Non reactive screen

Hello,
I wish somemone could help me because i bought my iphone a month ago and it is quite expensive. Moreover I don't want to send it back to apple because it is going to be too long and i don't want to wait a month.
My problem is that the screen is almost completely blocked. I mean that sometimes the screen reacts but i have to touch like 20 times the application to open it and it doesn't work all the time. In addition to that, every icon on the screen is framed by a grey square when i touch it.
I really need help because i can't even turn it off. Thanks a lot for your help.
Respectfully.
Louis.

What have you tried to do so far?
Have you tried to restore it? Reason I ask, the icons should not look like that. Since software drives the images of the icons it sounds like software issue and thus if that is bad, could be why issues with the screen.
Not sure about France, but sending phone in for work usually takes 48-72 hours and when they send you a box to send it back to the, they can include a temp phone to use while they work on yours.
(just saw the other post after I posted this, wasn't aware of that feature).
Message was edited by: DaVBMan

Similar Messages

What is the diffrence between an OEM screen and a Non-Oem screen?

i wanted to buy a new screen for my ipod because my brother cracked it. so i was wondering wat was the difrence between an OEM and a non-OEM screen? like is there a diffrence on the pixels?

babowa wrote:
Really.
I believe the OP was concerned about some fly-by-night outfit who makes a ten cent piece of replacement screen and markets it as "compatible with xxxx". The lack of quality and reduction in resolution/pixels could be expected there vs. an OEM screen where one expects the same quality as the original equipment had.
Yeah, that's a given. The point is, OEM can be used two different ways. One way is to say the parts are Apple branded. Toshiba might make the part following specifications supplied by Apple, and then the part gets a label that says Apple. In this case Apple is the OEM.
The other way is to say that the OEM is the company that makes the part for Apple. In this second case, the factory could make a run of parts for the 'aftermarket' and use the term "OEM" in their add copy and not be guilty of fraud.
However, just because a Chinese vendor says their parts are "OEM," does not make it so. In fact, I would think that only Foxconn and its suppliers could make that claim, and I seriously doubt Foxconn is dumping parts on eBay....
HINT: China is notorious for producing counterfeit goods.

HT3775 I NEED I TUNES FOR A 64 BIT PC. OPERATING SYSTEM IS WINDOWS 8, NON TOUCH SCREEN. WHICH IS THE ABSOLUTELY BEST WAY TO GET ITUNES OPERATING CORRECTLY ON MY PC????//I HAVE TRIED SEVERAL THINGS, NONE OF WHICH ARE WORKING. IS ITUNES DELIBERATELY EXCLUDI

I cannot get itunes to work/install on myPC. I am running windows 8 in a 64 bit machine. I also want to purchase books via itunes for my Nook. Are you deliberately excluding PC owners so we cannot use ituens on our computers???? I have selected a community but have no idea what community I should be working with. Can somone explai these communities to me? Also. you don't allow much time to go thru the sign up process. I had to start over SEVERAL times as you kept timing me out. Jesus...when people are signing up for the first time, we have no idea of the questions that will be asked. Give us a break and give us time to sign up. Not everone is disability free and able to go thru your process quickly...you are NOT user friendly. You should be for people who are wanting to join your community. I used to want an Apple product but now that I have had first hand experience with your web page, I think I will probably stay away from Apple products. VERY DISAPPOINTING

Jan 11, 2014 10:26 AM Re: I NEED I TUNES FOR A 64 BIT PC. OPERATING SYSTEM IS WINDOWS 8, NON TOUCH SCREEN. WHICH IS THE ABSOLUTELY BEST WAY TO GET ITUNES OPERATING CORRECTLY ON MY PC????//I HAVE TRIED SEVERAL THINGS, NONE OF WHICH ARE WORKING. IS ITUNES DELIBERATELY EXCLUDING
Re: I NEED I TUNES FOR A 64 BIT PC. OPERATING SYSTEM IS WINDOWS 8, NON TOUCH SCREEN. WHICH IS THE ABSOLUTELY BEST WAY TO GET ITUNES OPERATING CORRECTLY ON MY PC????//I HAVE TRIED SEVERAL THINGS, NONE OF WHICH ARE WORKING. IS ITUNES DELIBERATELY EXCLUDING PC'S in response to Birdlover1
Post over in the iTunes for Windows forum, here:
https://discussions.apple.com/community/itunes/itunes_for_windows
sebastian

Glossy vs. Non-Glossy Screen - How can you tell?

Hi,
If someone came to you on the street with a MacBook Pro, how can you tell if he/she had a glossy or non-glossy screen? Is there something in System Preferences or something that tells you directly? Or do you have to tell by just looking?
Thanks.

Only way is by looking. Just look at the dislay at an angle, and if you see a reflection it's glossy.

How to switch from glossy to non-glossy screen (2010 model)

I will only have access to an Apple Store or AASP in the next week. In the mean time, I'm wondering if there's any reason to this:
I had a 2007 Macbook Pro 15" on Apple Care, which was close to expiring. The computer wasn't functioning properly, so I took it to an Apple Store and they tried to repair it. A few days later, I go back there and I get the news that my Macbook Pro won't even turn on anymore, so they give me the new 2010 Macbook Pro 15" as a free replacement. My old one had a matte (non-glossy) screen, but they informed me they didn't have any ones with matte screen to give to me at the time. Since I needed the computer on that day, I had to take one with a glossy screen home.
That happened on May. Now, I'm finally able to have access to an Apple Store, so I wonder how I can get my Macbook Pro to have a matte screen. I believe I have the right to have a matte screen, but it has been to long.

Hi Roberto,
This question can only be answered by Apple. This is a user-to-user forum and the question you're asking is related to the policies and procedures for unit replacements handled by Apple. Typically, from my experience, when Apple offers a unit replacement the one you get is... the one you get. If the matte screen was that critical, then you should have asked to have it ordered and waited.
Perhaps Apple can exchange your replacement computer (after 3 months), but again that question can only be answered by Apple.

Replacement non touch screen for Pavillion TS 15-B103AU

He, we have a HP Pavillion TS 15-B103AU with a cracked screen. IS there a DIY replacement screen I can get to replace it? I"m an IT professional myself so am confident doing the work, also I'd prefer a non touchscreen as we never really used the functionality anyway and I know a non touch screen would be a lot cheaper

Hi,
Please check part # on the second manual of the following link:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&lc=en&dlc=en&document=&product=5358508
The manual also shows you how to replace screen (page #60).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can a touch screen be replaced with a non-touch screen? Still struggling to Find the answer

Can a touch screen be replaced with a non-touch screen? Still struggling to Find the answer.
My son has a 3 month old laptop with a touchscreen. Unfortunately he cracked the screen. The actual picture is fine, but the screen cover is cracked. After much searching we found the replacement cost…..all in is some $500. I am trying to find out if the screen can be replaced with a non touch screen. This will save him $250. I cannot seem to get the answer from HP, despite having been a client for many years.
He ordered the HP Pavilion dv6t Select Edition customizable Notebook PC. The product number is XC102AV.
It also shows a product number ww146av . The connector is on the bottom left of the screen.
I am pretty sure that the part number, per the manual, is 631019-001
I had been getting helpful replies from “Erico”, but have not heard back on this issue.
http://h10032.www1.hp.com/ctg/Manual/c02657339.pdf
Thanks

Hi,
I am still waiting for an answer as well. I haven't forgotten you. Since it is just after the holiday period perhaps an answer will come reasonably soon.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Replacing non-touch screen on C560 ideacentre with a touch screen? Is it possible?

I have a C560 Ideacentre non-touch screen all-in-one desktop. The screen is busted on it, and I am curious if I can install a touch screen in it instead of the non-touch screen it currently has in it. I know they make the C560's with touch screens also, so I would think it is possible, but I'm not sure. Also, I can't find a part number for the touch screen to order it.Any advice on this would be great. My machine type is listed as 10150

Not sure if this helps, but my serial number is: cs02200327

HT204032 Does the non-Retina screen MacBook Pro have the ability to initiate Power Nap?

I've seen that the Retina screen MacBook Pros can use Power Nap from Apple's WWDC keynote but can the non-Retina screen MacBook Pros do that too? It has the same processor and close to the same RAM. Or is it because the Retina screen MacBook Pros have flash storage that they can do Power Nap? Thanks

From http://www.apple.com/osx/specs/ this is what is officially supported:

Plastic Non-sticky Screen protector.

I'm not sure if this is the right place to post this but I used to have a case that came with a thick sheet of bendable plastic that I could slide in and out with the case as a screen protector. I have since ordered the same case "Griffin Elan form Case with EasyDock for iPhone 3G, 3G S (Black)" and it no longer comes with the removable/slide able non-sticky screen protector. It came with a regular peel off and install screen.
Does anyone know where I can get my old screen protector? Please! I've been searching everywhere!

Mine doesn't feel sticky, of course it's been on for a year and a half or so.
I can suggest giving it a few days or so, see if you can get used to it.

Other Non SAP Screens

Hi,
Can we view other Non SAP Screens from SAP.If So,how,
I know that we can integrate the DATA from Non SAP to SAP thru XI/PI
Correct Inputs are rewarded
Regards
Rasheed

Hi,
Yes we should view the Non sap screens in the SAP.
This may be helpful to you
http://help.sap.com/saphelp_nw04/helpdata/en/26/91b8fc431931449f04a1f1ec228021/frameset.htm

My safari window is disappearing in non full screen mode OSX Lion

Hi Guys,
I seem to have the following problem. not sure exactly how it started as my wife was using the mac at the time (she says she just dragged the safari to different desktop via mission control) but now the situation is as follows:
When I hit safari icon it switches on (I can see the little light dot underneath the icon and after right click I can see names of windows that are opened) however I can only see the Safari menu at the top but no window. If I scroll to the right or left to different desktops it's not there, the same goes if I double tap to see the Mission Control mode it's not there...
I so far figured out that once the Safari menu is visible on top of the screen I can go to View>Enter Full Screen and then Safari will come back into the full screen mode but once I unclick the full screen button in right top corner the whole window just swoops into the right top corner and it's nowhere to be found again.
I have rebooted and it's still the same - I can only get the full screen mode or none. it's very weird. Anyone's got any suggestions?

Thank you,
That's not it - Hot corners are not active, it's more like when you normally click the full screen on/off button (the two arrows facing each other) the transition happens with gray apple background and it moves either to or from full screen but here the background comes on and the window just goes into the corner and it's gone. Then when in Safari menu I go View>Enter Full Screen the window comes back exactly the same way: from top right corner into the whole screen.
Like I can only use Safai in Full Screen mode..

Scuff on MacBook Pro (Late 2006) non-glare screen

My otherwise pristine MacBook Pro (Late 2006 model, 2.33GhZ C2D) has developed a 1/4-inch scuff right in the middle of the screen. Small, but highly distracting, particularly when the area beneath it is white.
Can anyone recommend a product to minimize or buff it out? I've seen this stuff, but it's more for cleaning than removing scratches and scuffs:
http://www.klearscreen.com/searchresult.aspx?CategoryID=3
I've also seen iPod scratch removers, but they seem to buff plastic out to a glossy finish, whereas this is a non-glare surface ... sigh.
Thanks for any help!

Late 2006? You do not say what graphic card.
I would imagine you are long past any recall.
http://support.apple.com/kb/ts2377
Ask about a out of warranty flat- rate repair, if that is your intention.
http://nwsinglespeed.hubpages.com/hub/Do-You-Know-About-Apples-Flat-Rate-Repair- Pricing
Genius reservation http://www.apple.com/retail/geniusbar/
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

Escape button doesn't work in iTunes, iWork, Preview switching back to non-full screen mode

Though it does in Safari, iPhoto. Is it possible somehow by means of AppleScript, Terminal (or smth else) to enable esc button to switch between full and non-full mode assigning it to all of my apps or is it a bug?
ILYA

But I want use just one button instead of combination of them. Isn't it possible to make esc button the general screen mode switching tool?

Non-sap screen look and feel in webdynpro abap

Dear Experts,
I have a Webdynpro ABAP application which is fetching data from LFA1 and LFB1.
My client wants a non-sap look and feel onto the screen, he doesnt want the SAP Color and all.
How can i achieve this to look it commercial ??
Please suggest.
Regards,
Mamai.

Hi Mamai,
WDA,maintain two parameters WDFORCEEXTERNALSTYLESHEET = 'X' and WDTHEMEROOT = 'CustomerThemes".
for ur application , add the parameter sap-ep-themeroot=/SAP/PUBLIC/BC/UR/NW5/THEMES/MYCUSTOMTHEME to ur application URL , where MYCUSTOMTHEME is the theme u have created under the path /SAP/PUBLIC/BC/UR/NW5/THEMES/ in ur system.
Please go through this..
http://help.sap.com/saphelp_nw70/helpdata/en/7b/fb57412df8091de10000000a155106/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/46/89af7fbe4d429ee10000000a1553f7/content.htm
and for custome theme..
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7015b1f9-535c-2910-c8b7-e681fe75aaf8?quicklink=index&overridelayout=true
Re: Custome theme or stylesheet for one WD Application
stylesheets..
http://help.sap.com/SAPhelp_nw73/helpdata/en/47/af752005c92fe1e10000000a42189d/content.htm
Cheers,
Kris.
Edited by: kissnas on Apr 21, 2011 6:44 AM

Non reactive screen

Similar Messages

Maybe you are looking for