Non receipt of purchase emails

I am no longer receiving email receipts for purchases made via iTunes or within down loaded apps. Please advise what the problem could be as I am being billed and cannot trace the purchases

daverobinson wrote:
We are a cancer charity and we operate an email list service for our members. This is provided by COMMUNITY.LSOFT.COM. We have about 200 subscribers to this service, of which about 30 use BTINTERNET. For the last few weeks messages from this service are being rejected by BTINTERNET.COM, with an error code 5.4.7 554 5.4.7 . We don't understand what these numbers mean, but we do know that other members of our organisation who use other email providers do not encounter this problem, so this is essentially a problem with BTINTERNET.COM. The list service interprets these codes as meaning “too many messages”, and when the list service has received more than 10 rejections, the subscriber is deleted from the list service. We have reinstated some of our subscribers, but they usually get deleted again. Individual messages from other sources to btinternet subscribers are not rejected.
Dave,
I suggest you raise your problem as a separate thread.
The failure 5.4.7 554 5.4.7 means that COMMUNITY.LSOFT.COM. has tried several times to send your message but it has been rejected so many times that it has given up.
A possible solution is to ask your subscribers to put you on their safe senders list.
If possible you need to find out what is causing the initial rejection of the message.
I shall not respond unless you raise as a separate thread.

Similar Messages

Non-receipt of an email.

Everytime I log on to my email account a single large (7-8MB) email being received is blocked or stopped. All other arriving emails arrive without problem. How can I identify the sender of the email and either be able to receive it and read it or cancel it?

Increase the server timeout setting.

Non receipt of BTinternet (and Talk21) emails - u...

We’re having major issues with emails to BTinternet (and Talk21). It appears BT have changed their filters in some way and none of our customers with the above email addresses can receive our business emails.
This is resulting in loss of service we provide for our client. Since 23/3 we have had 100 customer complaints so far notifying us of non receipt of the emails.
We believe BT may need to make a change to whitelist our sending email prossible or is it you need some IP information to allow this through your servers.
Please can someone advise what and when this can be resolved?
Note this is not affecting any of the customers with NON BTInternet email addresses.
Thanks
Baz

daverobinson wrote:
We are a cancer charity and we operate an email list service for our members. This is provided by COMMUNITY.LSOFT.COM. We have about 200 subscribers to this service, of which about 30 use BTINTERNET. For the last few weeks messages from this service are being rejected by BTINTERNET.COM, with an error code 5.4.7 554 5.4.7 . We don't understand what these numbers mean, but we do know that other members of our organisation who use other email providers do not encounter this problem, so this is essentially a problem with BTINTERNET.COM. The list service interprets these codes as meaning “too many messages”, and when the list service has received more than 10 rejections, the subscriber is deleted from the list service. We have reinstated some of our subscribers, but they usually get deleted again. Individual messages from other sources to btinternet subscribers are not rejected.
Dave,
I suggest you raise your problem as a separate thread.
The failure 5.4.7 554 5.4.7 means that COMMUNITY.LSOFT.COM. has tried several times to send your message but it has been rejected so many times that it has given up.
A possible solution is to ask your subscribers to put you on their safe senders list.
If possible you need to find out what is causing the initial rejection of the message.
I shall not respond unless you raise as a separate thread.

ITunes is billing my account for my purchases, but I am no longer receiving a receipt in my email........does anyone know why ? Or how I can get this fixed ?

iTunes is billing my account for my purchases, but I am no longer receiving a receipt in my email, why is this ? And how do I get it fixed ?

Hello, here's the fix I think...
I think they're slowly nudging people to switch, .mac & MobileMe are going away about July, may as well set it up now.
I understand .mac mail will still come through.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
IMAP (Incoming Mail Server) information:
• Server name: imap.mail.me.com
• SSL Required: Yes
• Port: 993
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
SMTP (outgoing mail server) information:
• Server name: smtp.mail.me.com
• SSL Required: Yes
• Port: 587
• SMTP Authentication Required: Yes
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password

Non receipt of students redemption offer, returned cheque after 11 months.

I had purchased HP Envy M6 Notebook Sr.No. [Edited for Personal Information]With windows8 under student offer in July 2013 for my dughter & completed all the necessary farmalities and all documents alongwith cheque of difference for Rs.900/- were been sent to redemption cell at New Delhi.
In between I contacted & send the email to Mrs. Renuka Chaudhary & M/s Balgo P. Ltd. Nagpur, regarding non receipt of Inkjet Printer under student offer.
In first reply Mrs. Renuka Chaudhary asked me to send redemption no. In another communicaiton she reply that she has not got registration of the above product. Whenever the Redemption No. is generated after the registration of the product detailed online is made. After passing the 11 months I have received a letter without sign & date alongwith cheque of Rs.900/- mentioning the reason "Online Registration Not received" .
In this regard it shows the negligencies & deleberately created the problems with consumer while providing the redemption offer. Moreover the many complaints are lodged on complaint forum that many of students / consumers, are not receiving the product under redemption offer. That means the HP Company is cheating with consumers.
With due respect to hp redemption cell, I may please be granted a permission to lodge a complaint in Consumer Forum / Crime police (Financial).
... From... .. Deepak Dule
Dule_Deepak

No any solution has sent to me till now or nobody replied that they are enquirying why this is happening with consumers? It is a part & partial duty of HP & it is not of a part of customer to waste their time in chating with hp help forum. I think it is only a solution to go to "Consumer Forum"/Consumer Court for justice.
Dule_Deepak

Google blocks receipt of IPv6 email sent by OS X Server

If you are using both IPv4 and IPv6 internet connections and your email users are complaining about not receiving email, especially Google email, read on.
I use a Mac Mini running OS X Server to provide email addresses for officers in our civic association. Most of the mail was going through but more and more complaints were coming in claiming non-receipt of email. The mail was not in the recipients spam folder, either.
Postfix on the MacMini would send using either IPv4 or IPv6 connections when forwarding to the recipient email account. Sending SMTP mail on using either IPv4 or IPv6 to test sites works perfectly. Google, for some reason, has decided to refuse IPv6 connections that do not resolve with a rPTR record for sending IPv6 address. Getting a PTR record set for IPv6 isn't always possible and there isn't a good reason why Google needs to be this restrictive. If the email went to Google using the IPv4 route, messages would arrive in the destination mailboxes just fine since the Google rules on mail sent by IPv4 servers are less restrictive.
Two others have written how to overcome this situation on LINUX servers here http://tanguy.ortolo.eu/blog/article109/google-ipv6-smtp-restrictions and here http://christian.skala.me/blog/gmail-why-are-you-doing-this-to-me/#.VHDsUbnkHYs
These solutions work well on OS X Server's implementation of POSTFIX as long as you change the path names to the files. So if you run into this problem on your OS X Server here are steps to force all email sent to gmail.com to use IPv4 and mail to all other domains can use wither IPv4 or IPv6. This is the same process documented in the above links changed to work with the file paths used by POSTFIX in OS X Server
Edit /Library/Server/Mail/Config/postfix/transport using your favorite text editor (I use BBEdit) and add these lines:
Limit gmail.com to IPv4
gmail.com smtp-ipv4:
Edit /Library/Server/Mail/Config/postfix/master.cf and add these lines:
Limit gmail.com to IPv4
smtp-ipv4 unix - - - - - smtp -o inet_protocols=ipv4
Using terminal turn the transport file into a database POSTFIX can use:
sudo postmap /Library/Server/Mail/Config/postfix/transport
Edit /Library/Server/Mail/Config/postfix/main.cf and add these lines:
Limit gmail.com to IPv4
transport_maps = hash:/Library/Server/Mail/Config/postfix/transport
Use terminal to reload POSTFIX so the changes take place:
sudo postfix reload
You should now be able to send email messages consistently to people with [email protected] addresses and they will always use the IPv4 route while email to other domains will take either IPv4 or IPv6 routes, depending on what is optimally available at the time.

It is increasingly common for (receiving) mail servers to want to check the IP address of a sending mail server matches the authorised listed mail server for a domain, there are various different ways this is done and I don't know whether a simple DNS forward/reverse comparison is one of them. One I do know Google use is SPF (Sender Policy Framework). This uses the addition of a txt record in your domain to list which mail servers are authorised for sending emails for your domain. The SPF rule can be set to be a 'hard' fail which means an unauthorised server is always blocked, or a 'soft' fail in which case it merely increases the spam score making it more likely to be marked as spam. There are other schemes as I mentioned like domain-records/domain-eys and so on.
To check to see if your domain has one of these records try the following in Terminal.app
nslookup -query=txt domain.com
where domain.com is your domain name as used in your email address
Here is the relevant line resulting from checking google.com
google.com text = "v=spf1 include:_spf.google.com ip4:216.73.93.70/31 ip4:216.73.93.72/31 ~all"
The ~all entry means 'soft' fail a -all would mean 'hard' fail. The rest of that line defines a group of hostnames to allow, and two IP address ranges to allow.
For domain keys try
nslookup -query=txt mail._domainkey.domain.com
There are other schemes but those are the ones I have used. These are all aimed at trying to filter out fake aka. spam emails, a lot of spam uses fake from email addresses.
One could also argue that at this stage one should have a valid IPv4 address (and reverse PTR) for a mail server so as to allow other IPv4 only connected mail servers to reach you. IPv6 is still not widely adopted unfortunately. It is possible to have DNS records for both IPv4 (an A record) and IPv6 (and AAAA record) and similarly both types of reverse PTR. If your ISP is giving you true IPv6 connectivity and you are running a mail server then I would expect such an ISP to be able to define PTR records. You may need to speak to your ISP about this. The need for a valid reverse PTR is equally valid for both IPv4 and IPv6 and an ISP should be able to do both.

HT201272 What if my app was accidentally completely deleted, but I still have the receipt of purchase?

One of my apps was accidentally deleted by my two year old grandchild. It does not show upon the " purchased" columns, but I still have the purchase receipt in my email. How do I get it back?

Downloading past purchases from the App Store, iBookstore, and iTunes Store

Non Besy Buy Purchase Points Not Being Attached Properly !!

Here's the terms. ...
My Best Buy MasterCard (((non-Best Buy))) purchases:
Get 1 point for every $1 spent on qualifying dining and grocery purchases.
Get 1 point for every $2 spent on all other MasterCard purchases.
Since around fall of 2013, I've had to call a HOUND the phone lines just to get my non-Best Buy purchase points credited. ...
In the latest SAGA, thier response was 832 points for EIGHT months worth on non Best Buy purchases when I literaly ran THOUSANDS through the card in that time span. ... Say WHAT ? They are having me EMAIL pictures of my statements becuase evidenataly they can't download PDF files? In response, I converted PDF to JPG & put a picture of EACH month in a SEPARATE email & sent it back to them, but I've seen another fellow get his issue handled quite qucikly by using this forum. I have to wait weeks, or days just to get a half hearted email response.
Best Buy Social Media...can you help?
Solved!
Go to Solution.

Greetings Thomas_G, and welcome to the Best Buy forum,
Can we help? Well, that is a definite YES! You should not have to spend your valuable time calling into us just to make sure that your points for non-Best Buy MasterCard purchases are added to your My Best Buy™ account, and it is my goal that you will not have to call into us in the future regarding your non-Best Buy MasterCard points, as they should post automatically. Let me see what I can do to help.
After using the email address you registered with the forum to review your My Best Buy™ account, I can see exactly why your non-Best Buy MasterCard points have not been automatically posting. It looks like you had two accounts merged about this time last year and the merge was not processed correctly, which resulted in the link between your MasterCard and My Best Buy™ accounts to be broken. We are going to want to make sure they are properly linked so that future points for non-Best Buy MasterCard purchases post automatically.
I am very sorry for any inconvenience you have experienced so far, and I will be sending you a private message so that I can go over your My Best Buy™ account with you to see what I can do to further assist. We do not have the ability to view a member's MasterCard billing statements, so I will need to gather some additional information from you. To check your private messages, you will want to login to the forum and click on the little yellow envelope at the top of the page.
Thank you for taking the time to reach out to us and for being a My Best Buy™ member.
Derek|Social Media Specialist | Best Buy® Corporate
Private Message

Automatic creation of transfer orders from goods receipt of purchase order.

Hi experts
The project i am currently working on requires the following;
When goods receipting a purchase order i have a requirement for the system to create automatic transfer orders to put the stock away into storage bins. I am aware that the stock goes straight into the 902 area once goods receipted. Is it possible to have the transfer orders created automatically out of 902 once the goods receipt has been posted.
In support of this, i have made an entry in transaction OMKX for the following;
Reference Movement Type - 101
Movement Indicator - B (goods movement for purchase order)
Movement Type - 101
TR Create Transfer requirement - X
Immed. TO Creation - A
Addl Data - X
Once i receipt the PO it just sits in 902 and does not create any automatic transfer orders.
Could someone please help me
Thanks
Simon

Please try to process the material document of the GR manually by LT06 in foreground to find out the root cause of the error.
You may also want to setup the mail control (V_T321-MAILK) for immediate TO creation in OMKX. The system will send you a express message (depending on your setup) if TO creation is failed.

MIGO - Goods Receipt against Purchase order. PO rate dispaly.

Is it possible to display purchase order line item rate in MIGO - Goods Receipt against purchase order - Quantity tab.
In Quantity tab - System is showing Qty in Unit of Entry, Qty in SKU, Qty in Delivery Note, Quantity Ordered, alongwith these fields we also want display of Purchase order rate/each of that line item.
Please guide.

BTW you are getting PO number at MIGO and clicking over that you will get entire PO then why you want PO rate display here??

I have logged in to my itunes account on a different computer and none of my purchased music is showing up. I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where I sync everythi

I have logged in to my itunes account on a different computer and none of my purchased music is showing up. I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where I sync everything. I have authorized this new computer so I don't know what the problem is. I can't get on my old computer with my itunes account because the computer is broken. Not sure what to do

"I have logged in to my itunes account on a different computer and none of my purchased music is showing up."
Correct. it does not magially appear in other places. It will only be where you put it.
"I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where I sync everything. "
Correct as well. Iphone will sync with one computer at a time. Syncing to another will erase the current content.
You need to copy everything ( itunes library/contacts/pics/calendars/files/docs) from the old computer, or your backup copy of the old one, to the new one.

Non-Best Buy Purchases no longer getting points on MyBestBuy Mastercard

This to let who it may concern know, that I will probably be cancelling my BestBuy Mastercard soon. I have not recieved points for my account since 9/10/2013 on all of my Non-Best buy purchases. I have called the "Elite Customer Service Line" about 4 times since this started and every time they have apparently added in notes and I would be contacted and this probably would be fixed within 1-2 weeks. Well I called today again and was told the same thing. Which I am sure nothing will be done about yet again. So this is just to let you know that I am missing thousands of points and should not have to call multiple times to fix a merge issue because you guys wanted to update the name of your rewards program and weren't trained to merge accounts correctly. This is pretty sorry customer service for a 10 billion dollar company. The worst part is to fix this problem probably takes about 6 clicks of a mouse... Thanks Best Buy.

Good morning SlmShdy1,
If you have a My Best Buy™ MasterCard, then you should earn 1 point for every $2 spent on qualifying purchases made outside of Best Buy. Those point will generally post to a member's account the same time every month. Please feel free to send me a private message if you have made purchases outside of Best Buy using your MasterCard, but have not received points. A private message can be sent by clicking on the blue button located within my signature.
My Best Buy™ Program Terms
Warm Regards,
Derek|Social Media Specialist | Best Buy® Corporate
Private Message

Call BAPI_GOODSMVT_CREATE to create a goods receipt for purchase order

Hi,
I'm calling the bapi BAPI_GOODSMVT_CREATE to create a goods receipt for purchase order, but the following code doesn't work. It doesn't give me any kind of error message but it does nothing as well...
Can anyone help me please?
Thank You
Hugo
Code
DATA: wa_goodsmvt_header LIKE bapi2017_gm_head_01,
                        wa_goodsmvt_code    LIKE bapi2017_gm_code,
                        wa_bapi2017_gm_head TYPE bapi2017_gm_head_ret-mat_doc.
                  DATA: it_goodsmvt_item LIKE bapi2017_gm_item_create OCCURS 0 WITH HEADER LINE,
                        it_return        LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
                  wa_goodsmvt_header-pstng_date = SY-DATUM.
                  wa_goodsmvt_header-doc_date   = SY-DATUM.
                  wa_goodsmvt_header-ref_doc_no = '4500000020'.
                  wa_goodsmvt_code-gm_code = '01'.          "Goods receipt for purchase Order
                  it_goodsmvt_item-stge_loc = 'BPF2'.
                  it_goodsmvt_item-move_type = '101' .
                  it_goodsmvt_item-entry_qnt = 17.
                  it_goodsmvt_item-entry_uom = 'KG'.
                  it_goodsmvt_item-mvt_ind   = 'B'.
                  it_goodsmvt_item-po_number = '4500000020'.
                  it_goodsmvt_item-po_item   = '00010'.
                  it_goodsmvt_item-material = '50'.
                  APPEND it_goodsmvt_item.
                  CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
                    EXPORTING
                      goodsmvt_header = wa_goodsmvt_header
                      goodsmvt_code    = wa_goodsmvt_code
                    IMPORTING
                      materialdocument = wa_bapi2017_gm_head
                    TABLES
                      goodsmvt_item    = it_goodsmvt_item
                      return            = it_return.
                    data: begin of errmsg occurs 10.
                            include structure bapiret2.
                    data: end of errmsg.
                    data: wmenge like iseg-menge,
                          errflag.
                    clear errflag.
                    loop at errmsg.
                      if errmsg-type eq 'E'.
                        write:/'Error in function', errmsg-message.
                        errflag = 'X'.
                      else.
                        write:/ errmsg-message.
                      endif.
                    endloop.
                    if errflag is initial.
                      commit work and wait.
                      if sy-subrc ne 0.
                        write:/ 'Error in updating'.
                        exit.
                      else.
                        write:/ 'Ok'.
                      endif.
                    endif.
                    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
                    EXPORTING
                    wait = ' '.

Hi,
Thank you for the asnwer! I'm a rookie at ABAP so please forgive my stupid questions
I've changed the code to:
DATA: wa_goodsmvt_header LIKE bapi2017_gm_head_01,
                        wa_goodsmvt_code    LIKE bapi2017_gm_code,
                        wa_bapi2017_gm_head TYPE bapi2017_gm_head_ret-mat_doc.
                  DATA: it_goodsmvt_item LIKE bapi2017_gm_item_create OCCURS 0 WITH HEADER LINE,
                        it_return        LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
                  wa_goodsmvt_header-pstng_date = SY-DATUM.
                  wa_goodsmvt_header-doc_date   = SY-DATUM.
                  wa_goodsmvt_header-ref_doc_no = '4500000020'.
                  wa_goodsmvt_code-gm_code = '01'.          "Goods receipt for purchase Order
                  it_goodsmvt_item-plant     = 'BP01'.
                  it_goodsmvt_item-stge_loc = 'BPF2'.
                  it_goodsmvt_item-move_type = '101' .
                  it_goodsmvt_item-entry_qnt = 10.
                  it_goodsmvt_item-entry_uom = 'KG'.
                  it_goodsmvt_item-mvt_ind   = 'B'.
                  it_goodsmvt_item-po_number = '4500000020'.
                  it_goodsmvt_item-po_item   = '10'.
                  it_goodsmvt_item-material = '50'.
                  APPEND it_goodsmvt_item.
                  CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
                    EXPORTING
                      goodsmvt_header = wa_goodsmvt_header
                      goodsmvt_code    = wa_goodsmvt_code
                    IMPORTING
                      materialdocument = wa_bapi2017_gm_head
                    TABLES
                      goodsmvt_item    = it_goodsmvt_item
                      return            = it_return.
                      write:/ it_return-message.
And the return message is : Material document data and PO data do not match (Material)
Any idea of what might be the problem?
Thanks

Goods Receipts for Purchase Order using BAPI_GOODSMVT_CREAT

Hi experts,
I am working on the a program where am generating Goods Receipts for Purchase Order. the BAPI_GOODSMVT_CREAT returns an error saying "Material 6003022 not maintained in plant 1001"
Can any one assist? is there a field I may be missing?
Here is a sample code.
DATA: gm_header TYPE bapi2017_gm_head_01.
DATA: gm_code TYPE bapi2017_gm_code.
DATA: gm_headret TYPE bapi2017_gm_head_ret.
DATA: gm_item TYPE TABLE OF bapi2017_gm_item_create WITH HEADER LINE.
DATA: gm_return TYPE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: gm_retmtd TYPE bapi2017_gm_head_ret-mat_doc.
CLEAR: gm_return, gm_retmtd.
REFRESH gm_return.
Setup BAPI header
"data
gm_header-pstng_date = sy-datum.
gm_header-doc_date = sy-datum.
gm_code-gm_code = '02'.
" MB1A * Write 971 movement to table CLEAR GM_ITEM.
MOVE '101' TO gm_item-move_type .
" MOVE 'Q' TO GM_ITEM-SPEC_STOCK.
MOVE '6003022' TO gm_item-material.
MOVE '10' TO gm_item-entry_qnt.
MOVE 'EA' TO gm_item-entry_uom.
MOVE '1001' TO gm_item-plant.
MOVE '' TO gm_item-stge_loc.
MOVE '0901' TO gm_item-move_reas.
" MOVE '4500006877' TO GM_ITEM-WBS_ELEM.
" MOVE '0020' TO GM_ITEM-VAL_WBS_ELEM.
MOVE '0020' TO gm_item-deliv_numb.
MOVE '4500006881' TO gm_item-po_number.
MOVE '0010' TO gm_item-po_item.
APPEND gm_item.
Call goods movement BAPI
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
    goodsmvt_header = gm_header
    goodsmvt_code    = gm_code
IMPORTING
    goodsmvt_headret = gm_headret
    materialdocument = gm_retmtd
TABLES
    goodsmvt_item    = gm_item
    return           = gm_return.
IF NOT gm_retmtd IS INITIAL.
COMMIT WORK AND WAIT.
CALL FUNCTION 'DEQUEUE_ALL'.
ELSE.
COMMIT WORK AND WAIT.
CALL FUNCTION 'DEQUEUE_ALL'.
ENDIF.

>
Spark842 wrote:
> Hi experts,
> I am working on the a program where am generating Goods Receipts for Purchase Order. the BAPI_GOODSMVT_CREAT returns an error saying "Material 6003022 not maintained in plant 1001"
> Can any one assist? is there a field I may be missing?
>
> Here is a sample code.
>
> DATA: gm_header TYPE bapi2017_gm_head_01.
> DATA: gm_code TYPE bapi2017_gm_code.
> DATA: gm_headret TYPE bapi2017_gm_head_ret.
> DATA: gm_item TYPE TABLE OF bapi2017_gm_item_create WITH HEADER LINE.
> DATA: gm_return TYPE bapiret2 OCCURS 0 WITH HEADER LINE.
> DATA: gm_retmtd TYPE bapi2017_gm_head_ret-mat_doc.
> CLEAR: gm_return, gm_retmtd.
> REFRESH gm_return.
> * Setup BAPI header
> "data
> gm_header-pstng_date = sy-datum.
> gm_header-doc_date = sy-datum.
> gm_code-gm_code = '02'.
>
>
> " MB1A * Write 971 movement to table CLEAR GM_ITEM.
> MOVE '101' TO gm_item-move_type .
> " MOVE 'Q' TO GM_ITEM-SPEC_STOCK.
> MOVE '6003022' TO gm_item-material.
> MOVE '10' TO gm_item-entry_qnt.
> MOVE 'EA' TO gm_item-entry_uom.
> MOVE '1001' TO gm_item-plant.
> MOVE '' TO gm_item-stge_loc.
> MOVE '0901' TO gm_item-move_reas.
> " MOVE '4500006877' TO GM_ITEM-WBS_ELEM.
> " MOVE '0020' TO GM_ITEM-VAL_WBS_ELEM.
> MOVE '0020' TO gm_item-deliv_numb.
> MOVE '4500006881' TO gm_item-po_number.
> MOVE '0010' TO gm_item-po_item.
> APPEND gm_item.
>
> * Call goods movement BAPI
>
> CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
>   EXPORTING
>     goodsmvt_header = gm_header
>     goodsmvt_code    = gm_code
>   IMPORTING
>     goodsmvt_headret = gm_headret
>     materialdocument = gm_retmtd
>   TABLES
>     goodsmvt_item    = gm_item
>     return           = gm_return.
>
> IF NOT gm_retmtd IS INITIAL.
>
>   COMMIT WORK AND WAIT.
>   CALL FUNCTION 'DEQUEUE_ALL'.
> ELSE.
>   COMMIT WORK AND WAIT.
>
>   CALL FUNCTION 'DEQUEUE_ALL'.
> ENDIF.
My guess, is that this material is not really maintained in the Plant '1001', to be on the safer side, get the exact values from EKPO itself, also check if this material exists in the table MARC for the plant and storage location.
MOVE '1001' TO gm_item-plant.   "<< Hard coded
MOVE '' TO gm_item-stge_loc.
Replace the above hardcodes to something like this to get the actual value from EKPO.
select werks lgort into (gm_item-plant, gm_item-stge_loc) from ekpo
   where ebeln = gm_item-po_number
        and ebelp = gm_item-po_item.

Is it possible to do goods receipt for purchase order by mb31

Hello friends,
I have created one purchase order.Now i want to do goods receipt for that purchase order.I know that throught migo and movt type 101, i can do this.But guys i have one doubt over here.Can i do the goods receipt for purchase order by Transaction code MB31(Goods Receipt for Order).
When in Transaction code mb31 i put the purchase order number, system gave me the error,"order 44000000298 not found or not permitted for goods movement".Message no. c6001.
So guys what do you think in this matter?is it possible to do goods receipt for purchase order by mb31.If yes than how to resolve this error.
Thanking you guys in advance.

MB31 is for doing goods receipt of production order

Non receipt of purchase emails

Similar Messages

Maybe you are looking for