Non-printing text frame for use in exported pdf
Hi everyone,
I have a couple of words in a text frame and I've set the text frame to be be non-printing in the attributes panel. I was hoping that by doing this, that when I exported to pd, it would show in the pdf file but not print, but as it happens it doesn't show at all in the pdf.
Is there a way to mark a text frame as non-printing in Indesign but still have it show in the pdf and not print in the pdf?
Would be grateful for any advice.
It might work to put it on it's own layer, mark the layer as non-printing, so it won't print from ID, but export a layered PDF (you might have to include non-printing layers to get it inthe PDF, but I don't think so). In Acrobat pro you can then change the layer properties to visible, but non-printing. It's a real pain to do this.
Similar Messages
-
How can I sequence non-threaded text frames for localization?
Is there any way to sequence non-threaded text frames? I want the text to appear in order in SDL (translation software).
Thanks all. RRLast time I checked, the Articles tool only affected reading order in PDF. I know of no translation tools that consistently do a good job harvesting text from PDFs, and SDL's tools only accept IDML. TextStitch is useful because you can just let it auto-stitch the whole document if all frames should be read in a top-down, left-right order.
However, StoryCollector and other SDL tools also collect frames in that order. So, using the QuickStitch function of TextStitch, you can rapidly thread all the frames in a document. Note that you will want to ungroup any group that contains a text frame before you begin - TextStitch gives you visual feedback, "blackening" frames that are going to be included in the threaded story, but it doesn't black out threaded frames in groups, so if you want to be able to see what you are doing, then you'll have to ungroup. -
How to print text on container using oop on alv list
Hello Guru's,
pl guide me how to print text on container using alv list-display which have interactive events using oop classes/methods ...
I want to print hard coded text on coantainer , on double clicking it will call another screen.
Pl Help..
Message was edited by:
paresh sonavaneHi Paresh,
1. Go to the Layout and Create One custom container box and give name it.
2. Custom Container is the one type of tool and its used for Displaying the Reports
with the use of ABAP Objects.
3. Go to se38 and Write The Following Code.
tables ZTEAM_GD.
DATA : OBJ TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
OBJ1 TYPE REF TO CL_GUI_ALV_GRID.
DATA IT_TEAM LIKE TABLE OF ZPLAYER_BAT_DET .
SELECT * FROM ZPLAYER_BAT_DET INTO TABLE IT_TEAM.
CREATE OBJECT OBJ
EXPORTING
CONTAINER_NAME = 'ALV'. -
> Give ur Container Name
CREATE OBJECT OBJ1
EXPORTING
I_PARENT = OBJ.
CALL METHOD OBJ1->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_STRUCTURE_NAME = 'ZPLAYER_BAT_DET'
CHANGING
IT_OUTTAB = IT_TEAM.
*CALL METHOD OBJ1->SET_DROP_DOWN_TABLE
EXPORTING
I_STRUCTURE_NAME = 'ZTEAM_GD'
CHANGING
IT_OUTTAB = IT_TEAM.
CALL SCREEN 9000.
*& Module USER_COMMAND_9000 INPUT
text
MODULE USER_COMMAND_9000 INPUT.
CASE SY-UCOMM.
WHEN 'EXT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " USER_COMMAND_9000 INPU
Thanks.
Reward If Helpful. -
Create non-printing text?
Can text in Pages be marked as non-printing? If not, is there a work around? Thank you.
Hello
As far as I know this feature is unavailable.
A workaround would be to use "white ink" for these pieces of text.
An other one would be to put these "non-printing" text in comments.
"Hide Comments" before printing.
Yvan KOENIG (from FRANCE mardi 20 mai 2008 09:34:11) -
Hello all! I've been working from the FM book for almost 2 hrs trying to figure this out, so now I need your help. I am almost to this point:
Problem I: Importing a graphic
First of all, which is the best way?
-Insert an anchor frame and then import the graphic into the frame OR
-Just insert the graphic and get the anchor frame by default
Here’s my importing and sizing problem:
I hit ENTER to make a new paragraph line (side note: the book says make a new paragraph by hitting ENTER, import the graphic, and then ESC m+p to shrink wrap so that you can avoid the graphic overlapping the above text. I do exactly this (I believe), but my graphic still overlaps the above text when I shrink wrap. What the...?)
I insert an anchored frame with position Below Current Line and alignment CENTER (I chose to the insert anchor frame, since this way I have control over its alignment, correct?)
Anchor frame is selected when I import my image file
In the Imported Graphic Scaling box, what do I select if my file is HUGE (3072x2304)?
-Fit in selected rectangle (when I choose this the image imports small and fits in the anchored frame with lots of white space around it)
-72 dpi
-75 dpi
-150 dpi
-300 dpi
-Custom dpi: 96 (I’ve tried changing this to a smaller number (20) and I get a message that says “cannot handle a bitmap of that size.”)
I’ve had the best luck with selecting FIT IN SELECTED RECTANGLE, and then I just scale the image with my shift+click. If I choose 72 dpi or Custom, my image imports HUGE, and I just can’t manage it. I don’t have a method for resizing these images outside of FM.
Problem II: Creating a text frame for a caption
Once I have chosen FIT IN SELECTED RECTANGLE, I try to insert a text box underneath the image (and inside the anchor frame) to type a caption in it.
In Create New Text Frame box, the default is Number 1 and Gap 0.25. I click SET.
Next, I double-click inside the text frame to begin typing, but the cursor is OUTSIDE and UNDERNEATH the text frame! What the heck??? I’ve done this before and it has worked just fine. Then I had another problem where when I did get the text inside the text frame, I would select the text frame to move it, and it left the text behind! (I moved the frame but the text was separated from it and left behind.)
THANK YOU in advance for your help. I hope I wrote this out clearly enough. I appreciate those who respond. P.S. I'm in FM 10.My favorite method is to use a one-cell table for graphics and captions.
Import the graphic by reference into the table cell. Create a "Caption"
paragraph tag and assign it to the table title. (The title can be set
for above or below the table cell. I prefer below.) Now, whenever you
insert this table, it will be ready for graphic and caption. Another
advantage of this method is that graphic and caption always stay
together at page/column breaks.
When you create the table format above, assign it to have a -2.0 space
above. Then, create a paragraph tag, such as "TableAnchor" and assign it
-2.0 pt font size and -2.0 space below. (You can substitute a different
point size, but it must be the same in all three places. The TableAnchor
paragraph will hold the table and these settings let tables fit against
the top margin where necessary. Otherwise, they dip down a bit.
I wrote this from memory, so I hope I remembered all the steps! -
Looking to create editable PDF forms with drop downs and text boxes for use on a Mac computer and iPad. Which product do I need to purchase? Do not need anything fancy
Basically you would need Acrobat. However, it is now also possible to create basic form fields using just the free Reader. In fact, I've been working on a tool that allows you to do it, so if you're interested in it please contact me privately.
-
How to print double sided for SAP without exporting
Hi Friends,
Could you explain me that how to print double sided for SAP without exporting? Thanx.Hi,
As per your query this is printer facility not to SAP. You have to define your printer in double printing by default and get all the printout both side from any software like SAP,Excel,Word etc.
Anil -
Using Adobe Export PDF, I converted a PDF document into MS Word. However, all the images are missing--replaced by black rectangles. How can I fix this? Thanks for any assistance.
Hi Ravinder,
As I mentioned in my email to you, I wasn't able to reproduce the behavior your described. The images appear properly.
Please let me know if you have any questions.
-David -
"Failed to convert using Adobe Export PDF"
for the past 24 hours, I've been attempting to convert a PDF to DOC but I keep getting "Failed to convert using Adobe Export PDF" Please help. I've logged in via the website and the convert tool, yet I still get the same message.
Thanks in advanceHello EPcommute
We aplogize for the inconvenience, it could be a temporary glitch. Request you to try after some time.
~Deepak -
Error in using adobe export pdf
When I converted , using adobe export pdf, a pdf file into Word I found that some of the diagrams and words on the diagram did not transfer. How do I correct this?
Try disabling the 'Recognize text' function. It could be that the OCR engine tried to identify your diagrams as text (which probably wouldn't go so well. )
-David -
Q: How do I convert a pdf file to Word using Acrobat Export PDF - all my attempts are scrambled
Do you subscribe an Adobe Export PDF account? If you do not have an account, please go to https://www.acrobat.com/exportpdf/en/home.html?trackingid=JPZKN to subscribe.
If you have an account, make sure verify your email address and sign in from https://exportpdf.acrobat.com/SignIn.html
Jyh-Jiun Liou -
Can I find some help about why my Adobe online service suddenly start giving me an error message that says FILE FAILED TO BE CONVERTED USING ADOBE EXPORT PDF ONLINE?
Are you trying to convert through Adobe Reader (what version?), or directly at the https://cloud.acrobat.com/exportpdf website?
[topic moved to Acrobat.com Services forum] -
Rec'd error msg "File failed to be converted using Adobe Export PDF online"
Rec'd error msg "File failed to be converted using Adobe Export PDF online" when attempting to save a .PDF as a .DOC
Are you trying to convert through Adobe Reader (what version?), or directly at the https://cloud.acrobat.com/exportpdf website?
[topic moved to Acrobat.com Services forum] -
When using Adobe Export PDF - I cannot save a document after converting from PDF. Why not?
What happens when you click the Save/Download button after the file conversion is complete?
-
Can i use adobe export pdf on an imac? [was: brian newcombe]
Can i use adobe export pdf on an imac?
Hi Brian,
Welcome to Adobe Forum,
ExportPDF is an online convertion program. It is not OS dependent. You can use this service anywhere. You would just require a web browser and working internet connection.
Let me know if you have any other question.
Regards
Rajshree
Maybe you are looking for
-
Creating a report as a navigation path for other pages
Hi, I would like to create a report which presents a list of an application's pre-defined reports (each report is created in a separate page). This report should include the following columns: 1) Report Number (1, 2 , 3, ...) 2) Report Name 3) Report
-
Why are some classes and methods truncated in new APIS??
-
Purchase Requisition Released History
Hello! I would like to know in which MM table, have the Release History for a Purchase Requisition. For Example, The system genarate a release strategy for 3 levels. After the correspoding approvals, ¿in which MM table the system save this Release H
-
I can't find the BAPI or Function to post outgoing payments , i need to do the function or bapi not bdc . Please help...
-
Global selection modifications problem in LR2
Hello All, I have discovered a bug in LR 2 (including the past and current version 2.3) which I would like to confirm if others have encountered this issue or know of a fix or workaround. When I select a range of images or all the images and then I w