Non printing using canon i80 with bonjour on an xp machine

printer drivers are current, TC software is current. printer works fine when connected on usb. using latest bonjour software, using latest java. Printer shows correctly in bonjour printer wizard. any help or suggestions welcomed.

Similar Messages

Cannot print using Canon W6400 with Leopard - help????

There is an archived discussion with this exact problem, however it doesn't seem to have been resolved. I'm hoping someone can help with the issue now....
I recently upgraded to a MacBook Pro running Leopard. I cannot get my W6400 to print with it, despite re-installing, checking cables, etc. It worked fine a few weeks ago with my old laptop, so I'm assuming it's Leopard. The error message that comes up says 'Operation Could not be completed. client-error-not-possible'. I cannot find this message in any manuals, or on the Canon website. I've logged the question in with Canon, but it could take up to 3 days to get a response.
Any ideas anyone? Many thanks.

After about 7 hours on the phone with Canon, Apple, friends, etc. I rang the man I bought the printer from. He said 'no problem' and within 20 mins, he emailed me the link below - this is after Canon told me there was no updated driver as the printer was so old! Lunatics! Anyway, if anyone needs a great company for large format printers, etc ring Design Supply.
http://software.canon-europe.com/products/0010256.asp

HT2250 Installing printer to time capsule with bonjour: failure message 1802

"When installing printer to time capsule with bonjour the fault message 1802 pops up:
"You have insufficient access to your computer to make connection with selected printer

We have no replies.... now what do we do?

I could not print using Canon MF8300C Series with Yosemite 10.10.1

After download and installing, I am not able to print using MF8300C Series. Help anyone?

So assuming that you have downloaded and installed the Canon MF Driver v10.3.0, have you been able to add the printer in Printers & Scanners? And if yes, does this printer go through the motions as if it is going to print that then fails?

Wifi network printing using Canon Pixma MP600R

Hi, we've just bought the MP600R printer to use as a wifi network printer for three macs. An emac, an ibook and a macbook. All the computers are running different versions of the Mac OS from 10.3 through to Leopard (housekeeping!)
Anyway we've read all the troubles with Leopard so are prepared for the problems but the other probem we've encountered is that the first computer connected perfectly well (it has a 10 x 4 operating system) but since then none of the others will communicate with the printer.
Is this something to do with registering mac address with the printer? Has anyone set up more than one mac attached to the MP600R before? Any suggestions gratefully received. Life is too short to be this puzzled. best Livia

Hello Livia,
I have an MP600R that is being connected to wirelessly via 10.4, 10.5 and XP.
The first step with the configuration is choosing the wireless network the MP600R will connect to. The second step is setting the ip address; either static - which means you enter the numbers, or dynamic -which means the wireless router sets the address. Both of these functions have to be done when the printer is connected to the computers USB port.
Once the printer is connected to the wireless network, then on the Mac's you use the More Printers > Canon IJ Network setting to find the printer and print to it. When you browse the printer will be displayed with its MAC address in brackets.
For those that are not able to connect to the printer, you may find that they are using different ip address to the Tiger Mac and MP600R. Check your network settings on all machines to ensure they are using the same address subnet (typically the first three sets of numbers in the address).
If the addresses are on the same subnet, then there may be something wrong with the driver software. When you go to add the printer, do you see the MP600R after selecting More Printers > Canon IJ Network?
PaHu

How to print to Canon irC5051 with Print Server?

[edit] I am using 10.7.5 not 10.6.8 sorry [\edit]
My company recently upgraded to Canon Image Runner C5051 units.
They added print servers with authentication for follow me printing (print at any machine around the building by authenticating).
I have read tons of discussions, forums and google articles on how to get image runners to print with os x - yet to no avail.
I have downloaded both the recent drivers from canon (the PS and URII) updates.
I can only seem to connect to the printer using the "Windows" domain feature in the add printer settings.
The Windows URL is \\printARL\ARLC-Secure.
I can ping the \\printARL and retrieve the IP address. But I cannot do the same with the full path (\\printARL\ARLC-Secure)
Trying to LDP print to the printARL ip does not work. I have no way of figuring out the full path ip address of the print server.
On my windows computer it shows "null" in the port/ip address on the PORTs tab.
So with URII I cannot identify the LDP ip address to use so if I connect via the windows domain it keeps returning error -50.
I guess this makes sense because its not LDP.
Using the windows search to connect and applying the Canon 5051 PS driver it seems to function.
It connects, allows to me authenticate, moves the file to the print server, and shows up at the printer.
But when I print, it does nothing. No output. ...sometimes it even makes the sound like it is printing, but then no dice.
If I try and Generic PS or PCL driver, it sends the document.
But when I print, it seems to produce a paper format error (thinks it LGL)
So if you force the printer to print to LTR, it spits out reems of giberish.
There must be something I am missing.

Sorry for missing your post. I don't check the 10.6 forums too often.
Reading your post it sounds like your are using uniFLOW, which is the follow-me printing app. So if you want to continue using this with the Mac there are a few things to note.
1. The Mac UFR2 driver wants to communicate directly with the copier. With print jobs being routed via the Windows print server (uniFLOW secure input queue) there is no chance of there being two-way communication and this often causes the -50 error you mention.
The solution is to use the Canon PPD, but this would require the ADV C50xx to have the optional Postscript kit. And given the gibberish output you mention it would seem that this kit was not purchased. So I would be talking to the Canon rep. If they had scoped your business correctly and saw the Mac/s then the PS kit should have been ordered.
2. You cannot ping the printer queue on the Windows server. So pinging \\printARL\ARLC-Secure won't work as you have found. But you can ping the Windows server, which you did and this worked. And, your issue is not due to an inability to connect to the Windows queue. It is a driver issue.
3. Using the PS driver appears to work. Lets you authentice but does not print. This is due to the lack of the Postscript kit in the copier.
4. Re the Generic PS, no PS kit means no printing. And the same goes for PCL.
So, in summary. The UFR2 driver is not designed to print via a Windows server. For your setup, the Postscript kit in the copier would solve your issue.

Cannot print to Canon MF4140 with latest 2.21 driver

After I add a printer (I choose Canon MF4100 Series UFRII LT (UK) driver) when I try to print I get UFRII driver error -50.

It is unusual that you are getting this error with a direct USB connection. You could try another USB cable. You also need to ensure you select the correct queue, as the machine can show the Fax queue in the Add Printer view.
One last suggestion, when you do add the printer via USB, the Mac sometimes incorrectly shows it has selected the UFR2 driver. With this selected you will get an error when you print. So when you add, make sure you change the Print Using menu to 'Select printer software' and then search for the MF4140 in the printer model list. With this MF4140 selected open Options & Supplies and select the Utility tab and then click Utility. This will open the UFR2 Printmonitor app and it should connect to the MF4140 without error. If it does, close the Printmonitor and then try printing.
Hope this helps.

TA22258 Very slow printer spooling canon mx420 with os 10.8, how to imrpove buffer speed?

How to improve a very slow print spooler using canon printer mx420 with os 10.8.4
It takes about 60+ seconds spooling hanging quite a bit at 56%.
thanks, Gaston

How to improve a very slow print spooler using canon printer mx420 with os 10.8.4
It takes about 60+ seconds spooling hanging quite a bit at 56%.
thanks, Gaston

How can I print using only black with the Lexmark Z810?

Mac OS X 10.6.8
Print Using 810 Series driver
Printer Driver Version: 10.6.4
I want to print using only the black cartridge. I'm out of color ink. However, I see no option to print using black only. Consequently, when I print a document, only the parts of it that are black with show up on the paper. Anything that has another color will not appear on the page. Is there a solution to this problem?

Print Options can be hard to find and sometimes seem to change locations depending on OSX version or printer model. Here is where it is on the print dialog on my mini with HP printer.

TERRIBLE LOOKING PRINTS USING CANON iP6700D & iPHOTO '08--HELP!!

I just bought a brand new iMac and am attempting to print pictures from iPhoto on my Canon iP6700D. The prints look HORRIBLE. Very grainy, low res, amateurish. When I use the Canon's direct print option (you can print directly from a smartdisk using the printer's LCD screen) the quality is AMAZING. So, I'm leaning toward a configuration issue with the iMac.
I did try printing from Preview to make sure it wasn't an issue withiPhoto, but had the same issues.
Does anyone have ideas on how I can solve this?
Thanks!

Just to get you bye (until the issue with iPhoto is sorted out), Cannon has a Mac specific printing utility for your printer - EasyPhotoPrint. It should work great until iPhoto is working good for you.
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDeta ilTabAct&fcategoryid=257&modelid=13363
Go for the drivers and software section, you'll see it in there.
Sasparilla

Cannot print using Canon senses LBP 6000 and Lion

apparently no drivers for Canon LBP 6000, but the printer is only 15 months old. Everything appears to work, data transfers, tells me it is printing the document, but it isn't!

If you use an earlier version of the CAPT driver on Lion, then you will get a similar result to what you mention.
So I suggest you download the CAPT v3.40 driver and run the installer. At the point where it shows Easy Install, change this drop menu to Uninstall, so that the older version of CAPT is removed. When this has completed, run the installation again, obviously selecting Easy Install this time. When it has completed, ensure you add the printer as per the instruction in the document "Registering OS X Lion.pdf" that is included with the download.

Firefox 3.6.9 / Windows 7 will not print using font specified with @font-face - any workarounds?

I've seen a few mentions of this problem around the interwebs, but can't find a resolution. I used [http://www.fontsquirrel.com/fontface/generator fontsquirrel's font-face generator] to prepare different versions of a font for cross-browser display. Screen presentation in almost all browsers is fine, and almost all browsers print the embedded font as well - except for Firefox/PC (3.6.9/Windows 7).
I have tried inline styles, styles inside of the head, and external stylesheets, all with and without media type print. What can I do?

Hi John,
Can u try the work around mentioned in the below link
http://notsomany.wordpress.com/2010/03/30/jinitiator-working-on-windows-7/
Also some times IE8 can block the webutil_file_transfer.
AS_to_Client if "protected mode" is ON for the security zone your forms url is in (look in the statusbar in IE ->
internet, trusted site, ... -> protected mode: On/Off)
Regards
Fabian

Using Canon XSi with RAW & Lightroom 1.4.1

I have CS2 and Lightroom 1.4.1: how can I use RAW 4.4.1 with a Canon XSi?
It is clear that CS2 cant be used with this. Less certain whether I can use Lightroom 4.4.1?
It would appear that I could use Photoshop Elements 6.0 to do this?
Is there a convenient way to use more than one Camera Raw with CS3 without having 2 or more different versions of CS3 on my desktop, each with its own version of Camera Raw?
Same question as above but can one use more than one Camera Raw with Photoshop Elements 6.0 or greater?
Thanks,
Hersch

Jao,
Thanks for this insight on Lightroom 1.4.1. In principle this should solve my problem.
Thanks very much.
Hersch
PS: I think we might have had an earlier discussion on soft-proofing. I would add that without having done a comparative series of tests, I found the Huey Pro a useful tool for calibrating my LCD monitors. It is significantly discounted.

Trouble printing to Canon printers with the PRISMAsync controller.

I've recently upgraded from InDesign CS6 to CC. I haven't had any issues with CS6 when printing to either of my printers. InDesign CC, however, is throwing all kinds of media and size errors on my PRISMAsync controllers! Below is a screen capture of what the print driver says when I go into the printing preferences:
On the controller side, it either says multiple media, or invalid media. Changing the media size in the driver sets the print size within InDesign to "Defined by Driver" and the size to the smallest the controller can see (which is something like 6x4). If I override the settings within InDesign, I get the errors again. However, if I set the driver to a preset page size twice in a row, the InDesign print window shows the correct size under "Defined by Driver" and the file seems to print. This is fine only if I'm using a standard page size, but I cannot print to custom sizes on either machine using the PRISMAsync controller!
Anybody else have this issue, or perhaps a fix or workaround?
I'm using InDesign CC 2014 on Windows 7 x64. The driver version for the C7010VPS is 3.1.0.0. I've already tried reinstalling the print drivers and resetting all my print settings.

We would normally recommend that you export PDF/X-4 from InDesign and print the resultant PDF file to your printer from Acrobat!
- Dov

Printer Settings dialog missing when printing to another Mac with Bonjour

I want Photoshop to manage my color settings rather than my Epson 4800 or Epson SPRX 580 printers, so in the print dialog box I select the "Printer Color Management" tab and set color adjustments to the OFF position. This works fine as long as the printer is connected directly to my MacBook or my MacBook Pro. But if I try to send a job on my MacBook Pro via bonjour to either of the printers when it is connected to my MacBook, the print dialog is missing the choices of "Printer Color Management", "Printer Settings", etc.
All that is available are things like "Layout, Cover Page, Scheduler, Summary." The "Printer Settings, Color Management" options only show up on either computer when connected directly to the printer.
Is there a way to get those other choices (Printer Settings, Color Management) when printing over a bonjour network?
I'm on Mac OS 10.5.6 on the MacBook Pro and Mac OS 10.4.10 on the MacBook. I have downloaded all the driver updates from Epson and deleted and added the printers again with the same result.

HP must have release a driver update because we no longer encounter the problem.

Non printing using canon i80 with bonjour on an xp machine

Similar Messages

Maybe you are looking for