Non-Reloading Loader problem

In the first frame of that movieclip, I'm importing an external swf with Loader class,(Using actionscript2 but my main flash page using Actionscript3), It is loading well but when i pass to second frame and return to the first frame again, the Loader doesn't work. (i'm using addChild(); to show external swf)

The reason I am asking these questions is to try to get an understanding of how you have designed the file and what it is supposed to be doing, but you don't seem to be able to follow/answer what I am asking.
Here is a link to what I can only imagine from what you have described so far. It contains two files, the fla is the one that loads the swf, so look at that fla file and see how it differs from what you have created. It does what you are saying your file will not do.
http://www.nedwebs.com/Flash/smiley.zip

Similar Messages

Partial page load problem when using Muse in an existing non-Muse Masterpage; how to issue a jquery

Partial page load problem when using Muse in an existing non-Muse Masterpage; how to issue a jquery args.get_isPartialLoad().
My page is loaded into a palcehold within the Ajax update panel within the current Masterpage, so page loadload doesn't occur. But if my Muse page can capture the partial pageload then I can tell jquery to run the Muse formating routine.

Jackie, I am having the same issue and agree that it obscures our site analytics.
I only have the "WebMarketing" subscription - so I cannot see how often people visit my site (unless I just dont know how to view that). Here is a screen shot of how many different locations I have and how much it affects my site visitor count based on the other locations which seem "legit" because they have more page views than visits.
I hope there is a way to fix or block this.

App keeps loading problem solve

Anyone with an app still loading problem can get rid of it by going into the app store. tap on "updates"- bottem right corner. tap on purchased where you get a list of your downloads then tap on the cloud with the arrow, enter your pin. hit ok for app over 20mb. go back into the app store and to your purchased list and wait for it to reload. once done come out of the app store and hopefully all the loading apps are gone. hope it works for you.

I had this same problem when trying to download some training app. I could not delete or get it to upload completely either. Very frustrating. What I did was plug it into my computer, went to Itunes and searched the same app. I was able to download it here and then it starte to sync with my Iphone. You can remove the app after it finishes the download if u want. Hope this works!

After Effects CS6: Cache and Reload Footage Problem

After Effects CS6: Cache and Reload Footage Problem
I am having trouble getting my footage to update in an AE project.
In an existing project, there is an image sequence in a composition. I have saved and closed AE, modified the footage (same dimensions and qty. of frames, only the pixel data changes), and then re-launched AE and opened the project. Though I have changed the footage, the old content still appears.
To resolve this, I have done the following:
Edit>Purge>All Memory
Edit>Purge>Image Cache Memory
Edit>Preferences>Media & Disk Cache>Empty Disk Cache
Edit>Preferences>Media & Disk Cache>Clean Database & Cache
From the Project window I've selected all footage and selected Reload
None of these got the footage to update. I could double-click on the footage in the project bin and scrub the play head and the old footage was still displayed.
Finally I had to replace the footage with itself and that resolved the issue.
If this is operator error, lack of understanding the cache functions, or something else, I'd appreciate some assistance. I don't recall this behavior in CS 5.5, so I am guessing this is a change in CS 6.
Win 7 Pro 64bit Service Pack 1
Intel Xeon CPU X5450 @ 3.00 GHz 2.99 GHz
RAM 20 GB

about Illustrator and Photoshop files in CS6 especially - you should work with Ctrl/Cmd+E (Edit Original).
when in Ae and you want to change a source file, use this command on one of the layers
from the source file you wish to change (doesn't matter if its in the timeline or project window) and
your original software linked to that file will open.
when you work this way you make AE reload that file and any change after that will be seen back in AE immediately.
it is also very convenient way to work because there can be no confusion on which file you are on
if you work with multiple source files for example.
even if you made the change with your Photoshop/Illustrator opened file and got back to Ae
and didn't see any change - press on one of the layers Ctrl/Cmd+E and this will refresh it immediately.
This is the case in CS6.
in CC I have noticed that any change I make is refreshed immediately in Ae as if it rechecks the changes all the time,
and didn't even need to use Ctrl/Cmd+E but it's a good habit all the same.
didn't come across a case where that didn't work for be but
if all fails you could always change the folder location of the file, let Ae lose it, then replace footage of the file,
and thus let Ae re-link it back.

IMac, sudden extremely slow webpage loading problem

Hi guys,
I had this problem all of a sudden, not sure whether it was caused by malware, my own python scripts or the 10.8.2 update. However all the other devices in my wifi network work just fine. And also my iMac is not disconnected from the internet, ping "www.google.com" is fine, and other IM apps are working properly too.
I tried different browswers (chrome, firefox, safari) since then, and all the other suggested solutions (resetting DNS, using static ip address, clear cache and etc.) None of them actually solved the problem.
My friend told me to reinstall a clean OS X, which could be a huge pain for me.
However, I accidently found out some softlinks and permissions are messed up in my superuser directories. So I did a "repair disk permission" , now the browsers are back on the horse. That actually makes sense to me.
Long story short, verify/repair disk permissions (in Utilities/disk utility) might solve your browser page loading problem! I just wanna to share with you guys if you are struggling on the same issue as I was.
Regards,
candyquicksort

Thanks for the report & sharing!

Xlm loading problem

I have what I think is a loading problem but it might be
something else. I get the mp3 file listed in the xml to play but
none of the other info in the xml display. I have song titles &
band info that is not appearing. I didn't realize this at first
because if the mp3's had info already attached that was showing up
in my display. I now realize that that info was not coming from my
file.
I am a total newbie at this so any help appreciated .
(I think that I've added all potentially relevant
code)

I have what I think is a loading problem but it might be
something else. I get the mp3 file listed in the xml to play but
none of the other info in the xml display. I have song titles &
band info that is not appearing. I didn't realize this at first
because if the mp3's had info already attached that was showing up
in my display. I now realize that that info was not coming from my
file.
I am a total newbie at this so any help appreciated .
(I think that I've added all potentially relevant
code)

If I use Explorer, none of these problems exist. This suddenly happened overnight! I have your newest upgrade and I haven't had any problems for the past year or so....this is weird.

1. only in firefox - flashplayer won't upgrade, endless loop of "add plug-ins" etc.
2. vertical scroll bar flipped from left side to right.
3. crtl ++ to zoom doesn't function.
4. can't load any "personas" when in Google gmail.
If I use Explorer, none of these problems exist. This suddenly happened overnight! I have your newest upgrade and I haven't had any problems for the past year or so....this is weird.
== This happened ==
Every time Firefox opened
== Monday 6/14

Your above posted list of installed plugins doesn't show the Flash plugin for Firefox.
See [[Managing the Flash plugin]] and [[Installing the Flash plugin]]

Flat-File Loading problem

Hi Friends,
I am struggling with flat-file loading problem. I am trying to load a .csv file into data target. I took all pre-cautions while loading data. I look into preview and simulate the data. Everything is ok, but when i schedule the data, i found 0 records in the monitor. The following is the STATUS message of the above problem:
   No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
         Can anybody help me what is the problem and procdure to resolve it?
Regards,
Mahesh

Hi Eugene,
Thanks for the quick reply. The following screen-shot tells you the messages of detail tab;
OVER ALL STATUS MISSING WITH MESSAGES OR WARNINGS
REQUEST: MISSING MESSAGES
EXTRACTION
EVERYTHING IS OK
DATA REQUEST RECEIVED
NO DATA AVAILABLE DATA ELECTION ENDED.
PROCESSING
NO DATA
           The above message was shown in details tab. Pls guide me to locate the problem.
Regards,
Mahesh

Loader-Problem mit I.Explorer / FireFox ist OK

Die Domain "http://woopi.net"
enthält eine "site", die nur mit Flash generiert wurde.
Teste ich diese "Site" mit Firefox, dann gibt es keine Probleme, alles OK.
Teste ich mit dem Internet-Explorer, dann muß dieser erst lernen mit den LoaderKomponenten umzugehen,
nach dem 2. oder 3. "rollOver" werden dann diese Elemente richtig angezeigt.
Ziel-Beschreibung:
beim Aufruf von "woopi.net" wird auf dem Bildschirm die Bundesrepublik dargestellt.
Ein Klick auf die BRD öffnet ein Navigationsfeld mit 7 Button.
Der Klick auf den Button "Alle Banken in Deutschland" öffnet ein Navigationsfeld, in welchem bei einem RollOver
unten links auf dem Bildschirm ein Bild angezeigt wird, in einer LoaderKomponente.
Der InternetExplorer zeigt diese Bilder falsch an, erst nach dem 2., ev. nach dem 3. RollOver wird das Bild richtig angezeigt.
Unten rechts auf dem Bildschirm gibt es den Zugang zu einem weiteren Navigationsfeld, "WebKatalog 2".
Die Darstellung in diesem Navigationsfenster ist geradezu scheußlich.
Hinweis:
auch die Html-Seiten in denen die Flash-Seiten eingebettet sind, wurden mit Flash-Cs4 generiert.
Es wurden keine ProgrammErweiterungen verwendet.
Wer kennt die Problemlösung?
mfG, Jochen

danke für die Information:
"you have incomplete swf embedding code"
Die Kompelation der html-Datei erfolgt unter Flash automatisch, ich habe leider
"fast keine" html-Kenntnisse, kann also nur laborieren. Können Sie mir einen Hinweis geben ?
cue.fla     "wurde kompelliert". Ergebnis:
cue.swf
cue.html
Hier das, was ich vorfand:
<body bgcolor="#e7e7e7">

<a href="./cue/queue2.swf"></a>
<a href="./cue/queue3.swf"></a>
<a href="javascript: end("document.cue");"></a>
<a href="http://www.basiszins.de"></a>
<a href="http://www.onvista.de"></a>


<script language="JavaScript" type="text/javascript">
    AC_FL_RunContent(
Es müßte vielleicht so aussehen:
<body bgcolor="#e7e7e7">

<a href="./cue/queue1.swf"></a>     //das Script in cue.swf:   loadMovieNum("./cue/queue1.swf", 1);
<a href="./cue/queue2.swf"></a>    //d.Script in queue1.swf: on (release){loadMovieNum("./cue/queue2.swf",2);}
                                                    //d.Script in queue2.swf:   loadMovieNum("./cue/queue10.swf", 3);
<a href="./cue/queue3.swf"></a>    //d.Script in queue1.swf:   on (release){loadMovieNum("./cue/queue3.swf",2);}
                                                   //d.Script in queue3.swf:    loadMovieNum("./cue/queue30.swf", 3);
<a href="javascript: end("document.cue");"></a>
<a href="http://www.basiszins.de"></a>
<a href="http://www.onvista.de"></a>


<script language="JavaScript" type="text/javascript">
    AC_FL_RunContent(
Das "Loader-Problem" zeigt sich aber schon in der "queue1.swf" Datei, welche nach _level1 geladen wird.
Es wird hier nur Actionscript 2 eingesetzt. Bemerkenswert ist, daß sich Firefox ohne Probleme sehr stabil verhält.
Vielleicht können Sie hiermit etwas anfangen. Wenn ein SreenShoot eine bessere Analyse ermöglicht, schiebe ich ein Bild gerne nach.
mfG. Jochen

Help needed to install Flash Player : 'Non-Current Release' problem!

I been encountering problems while trying to install Flash Player on my laptop running Windows 7.
Originally Flash Player does not work as I understand it is not supported on 64-bit Internet Explorer.
After installing 32-bit IE, the following issue of 'non-latest version' arises and all installation were aborted by the application :
The below were steps I had taken to no success.
1. Via the 32-bit browser, downloaded flash player un-install program and did the uninstallation with success.
2. Rebooted the laptop.
3. Via the 32-bit browser, downloaded the flash player version 10.0.45.2 from http://get.adobe.com/flashplayer.
4. After downloading it automatically did the installation with 100% completion.
5. The program proceeded to activate the flash player with a webpage saying if the flash player is working properly, I should see a video and Flash Player's logo.
6. Before anything was displayed, an error message popped up to say I was trying to install a non-current version and that I should go to same webpage to download the latest version. The activation was then aborted.
Tried many times but always encountered same problem and hence cannot proceed to use the flash player.
Need assistance to diagnose the problem and to get Flash Player working on my laptop. Appreciate any help to get it working.
Regards.

Thanks to efforts of eidnolb and Bob, the installation of flash player into my laptop is now working .
Bob's installer enabled the download successfully.
Eidnolb's link in post 6 trigggered me that I may have previously installed the pre-release version 10.1, thereby leading to the 'non-current-version' problem too. Post in that link adviced to uninstall 10.1 using the pre-release uninstaller.
I suggest others who had encountered this non-current release to uninstall first using that specific uninstaller, before attempting to install the most current release. I may have installed the 10.1 pre-release in desperation after failing numerous times trying to figure out why flash player does not install in browser not knowing its currently-non-support of 64-bit browser.
Once again thanks for support, eidnolb and Bob.
Cheers.
Kelvin

XSD Loading problem

I got this error from bpel console .. Can any one please update on this.. Why this this error should occur?.
<messages><input><InvokePlanningOrderRoadshowProducerInputVariable><part name="PlanningOrderRequest" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><PlanningOrderRequest xmlns:ns0="http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder" xmlns="http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder">
<ns0:PlanningOrderHeader>
<ns0:OrderId>10215568</ns0:OrderId>
<ns0:BookingId/>
<ns0:OrderType>Standard</ns0:OrderType>
<ns0:CustomerName>MRS JUNE OCKWELL</ns0:CustomerName>
<ns0:ClientAccountId>EMP</ns0:ClientAccountId>
<ns0:ClientPreAdviceNumber/>
<ns0:Title/>
<ns0:ClientOrderNumber>W3221000-36</ns0:ClientOrderNumber>
<ns0:Latitude>53.526969</ns0:Latitude>
<ns0:Longitude>-2.657221</ns0:Longitude>
<ns0:Street/>
<ns0:HouseNumber>8 Bentinck Street</ns0:HouseNumber>
<ns0:Postcode>WN3 6RB</ns0:Postcode>
<ns0:Town>WIGAN</ns0:Town>
<ns0:Status/>
<ns0:PhoneCallRequired>Y</ns0:PhoneCallRequired>
<ns0:Phone1>01942202596</ns0:Phone1>
<ns0:Phone2>07584651731</ns0:Phone2>
<ns0:SlotPeriodStart/>
<ns0:SlotPeriodEnd/>
<ns0:SlotLength/>
<ns0:StopDuration/>
<ns0:PlanningOrderLines>
<ns0:PlanningOrderLine>
<ns0:OrderLineId>443405</ns0:OrderLineId>
<ns0:OrderId>10215568</ns0:OrderId>
<ns0:ItemNumber>EMP-TC750</ns0:ItemNumber>
<ns0:ItemDescription>RICHMOND KING BED</ns0:ItemDescription>
<ns0:NoOfPieces>03</ns0:NoOfPieces>
<ns0:ServiceString>01000</ns0:ServiceString>
<ns0:ShipsetId>01</ns0:ShipsetId>
<ns0:ClientUPI>009707300553D094</ns0:ClientUPI>
<ns0:OrderLineType>Delivery</ns0:OrderLineType>
<ns0:OrderLineNumber>01</ns0:OrderLineNumber>
<ns0:SpecialInstruction>IF NOT IN GO TO NUMBER 6 FOR KEY</ns0:SpecialInstruction>
<ns0:DeliveryVolume/>
<ns0:DeliveryWeight/>
<ns0:CollectionWeight/>
<ns0:CollectionVolume/>
<ns0:Status>LOADED</ns0:Status>
</ns0:PlanningOrderLine>
</ns0:PlanningOrderLines>
</ns0:PlanningOrderHeader>
</PlanningOrderRequest>
</part></InvokePlanningOrderRoadshowProducerInputVariable></input><fault><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>file:/SOA2M01/app/oracle/product/10.1.3/bpel/domains/operations/tmp/.bpel_PlanningOrder_1.0_06bcbd311b9a0d44d808edcbcee42770.tmp/PlanningOrderRoadShowProducer.wsdl [ Produce_Message_ptt::Produce_Message(PlanningOrderRequest) ] - WSIF JCA Execute of operation 'Produce_Message' failed due to: Could not instantiate InteractionSpec oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec due to: XSD Loading problem.
Unable to load Translation schemas from for http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder due to: XSD Location problem.
No XSD (XML Schema) found for target namespace http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder and input element PlanningOrderRequest
Please make sure the WSDL message points to a valid type.
Please make sure all used XML schemas are imported/included correctly.
; nested exception is:
ORABPEL-12537
XSD Loading problem.
Unable to load Translation schemas from for http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder due to: XSD Location problem.
No XSD (XML Schema) found for target namespace http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder and input element PlanningOrderRequest
Please make sure the WSDL message points to a valid type.
Please make sure all used XML schemas are imported/included correctly.
; nested exception is:
org.collaxa.thirdparty.apache.wsif.WSIFException: Could not instantiate InteractionSpec oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec due to: XSD Loading problem.
Unable to load Translation schemas from for http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder due to: XSD Location problem.
No XSD (XML Schema) found for target namespace http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder and input element PlanningOrderRequest
Please make sure the WSDL message points to a valid type.
Please make sure all used XML schemas are imported/included correctly.
; nested exception is:
ORABPEL-12537
XSD Loading problem.
Unable to load Translation schemas from for http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder due to: XSD Location problem.
No XSD (XML Schema) found for target namespace http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder and input element PlanningOrderRequest
Please make sure the WSDL message points to a valid type.
Please make sure all used XML schemas are imported/included correctly.
</summary>
</part><part name="detail"><detail>org.collaxa.thirdparty.apache.wsif.WSIFException: Could not instantiate InteractionSpec oracle.tip.adapter.jms.outbound.JmsProduceInteractionSpec due to: XSD Loading problem.
Unable to load Translation schemas from for http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder due to: XSD Location problem.
No XSD (XML Schema) found for target namespace http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder and input element PlanningOrderRequest
Please make sure the WSDL message points to a valid type.
Please make sure all used XML schemas are imported/included correctly.
; nested exception is:
ORABPEL-12537
XSD Loading problem.
Unable to load Translation schemas from for http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder due to: XSD Location problem.
No XSD (XML Schema) found for target namespace http://xmlns.hdnl.com/EnterpriseObject/Core/PlanningOrder and input element PlanningOrderRequest
Please make sure the WSDL message points to a valid type.
Please make sure all used XML schemas are imported/included correctly.
</detail>
</part></bindingFault></fault></messages>

You remove xmlns:ns0 attribute from PlanningOrderRequest and the prefix ns0: from xsd tags. When you declare xmlns:ns0 means it is looking for that ns0 namespace in the project directory or oracle server global directory.

PSE 12 trial version - loading problems

I have been trying for 3 days to load the 30 day trial of PSE12 on my new computer. My computer is loaded with Windows 8. I have encountered problems over and over again with loading PSE12, but never the same problem.
For example: after one download the start menu would open but it wouldn't go to the organizer or editor. So I deleted that program and re-loaded it BUT -
then , it went straight to the organizer - and froze, so I clicked out - tried to click back in, and NOTHING> >> not even the start menu.
THIS IS SOOO FRUSTRATING! Makes me really second guess whether I should purchase this or not
Please help!!!

I think it said error 101, but not totally sure that I recall it
correctly. I deleted everything and reinstalled and then it worked.
Haldis
In a message dated 12/31/2013 11:27:15 A.M. Pacific Standard Time,
[email protected] writes:
Re: PSE 12 trial version - loading problems
created by Jeff A Wright (http://forums.adobe.com/people/JeffAWright)
in Trial Download & Install - View the full discussion
(http://forums.adobe.com/message/5969733#5969733)

Adobe Captivate 8 projects published to HTML 5 shows major loading problems and stops

Adobe Captivate 8 projects published to HTML 5 cause major loading problems in most browsers(IE 11, Chrome v. 35.0, Firefox v. 31). Loading… (screen)
The view stops after a while and only the Loading… (icon) can be seen on the page.
Is this a known problem with Captivate projects published to html5 and is there a way to fix it? What is wrong?
Test the html5 version of this project at: http://kurs.dokker.no/captivate/
and see for yourself what happends.

I changed the Preferences/Project/Start and End Preloader % to 25 and published the projects again. The course: http://kurs.dokker.no/captivate/elev/
stopped like before on one of the first slides, loading… screen like before in IE11.
In Chrome v. 37.0 the course worked badly, would not run, sound missing and buttons not working.
In Firefox 31.0 the course worked to a degree even if the program was advising to use another browser for this content.
In Opera 23.0 sound was missing and else working as bad as IE.
All this testes is done on a PC using Windows 8 connected på internet via ethernet, download speed: 66.57.
I would like to use the HTML5-format since it has a cleaner view than swf-files that appear to be jagged, but there is a lot missing before Adobe Captivates html5 publish is where it needs to be. Her are the complete html5 course and here are the swf based course for comparison.

Flex 1.5 loader problem

Hi previous we wore having some loader problem. Now it is
cleared. but now our problem is,
In our home page, we are having one loader. In to that we
are loading our applicaions by clicking different links. It was
also fine. By clicking But1 we will get app1 in our loader. By
clicking But2 we will get app2 in our loader. Up to now OK. But
when i click the But1 again, we are able to load app1 but the
cursor is not stopping with its clock symbol. This is become a very
big problem for us. Can anybody know how to recover tis. I am
attacing my sample code.
<mx:GridItem horizontalAlign="center"
vScrollPolicy="off">
<mx:Loader id="mainpage_content_loader" width="700"
horizontalAlign="center" showBusyCursor="false" />
</mx:GridItem>
.as file:
function f1()
//getURL("../growthchart/userchart.mxml");
mainpage_content_loader.width="700";
mainpage_content_loader.height="2500";
mainpage_content_loader.contentPath = app1.mxml.swf";
function f2()
mainpage_content_loader.width="700";
mainpage_content_loader.height="500";
mainpage_content_loader.contentPath = "app2.mxml.swf";
function f3()
mainpage_content_loader.width="700";
mainpage_content_loader.height="500";
mainpage_content_loader.contentPath = "app3.mxml.swf";
Thanks

With the free developer's license, all swfs generated by Flex
will expire in 24 hours.
You can put the Flex server (developer's license) on the
network server. It is limited to the first 5 IP addresses that hit
the site until you restart the Flex server.
Tracy

Mail loading problem

Hi all
I've got this mail loading problem,
whenever the mail is loading I always scroll down to read the text first
but it always to back to the top, I scroll down again it scroll back up.
this happen only during the images are loading.
it is very annoying, though it might be fix in 10.5.7
but it was not.
any plan to solve this?

I have the same problem. Did you get any answers?

Non-Reloading Loader problem

Similar Messages

Maybe you are looking for