Non Responsive to my mouse click

I'm new to Mac and I'm not sure if my problem sounds strange... Yesterday after I entered a web page in Safarai, I found that some buttons in the page did not responsed to my mouse click no matter how 'hard' I tried... The strange thing is that only some of the buttons / hyperlinks are not responsive. But if I use my PC to visit the same web page, there is no such problem.
Does anyone encounter something like this before? How to fix it? thanks.

I've encountered this problem with a few sites, notably airline ticket ordering pages. I get to the end of the process, go to "confirm purchase", and nothing. Very frustrating. Definitely "poor coding" is at play.
The resolution to the frustration was using Firefox for these type of transactions.
Have a look at your Bank's FAQ section, specifically "browsers". Do you see anything about browser compatability?

Similar Messages

CS4 becomes non-responsive when I right click

When I go to open a document in CS4 and then try to right click, delete or move files while I'm in the open screen, Photoshop becomes non-responsive and I have to shut it down and restart it, thereby losing any unsaved work. It's been doing it for awhile and I've tried to find a solution, but haven't had any luck. I've deleted my cache and that didn't fix the problem.
Can anyone help, please?

Check the mouse/driver. The functions you mention are controlled by the OS even though you are in PS.

Illustrator CS5.1 Non Responsive

Hello,
Up until recently, Illustrator worked just fine. Now, between most actions (be it clicking, copying, etc) there will be a delay where the whole window will become non responsive. My mouse will go the loading wheel and the Windows Task Manager says Not Responding. Most times, if I wait 10_ seconds, it will allow to to proceed. Occasionally, it will completely lock up Illustrator and I must force close it.
Between the moments it locks up, it runs just fine. Photoshop has not shown any problem at all, except when Illustrator locks up, it locks up as well in the background. Usually both programs are not open at the same time.
I am working on a 64-bit Win7 with an Intel i7-3820. I have tried uninstalling and reinstalling Illustrator since the issue began but it has not helped.
Thank you.

Straight to the point: That's not AI. You have a driver or other tool on your system that runs amok or your operating system is running out of resources e.g. when re-organizing it's swap file and temp folders. Could also be issues with your network stuff. You need to check your device manager and do a little housekeeping on all fronts.
Mylenium

Non responsive area on screen

Their is a band across my screen that is non-responsive to my mouse select button. from about 2 inches from the top to about 3.5 inches down from the top.
 I have tried reloading, still no change. this fault is only in firefox.
 This is my 2nd submission.
 Bill

That problem can be caused by the Yahoo! Toolbar or the Babylon extension that extents too much downwards and covers the top part of the browser window and thus makes links and buttons in that part of the screen not clickable.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

New Printer - Install - OK Button for Language Selection Non-Responsive

I just unboxed my work printer at home and was attempting to set it up. The drivers installed properly on to my computer. However, the last portion for me to complete set up is to set up the language which then will I believe ask for time zone, etc. The problem I'm having is when it asks for language the OK button is non responsive. I tried clicking on anything on the keypad and stil nothing. I reset the computer and printer. Unplugged the printer and started it back up... still nothing. Anyone have any idea why this is happening or am I doing something wrong or not doing something that should be done? Any help would be greatly appreciated. Respectfully, Robin

Hi , I read your post and see that the OK button isn't responsive. I would like to help you.
I can send you reset for the printer to try in a private message.
In the forum beside your handle name just click on the envelope to view it. If you appreciate my efforts, please click the 'Thumbs up' button below.If there is anything else I can help you with, just let me know. Thank You.

I have an ipod nano 2nd generation with a non responsive click wheel

I have an ipod nano 2nd generation with a non responsive click wheel. I have fully charged it tried resetting it and on two different computers with the latest iTunes I have restored it with the latest firmware then moved it to hold and off hold held in the menue button and select button for 10 seconds but all I get is a screen where I select the language but cant get any response from the scroll wheel.
The hold button is working (I see the lock icon go on and off) I have done the restore procedure and then reset many times but no good I am wondering if I should open it up and disconnect the battery for 30 seconds.
I would appreciate any advice thanks in advance. (This is my Daughters ipod mine is an 8 gig one.)

You need a newer model iPod, a 4G or 5G. The 2G can only go to iOS 4.2.1

Response to mouse click by combo box list and underlying clickable label

Hello,
we developed a label responding to a mouse click by opening and thereby displaying an associated help text. The label extends a project specific hierarchy of labels and thus implements MouseListener, of course. Now we encountered a strange problem: It occurs when a combo box is placed above such a label in a panel. By clicking the combo box a selective list drops down and covers the label. As soon as a mouse click is performed on a list item directly covering (i.e., right in front of) the clickable label not only this item is selected but the help screen associated with the underlying label is displayed, too. So the mouse click is processed twice: as proposed by the combo box and unwantedly by the label. This behaviour could not be reproduced on other components being placed below a combobox. So the label itself seems to be the cause but we cannot imagine what could exactly be the reason for this double reaction. Perhaps anyone heard of something like that?
We are currently working with IBM Visual Age for Java 2.0 (Java version 1.1.8 with the according Swing version). The clickable label reflectively calls methods of a model to determine whether help is available and if so later on to open this help text.
Any help is appreciated!
Danilo

Thank you for your response. I tried both to check the focus and to consume the event. But I had to learn that labels are not able to catch the focus. I also was not able to consume an appropriate event of the combobox. So I finally solved the problem by extending JButton and implementing ActionListener. Thus my labels are actually buttons but I changed their appearance and behaviour so one cannot distinguish them from labels.

I can enter a webadress in the adress field but when I hit enter nothing happens, If I press with my mouse on the side for the site to load it loads perfectly but enter pressing is non-responsive

I can enter a webadress in the adress field but when I hit enter nothing happens, If I press with my mouse on the side for the site to load it loads perfectly but enter pressing is non-responsive
I use FF4

Please re-post in the Office for Mac Product Forums hosted by Microsoft.

"non-responsive script" -- appears on screen/ extreme slows down or freeze/field can appear as many as 7 times each time i click on stop "non-responsive script"/each time the field returns immediately on screen.Frustrating!I dislike freeze or slow...

I researched the net and a lot of people are having the same problem, but did not find answers.
1. I turn on the PC and experience very slow to open firefox.
2. Then a field pops up "Non-responsive script may be what is slowing down your computer". There is computer language written in the field. In this field are 2 small fields to click on: "continue" or "stop script". I can click on stop or continue numerous times and no reaction. Then I click on close no reaction. Then finally it goes away only to pop back up as many as 6 or 7 times. It can occasionally take as long as 20 min. to open the browser. Other times the computer is just slowed down.
3. There appears to be no pattern as to when this "non-responsive script" field can appear. Even when I first turn on the PC and have not opened the browser yet it can appear in the upper left hand corner of the screen.
4. Any suggestions or help you could provide would be appreciated.

I researched the net and a lot of people are having the same problem, but did not find answers.
1. I turn on the PC and experience very slow to open firefox.
2. Then a field pops up "Non-responsive script may be what is slowing down your computer". There is computer language written in the field. In this field are 2 small fields to click on: "continue" or "stop script". I can click on stop or continue numerous times and no reaction. Then I click on close no reaction. Then finally it goes away only to pop back up as many as 6 or 7 times. It can occasionally take as long as 20 min. to open the browser. Other times the computer is just slowed down.
3. There appears to be no pattern as to when this "non-responsive script" field can appear. Even when I first turn on the PC and have not opened the browser yet it can appear in the upper left hand corner of the screen.
4. Any suggestions or help you could provide would be appreciated.

Firefox 6.02 became non responsive in my XP SP3. Once started, never respond to second click and dragging. Can't be closed in Task manager process. Still there after reboot. Only can be stop by shutting PC down and wait a few minutes. !How to fix it?

At the same time; both Chrome; IE8 and Opera remain working. Whenever it became non responsive, there is no way to stop the process unless I turn the PC off completely(and it drag this process too). I reinstalled a few times but problem remains. It even drag the PC reboot .

At the same time; both Chrome; IE8 and Opera remain working. Whenever it became non responsive, there is no way to stop the process unless I turn the PC off completely(and it drag this process too). I reinstalled a few times but problem remains. It even drag the PC reboot .

Mouse clicking issues

For the last 2 weeks or so I all of a sudden have mouse clicking issues on a 2009 iMac. The mouse (I have tried 3 different ones from apple and Logitech) seem to be able to open files etc. on a click. I have to click repeatedly to get it done. When I run the disc utility it mostly goes away. Now, I run the disc repair every morning to make it go away. Annoying. I have seen other people having similar issues - it sounds like a OS issue????

This same scenario has happened to me sporadically over the past few months and seems to be increasing. I have the Logitech Cordless Optical Mouse for Notebooks. Got it 3 years ago for use with my G4 PowerBook (1.5 GHz, 2 GB RAM, OS 10.4.8). First I thought it was the batteries, but then realized that if I'd just wait a few minutes the problem would usually go away. Nothing new electrical on my desk that would cause it. Gets really annoying. The mouse becomes sluggish and the clicks are non responsive (a right click will open a sub-menu window, but then no other clicks work. Trying to move the mouse around on the screen gives spotty results - stops and starts - as if I'm moving it on a reflective surface. After multiple clicks the window goes away. I can disconnect the USB transmitter and have complete control with the mousepad.
Sometimes the problem won't occur all day long. Other times it comes and goes multiple times during an hour. A restart will usually get it out of that overly annoying loop.
I bought a new Logitech Mouse a few days ago, thinking mine was wearing out, but the same thing happened within minutes.
I can only think there's some conflict with an OSX update. VERY frustrating. I don't want to go back to a wired mouse.
So I, too, am eager for a solution.
Thanks,
-Scott
PowerBook G4, 15 in., 1.5 GHz Mac OS X (10.4.8) 2 GB RAM; 2 LaCie 250 GB FW drives; 1 LaCie 500 GB FW drive

Non-responsive Yahoo mail page

My Yahoo mail page is non-responsive and is missing content (icons). Browser (Safari 5.0.6) or Yahoo problem?

@bckenney.
I figured out what is going on. The newer version of Yahoo mail no longer supports Safari 5.0.6. You have two choices:
1)You can upgrade your MAC 10.5.8 to 10.6 and get the newer version of Safari. You can only upgrade if you have intel processor.
2) You can change your Yahoo mail from the newer version to Basic (there is no more Classic) by doing the following:
Click the settings gear icon near your Yahoo! Mail's top right corner (or hover the mouse cursor over it).
Select Settings from the menu that appears.
Go to the Viewing email category.
Make sure Basic is selected under Mail version.
Click Save.
I opted for option 2 and it worked! I now have full access to Yahoo mail, icons and all. I actually went to another newer computer to make the switch to Basic Yahoo. Let me know if this works for you.
Best

Crashing, pages freezing up, and non-responsive scripts

I'm having issues with pages locking up, non-responsive script messages popping up, Firefox flashing in and out, and now with a recent update my Firefox is crashing.

Can you tell us what the script errors say, or create a clip.
In the address bar, type '''about:crashes'''<enter>.''' Note:''' If any reports do not
have '''BP''' in front of the numbers, click it and select '''Submit'''.
Using your mouse, '''mark''' the most '''resent 7 - 10''' crash reports, and
'''copy''' them. Now go to the reply box below and '''paste''' them in.
Hello,
In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thank you!

Automator - How do I: Mouse Click, Move Windows, and more

Hello,
I am attempting to create my own Automator programs and for a while I had some that worked nicely. I have recently been tweaking my iMac so that it can "think" on its own (by automator of course) and do things for me. However, I've run across a block with Mavericks (I believe it's due to Mavericks).
1. How can I get Automator to register a mouse click? "Watch me do" does not seem to want to work for me at all. I also would prefer if it would just be a registered mouse click, but not actually use the mouse (I know this is possible) so that if I'm doing something and it runs, it won't disturb my mouse and I can keep working.
2. How can I register a keyboard stroke? Same as above
3. How can I have automator move windows? I have two monitors and there are times when I may want it to move a window from one mintor to another
The following is a list of all the things I'm attempting to accomplish at the moment (with other things when I think of them) with automator (either through applications, folder actions, or ical actions):
1. Register a mouse click at a given area or on a given element in a safari page
2. Register a keyboard stroke in a given program (be able to focus on a program and then do the keystroke)
3. Move windows from one location to another
4. Full-screen and Un-full-screen iTunes at certain times of day
5. Download all purchased items on iTunes that aren't on the computer (sometimes iTunes doesn't download stuff if it was downloaded on my MacBook Pro first)
6. Automatically voice read reminders (that I've set in Reminders) each day at a given time (I can use loop to repeat it to make sure I hear it all)
I'll think of more of course, but the mouse click, keyboard stroke, and moving windows is the big thing I'm trying to figure out how to do. Can anyone help?
Also, I am not a computer tech. I am tinkering with this because it's fun and helpful, but an answer of "just use applescript" or "just use java" will likely just give me a headache. I know that it's going to be one of those codes, but I'm hoping someone has a "base" code that can be copied and pasted that's just a standard click that I can adjust for where I need to click and what process I need to click on.
If there is an Action Pack that includes a "Register Mouse Click" and/or "Register Keyboard Stroke", then that would work great, but the only action packs for automator I've seen that work with Mavericks is for photoshop.

You're asking for a lot in one post. It would be better to break your requests down a bit.
For example, to deal with mouse clicks, you can use the Automator Action Run Shell Script with this python script:
import sys
import time
from Quartz.CoreGraphics import *
def mouseEvent(type, posx, posy):
        theEvent = CGEventCreateMouseEvent(None, type, (posx,posy), kCGMouseButtonLeft)
        CGEventPost(kCGHIDEventTap, theEvent)
def mousemove(posx,posy):
        mouseEvent(kCGEventMouseMoved, posx,posy);
def mouseclick(posx,posy):
        mouseEvent(kCGEventLeftMouseDown, posx,posy);
        mouseEvent(kCGEventLeftMouseUp, posx,posy);
ourEvent = CGEventCreate(None);
# Save current mouse position
currentpos=CGEventGetLocation(ourEvent);
# Click the "Apple"
mouseclick(25, 5);
# 1 second delay
time.sleep(1);
# Restore mouse position
mousemove(int(currentpos.x),int(currentpos.y))
It will look like this in Automator:
To drag something (i.e. a window, a file icon) from position 40,60 to 60,300:
import time
from Quartz.CoreGraphics import *
def mouseEvent(type, posx, posy):
           theEvent = CGEventCreateMouseEvent(None, type, (posx,posy), kCGMouseButtonLeft)
           CGEventPost(kCGHIDEventTap, theEvent)
def mousemove(posx,posy):
           mouseEvent(kCGEventMouseMoved, posx,posy);
def mouseclickdn(posx,posy):
           mouseEvent(kCGEventLeftMouseDown, posx,posy);
def mouseclickup(posx,posy):
           mouseEvent(kCGEventLeftMouseUp, posx,posy);
def mousedrag(posx,posy):
           mouseEvent(kCGEventLeftMouseDragged, posx,posy);
ourEvent = CGEventCreate(None);
# Save current mouse position
currentpos=CGEventGetLocation(ourEvent);
# move mouse to upper left of screen
mouseclickdn(40, 60);
# drag icon to new location
mousedrag(60, 300);
# release mouse
mouseclickup(60, 300);
# necessary delay
time.sleep(1);
# return mouse to start positon
mouseclickdn(int(currentpos.x),int(currentpos.y));
For keystokes in AppleScript (which can be added to Automator with the Run Applescript Action) see: http://dougscripts.com/itunes/itinfo/keycodes.php

Mouse clicks send app to crazy land

I have a multi-threaded app with two main windows. One is the data display / main user interface event handler. The other is a seperate window with nothing but the menu bar--basically categorized commands that may be executed independent of what the main user interface is doing. This way I can move the commands around, hide them, etc--they are seperate.
From the user interface I am running a script. At first the sub-vi that ran scripts was a modal 'Cancel' button to end the script and return to the user interface. The modal property kept the user from doing anything with the user-interface while the script was executing. Perfect. The problem is, it also kept the user from accessing the command window. So I changed the scri
pt from a modal dialog box to a non-modal pop-up window that i set to Always-on-Top. This allows access to the command window and keeps the 'Cancel' button on top so it won't disappear behind the user interface if the main window gets clicked. Also, the user interface remains locked out because the script sub-vi is called from the user interface event handler.
The problem I have is that clicking on the main user interface (for example, selecting a different tab to view) while the 'Cancel' button dialog box is visible, does nothing. When the dialog box exits however, all of the clicks done previously (which you'd think would have been forgotten), get propogated. The application goes haywire momentarily trying to change and update things. If you clicked five different tabs while the dialog box was open, it would do nothing, then all of a sudden (when the dialog box exits), flip rapidly between the five different tabs selected, as fast as possible.
Is there any way to cancel
or ignore these mouse click events that get sent to the main user interface? Is this a problem with the windows Always-on-Top setting?

This is certainly occuring because of the "Always on Top" selection. However, there is one option you have here. You could try using Dynamic Events. They're new to LabVIEW 7.0. You can actually unregister a particular event (tab changed) and have it only trigger when you want. For instance, you could unregister this right before the cancel window comes up. Then, if the user clicks the tabs, since this event is unregistered, they will not be tallied. Then, when you get back to that window, there will be no events stored up so nothing should happen.
J.R. Allen

Non Responsive to my mouse click

Similar Messages

Maybe you are looking for