria is in the non-database-item in the first block,
    you actually do not need the enter_query build-in.
    Just create a execute-query trigger on the first block like:
    begin
    go_block ( 'database_block' );
    execute_query;
    go_item ( :System.trigger_item );
    end;And in a pre-query trigger on the database-block copy the
    value of your seach item into the item you want to search for.
    Regards

  • 1941W configuration help needed

    Our Deployment Scenario:-
    1941W Gigabit Ethernet 0/0 is connected to the PPOE connection of the ISP.
    Gigabit Ethernet 0/1 is connected to the wired LAN
    I have created 2 wireless radio Cisco_Kamran_BGN which is operating at 2.4 Ghz Devices and Cisco_Kamran_A which is operating at 5Ghz Devices.
    I have created 2 VLans for the Wireless.
    Vlan 10 for Cisco_Kamran_A        192.168.10.x
    Vlan 11 for Cisco _Kamran_BGN   192.168.11.X
    The problem is the Wireless users are not getting the IP address from the respective DHCP server which has been configured on the Router.
    Can please any from the community help me and show me where I am missing the configuration.
    Please find my router  & ap configuration below.
    Router Configuration
    Router#
    sh run
    Building configuration...
    Current configuration : 3022 bytes
    ! No configuration change since last restart
    version 15.1
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname Router
    boot-start-marker
    boot-end-marker
    enable secret 5 $1$TdQt$npYeaf/W0kRElcfMggzJ31
    no aaa new-model
    service-module wlan-ap 0 bootimage autonomous
    no ipv6 cef
    ip source-route
    ip cef
    ip dhcp excluded-address 192.168.1.1 192.168.1.50
    ip dhcp excluded-address 192.168.10.1 192.168.10.10
    ip dhcp excluded-address 192.168.11.1 192.168.11.10
    ip dhcp pool DHCP
    network 192.168.1.0 255.255.255.0
    default-router 192.168.1.1
    dns-server 195.229.241.222 213.42.20.20
    ip dhcp pool Cisco_Kamran_A
    network 192.168.11.0 255.255.255.0
    default-router 192.168.11.1
    dns-server 195.229.241.222 213.42.20.20
    ip dhcp pool Cisco_Kamran_BGN
    network 192.168.10.0 255.255.255.0
    default-router 192.168.10.1
    dns-server 195.225.241.222 213.42.20.20
    multilink bundle-name authenticated
    crypto pki token default removal timeout 0
    license udi pid CISCO1941W-E/K9 sn FCZ1553C1VK
    hw-module ism 0
    redundancy
    bridge irb
    interface Embedded-Service-Engine0/0
    no ip address
    shutdown
    interface GigabitEthernet0/0
    ip address 192.168.1.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly in
    duplex auto
    speed auto
    interface wlan-ap0
    description Service module interface to manage the embedded AP
    ip unnumbered GigabitEthernet0/0
    arp timeout 0
    no mop enabled
    no mop sysid
    interface GigabitEthernet0/1
    no ip address
    duplex auto
    speed auto
    pppoe enable group global
    pppoe-client dial-pool-number 1
    interface Wlan-GigabitEthernet0/0
    description Internal switch interface connecting to the embedded AP
    switchport mode trunk
    no ip address
    interface Vlan1
    no ip address
    interface Vlan10
    ip address 192.168.10.1 255.255.255.0
    ip access-group DSL_ACCESSLIST in
    ip nat inside
    ip virtual-reassembly in
    interface Vlan11
    ip address 192.168.11.1 255.255.255.0
    ip access-group DSL_ACCESSLIST in
    ip nat inside
    ip virtual-reassembly in
    interface Dialer1
    ip address negotiated
    ip nat outside
    ip virtual-reassembly in
    encapsulation ppp
    dialer pool 1
    ppp authentication pap callin
    ppp pap sent-username xxxxxx password 0 xxxxxx
    ppp ipcp route default
    ip forward-protocol nd
    no ip http server
    no ip http secure-server
    ip nat inside source list DSL_ACCESSLIST interface Dialer1 overload
    ip access-list extended DSL_ACCESSLIST
    permit ip 192.168.0.0 0.0.255.255 any
    control-plane
    line con 0
    password xxxxxx
    login
    line aux 0
    line 2
    no activation-character
    no exec
    transport preferred none
    transport input all
    transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
    stopbits 1
    line 67
    no activation-character
    no exec
    transport preferred none
    transport input all
    transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
    line vty 0 4
    password xxxxxx
    login
    transport input all
    scheduler allocate 20000 1000
    end
    Router#
    Router#
    Router#
    Access Point Configuration
    ap#
    ap#
    ap#
    sh run
    Building configuration...
    Current configuration : 2603 bytes
    version 12.4
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    service password-encryption
    hostname ap
    enable secret 5 $1$JxdQ$a2/00bWJuhUKP9QLC94YD/
    no aaa new-model
    dot11 syslog
    dot11 ssid Cisco_Kamran_A
       authentication open
       authentication key-management wpa
       guest-mode
       wpa-psk ascii 7 1045081417161C5A555C7A7B
    dot11 ssid Cisco_Kamran_BGN
       authentication open
       authentication key-management wpa
       guest-mode
       wpa-psk ascii 7 020D05561907017015165949
    username Cisco password 7 14341B180F0B
    bridge irb
    interface Dot11Radio0
    description 802.11bgn radio
    no ip address
    no ip route-cache
    encryption mode ciphers aes-ccm
    broadcast-key change 3600
    ssid Cisco_Kamran_BGN
    antenna gain 0
    station-role root
    bridge-group 11
    bridge-group 11 subscriber-loop-control
    bridge-group 11 block-unknown-source
    no bridge-group 11 source-learning
    no bridge-group 11 unicast-flooding
    bridge-group 11 spanning-disabled
    interface Dot11Radio1
    description 802.11a radio
    no ip address
    no ip route-cache
    encryption mode ciphers aes-ccm
    ssid Cisco_Kamran_A
    antenna gain 0
    no dfs band block
    channel dfs
    station-role root
    bridge-group 10
    bridge-group 10 subscriber-loop-control
    bridge-group 10 block-unknown-source
    no bridge-group 10 source-learning
    no bridge-group 10 unicast-flooding
    bridge-group 10 spanning-disabled
    interface GigabitEthernet0
    description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
    no ip address
    no ip route-cache
    bridge-group 1
    no bridge-group 1 source-learning
    bridge-group 1 spanning-disabled
    interface GigabitEthernet0.10
    description 802.11a bridge
    encapsulation dot1Q 10
    no ip route-cache
    bridge-group 10
    bridge-group 10 subscriber-loop-control
    bridge-group 10 block-unknown-source
    no bridge-group 10 source-learning
    no bridge-group 10 unicast-flooding
    bridge-group 10 spanning-disabled
    interface GigabitEthernet0.11
    description 802.11bgn bridge
    encapsulation dot1Q 11
    no ip route-cache
    bridge-group 11
    bridge-group 11 subscriber-loop-control
    bridge-group 11 block-unknown-source
    no bridge-group 11 source-learning
    no bridge-group 11 unicast-flooding
    bridge-group 11 spanning-disabled
    interface BVI1
    ip address dhcp client-id GigabitEthernet0
    no ip route-cache
    ip http server
    no ip http secure-server
    ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
    bridge 1 route ip
    line con 0
    no activation-character
    line vty 0 4
    login local
    end
    ap#
    ap#
    ap#

    Hi Stepehen,
    Did the configuration as per your advice  but i am getting the below mentioned error which i have highlighted it in red. Please advice what needs to be done.
    Home
    Re: 1941W configuration help needed
    created by Stephen Rodriguez in Getting     Started with Wireless - View the full discussion
    conf t
    interface     Dot11Radio0
    no ssid     Cisco_Kamran_BGN
    no encryption mode     ciphers aes-ccm
    exit
    interface     Dot11Radio1
    no encryption mode     ciphers aes-ccm
    no ssid     Cisco_Kamran_A
    exit
    dot11 ssid     Cisco_Kamran_A
    vlan 10
    dot11 ssid     Cisco_Kamran_BGN
    vlan 11
    exit
    interface     Dot11Radio0
    encryption vlan 11     mode ciphers aes
    ssid     Cisco_Kamran_BGN
    exit
    interface     dot11radio0.1
    encapsulation     dot1q 1 native
    bridge-group 1
    interface     dot11radio 0.11
    encapsulation     dot1q 11
    bridge-group 11
    Configuration of     subinterfaces and main interface
    within the same bridge     group is not permitted
    exit
    interface     Dot11Radio1
    encryption vlan 10     mode ciphers aes-ccm
    ssid     Cisco_Kamran_A
    interface     dot11radio1.1
    encapsulation     dot1q 1 native
    bridge-group 1
    interface     dot11radio1.10
    encapuslation     dot1q 10
    bridge-group 10
    Configuration of subinterfaces and main     interface
    within the same bridge     group is not permitted
    end
    wr
    Reply to this message by going to Home
    Start a new discussion in Getting Started with Wireless at Home

  • Problem creating non-persistent Child Objects

    I have the need to create a non persistable child object in the
    jdoPreStore of a parent object. I then perform some tests on the parent
    to determine if the child object needs to be persisted or not. If I leave
    the child non persistent it still writes to the database.
    I was performing the follwoing piece of code
    Class Parent {
    // The relationship is a 0 to many
    public Child createChild() {
    Child child = .....//create non persistent object
    child.setParent(this);
    getChild().add(child);
    It appears that if I remove the getChild().add(child). It does not
    persist (as desired).
    Is this correct behaviour?? I dont think that it should be, but if it is
    then I have a further problem.
    If that child object inherits from another object and you remove the
    getChild().add(child) kodo outputs an invalid object to the database. It
    doesnt insert a row to the child table. But it inserts a row to the
    childs inherited object table. This is now an invalid object and will
    fail upon loading.
    Any help on this would be appreciated.
    Thanks
    Luke.

    JDO has something called persistence by reachability. This means that
    objects do not have to explicitly be marked as to be persistent as JDO
    will traverse the object graph to ensure that all nodes are persistent.
    I think you are seeing this behavior combined with another side
    behavior: Kodo requires that both sides of a relation be set.
    Basically, keep your objects in synch (set both sides of the relation).
    And if you want to hold onto a reference to non-persistent object
    before you decide what to do with it, add a transient field or a field
    marked "persistence-modifier="none"" in your metadata and then process
    those transient fields in jdoPreStore ().
    i.e.
    if (//businessLogic is true)
    persistentField = transientField;
    Luke wrote:
    I have the need to create a non persistable child object in the
    jdoPreStore of a parent object. I then perform some tests on the parent
    to determine if the child object needs to be persisted or not. If I leave
    the child non persistent it still writes to the database.
    I was performing the follwoing piece of code
    Class Parent {
    // The relationship is a 0 to many
    public Child createChild() {
    Child child = .....//create non persistent object
    child.setParent(this);
    getChild().add(child);
    It appears that if I remove the getChild().add(child). It does not
    persist (as desired).
    Is this correct behaviour?? I dont think that it should be, but if it is
    then I have a further problem.
    If that child object inherits from another object and you remove the
    getChild().add(child) kodo outputs an invalid object to the database. It
    doesnt insert a row to the child table. But it inserts a row to the
    childs inherited object table. This is now an invalid object and will
    fail upon loading.
    Any help on this would be appreciated.
    Thanks
    Luke.
    Steve Kim
    [email protected]
    SolarMetric Inc.
    http://www.solarmetric.com

  • Non-Persistent VDI's stuck in Remediation Status pending in SCEP

    Currently have 2 VDI's stuck in a remediation state - pending. The action required states Endpoint Protection Pending Reboot.
    Since these are non-persistent devices the virus has been removed after a restart as they are back to a clean image however SCCM/SCEP does not seem to recognise the restart state. 
    How can I clear this so that the clients report back as re mediated? Note I have run a full scan and restarted the devices.
    Cheers
    Paul | sccmentor.wordpress.com

    Hi,
    Please examine ExternalEventAgent.log on the client to see whether the state messages have been forwarded successfully.
    And check EPCtrlMgr.log on the site system server that records details about the synchronization of malware threat information from the Endpoint Protection role server into the Configuration Manager database.
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for

  • Report for PO listing based upon values

    Hi I wish to have list of standard reports from which I can have the list of Purchase orders as per below example POs upto  INR 10, 00000/- POs  INR 10,00001 to 50,00000 POs USD 10,000$ to 50,000 Regards

  • Networking locks up regularly - can connect but can't transfer data

    About once a day the networking on my Imac G5 dies. I can make outgoing TCP connections which connect to their remote destination, but no data is retrieved. For example, trying to retrieve a web page from a server on my LAN: telnet 10.0.1.7 80 Trying

  • Migrating from iMac G5 (Tiger) to Macbook Pro (Leopard) over a network

    I just got my new Macbook (running Leopard) and trying to migrate all my files/settings from my iMac over (running Tiger). The instructions tell me to use Migration Assistant. On new Mac, I open Migration Assistant and select migrate "From other Mac"

  • White screen with flashing question mark

    AAll I get is white screen with flashing question mark.  I've inserted OS disc but it won't run.  Can anyone help plz?

  • How long does a restore take?

    Hello, I am currently doing my first restore on my two week old iPhone. I am now on the screen that says "restoring from backup". Can anyone please tell me how long I can expect this stage to take? It seems like the progress is very slow... About one