Non proportionate ownership for an investment entity and impact on NCI

How have other people handled the following in HFM?
An investment entity is owned 25% by two group entities (24% by one and 1% by the other) and the other 75% is external and owned by 3rd party investors. The entity is a partnership and the 1% owner is the GP who is not charged any fees. We maintain capital accounts outside our GL which show the true capital account for each investor. In HFM we reflect the ownership but this means the GP earns 1% of all income and expenses in the investment entity when it should only earn 1% of income. as a result we get out of alignment between the NCI and the capital account statements.
We use special percentages in a data form to handle the equity of the company (which reflects the contributed capital by each investor) but I am not sure how to handle the expenses. If we start applying special percentages to the expenses the NCI expense would be correct but wouldn't the NCI on the balance sheet be incorrect as that is calculated using the equity of the company and not the expenses?
Or do you solve it by making adjustments in HFM to correct the NCI balances?

Similar Messages

Difference in ABST2 in non leading ledger for 2nd LC AA and 2nd LC GL

Hi,
While executing ABST2 there is difference in our non leading ledger ,we have recently created new dep. area 33 which updates the values in 2nd LC AA for non leading ledger but value in 2nd LC GL is different from what we have in Asset for non leading ledger Z1 .
When we check in FAGLL03 for Z1 ledger we came to know that Asset balance is updated from Local currency and GL values are updated from 2nd Local currency ,but in 2nd Local currency system has not post any entry and due to this there is difference.
We want the same value in non leading ledger Z1 for 2nd LC AA and 2nd LC GL.
Please let me know if there is any specefic settings required for the same.
We have mantain dep area 34 also as per SAP Note 1433535 but still there is difference in ABST2.
Thanks
Akshata

Hello Akshata,
If you want to setup a scenario in Fixed Asset Accounting, where
you post different valuations (local GAAP / IFRS) to a different ledger
group in G/L for parallel valuation, then you have to use (in total) 3
depreciation areas in the following way. For each additional "valuation"
for which you have additional ledgers defined in G/L, and for which you
want to get different values as those posted in area 01, you need also
two additional depreciation areas (1 real and and 1 derived area) in
asset accounting.
Please consider a correct definition of a parallel ledger scenario
is as follow: this is an example only
                           Posting to G/L         Ledger
Area 01 HGB                        1                   0L    > STATUTORY
Area XX IAS                          3                   LG    > (IAS)
Area YY (IAS - HGB)             5 or 6              LG    > (IAS)
Acquisition/transf/retirement postings in area 01 go to all ledgers
independently of your setting in OADB. And, if any difference occurs
between area 01 an area XX this is posted trough the derived area YY
(posting indicator 6).
This is the parallel ledger scenario logic and how the techinal
solution to this requirement was developped.
You can find more documentation about the so-called "Ledger Scenario" in
Asset Accounting for the purpose of parallel valuation in the SAP Help
Portal. You may find these links helpful:
a) Parallel Accounting in Asset Accounting
http://help.sap.com/erp2005_ehp_04/helpdata/EN/91/09f5400e517e7fe1000000
0a1550b0/content.htm
b) Parallel Valuation
http://help.sap.com/saphelp_erp60_sp/helpdata/en/4f/71ea61448011d189f000
00e81ddfac/content.htm
c) Making Settings for Parallel Ledgers in FI-AA
     > this one documents my above explanation
http://help.sap.com/erp2005_ehp_04/helpdata/EN/0d/de3d83c78b48a28a44ad92
14239d57/content.htm
d) Example: Parallel Accounting and the Derived Depreciation Area
     > this one describes how the derived area acts in the scenario
http://help.sap.com/erp2005_ehp_04/helpdata/EN/37/ebad814b3347e9bc5182c0
56d5bbd8/content.htm
kind regards
Ray

Excisable and Non Excisable plants for the same customer and same material

Hi All,
We have a customer who purchases the SAME goods from two different plants, one plant is Excisable and another plant is Non Excisable. So sales area of the customer is same for both the plants. When customer buys from Excisable plant Excise Duties should applicable and when the same customer buys from Non Excisable plant Excise Duties should not be applicable. If I maintain the Excise indicator as 1 in customer's J1ID then Excise Duties are applicable for the customer from wherever he buys the goods.(If he buys the goods from Excisable and Non Excisable plants Excise Duties are flowing).
So, my query is: if the customer buys from non-Excisable plant, Excise Duties should not flow.
So I am planning to create a new sales org for Non Excisable plant, then the sales area of the customer will change.
Is there any other way to over come this issue? Plz guide me.
Thanx&Regards,
RAMU

Dear Ramu
My suggestion is creating a new sales organization is not required just to fulfill this excise requirement.
Let us assume you have two plants
- 1000 is excisable and
- 2000 is non excisable
for material ABC
Now go to J1ID, select the tab "Material and Chapter ID combination" and maintain the excise tax indicator for plant 1000 only.
By doing so, while creating sale order, you input the delivering plant and based on the settings you maintained in J1ID, excise duty will be determined in that sale order.
thanks
G. Lakshmipathi

Can I override the default ReadObjectQuery for an entity and specify my own call

Hi,
I am trying to override the default ReadObjectQuery and the ReadAllQuery for an entity and supply my own call.The entities have to be read from the database using a StoredProcedure.I tried doing something like
Descriptor desc=evt.getSession().getDescriptor(Configuration.class);
desc.getQueryManager().setReadObjectQuery(new ReadObjectQuery());
StoredProcedureCall call = new StoredProcedureCall();
call.setProcedureName("CONFIGSVC");
call.addUnamedArgument("CATEGORY");
call.addUnamedArgument("CFGKEY");
call.addUnamedArgument("VALUE");
desc.getQueryManager().getReadObjectQuery().setCall(call1);
desc.getQueryManager().getReadObjectQuery().addArgument("CATEGORY");
desc.getQueryManager().getReadObjectQuery().addArgument("CFGKEY");
desc.getQueryManager().getReadObjectQuery().addArgument("VALUE");
When I try to execute the query
ExpressionBuilder builder = new ExpressionBuilder();
Expression expr = (builder.getField("category").equal("GOESVC.GETTDEV")).and(
new ExpressionBuilder().getField("configKey").equal("GOESVC.REQ")).and(
new ExpressionBuilder().getField("value").equal("$ENV.$ORIGIN.GOESVC.REQ"));
ReadObjectQuery query = new ReadObjectQuery(Configuration.class, expr);
session.executeQuery(query);
I can see in the log that it completely ignores the call I set and tries to execute using the default call and that too with incorrect mappings between the "entity" field names and the actual database field names.
2002.11.01 08:50:52.640--ClientSession(8218801)--Thread[main,5,main]--#executeQuery(ReadObjectQuery(com.fmrco.gett.toplink.Configuration))
2002.11.01 08:50:52.750--ServerSession(7721862)--Thread[main,5,main]--Connection(5230193)--SELECT CFGKEY, CATEGORY, VALUE FROM CONFIG_ETT WHERE (((category = 'GOESVC.GETTDEV') AND (configKey = 'GOESVC.REQ')) AND (value = '$ENV.$ORIGIN.GOESVC.REQ'))
2002.11.01 08:50:53.375--ClientSession(8218801)--Thread[main,5,main]--EXCEPTION [TOPLINK-4002] (TopLink - 9.0.3 with StoredProcedureCall patch [email protected] 28/10/2002 (Build 423)): oracle.toplink.exceptions.DatabaseException
EXCEPTION DESCRIPTION: java.sql.SQLException: [SQL0206] Column CONFIGKEY not in specified tables.
INTERNAL EXCEPTION: java.sql.SQLException: [SQL0206] Column CONFIGKEY not in specified tables.
How to I solve this issue?
Thanks,
Harini

Hi,
The "ReadObjectQuery" in a descriptor's query manager can only be used to change the primary key read query. It will be used only for a ReadObjectQuery that either has a selection key, selection object, or an expression that exactly matches the primary key.
If you have a non-primary key query that you want to use, you can add it as a named query to the descriptor's query manager.
I'm not sure of the primary key of your descriptor, assuming that it is a 3 part composite key, then your ReadObjectQuery procedure is defined correctly in the descriptor. However the ReadObjectQuery is incorrect, you must use "get" not "getField", also you must use a single expression builder.
i.e.
ExpressionBuilder builder = new ExpressionBuilder();
Expression expr = (builder.get("category").equal("GOESVC.GETTDEV")).and(
builder get("configKey").equal("GOESVC.REQ")).and(
builder.get("value").equal("$ENV.$ORIGIN.GOESVC.REQ"));
ReadObjectQuery query = new ReadObjectQuery(Configuration.class, expr);
session.executeQuery(query);
you could also do,
Vector key = new Vector(3);
key.add("GOESVC.GETTDEV");
key.add("GOESVC.REQ");
key.add("$ENV.$ORIGIN.GOESVC.REQ");
ReadObjectQuery query = new ReadObjectQuery(Configuration.class);
query.setSelectionKey(key);
session.executeQuery(query);
If the descriptor primary key is not 3 part, then add this query as a named query.
Descriptor desc=evt.getSession().getDescriptor(Configuration.class);
ReadObjectQuery query = new ReadObjectQuery();
StoredProcedureCall call = new StoredProcedureCall();
call.setProcedureName("CONFIGSVC");
call.addUnamedArgument("CATEGORY");
call.addUnamedArgument("CFGKEY");
call.addUnamedArgument("VALUE");
query.setCall(call);
query.addArgument("CATEGORY");
query.addArgument("CFGKEY");
query.addArgument("VALUE");
desc.getQueryManager().addQuery("findConfigSVC", query);
To execute the query,
Vector arguments = new Vector(3);
arguments.add("GOESVC.GETTDEV");
arguments.add("GOESVC.REQ");
arguments.add("$ENV.$ORIGIN.GOESVC.REQ");
session.executeQuery(Configuration.class, "findConfigSVC", arguments);

HT2534 When I try to set up an Apple ID, it's asking for a credit card, and there is no "None" option, like this page suggests. How can I bypass this? This iPad is for a younger child who has no credit card, and will not need to make any purchases.

When I try to set up an Apple ID, it's asking for a credit card, and there is no "None" option, like this page suggests. How can I bypass this? This iPad is for a younger child who has no credit card, and will not need to make any purchases.

You can create an iTune and App Store account without credit card details
1. Sign out of current Apple ID if you are sign-in to one (important)
2. Go to App Store and select a free app
3. Tap INSTALL APP
4. Create New Apple ID
5. Confirm Your Country
6. Agree with Terms and Conditions
7. Fill in your Apple ID and Password (you must create a new Apple ID; don't use your old Apple ID)
8. Create and answer your secret question
9. Select NONE for Payment Method
10. Fill in Billing Address
11. Submit application for new Apple ID
12. Wait for verification email
13. When email arrive, verify your account
14. Start downloading your free apps

How can build help file for right to left and non english language

hi erverybody, i have a big problem ,please help me
i creat a c# appliction with vs.net2005 and i want to write
help file for it .i need a software to creat help file for non
english language(such as persian or arabic) and right to left
support . i tried many helpware chm builder tools but each of them
made a problem .i dont know what to do .what is the best solution
for creating help files for right to left and non english languages
how can i build my help file with f1 helping ability .thank u
so much
Text

Hi Mr_Sia and welcome to the RH community.
You could try looking at the HAT Matrix. This is a comparison
of all the help tools around. Click
here to go to it.
RoboHelp itself, whilst it does support over 35 different languages
does not support Persian or Arabic.

Can 5 axis image stabilization be engaged with non system lenses for A7II and A7rII?

Many people use/will use their excellent non system manual focus non system macro lenses on the A7II and undoubtedly on the soon to be released A7RII. Stabilization in the X/Y planes is very very important for macro. Sony on the A7II only stablizes the X/Y planes for lenses that report the focus distance as best I can tell. Perhaps the lens compensation app or another can be modified so this data can be manually inputted or even change the firmware to allow this and thus stabilize all 5 axes. Focal length will need to be inputted of course as well. Perhaps there is another way around this that I have missed. Thanks for any comments.

Thank you for taking the time to answer. I have done more digging in reviews and recalled sony's announcments which implied on 3 axis IS is available w/o a lens that reports focsing distance. Not my favorite source, but review from PCMag: "If you're using a non-native lens, or even a native manual focus lens like the Zeiss Loxia 2/50, it's stabilized along three axes—yaw, pitch, and roll. There's a technical reason for that. In order to compensate along the x and y axes, the camera needs to know the distance to the subject, which requires electronic communication of the focal distance from the lens to the body. To compensate for the other three axes, the only data that needs to be transmitted is the focal length of the lens. Even if you're using a purely mechanical Leica lensit can be stabilized—you're able to manually enter the focal length via a menu. The only real downside to this is that the A7 II does not add that focal length to the recorded EXIF data, so if you like to track which lens a shot is captured with, you'll need to take notes." http://www.pcmag.com/article2/0,2817,2475439,00.asp A friend informed me that on his A7II he must mount a non OSS Sony lens first to have any image stabilization with any of his totally manual lenses--seems the camera saves the settings of the last lens attached. Turning the cam off doesn't reset this--very odd---seems to be a bug in the firmware. I hope the A7rII is different. This whole issue is quite confusing. Appreciate any additonal clarification.

HT2534 Tried to set up my Apple ID and the none button option for Billing is not showing up, what can I do?

Tried to set up my Apple ID and the none button option for Billing is not showing up, what can I do?

Try this support page provided by Apple...
http://support.apple.com/kb/ht2534

Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.

Dear Technet,
Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.
My cluster suddenly went disappear. and tried to restart the cluster service. When trying to restart service this above mention error comes up.
even i tried to remove the cluster through power-shell still couldn't happen because of cluster service not running.
Help me please.. thank you.
Regards
Shamil

Hi,
Could you confirm which account when you start the cluster service? The Cluster service is a service that requires a domain user account.
The server cluster Setup program changes the local security policy for this account by granting a set of user rights to the account. Additionally, this account is made a member
of the local Administrators group.
If one or more of these user rights are missing, the Cluster service may stop immediately during startup or later, depending on when the Cluster service requires the particular
user right.
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

AppStore asking for Credit Card information and I don't see "None" option to continue without providing credit/debit card details

Hi,
AppStore and iTunes on my MacBook Pro (OS X - 10.8.5) are asking for Credit Card information and I don't see "None" option to continue without providing credit/debit card details
I tried changing country etc. but stll I can not proceed without credit card. Please help..........!! Thanks in advance.
Regards,
Akshay

The post here by "TehYoyo" helped:
https://discussions.apple.com/thread/4725517
I had to create new apple ID as mentioned there and then the stupid "None" option showed up. Don't understand why this though!
Cheers,
Akshay

I own CS5 and want to upgrade to CS6 but don't want to pay a monthly fee for the Cloud. Is it possible to purchase a non-Cloud upgrade? If so, where and how much?

I own CS5 and want to upgrade to CS6 but don't want to pay a monthly fee for the Cloud. Is it possible to purchase a non-Cloud upgrade? If so, where and how much?

Creative Suite 6
Mylenium

Intigrating SAP and Non-SAP system for recruitment process

Hi All,
Our Client has a requirement which is related to Recruitment.The requirement is that the employee resumes ,photos and credentils are stored in legacy system.The shortlisted resumes sud be transferred into SAP and the hiring process sud be done in SAP.After the hiring process , the status of the applicants sud be triggered in the legacy system and not in the SAP system.
Is there any Standard BAPI's for this requirement. Any Workflow is involved in this requirement.
As a HR Abaper i need to give the complete technical details for this requirement. Pls advice me on this .This is very urjent.
Points will be awarded.
Many Thanks,
Chakradhar Maddina

what is this 3rd party application?
if anyways they are using SAP for masterdata, why dont they use the same for applicant data?
ok for whatever the reason they have decided that..only way looks like is to do it manually,
create a bdc/lsmw for the hiring process and let them use it regularly for hiring all the selected applicants in a single go.
as for updating their system with the updated status, again i think they should do it manually.or maybe if their legacy system allows mass data update/chages.
becoz you do the creation of BDC/LSMW only once not everytime you want to hire.. i think its an easir process. also wait for other experts to give their feed back you may get some valuable info.
hope it helps

Proportionate Accounting for Joint Venture

Can anybody share with me how to do proportionate accounting for Joint Venture in HFM? We're using HFM9.3.

Follwing are the steps for doing performing custom defined consolidation :
1) define the method of consolidation in Consol Method in the application metadata
2) write the method specific consolidation rules in rules file.
3) in the ownership managment, set the entity as active, choose the method, define the ownership %
4) when you run the consolidation, you will get the desired result.

MB5B Report for Date Wise Stock and Value

Hi,
I am Taking MB5B Report for Date Wise Stock and Value.
But I have one doubt all stocks is coming or not in these report like Unrestrected Stock,Return Stock.Blocked stock,Transist stock,Restrected Stock,qty Inspection Stock.
I have another Doubt in these report three Stock type indicaters are there like these.
1.Storage Location / Batch Stock
2.valuated Stock
3.Special Stock.
But i have one doubt what is defferent these
1.Storage Location / Batch Stock
2.valuated Stock

Hi Prasad,
Yes MB5B report consider the Unrestricted, Quality, Blocked, Transit stock and restricted stock. Not sure about Return Stock.
If you select the Storage location/Batch stock radio button then the system will display all the possible stock from the storage location and the corresponding batch also.
If you select Valuated stock radio button then system will show only the valuated stock not the Non-valuated stock. Because Non-valuated material type is available in SAP system will not show those stock suppose if you select the Valuated stock radio button.
Regards
Karthick

SSO for MS outlook, OWA and Sharepoint using SSO 2.0

Hi,
We have installed the secure login server 2.0. And configured SSO for SAP (ABAP, JAVA) systems using X.509 certificate. it is working fine.
We want to configure SSO for some non SAP applications like MS outlook, Outlook Web Access, Sharepoint.
I dont see any documentation in the implememntation guide of NW SSO 2.0 for how to configure these non sap applications to accept X.509 certificates.
Anyone please share the details of how to configure SSO for MS outlook, OWA and Sharepoint
Regards,
Yogesh Kumar D

Hello Yogesh,
Secure Login Server generates short lived certificates, this means after a configured time (or even
after an logout, because the Secure Login Client does not persist the private
keys in the file system) the private key and certificate is gone.
So using this for long term encryption is not practicable (because decryption
will be very very hard after a certificate/key renew...)
For a signature only solution the problem would be the signature validation, because it needs the
public key/certificate from the signer. This is usually included into the
PKCS#7 signature format, but its not guaranteed (depends on the application settings as example in outlook etc.). So this would be theoretically possible, but unlikely.
For long term encryption/signatures you need persistence certifkate/keys.
So thats the reason there is not documentation about that use case in Secure Login Server.
best regards
Alex

Non proportionate ownership for an investment entity and impact on NCI

Similar Messages

Maybe you are looking for