Non-rendered .DV files lagging playback in the viewer

I'm working with footage that was imported a bit ago through imovie. It seems the data rate on the audio or video is higher than if the footage had been imported through Final Cut. I believe I've worked with imovie captured footage in Final Cut before and have never experienced this issue. The files play choppy in the preview window like a crappy streaming internet clip but once brought into a timeline and the audio finishes rendering, everything is fine. Is there any setting in Final Cut I can tweak to get rid of the lag in the preview window? My boss has told me re-importing is not an option!
Any ideas?
Thanks,
ag

Convert all your footage to DV/NTSC with QT PRO before you import into FCP.
#20 Using iMovie to Capture for FCP edit
Shane's Stock Answer #20:
iMovie handles the media differently from FCP, specifically where audio is concerned. So it is not a recommended workflow. Here's why...
iMovie captures using DV Stream (.dv) standard which does not use timecode. That is a big disadvantage over the way that FCP captures in that you can't go back and recapture the material at a later date if you need to revisit a project.
The DV/NTSC specification (the one FCP uses) also calls for seperate tracks for audio and video, even if you capture it as one clip. iMovie' DV stream format is muxed audio and video, which means that they are tied together (I can't get into specifics because I ain't no engineer or programmer). FCP is a bit more demanding and captures the seperate audio/video tracks, either in a single media file or as seperate video and audio files. With FCP you could capture video only or audio only because each is defined by the DV specs. while with iMovie you can't.
Also, if you drop the iMovie footage into the timeline, your will get the RED render bar forcing you to render the footage in order to see it...
Shane

Similar Messages

None of my files will upload to the cloud even though I have not used any of the 5 GB storage.

None of my files will upload to the cloud even though I have not used any of the 5 GB storage. I checked the boxes, but nothing uploads. What am I doing wrong?

dmastern wrote:
OK. I thought my Mac contacts, documents, etc would be stored since I clicked on those boxes. Maybe I need to go back to Carbonite.
Carbonite, Dropbox, Sugar Sync, there are many options.

Why does playback on the timeline lag on my premiere elements 9 project?

Whenever I playback my edit on the timeline, it starts off playing fine, but after a few seconds it starts to lag. I am using a macbook pro (2.4GHz intel core 2 duo processor, OS X V10.9.4), and was initially editing off a WD hard drive connected with a Firewire800 cable. I have shifted all my rushes and the premiere elements project file from the hard drive to my laptop, but that doesn't seem to work. Project settings and Clip settings seem to match, otherwise I wouldn't be able to open the project file anyway. I fiddled with some of the playback settings, but nothing seemed to work. I need to rush out a piece of work asap. Any ideas?

AT Romano,
Please see my actions taken regarding your questions below:
One of my questions was attempting to determine if the total duration of clips on the Timeline has any effect on this random playback issue.
Am I correct in assuming that you are saying that this Timeline playback lag can be seen even with only one 1 minute clip on the Timeline? If not,
how many clips needed on that Timeline when the Timeline content playback starts to lag?
The lag can also be seen with only one 1 minute clip on the timeline.
If you start a new project with a different video source or just some jpg photos do you run into this Timeline content playback lag after rendering of that
Timeline content?
NO, this lag does not occur with a new project with different video source.
Did you understand what I wrote early on about Premiere Elements 9.0/9.0.1 being a 32 bit application when run on 32 or 64 bit computer? Do you use the computer for programs other than Premiere Elements? I asked since you wrote
Upgraded the RAM. I'm now running on 2x 8GB of RAM.
A 32 bit system is typically characterized by maximum supported installed RAM = 4 GB and typically 3.2 to 3.0 or less of that being available. So, why the upgrade to 16 GB of installed RAM?
I guess I didn't quite understand the 32 bit system thing. But i kinda get the idea now. In any case, my computer seems to be running faster than usual even though it didn't solve the elements 9 lagging issue.
Just recap time....
1. Optimize the computer with free ccleaner for Mac run through
CCleaner - Download
Done.
2. Make sure that there are no pile ups of preview files, conformed audio, and conformed video files. At this time, how much
free hard drive space at the location where the Scratch Disks are directed?
Done. About 870GB of free HD space. This is an external hard drive.
3. Set Playback Quality to highest instead of automatic
Did this, but the lagging becomes worse. It freezes longer on certain frames.
4. Make sure video card/graphics card driver is up to date according to web site of manufacturer of the card
According to Manufacturer, graphic cards installed on MacBook Pros are already optimised by Apple during the installation.
5. If dual monitor system, disconnect one, use only one
I am monitoring only from my laptop screen. No external monitors.
6. Delete the Adobe Premiere Elements Prefs file...
Users/Libraries/Application Support/Adobe/Premiere Elements/9.0
I cannot seem to find this file.
7. Export the lagging Timeline content to an appropriate file saved to the computer hard drive. Then determine if the playback of the export
exhibits any lags.
After export, there are no lags.
8. Do you run into the problem with and without the antivirus disabled?
I have no antivirus installed. But i did try turning on and off the firewall. With the firewall on, the lag seemed to get worse.
9. For troubleshooting purposes only at this time, download and install the free 30 day tryout of Premiere Elements 12
from Adobe....If it works for you, then we can target version 9....If it does not work for you, then we can target your computer.
There is no Premiere elements 12 available for trial download. Only premiere elements 13. Have downloaded that and copied the project file into elements 13. The lag is still there, but not as bad. But, it is still there.
- Gold Pirate.

Rendered html pages in results file(html) not showing the images of origina

hi,
rendered html pages in results file(html) not showing the images of original page
when i click on rendered html pages of different html section of a results file.
both master and tested as well.
thx
pasumarthi

By design, the report will not show the images, will not apply imported css or javascript files and will not show framesets. Also, in the case that an image is shown there is no guarantee that that was the image that was seen when recording/playback the script.
The rendered html pages that are shown in the report only contains the structure of the html page. If an image is shown the image will be a reference to the location of the image and not a saved copy of the image as part of the report. If the website has a simple structure this can give an idea of what was different. If the website relies extensively on images, stylesheets or javascript to present the information then this report feature becomes less useful.
Few weeks ago I requested a feature request in order to be able to see in the report the page exactly as it was when recording the script and exactly as it was when the script was played back. In the way that the feature request was written it specifies the use of screen captures or saving the page as a pdf file.
Regards,
Zuriel

My DVR security sofware that I access remotely uses a "dvr .ocx" file....when I try it in Firefox , either the latest non beta (3.6.1.5) or the new beta version (4.0 rc) it will NOT work as it says the plugin is missing... it works in IE 8,but not IE9...

My machine is Top of the range (my Company builds them so it had better be :) )
Amd 1100t , 8gb ram , Windows 7 64 bit etc, etc...
The is not a hardware problem , but a software problem with FF...Any help would be appreciated as I hate using IE 8 for anything at all :( but I have to keep it on my machines just to run my remote security cameras at my Computer shop ???
Original question...as question length is limited ...not very bright that limit by the way :(
"My DVR security sofware that I access remotely uses a "dvr .ocx" file....when I try it in Firefox , either the latest non beta (3.6.1.5) or the new beta version (4.0 rc) it will NOT work as it says the plugin is missing... it works in IE 8 (unfortunately) but not IE9...
As I own a Computer company I am fairly computer literate but cannot find a plugin that allows this to work in Firefox.... but I would have expected it to work in the new Firefox :(
All the best, Brett :)

The longer this thread continues, the more ancillary comments you throw in that aren't directly pertinent to your problem with your DVR software not working with Firefox 4.0. Sorry, I don't intend to continue with this discussion.
I do agree that ''something'' needs to be done better with regards to plugins for Firefox, but I do disagree with you as to whose responsibility that ''something'' is.

Just converted a PDF document to Word, none of the graphics from the PDF file show up in the Word document?

Just converted a PDF document to Word, none of the graphics from the PDF file show up in the Word document?
What do I need to do to bring the graphics and exhibits from the PDF file to the Word file?

Hi jackp52432917,
How was that PDF file created? Please see Will Adobe ExportPDF convert both text and form... | Adobe Community
It could be that the PDF file you're converting was created using a third-party application, and it doesn't contain all the information necessary to ensure a clean conversion. Have you had similar troubles converting other PDF files?
Best,
Sara

Safari 7.0.6, using Adobe Acrobat 11.0.10, aren't rendering pdf files in the Print Preview screen. Additionally, only a single, blank page prints for a multi-page pdf document. Any ideas?

Safari 7.0.6, using Adobe Acrobat 11.0.10, isn't rendering pdf files in the Print Preview screen. Additionally, only a single, blank page prints for a multi-page pdf document. Any ideas?

Figured it out. It had nothing to do with the software levels of Safari or Adobe Acrobat. Here's the fix:
Open Finder/Applications
Search "Internet Plug-Ins"
Move any Adobe plug-ins to the trash
Quit Safari
Launch Safari
Your pdf document should now render in Print Preview and print properly.

PDF file looks fine on the monitor, but paths bond in print in both PS and non-PS printers.

Hi,
I have a printing from Illustrator PDF problem. I've got Illy CS4 in which I have a rather huge file with a map and I'm tring to print pieces of the map. The PDF looks fine on the screen, but there are straigt lines on the print leading from one end to the other of two longest paths in the file.
The problem occurs when saving through Scripts to PDF, Scripts to Poscript in Illustrator CS4 (with all updates) and CS5.1. I also went to a friend who is using CS5 and a PDF made with it also had paths bonded. The problem doesn't occur when saving the file to a low version of Illy, opening it in Corel X4 and printing from a PDF made in Corel. Funny enough I also made a multipage A3+ print of an older version of the file and two of the lines showed up on the first artboard, none on the middle one and only one line in the third one (see the photo below).
Guys at the printers and more advanced Illustrator users I've asked for help said the've never seen anything like this and have no idea what the problem is. Accually, anyone I know hasn't got a clue of what the problem might be.
Scans of test prints:
PostScript printer: http://imageshack.us/photo/my-images/28/cs4postscriptprinter.jpg/
Office non PostScript printer: http://imageshack.us/photo/my-images/11/cs4officeprinter.jpg/
PDF made in Corel: http://imageshack.us/photo/my-images/404/illycs4tocoreltopdf.jpg/
PDF from CS5: http://imageshack.us/photo/my-images/254/illycs5.jpg/
Multipage PDF: http://imageshack.us/f/444/dscf0712wn.jpg/
Any ideas of what I can do to print this properly? I'm pretty far from being an Illustrator expert and I ran out of ideas for fixing this and would really appreciate help...

Hi Scott,
Thanks for your reply. Print screen of the image I'm supposed to be getting in print, that is my PDF: http://imageshack.us/f/692/printscreenu.jpg/
In the first jpg below are the only lines which are supposed to be printed (marked in red). The problem is that apart of what I'm supposed to be getting in print (print screen of the pdf above), I'm getting the lines I've marked in yellow in the second jpg below and which are not drawn in my .ai file neither in PDF. They show up in print only.
PrintScreen of the whole .ai file: http://imageshack.us/f/833/wholefilewithartboard.jpg/
PrintScreen of the whole .ai file with additional lines: http://imageshack.us/f/32/wholefilewithliens.jpg/

Where is the setting in LR 2.0 to turn on the view the embedded jpg file instead of rendering a thum

Where is the setting in LR 2.0 to turn on the view the embedded jpg file instead of rendering a thumbnail image from the RAW file?

Doug, this is a user to user forum so you get advice here from other users just like yourself.
AFAIK LR will show the embedded jpeg until it renders its own preview after that there is no way to get it to show the embedded jpeg.
When you are importing photos into LR in the import dialog box there is an option to show a preview of the embedded jpeg while the import is actually taking place.
Also this is the regular LR user to user forum and there is a link to the LR 2.0 Beta forum at the top of this forum. Maybe its best to post your question there.

Pe10: opening a previously saved and rendered project, the work area indicates non-rendered sections

Pe10: when I open a previously saved and rendered project, the work area indicates a majority of non-rendered sections.
When I open a previously saved and rendered project, the work area indicates non-rendered sections. My project is approximately 59 minutes and 27 seconds.
What must be done to have a saved and rendered project, when open again, be rendered?

TRUE_SEEKER wrote:
The price tag of $245 for the Prodad's Mercalli video software is too steep for me right now.
Corel's Avid VideoStudio Pro X4 Ultimate (what a mouthful) includes Mercalli SE. It was on sale at half-price on Amazon Black Friday and I missed it - mostly because I was trying to find out what the 'SE' part of it meant.
Annoyingly (very much so) it seems that Mercalli SE is pretty much the whole deal - a YouTube review of the Mercalli feature in VideoStudio by ProDAD (the Mercalli authors) included all the features I would expect to use.
So it seems that the $80 VideoStudio product includes the $150 Mercalli plug-in. Thus a workflow starting with Mercalli stabilisation in VideoStudio and then switching to PRE is viable. I can't really afford the full price VideoStudio product so I'm hoping for a similar 50% reduction after Christmas.
Cheers,
Neale
Insanity is hereditary, you get it from your children

I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data is not.) but

I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data does not.)

HI Dave,
I'm surprised you get no message when you attempt opening the Excel document in Numbers.
I'm assuming Numbers 3.1, since you are running Mavericks.
Does the Numbers file that opens show any content?
Does it contain a table?
How large?
Does it contain more than one tab (indicating more than one sheet)?
Do those other tabs contain a table?
Have you checked those tables for data content?
There have been cases in the past of imported documents opening with white text on a white background, giving the appearance of containing nothing. Check for this by selecting a block of cells, then applying a Fill colour or a Text colour using the Format button (paintbrush).
I'd also suggest attempting to open the Excel files using LibreOffice, which can be downloaded from the linked website.
Regards,
Barry

Can't seem to stream (RTMP) an FLV file in Flash Media Playback from the Amazon Cloud

I seem to be having trouble streaming any FLV file using RTMP from the Amazon Cloud. Other file formats (i.e., MP4, F4V) seem to work just fine.
I tried using your Flash Media Playback demo page and still had the same problem:
http://www.osmf.org/configurator/fmp/
Without publicly displaying the actual connection path here, this is what I am using for the Video Source (URL):
rtmp://xxxxxxxxxxxxxx.cloudfront.net/cfx/st/_definst_/MyVideo.flv
If I change the "MyVideo.flv" to "mp4:MyVideo.f4v", for example, then it works. But when I try to reference any FLV file that I have located on the Amazon Cloud then it just shows continuous buffering.
The FLV files that I am trying to use with both the Strobe and Flash Media Playback(s) all stream just fine when I connect to them via other Flash based applications/players that I have.
Do you have any suggestions?
Thank you very much.

Hello,
The link to the previous post does not seem to apply or help in this case. Please let me know if I am wrong.
I am merely trying to stream any FLV file using your Flash Media Playback demo page. What am I missing here?
Thanks again.

Is it legal to convert the music files, which I have purchased in recent months, to the mp3 format and burn them on to a CD so that they can be played in non-apple music devices that dont support the M4A format?

Is it legal to convert the music files, which I have purchased in recent months, to the mp3 format and burn them on to a CD so that they can be played in non-apple music devices that dont support the M4A format?

Yes, of course it is legal.
To convert the format, follow one of these documents:
iTunes 11 for Windows: Save a copy of a song in a new file format
iTunes 11 for Mac: Save a copy of a song in a new file format
Also note that you have the option of buying your files in MP3 format in the first place, from Amazon MP3 or other online retailers. MP3 files will work in iTunes as well as virtually every other player, program, and device.

I use imovie to create videos. When I burn the video to DVD and play it back there is digital breakup in the playback from the DVD It does not shoe in p[layback on the computer. I understand there isd some file I need to delete and reboot the imovie to co

I use imovie to create videos. When I burn the video to DVD and play it back there is digital breakup in the playback from the DVD. The digital breakup does not show in playback on the computer. I understand there is a file I need to delete and reboot the computer and imovie will rebuild the file in the program. Help!

My method is to use the DAW in standard recording mode, and set up the camcorder entirely separately. After recording, I automate the audio mix with fader moves and effects, then export ("bounce to disk") a full-fidelity AIFF, 16-bit 48 kHz stereo file (most videos use 48, not 44.1). I use iMovie '11 to import the video from the camera, then import the stereo audio file and match it up to the camera audio by dragging it into the iMovie Project. Make the waveforms visible, it's not too hard to align.
Then, use iMovie's "Export as Quicktime" feature. Here, by going through the menus and options, you can control the audio compression (for example, 256k instead of 128, although 128 seems to be enough for YouTube).
AppleMan1958 posted a YouTube video about controlling iMovie's export options that may help:
http://www.youtube.com/watch?feature=player_embedded&v=vJg-909lx2s#!

I have a MacBook Pro (purchased in 2011) with OS X Lion 10.7.4. I'm using Microsoft Office 2011 and cannot open older PowerPoint Files (non .pptx). It will always open the same .pptx file and then the machine hangs up and just keeps spinning.

I have a MacBook Pro (purchased in 2011) with OS X Lion 10.7.4. I'm using Microsoft Office 2011 and cannot open older PowerPoint Files (non .pptx). It will always open the same .pptx file and then the machine hangs up and just keeps spinning.

Thank you - that all makes sense. It is, indeed, exactly what I did when I upgraded.
I'm also writing this on the machine that crashed a few minutes ago (I posted the crash in another thread). I got back with a 'safe boot' - as I have done a few times before.
I've also de-installed little snitch (and then done a safe-boot & then re-boot ) since that seemed involved. I de-installed Adobe flash, since that seemed to be a problem - I then re-installed the later, apparently fixed, flash. The most recent crashes don't seeme to have a problem with flash any more.
I've posted the various ( generally different ) crashes. I also posted a summary of the similar lines that turn up in most of the crashes.
Unfortuantely, I'm actually trying to use the machine to meet some urgent deadlines and all this is not making it at all easy.
I had had great hopes for 10.7.2 - I thought that the crashes must be pretty common, so would have a common aetiology. There do seem to have been some fundamental changes to the file sytem and to the video interface (that seems to cause problems to brand new iMacs as well as to my 2009 iMac).

Non-rendered .DV files lagging playback in the viewer

Similar Messages

Maybe you are looking for