Non-responsive keyboard and touch pad

I have a dv7-3065dx Entertainment Notebook. After the computer starts up and reaches the windows login screen, the keyboard and touch pad are non-responsive. The curser is blinking in the space to type the password, but I cannot type anything. Does anyone know what is wrong and how to fix it?

Hi,
Can you access Windows Recovery Console by tapping away at f8 as you start the notebook?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Keyboard and Touch-Pad Not Working After Having to Install New Hard Drive

I had to install a new hard drive in my HP Pavillion DV9700t that has Vista Home Premium 64-bit. After going through the recovery process with backup disk the built in keyboard and touch-pad do not work. During the installation, an error message came up saying something along the lines of "the drivers are not supported by this verison of windows because they are unsigned." The drivers that had that error were "hpqkbfiltr keyboard filter driver," "HP remote control HID Device," and "hpqkdfilter driver." I tried to update the drivers for the keyboard from the hp website, but the keyboard and touch-pad still do not work.
My question is, where do I find the digitally signed drivers for the keyboard and touch-pad that Vista won't flag and disable?
Help please!

Sparkles,
Thanks for the suggestions.
When dealing with MS Fix It, I was choosing run. Upon further investigation on that site, there really isn't a scan that applies to my issue anyways I tried the .NET Framework repair tool, and that seemed to work. It told me to try re-running what I was having issues with, so I tried running the Windows PowerShell again, but again was faced with the following message "windows update standalone installer encountered an error: 0xc8000247." I went back to the .NET screen and hit "Next" because it didn't work, and that responded by saying they were going to submit logs to Microsoft. I won't hold my breath on that one.
I'm to the point where I honestly don't care anymore. I have no idea what to do, because doing a clean install with the discs HP sent me isn't going to help because they are just recovery discs, and not an actual Windows disk. This is the second hard drive I have had to put into my laptop and use those recovery disks on in the last 3-years. The built-in keyboard hasn't worked during that time frame on either hard drive. I don't think the recovery disks I was sent install properly. Not sure where to go from here. I spent way too much money on this laptop years ago having it custom built to handle all of my drafting programs, so I don't want to just kick it to the curb. I was looking into the possibility of just replacing it, but I cannot stand the Windows 8 interface.
I guess I should have fixed the issue with the keyboard on this hard drive before loading all of my programs. Between the recovery disk install, formatting of the hard drive, and installing all of my programs it took well over 12 hours. Not really looking forward ot that again Then there's shockwave and flash and all of the other goodies that my recovery disks won't restore anyways.
Sorry if this seems like a negative post, but I'm just tired of trying to no avail. Maybe I should just take it somewhere to get it looked at, but I can't see them being successful if the recovery disks won't help anyways.
Thanks for you help,
MadBuch

My keyboard and touch pad just randomly stopped working, how do I fix it?

My keyboard and touch pad randomly stopped working and now I can't do anything, does anyone know how to fix this?

Try SMC and PRAM resets:
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379
Ciao.

My Keyboard and touch-pad will work during post, but will not work after the os loads?

I have a G60 and My Keyboard and touch-pad will work during post, but will not work after the os loads? Im running Windows 7, Anyone have any Ideas? I have already tried a hard reset, and safe mode???

Try pressing the fn key and f2 to reach bios
or
try a usb mouse from your desktop
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Cannot load the recovery media since my keyboard and touch pad do not work

My labtop Toshiba C55D-A5392 may have a virus issue which cause the keyboard and touch pad do not function. initially only a few keys don't work...after a couple days most keys don't work and now no keys are working and the touch pad failed too. I can't even load up windows now. I bought a recovery media from toshiba and try to reset the laptop to factory settings. I received the USB drive media from Toshiba, but I cannot load it since I cannot get the laptop into the bios (since my keyboard does not work). Can anyone help me to resolve this issue?

Try pressing the fn key and f2 to reach bios
or
try a usb mouse from your desktop
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Keyboard and Touch Pad are Dead!

Today the keyboard and touch pad died on my MacBook Pro. Both were working fine earlier this morning, but suddenly stopped working this evening. Not only that, but now OS-X takes a very long time to boot and shut down as well as Windows Vista on my bootcamp partition. Also, the cooling fan spins at full speed during boot-up and stays at full speed when the login screen appears. It never did this before.
I connected a USB keyboard and mouse to my computer, and they worked fine. I have tried the SMC reset, but the problem still persists. I have tried safe boot, but it doesn't work. Is this a case of corrupted files or something more sinister?
UPDATE
I noticed that I no longer have a sound device. When I opened Sound, there was no device listed at all. Also, the fan is running at full speed when the CPU load is minimal (98%-100% free). Think I'm gonna need some Crown and Coke after tonight.

I took your advice and went to the Apple Store in Ginza, Tokyo. I was so surprised at how easy they made the entire process! I will have my MacBook Pro repaired at no cost, because it is still under warranty. A lot of companies could learn from Apple's customer support model! Finally, you should see the fancy Star Trek-like elevator!!! Unbelievable visit today!!! Thanks Apple!

Dynabook C7 - Need part number for keyboard and touch pad

Hi there!
I have a few questions about my toshiba dynabook C7 laptop.
I want to change my old keyboard and touch pad as they do not work properly. The problem is that i can't find those parts because this model was delivered only for Japan market. So maybe somebody knows number of the models of those parts that might be suitable for my laptop? Or name of the laptop that is similar to my dynabook c7. The full model name is TOSHIBA DYNABOOK C7/212CMEN portege 4101 series
Thx in advance.
Cheers!

Hmmm... it can be pretty complicated. As you probably know it is not easy to get any info about those specific for Japan produced notebooks. I am pretty familiar with Toshiba notebook models and your notebook can be the same as Portege A100.
Google a little bit around and try to find info about Portege A100. I believe this notebook was offered in UK only.
Check also in Google - P000398500 G83C0001Q710 for Portege A100 series, Uk United kingdom keyboard.

Conflicting device error for keyboard and touch pad on thinkpad laptop

Hello,
IBM Thinkpad T43
1875
Windows XP (SP3)
Keyboard and touch pad completely do not work in Windows.
They do work in BIOS.
Tried connecting external USB keyboard. They also does not work
Getting Conflicting Device error in Device Manager for keyboard and touch pad
exclamation point is on the keyboard device.
getting Error Code 10 on keyboard.
I cant go to a prior restore point. That does not work.
tried uninstalling them, that didn't work either.
can't change auto configuration...it is grayed out.
Please help.
What can I do?

This is really strange I must say...
But you say you are using the same drivers for both 32-bit and 64-bit, this shouldn't affect the PE-part, but make sure you are using the correct drivers 64-bit for x64 OS and 32-bit for x86 :)
If you make a bootable memmory stick from the 32-bit deployment share, does it work then or is it the same problem?
Could it be as easy that the deployment share isn't updated?
//Andreas
Andreas Molin | Site: www.guidestomicrosoft.com | Twitter: andreas_molin
I also said that nothing's missing so, I thought it implies that only correct drivers are there.
I filter out all unwanted versions from both deployment shares to save on disk space.
Deployment Share have been refreshed several times with refreshing PE images too.
Mem-stick for 32-bit version works fine - keyboard and touch-pad work in it.

My Hp Pavllion dv7 keyboard and touch pad will not work

Hi. My Hp Pavllion dv7 keyboard and touch pad will not work. Been going on for a few months now. Read in the support forum that replacing the battery might help however it hasnt. Ran updates for Windows Vista and Microsoft Security Ess. Boots up just fine however unable to place in my password to get to my user profile and always have to work from guest......unless I have a USB keyboard handly at the time. I use a USB wireless mouse as well.
Please help and thank you

The keyboard and mouse (touchpad) are separate devices which could go bad at the same time but that would be a huge coincidence. I would try reseating the ribbon cables to the motherboard for both. Here is the Service Manual:
Manual

Keyboard and Touch pad is not responding

I have one Lenovo G450 with Windoxs 7 which was working fine. But suddenly I am having some strange behavior.
Like, when I am starting my laptop then its keypad or touch pad is not responding. After couple of shut down/restart (can't figure out how many times, actually its not constant) the keypad or touch pad is responding and working fine. Again when I shut down and try to start sometime later then having the same problem.
Please help.
--Bashar

Hi
Welcome to Lenovo Community
Please check the following options .
Try entering the Bios using F2 Button , If you are able to enter Bios
Load Setup defaults .
Then try to Load system to safe mode by pressing F8 key & check if you are able to use the Keyboard and Mouse
If it is working fine then try to uninstall the devices from device manager . Restart the system and boot to normal mode
and verify the keyboard & touchpad is responding .
Hope This Helps
Cheers!!!

Hp Pavillon dv7 keyboard and touch pad won't work!!!!

My touch pad and keyboard on my laptop will not work unless i how the power button for a minute while no power is hooked up.

The keyboard and mouse (touchpad) are separate devices which could go bad at the same time but that would be a huge coincidence. I would try reseating the ribbon cables to the motherboard for both. Here is the Service Manual:
Manual

Keyboard and touch pad acting crazy

Posted earlier today about crazy keyboard jumping all around.Read a few pages by others with the same problem so I stopped in to my local computer store and the tech said the best fix is to turn off the touch pad and use a wireless mouse. He also said you can't use another keyboard either that will act properly unless the touchpad is turned off.
So, here's the question. How do you turn the dang thing (touch pad) off?
All replies will be appreciated.
Edit: Touchpad turnoff button is just above the pad, hard to see but easy to touch. Turned it off, plugged in a wireless mouse and all is well again in Alabama. First time in months I don't have to re-write every line.

Hi cb! Thanks for clearing that up. I attached a detailed zip file that shows how to do that, step by step. As you have stated, either way will accomplish the task of disabling the touch pad. This doesn't have to be difficult. Choose one way or choose the other way. I personally like the flash card method. This screen shot is taken from the user guild, which I also provided in my other reply.
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
Attachments:
Capture48.JPG ‏165 KB

Helix will not connect with keyboard and touch pad

This is kind of wierd. It's been doing this since I've owned it. I have a Thinkpad USB 3.0 port replicator. When I get to work, I used to turn the screen around backwards on the keyboard and plug it into the PR. That way all you could see was the screen. Now I have a tablet stand and I remove it from the keyboard and set it in the stand. The problem I'm having is that when I have it reversed on the keyboard OR off of the keyboard all together for a period of time (say, 30 minutes) and I re-attach it to the keyboard, I can't use the keyboard or trackpad unless I press the power button for 20 seconds and hard reset the tablet. It see's the battery and plays the audio that tells me it see's it, but the pad and keyboard are unresponsive. It's frustrating. A standard reboot/restart will not fix the problem. I have made sure my tablet and keyboard have the latest BIOS and firmware updates.
SMBIOS - 2.7
UEFI Bios - 1.27
Embedded Controller Version - 1.21
It's frustrating to have to force a restart every single time I want to dock it after it's been off the keyboard for more than 20 minutes.
Any idea's?
Gavin

Does Axis say it is compatible with a 4G iPod with iOS 6.1?
Sometimes this works
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Macbook loses keyboard and touch pad

My old, white Macbook, early 2008 model, 2.4 GHz, 2GB RAM, loses access to the keyboard and touchpad on a random basis. It usually happens after the machine has not been touched for a few minutes. It does not appear to have any relationship to the power saving options though.
So far I've reset NVRAM, repaired permissions, and reset the SMC. No change.
Attaching an external keyboard and mouse allows me to keep on working, otherwise I have to force a shutdown by holding the power button down for 10 seconds to shut it off. Without the externals, there's no way to recover short of a shutdown. Everything is back to normal on the restart.
Any other ideas short of taking it in to a tech?

Thanks for the idea.
I had taken the battery out as part of the SMC reset and it was fine, though it make me wonder if there could be a heat relationship. I've had intermittent problems like this with Windows boxes when heat caused connectors to gradually work their way loose. As temperatures go up and down, when the fans run, it could cause a brief connection loss. It wouldn't have to be much to lose it. Don't know how Apple configures its hardware, but one brief glitch could cause permanent loss during the current session. Interestingly, it never happens when I'm typing or using the trackpad.

Keyboard and touch pad

I have a Laptop S-850 and the keyboard and touchpad stop working,has take the laptop to varius shop and nobody can fix it the touchpad say code10,and the keyboard the code 22.Somebody can help me please?
AG

Can you give the full model and part numbers from the label on the bottom?
- Peter

Non-responsive keyboard and touch pad

Similar Messages

Maybe you are looking for