Non-secure login for 5.0 ip services
How do I change to non-secure login on phones for ip services in 5.0?
Thanks,
Andy
This gives you access to all your subscribed services without logging in every time. Keep in mind that anyone can access your information if your login mode is set to non-secure.
you need to use the SCCP Phone Security Profile in Callmanager 5.0
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a0080645855.html
Similar Messages
-
Best Non secured card for me using transunion ....
im looking to get a non secured card. my transunion score is 621. i have two baddies on my report (Loan and Lease) 5 months old and 2 years old. was approved for secured capital one which im waiting for it to report. i was hoping to get a non secured cc or store cc. any suggestions etc. thnk you
moneyshot23 wrote:
im looking to get a non secured card. my transunion score is 621. i have two baddies on my report (Loan and Lease) 5 months old and 2 years old. was approved for secured capital one which im waiting for it to report. i was hoping to get a non secured cc or store cc. any suggestions etc. thnk youThe baddie is too recent for Barclays. I'd stay away from thme until at least a year. Are there any particular stores you like to shop at? -
MS13-002 Security Update for Microsoft XML Core Services 4.0
I've tried to cache this patch 3 times now for my client and each time, it shows as cached but when trying to remediate it, it fails to cache to the client. Has anyone else had problems with this one? For now, I've disabled it but since it's listed as critical, I'd like to resolve the issue.
AMost likely running into this wonderful error that I hope is fixed sooner or
later. I got it with some of the new patches also.
http://www.novell.com/support/kb/doc.php?id=7009993
Server - ZCM 11.2.2 MU1 and Internal Database on Win2008R2x64
Client - ZCM 11.2.2 MU1 on Win7SP1x64 and WinXPx32
"princea" wrote in message [email protected]..
I've tried to cache this patch 3 times now for my client and each time,
it shows as cached but when trying to remediate it, it fails to cache to
the client. Has anyone else had problems with this one? For now, I've
disabled it but since it's listed as critical, I'd like to resolve the
issue.
A
--Alisia
princea's Profile: http://forums.novell.com/member.php?userid=2278
View this thread: http://forums.novell.com/showthread.php?t=464256 -
KB2977326 - Security Update for SQL Server Service Pack 1 repeatedly fails to install
This update fails to install every day when I shut down my computer. Here is the WindowsUpdate.Log:
2014-12-02 15:50:11:469
420 44c
AU #########
2014-12-02 15:50:11:469
420 44c
AU # Initiating install at shutdown
2014-12-02 15:50:11:469
420 44c
AU # Approved updates = 1
2014-12-02 15:50:11:516
420 44c
AU <<## SUBMITTED ## AU: Install updates / installing updates [CallId = {685C12BB-7AA9-4A31-9620-8F306EEE31C3}]
2014-12-02 15:50:11:516
420 44c
Shutdwn InstallAtShutdown starts.
2014-12-02 15:50:11:516
420 1528
Agent *************
2014-12-02 15:50:11:516
420 1528
Agent ** START ** Agent: Installing updates [CallerId = AutomaticUpdates]
2014-12-02 15:50:11:516
420 1528
Agent *********
2014-12-02 15:50:11:516
420 1528
Agent * Updates to install = 1
2014-12-02 15:50:11:531
420 1528
Agent * Title = Security Update for SQL Server 2012 Service Pack 1 (KB2977326)
2014-12-02 15:50:11:531
420 1528
Agent * UpdateId = {E0D65CC4-3B13-4352-BD89-A28C5F4C5017}.200
2014-12-02 15:50:11:531
420 1528
Agent * Bundles 1 updates:
2014-12-02 15:50:11:531
420 1528
Agent * {C076E757-1A4F-44DB-823B-CFFC07CD7D38}.200
2014-12-02 15:50:11:547
420 16d8
Shutdwn InstallAtShutdown got install progress.
2014-12-02 15:50:12:327
420 d4c
Report CWERReporter finishing event handling. (00000000)
2014-12-02 15:50:20:548
420 44c
AU WARNING: Pending directive, 'Install Approval', is not applicable
2014-12-02 15:50:24:417
420 16d8
Shutdwn InstallAtShutdown got install progress.
2014-12-02 15:50:24:432
420 16d8
Shutdwn InstallAtShutdown got install progress.
2014-12-02 15:50:24:432
420 1528
DnldMgr Preparing update for install, updateId = {C076E757-1A4F-44DB-823B-CFFC07CD7D38}.200.
2014-12-02 15:50:25:119
2052 608
Misc =========== Logging initialized (build: 7.6.7600.320, tz: -0600) ===========
2014-12-02 15:50:25:119
2052 608
Misc = Process: C:\Windows\system32\wuauclt.exe
2014-12-02 15:50:25:119
2052 608
Misc = Module: C:\Windows\system32\wuaueng.dll
2014-12-02 15:50:25:119
2052 608
Handler :::::::::::::
2014-12-02 15:50:25:119
2052 608
Handler :: START :: Handler: Command Line Install
2014-12-02 15:50:25:119
2052 608
Handler :::::::::
2014-12-02 15:50:25:119
2052 608
Handler : Updates to install = 1
2014-12-02 15:50:25:119
420 16d8
Shutdwn InstallAtShutdown got install progress.
2014-12-02 15:52:23:991
420 44c
AU AU setting next sqm report timeout to 2014-12-03 21:52:23
2014-12-02 15:54:39:587
2052 608
Handler : WARNING: Command line install completed. Return code = 0x84b20001, Result = Failed, Reboot required = false
2014-12-02 15:54:39:587
2052 608
Handler : WARNING: Exit code = 0x8024200B
2014-12-02 15:54:39:587
420 16d8
AU >>## RESUMED ## AU: Installing update [UpdateId = {E0D65CC4-3B13-4352-BD89-A28C5F4C5017}]
2014-12-02 15:54:39:587
2052 608
Handler :::::::::
2014-12-02 15:54:39:587
2052 608
Handler :: END :: Handler: Command Line Install
2014-12-02 15:54:39:587
2052 608
Handler :::::::::::::
2014-12-02 15:54:39:587
420 16d8
AU # WARNING: Install failed, error = 0x80070643 / 0x84B20001
2014-12-02 15:54:39:587
420 16d8
Shutdwn InstallAtShutdown got install progress.
2014-12-02 15:54:39:711
420 1528
Report REPORT EVENT: {DFA9CDC8-334A-4E57-9588-77B8E980833D}
2014-12-02 15:54:39:587-0600 1
198 101
{E0D65CC4-3B13-4352-BD89-A28C5F4C5017}
200 80070643
AutomaticUpdates Failure
Content Install Installation Failure: Windows failed to install the following update with error 0x80070643: Security Update for SQL Server 2012 Service Pack 1 (KB2977326).
2014-12-02 15:54:39:727
420 1528
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2014-12-02 15:54:39:727
420 1528
Report WER Report sent: 7.6.7600.320 0x80070643 E0D65CC4-3B13-4352-BD89-A28C5F4C5017 Install 101 Unmanaged
2014-12-02 15:54:39:727
420 1528
Report CWERReporter finishing event handling. (00000000)
2014-12-02 15:54:39:805
420 1528
Agent *********
2014-12-02 15:54:39:805
420 16d8
AU Install call completed.
2014-12-02 15:54:39:805
420 1528
Agent ** END ** Agent: Installing updates [CallerId = AutomaticUpdates]
2014-12-02 15:54:39:805
420 16d8
AU # WARNING: Install call completed, reboot required = No, error = 0x00000000
2014-12-02 15:54:39:805
420 1528
Agent *************
2014-12-02 15:54:39:805
420 16d8
AU #########
2014-12-02 15:54:39:805
420 16d8
AU ## END ## AU: Installing updates [CallId = {685C12BB-7AA9-4A31-9620-8F306EEE31C3}]
2014-12-02 15:54:39:805
420 16d8
AU #############
jim...Hello,
Please examine the Summary.txt log file. The following article may help you locate the file on disk:
http://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx
If you find the sentence “A failure was detected for a previous installation” on the Summary.txt log file, please repair SQL Server using the following article:
http://msdn.microsoft.com/en-us/library/Cc646006(v=sql.110).aspx
If you find other errors, please share the content of the Summary.txt log file with us.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
OBIEE: Skip separate login for Presentation services
All,
I wanted to use my LAN ID login for my BI Presentation services instead of having separate login screen there.
Meaning if i click on my BI Presentation services link it shouldn't ask for a separate login id /password it should receive my LAN id/password directly from the system & as i click the link i should be able to get the Dashboards according to my access rights.
As of now i am using OBIEE only in my local.
I am using 10g.
Please provide Ur valuable answers at the earliest.
Regards
FRHi FR
You need to look into Single Sign On (SSO). Have a read of this and do some google searching:
http://sranka.wordpress.com/2008/06/06/enabling-sso-authentication-for-obiee/
Regards
Paul -
Security Update for Microsoft visual C++ 2008 Service pack redistributable package
HI, I need help? I received an IMPORTANT UPDATE FOR Windows 8.1 and later drivers, "Security Update for Microsoft C+ + 2008 Service Pack 1 Redistributable Package (KB2538243)". I tried to find more information on this update,
but I did find an update just like it but it was for "2013" instead of "2008". my question is, Do I have to install this exact update? My computer has been updated to windows 8.1.. I don't know if that makes any difference either,
or Can I find an newer version of the "Security Update for Microsoft visual C Service pack Redistributable package ". Also received this one SAMSUNG Electronics Co., Ltd - Other hardware -"SAMSUNG Mobile USB composite Device."
after I had unplugged my phone from the USB port, on laptop. I couldn't find much information on it either an if I really needed it I usually don't have my phone plugged into the USB port on my laptop that was like the second time that it has
happened when the electricity went out to charge it. my question is do I really need to install Visual studio 2008 or newer an do I need the SAMSUNG MOBILE USB composite device and what are they?
Does anyone know what Microsoft Silverlight (KB2977218) is, is it important and do I need it? Can anyone help me please?
Thank you for your help..
Thanks Tina MausHello Tina Maus,
Do you receive an important update KB2538243? Please share us a screenshot for better analyzation.
As you use the Windows 8.1, it is recommended to install the Visual C++ Redistributable Packages for Visual Studio 2013.
http://www.microsoft.com/en-hk/download/details.aspx?id=40784
It supports Windows 8.1.
Do you use SAMSUNG mobile phone?
And about the SAMSUNG Mobile USB composite Device, to receive better support, it is recommended to contact the SAMSUNG support.
Silverlight is a powerful development tool for creating engaging, interactive user experiences for Web and mobile applications. But if you are not a developer, it is not necessary for you.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support -
How to uninstall/remove security update for SQL Server 2012
My requirement is to uninstall/remove security update for SQL
Server 2012 Service Pack 1 only. so are these below steps are correct or do I need to take any extra precaution for uninstallation?
Go to Control panelàProgramsà
Programs and FeaturesàInstalled Updrtes, right click on update and uninstall
As per my knowledge in SQL Server 2005, we cannot uninstall a service pack. we have to uninstall SQL Server 2005 completely, and reinstall SQL Server 2005 with previous service
packs and updates. but Starting SQL Server 2008, we can uninstall a service pack using Control Panel.
Rahulhttp://blogs.msdn.com/b/askjay/archive/2011/02/07/uninstalling-a-sql-server-service-pack.aspx
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
Create a Secure Client for a Secure Web Service- is failing
Hi,
This is actually with reference to the webservice tutorial.I am trying the example on Create a Secure Client for a Secure Web Service and have followed all the steps mentioned,however I am getting the following error:
D:\JDev11gTp\jdk\bin\javaw.exe -client -classpath D:\Jdev11gTpInstance\mywork\WebServiceApplications\.adf;D:\Jdev11gTpInstance\mywork\WebServiceApplications\WebServiceProjects\classes;D:\JDev11gTp\webservices\lib\jaxws-api.jar;D:\JDev11gTp\webservices\lib\jws-api.jar;D:\JDev11gTp\webservices\lib\orawsmetadata.jar;D:\JDev11gTp\webservices\lib\wsclient.jar;D:\JDev11gTp\j2ee\home\lib\activation.jar;D:\JDev11gTp\j2ee\home\lib\ejb.jar;D:\JDev11gTp\j2ee\home\lib\jms.jar;D:\JDev11gTp\j2ee\home\lib\jta.jar;D:\JDev11gTp\j2ee\home\lib\mail.jar;D:\JDev11gTp\j2ee\home\lib\servlet.jar;D:\JDev11gTp\webservices\lib\jaxrpc-api.jar;D:\JDev11gTp\webservices\lib\wsserver.jar;D:\JDev11gTp\webservices\lib\wssecurity.jar;D:\JDev11gTp\webservices\lib\wsdl.jar;D:\JDev11gTp\webservices\lib\orasaaj.jar;D:\JDev11gTp\webservices\lib\saaj-api.jar;D:\JDev11gTp\webservices\lib\orawsdl.jar;D:\JDev11gTp\webservices\lib\orawsrm.jar;D:\JDev11gTp\webservices\lib\orawsrel.jar;D:\JDev11gTp\webservices\lib\jaxr-api.jar;D:\JDev11gTp\webservices\lib\orajaxr.jar;D:\JDev11gTp\webservices\lib\relaxngDatatype.jar;D:\JDev11gTp\webservices\lib\xsdlib.jar;D:\JDev11gTp\webservices\lib\mdds.jar;D:\JDev11gTp\webservices\lib\wsif.jar;D:\JDev11gTp\webservices\lib\fabric-common.jar;D:\JDev11gTp\webservices\lib\fabric-interceptors.jar;D:\JDev11gTp\jlib\jaxen.jar;D:\JDev11gTp\jlib\oraclepki.jar;D:\JDev11gTp\jlib\ojpse.jar;D:\JDev11gTp\jlib\jsr106.jar;D:\JDev11gTp\jlib\jsr105.jar;D:\JDev11gTp\jlib\osdt_xmlsec_jce.jar;D:\JDev11gTp\jlib\osdt_wss_jce.jar;D:\JDev11gTp\jlib\osdt_saml_jce.jar;D:\JDev11gTp\jlib\osdt_saml2_jce.jar;D:\JDev11gTp\jlib\osdt_core.jar;D:\JDev11gTp\jlib\osdt_cert.jar;D:\JDev11gTp\jlib\osdt_xmlsec.jar;D:\JDev11gTp\jlib\osdt_wss.jar;D:\JDev11gTp\jlib\osdt_saml.jar;D:\JDev11gTp\jlib\osdt_saml2.jar;D:\JDev11gTp\jlib\ojmisc.jar;D:\JDev11gTp\j2ee\home\lib\http_client.jar;D:\JDev11gTp\j2ee\home\jazncore.jar;D:\JDev11gTp\j2ee\home\oc4jclient.jar;D:\JDev11gTp\rdbms\jlib\xdb.jar;D:\JDev11gTp\j2ee\home\lib\javax77.jar;D:\JDev11gTp\lib\java\api\jsr173_api.jar;D:\JDev11gTp\lib\java\shared\sun.jaxb\2.0\jaxb-impl.jar;D:\JDev11gTp\lib\java\shared\sun.jaxb\2.0\jaxb-xjc.jar;D:\JDev11gTp\lib\java\shared\sun.jaxb\2.0\jaxb1-impl.jar;D:\JDev11gTp\j2ee\home\lib\oc4j-schemas.jar;D:\JDev11gTp\jlib\ojdl.jar;D:\JDev11gTp\jlib\ojdl2.jar;D:\JDev11gTp\jlib\fmw_audit.jar;D:\JDev11gTp\j2ee\home\lib\jmxri.jar;D:\JDev11gTp\j2ee\home\lib\jmx_remote_api.jar;D:\JDev11gTp\j2ee\home\lib\adminclient.jar;D:\JDev11gTp\j2ee\home\lib\jmxframework.jar;D:\JDev11gTp\j2ee\home\lib\jmxspi.jar;D:\JDev11gTp\j2ee\home\lib\xmlcfg.jar;D:\JDev11gTp\jlib\dms.jar;D:\JDev11gTp\jlib\orai18n.jar;D:\JDev11gTp\j2ee\home\lib\commons-digester.jar;D:\JDev11gTp\j2ee\home\lib\spring.jar;D:\JDev11gTp\lib\java\shared\oracle.wsm\11.1.1.0\wsm-policy-core.jar;D:\JDev11gTp\lib\java\shared\oracle.wsm\11.1.1.0\wsm-pmclient.jar;D:\JDev11gTp\lib\java\shared\oracle.wsm\11.1.1.0\wsm-pap.jar;D:\JDev11gTp\lib\java\shared\oracle.wsm\11.1.1.0\wsm-agent.jar;D:\JDev11gTp\lib\java\shared\oracle.wsm\11.1.1.0\wsm-secpol.jar;D:\JDev11gTp\lib\java\shared\oracle.javatools\11.1.1.0.0\javamodel-rt.jar;D:\JDev11gTp\lib\java\shared\oracle.javatools\11.1.1.0.0\javatools-nodeps.jar;D:\JDev11gTp\lib\java\shared\oracle.toplink\11.1.1.0.0\toplink-sdo.jar;D:\JDev11gTp\lib\java\api\jaxb-api.jar;D:\JDev11gTp\lib\xmlparserv2.jar;D:\JDev11gTp\lib\xml.jar;D:\JDev11gTp\jakarta-taglibs\commons-logging-1.0.3\commons-logging.jar -Dhttp.proxyHost=localhost -Dhttp.proxyPort=8099 -Dhttp.nonProxyHosts= -Dhttps.proxyHost=localhost -Dhttps.proxyPort=8099 -Dhttps.nonProxyHosts= HelloPolicyPortClient
Feb 1, 2008 5:13:43 PM oracle.j2ee.ws.common.context.ContextInterceptor init
INFO: Context provider properties file not found
Feb 1, 2008 5:13:44 PM oracle.wsm.audit.Auditor <init>
INFO: Created J2SE auditor for componentType=OWSM-AGENT busstop=D:\oracle\product\10.2.0\client_1\auditlogs\OWSM-AGENT filter=false auditor=oracle.security.audit.Auditor@143a083
Feb 1, 2008 5:13:44 PM oracle.wsm.audit.Auditor <init>
INFO: Created J2SE auditor for componentType=OWSM-PM-LIB busstop=D:\oracle\product\10.2.0\client_1\auditlogs\OWSM-PM-LIB filter=false auditor=oracle.security.audit.Auditor@15af049
SEVERE: WSM-04514 An MDS error occurred.
SEVERE: WSM-09012 No key, WSM-06002, was found in the resource bundle oracle.wsm.resources.policyvalidation.PolicyValidationMessageBundle.
javax.xml.ws.WebServiceException: oracle.fabric.common.PolicyEnforcementException: PolicySet Invalid: WSM-06002 PolicyReference Invalid policy reference
at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:466)
at oracle.j2ee.ws.client.jaxws.WsClientProxyInvocationHandler.invoke(WsClientProxyInvocationHandler.java:204)
at $Proxy28.sayHello(Unknown Source)
at HelloPolicyPortClient.main(HelloPolicyPortClient.java:35)
Caused by: oracle.fabric.common.PolicyEnforcementException: PolicySet Invalid: WSM-06002 PolicyReference Invalid policy reference
at oracle.integration.platform.common.InterceptorChainImpl.createPolicyEnforcementException(InterceptorChainImpl.java:217)
at oracle.integration.platform.common.InterceptorChainImpl.processRequest(InterceptorChainImpl.java:104)
at oracle.j2ee.ws.client.mgmt.runtime.SuperClientInterceptorPipeline.handleRequest(SuperClientInterceptorPipeline.java:91)
at oracle.j2ee.ws.client.jaxws.DispatchImpl.handleRequest(DispatchImpl.java:309)
at oracle.j2ee.ws.client.jaxws.DispatchImpl.handleRequest(DispatchImpl.java:290)
at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:444)
... 3 more
Process exited with exit code 0.
Can anyone please give any clue as to why this error is coming?
Thanks.Hi
Please refer to this thread
Re: Can I create a login/password protection in Muse for a HTML5 page or two? -
If I go to a website that requires a login & password, and I have it set up to automatically log me in, I get automatically logged in (it remembers by userid & password for that site), but the prompt from the Software Security Device for my master password appears as well. I can cancel the prompt and it goes away, but it shouldn't show up because I'm already logged in. This problem started happening after I downloaded Firefox 24 yesterday.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Note that Firefox Sync also requires you to enter the Master Password. -
WS-Security and proxy service: Unable to add security token for identity
What the reason of "Unable to add security token for identity" fault in this situation (10.3.1):
I did simple "hello word" proxy service and tried to apply custom policy binding.
WS-Policy is next:
<wsp:Policy wsu:Id="WS-Policy-Siebel"
xmlns:sp="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702"
xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy"
xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wssp:Identity
xmlns:wssp="http://www.bea.com/wls90/security/policy">
<wssp:SupportedTokens>
<wssp:SecurityToken
TokenType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#UsernameToken">
<wssp:UsePassword
Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText" />
</wssp:SecurityToken>
</wssp:SupportedTokens>
</wssp:Identity>
</wsp:Policy>
Process WS-Security is setted to "yes".
While debugging I see that all works fine - I can authenticate with defined credentials and breakpoints in proxy service flow works fine.
But at the end I get the fault:
Soap fault:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header/>
<env:Body>
<env:Fault>
<faultcode>env:Server</faultcode>
<faultstring>Unable to add security token for identity</faultstring>
</env:Fault>
</env:Body>
</env:Envelope>
In console:
<09.06.2010 17:39:18 MSD> <Error> <OSB Security> <BEA-387023> <An error ocurred during web service security inbound response processing [error-code: F
ault, message-id: 1721282272521583996--57dc4ccc.1291cc2282d.-7fab, proxy: OSB Project WS-Security/WSSecurityService, operation: NewOperation]
--- Error message:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/><env:Body><env:Fault><faultcode>env:Server</faultcode><faultstring>Un
able to add security token for identity</faultstring></env:Fault></env:Body></env:Envelope>
weblogic.xml.crypto.wss.WSSecurityException: Unable to add security token for identity
at weblogic.wsee.security.wss.SecurityPolicyDriver.processIdentity(SecurityPolicyDriver.java:175)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:73)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:64)
at weblogic.wsee.security.WssServerHandler.processOutbound(WssServerHandler.java:88)
at weblogic.wsee.security.WssServerHandler.processResponse(WssServerHandler.java:70)
Truncated. see log file for complete stacktrace
Incoming soap message is:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<wsse:Security soap:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:UsernameToken wsu:Id="unt_TNNp0cBwU7HyPKoq" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsse:Username>testuser</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">testuser</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</soap:Header>
<soapenv:Body>
<wss:NewOperation xmlns:wss="http://www.troika.ru/Enterprise/WSSecurityService/">
<in>string</in>
</wss:NewOperation>
</soapenv:Body>
</soapenv:Envelope>
Edited by: Andrey L. on Jun 9, 2010 5:55 PMI thought you were getting that exception when accessing the proxy.
No. Authentification works fine. Proxy body works fine. But at the end of proxy appears the exception.
Sorry for my english - I tried to show this situation on image: http://imglink.ru/show-image.php?id=9c0e0c1719f00289faf11696c6703bc3
Are you getting this exception when routing to a business service which is configured for WS-Security ??
I don't use business service in this test project - only simple proxy service with all logic inside.
PS transformation in replace action is very simple too:
(:: pragma bea:global-element-parameter parameter="$newOperation1" element="ns0:NewOperation" location="WSSecurityService.wsdl" ::)
(:: pragma bea:global-element-return element="ns0:NewOperationResponse" location="WSSecurityService.wsdl" ::)
declare namespace ns0 = "http://www.troika.ru/Enterprise/WSSecurityService/";
declare namespace xf = "http://tempuri.org/OSB%20Project%20WS-Security/Hello/";
declare function xf:Hello($newOperation1 as element(ns0:NewOperation))
as element(ns0:NewOperationResponse) {
<ns0:NewOperationResponse>
<out>Hello, { data($newOperation1/in) }!</out>
</ns0:NewOperationResponse>
declare variable $newOperation1 as element(ns0:NewOperation) external;
xf:Hello($newOperation1)
Edited by: Andrey L. on Jun 10, 2010 12:21 PM -
Security Settings for two admin groups with shared service
Hi all,
I use Essbase Administration Services 11.1.2 and Hyperion Shared Services Console 11.1.2.0.73 (Drop 17)
Access Rights are granted via Groups in Hyperion Shared Service Console.
We have two admin groups.
AccessGroup 1: admin rights on some cubes (A) and read rights on all others (B).
AccessGroup 2: admin rights on (B) and read rights on (A).
If someone of AccessGroup 1 copies a cube of (A) – Fin_rep for example – wether AccessGroup 1 nor AccessGroup 2 can even see the cube (and i dont even mention admin rights) execpt the one who copied it.
Settings in Shared Services Console:
- Both groups have role "Create/delete application" and "AccessManager" (or something like that - german word is "Zugriffsberechtigungsmanager") on Essbase Cluster (our essbase server).
- AccessGroup 1 has role "ApplicationManager" and "AccessManager" for all cubes which they should administrate (A)
and role "Read" for all cubes with read only (B)
- AccessGroup 2 has role "ApplicationManager" and "AccessManager" for all cubes which they should administrate (B)
and role "Read" for all cubes with read only (A)
I hope i can get some help with this topic.
Thank you in advance,
Best regards
Bernd
Edited by: 907705 on 07.02.2012 02:52Security will not copy over when you create new cube from old cube. You have to grant security to required groups using shared services or Maxl.
-
Security Update for exchange server 2013SP1 KB3011140 Stops all services and failes to install
Hi All,
Over the past 2 days this update has tried to run on the server in the evening but ends up failing. When it fails it is causing all of our exchange services to stop working and when we try to check e-mails the following day we find out the e-mail service
has been offline since the update.
Is there anything specific we need to do before running this update?
Cheers,Hi,
As what Hotaka says, this update is available from
Windows Update. If it fails, we can also download and install the updates manually. The following stand-alone file is available for download from the Microsoft Download Center:
Download the security update for Exchange 2013 Service Pack 1 package now.
Download the security update for Exchange 2013 Cumulative Update 6 package now.
Regards,
Winnie Liang
TechNet Community Support -
Initial and expired password status is not checked during login for ITS Services
Dear all,
we have the following Basic problem or question regarding ITS-based ABAP Services provided via browser to internal and external customers:
The user call the ITS via URL "https://<host>:<port>/sap/bc/gui/sap/its/it13?sap-client=03&sap-language=en" his browser.
To access the Service a simple login Dialog appears for entering the credentials (UserID + Password).
The problem with this simple Dialog is that after resetting the users password this initial password status seems not to be checked here.
That means, that the user is able to login with this initial password and he is not forced to change the password.
In difference to this the intended behavior is provided for example when the SAP Standard ITS Service "webgui" is launched by the user:
The user launches der Service via URL "https://<host>:<port>/sap/bc/gui/sap/its/webgui?sap-client=03&sap-language=en"
In this case an additional first SAP WebAS login dialog appears where the users has to click on a Login-Button. This login button opens
another login dialog as a popup where the user is able to enter his credentials. But if the password has an initial status the user is
forced afterwards to change his password.
So the login behavior of the webgui Service is what we also want for the any other ITS Service. We've already compared the service properties and
settings (SICF), but we could not find any difference.
What can we do to change the login behavior for the ITS services ?
Thanks in advance for any kind of help !
JoergHello Joerg,
Can you attach a screenshot of the "Logon Data" tab of the service 'it13' in transaction SICF?
In SICF - Tab: Error Pages -> Logon Errors
is 'SYSTEM Logon' selected for both the 'WEBGUI' service and 'IT13' service?
Regards,
Oisin -
Secure login to sql 2012 database for webusers
We build up a new website in .net mvc 4.0 on a w2012 server with MSSQL 2012 database.
We use windows autentification and normal anonymous access through NT AUTHORITY\IUSR who is also a login in the database.
But we make extra login possibility for users who are registered and they can insert and modify data in some tables in the database. And I'am afraid of giving NT AUTHORITY\IUSR insert and update for some column in tables.
I think of set up a new login for the database. Run a new connection string on login and set up special permission for that extra user on the database, set up a new role and let the new user become member, but also let the user become a member of the ordinary
user(roles) in the database.
Have anyone any idea what is the best practice here and the most secure way to do it?
Any links for other resources about this topic?
Or perhaps my fear for using NT AUTHORITY\IUSR is groundless
And perhaps someone has links to resources for using SQL server as a backendserver for websites.
Knut from Norway!I don't know much about web servers, which may explain your alternatives entirely.
But, if you use the same connection string for reads that you do for updates, then you must control all permission for writes in the web app. And you must be sure that you only use parameterised SQL or stored procedures, so that there is no risk for SQL
injection.
If you give special logins for the users with read access, they would need their own accounts in SQL Server. If this is an intranet site, the web server may be able to impersonate these users and then connect to SQL Server. If that does not work out, you
would have to create SQL logins for these.
Obviously, this requires more administration, but it is also more secure, because you are adding a line of defence. Even if your application is free from SQL injection vulnerabilities today, some new badly educated kid on the block could open a hole two
years later.
Erland Sommarskog, SQL Server MVP, [email protected] -
Cumulative Security Update for Windows XP Service Pack 2 Warning!
Not sure how many of you guys remember the problems associated with the Windows XP Service Pack 2 when it was first released, but the latest Cumulative Security patch completely disabled my Plextor 708A DVD drive and locked up Windows Explorer.
Here is the problem patch:
o Cumulative Security Update for Internet Explorer for Windows XP Service Pack 2 (KB883939)
It caused my Plextor 708A to give off two blinking Amber lights, which according to Plextor indicates the drive is defective. Plextor actually tells you to get a RMA ticket and to return the drive. Luckily I found it odd that my DVD drive became defective after I installed the latest windows update and tried uninstalling the 'fixes' before going that route. Fortunately, removal of one of the 'fixes' solved my problem.
If you find that your DVD or CD Player no longer works after doing a windows update, then do the following:
o Go to Control Panel
o Select Add Remove Programs
o Scroll to the bottom and select Security Update for Windows XP (KB883939)
o Click 'Remove'
o Restart your computer
I might not have the latest security fix right now, but at least my computer is running.
Stu: Can you report this to MSI and have them get in touch with M$?i will, if this is a problem affecting a lot of users.
has anyone else experienced this problem?
Maybe you are looking for
-
My 3rd generation nano is stuck in hold mode
My nano is stuck in lock/hold mode and the mode does not change once I toogle the stick. What should I do?
-
Best approach to append multiple Access tables together using java?
Hello, I've been given the task of retrieving data from a collection of Access files and storing them in a MySQL database. The program I wrote works fine, but the problem is that the data is broken up by months and not years. I need access to a years
-
Processor Intesive Tasks Freeze my iMac... Please help!
Hello, I have G4 iMac. I have 1GB of RAM and recently started running OS X off of an external 300GB hard drive. I have a problem with my computer freezing; forcing me to shut it down by holding the power-button. The problem does not occur in my daily
-
After Effects CS6 running painfully slow
I am working on a composition in Adobe After Effects CS6, and it's running painfully slow. I've tried to mess with some of the settings in the preferences, and lowering the quality of the preview. But I still feel like I'm running terribly slow consi
-
Help!! Cannot print to Epson 4900 using PS-CS4 on Mac 10.8.4?
My new MacBookPro using Photoshop CS4 prints just fine to my Epson 2400 and 1900 however when using my new 4900 I click "print" and the printer icon bounces once in the dock and then disappears. The printer then gyrates and makes noise but puts out