Non stampa da note

Non parlo inglese per chi capisce ho un problema con ipad stampa AirPrint da tutto ma non dall'applicazione di NOTE!!

Hello candini,
Welcome to the HP Support Forums!
To get the most out of posting in the Forums, you would want to post questions in English. If you are able to do so, I would try my best to help.
Thanks,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

Text not printing or PDFing. Non-printing is not applied. Help?

I have a logo. The top is on a path applied to an oval. Same with the bottom. In the middle is an ampersand (&). When I try to print, only the ampersand prints. I've tried printing to 2 different machines. I also tried saving it as a PDF but I lose everything except the ampersand in the middle. Everything is colored black, so there are no weird colors going on. Non-printing is not applied to anything. Any thoughts? I can send the file to somebody if they want to check it out.
ID CS 3
Thanks,
Chris

Sorry for the delay. Spent some time looking for the font becasue I'm on Windows.
I opened it first in CS5, and after font substitution it exported fine, so I figured maybe it was a font problem on your end, but just to be safe I opened it in CS3 to check. Same problem here that you have on your end.
Good news, though. I exported to .inx and opened that. That page opened at 11 inches high, which may be part of the problem, but after resizing, it exported correctly. This is a pretty good inidcator of some minor corruption that is fixable by the export. See Remove minor corruption by exporting

My microsoft office programs (Home and Business 2013) all desplay error message at startup stating " non-commercial use, not licenced product". How do I fix this?

Hi,
Whenever I start any of my microsoft programs I get an error message stating "non-commercial use, not licenced product" and I cannot do anything in the programs. I havve the Home and Business 2013 version.
My husband bought the office programs for his and my computer and so they are both registered to his name however my email is the login, I dont know if this is relevant.
How do I fix this?

Hi,
Based on your description, several possibilities come to my mind.
1. You mentioned your husband bought the Office Suite for you, did he purchase one product key or two? We need to confirm if the product key can be installed on multiple machines, if a product key can be only installed once and he installed it
on his computer first, you should purchase a new product key to activate your Office.
Since the policy differs in different areas, to confirm how many machines the product key can be installed on, let your husband ask the retailer or contact the local customer service to get the answer:
http://support2.microsoft.com/gp/customer-service-phone-numbers/en-us
2. Please confirm your Office version. Based on the message "non-commercial use", I found this kb:
http://support.microsoft.com/kb/937676/
But it's for Office Home and Student instead of Office Home and Business, we can perform the steps below to find the Microsoft Software License Terms:
1. Start and Office program.
2. On the File (Backstage) tab, click Account.
3. Click About (Product name: Word, Excel etc..), in the window that opens, click
View the Microsift Software License Terms link.
3. If your Office is a trial version or the product key is not for the version that you are using, consider to uninstall it first, and install the appropriate version. You can probably get the installation media from your husband.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

HT201363 How can I make an Apple ID without credit card if the "none" tab is not visible to me?

How can I make an Apple ID without credit card if the "none" tab is not visible to me?
Help me out please

Hello, aligt9p.
Thank you for visiting Apple Support Communities.
To create an Apple ID without a credit card, there is a specific series of steps that have to be processed in order to allow the payment to be set as none on creation of the account.
Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card
http://support.apple.com/kb/HT2534
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/TS5366
If the specific steps have not been processed, a credit or debit card will be required to complete the setup the account.
However, it can be removed and payment method changed to none as long as there is not an outstanding balance.
iTunes Store: Changing account information
http://support.apple.com/kb/ht1918
Cheers,
Jason H.

How can i remove my credit card from app store, the none option its not there and i don't Owen nothing to apple, my last in app purchase was in clash of clans, please help!!! Because of that problem i cant update my apps! Plz help!!!!!

How can i remove my credit card from app store, the none option its not there and i don't Owen nothing to apple, my last in app purchase was in clash of clans, please help!!! Because of that problem i cant update my apps! Plz help!!!!!

You've logged into your account and viewed your purchase history and there aren't any error messages shown (e.g. 'problem with a previous purchase'), and you haven't got any purchases due (e.g. pre-orders and/or subscriptions) : Why can’t I select None when I edit my Apple ID payment information ?

Flash streaming from non-native websites not working on 10.1

Note: I am running:
Windows 7 64 bit
Internet explorer 8 32 bit, Firefox 3.6.3 (32 bit)
Flash player version: 10.1.53.64
Graphics card: Nvidia GeForce GTS 240
Graphics card driver: 257.21
Hi, Adobe Flash 10.0 was working perfectly until I upgraded it to 10.1. When I upgraded it to 10.1 by uninstalling the old version and installing the new version, the streaming function partially stopped working. I also upgraded Firefox separately, and the streaming function is working perfectly. However, my streaming Pandora Gadget on my desktop is NOT working correctly, it shows only a teeny box with a couple of shapes & colors in it, no error message whatsoever. The same is true for when I try and use embedded Youtube videos (such as on the Yahoo! website) on Internet Explorer 32 bit, but the videos on youtube directly are working perfectly. When I go to the Flash Install screen, it says it installed itself correctly, and shows the animation. I tried disabling the Hardware Acceleration, but it still didn't work on the non-native websites & the Pandora Gadget. When use an administrator account, both Internet Explorer & the Pandora Gadget work, anything I could do to make flash run in a user account besides changing them to administrator?

There are a number of posts in this forum regarding Flash Player 10.1 and non-Admin accounts not working correctly. So far there seems to be no solution apart from reverting back to 10.0

Can video chat with Imac non-intel but not with Powerbooks

Hi,
I have a Linksys WRT54G firmware v. 1.0.6 connected to a Comcast Cable modem. My IMac Intel Duo (OS 10.4.6) is connected via ethernet cable to the router. I am set to DHCP on router and IMac. My Quicktime settings is at 1.5mb, I have tried with firewall off and on with the appropriate ports open. I have tried upnp on and off.
I can connect to other Imacs (non-intel) but not to powerbook G4's. With the Powerbooks I can text chat, but sometimes they can see my text, but I can't see theirs. And every video chat is a fail to respond with the powerbook, but they can connect with others.
Is there anything else I can do?
Please help. Thanks.

Hi cmbell,
Do you know how to access your modem ?
This should give you somewhere to turn off DHCP.
Then you go to System Preferences > Network and select the connection method you are using.
Then select the TCP/IP tab.
In the drop down that says Using DHCP change it to Manually. (or Manual with DHCP if doing James' way)
Type the IP you wish to use in the next entry field.
Copy the subnet mask form the Using DHCP
Copy any DNS servers listed.
Copy the router IP address which will be the modem or router in question.
Hit Apply.
Done.
9:23 PM Sunday; May 7, 2006
Message was edited by: Ralph Johns (UK)

Problem when applying a custom stamp, it shows on my document on the screen but when I print it, the stamp is not there.

I have my pdf open, I created a custom stamp. Applied the stamp to the document and I see it. Save my document and then do either a print preview or print it and the stamp is not showing! This method of applying stamps used to work but something has changed. I thought it even worked when using Acrobat Standard X but can't be sure. Really need help as even documents I created previously with stamps applied and I have proof that they printed with the stamp, won't print with the stamp on it. Thank you.

You don't even need to use a third party tool.
Open the JavaScript Console (Control+J)
Type the text string below in the JavaScript Console and hit Control+Return key.
this.flattenPages();
It will flatten all of the annotations and fields within the document to ensure that all the comments and stamps print.

Time stamp does not update automatically

Hi, All. I want include the time stamp (yyyy-mo-dd-min-sec) in the file name. However, the value of the time stamp does not update automatically/synchronizes with the computer clock at each new run. I need to do it manually with the right click and update the time to the current.
How can I solve this? Thanks a lot in advance.

What does this have to do with NI counter/timer hardware?
What language are you using and what function are you using to get a timestamp? If the language is LabVIEW, then all you need is Get Date/Time in Seconds. If you are using a front panel Time Stamp control, then you are using the incorrect function.

HT2534 In Payment type None option is not available...

In my payment type screen, "NONE" option is not available.... I have only three types, "1.VISA, 2.Master Card, 3. AMEX".... I dnt want to register with my credit card detail.... I want use only free applications..... Can any one help me in this.....?

Follow the article:
You must first sign out from existing account.
Settings > Store > Apple ID :youroldID > Sign Out
Then go to App Store to buy a Free App.
From popup window. select Create New AppleID
Indicate Store location and provide necessary information
None option will then be available

HT2534 What if the none button is not on billing info

I went to change my billing info after my son bought things without my permission, and I can't change my billing info to None because the None button is not present.

You have to resolve the problem before you can use the account for anything. Have you contected iTunes?
Apple - Support - iTunes - Contact Us
You can create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card

HT2534 The none button is not exist? So what is the problem?

Iv tried so many times to review my payment info in order for me to download free apps in the store... but seems like the 'none' button is not exist... what did i missd?

You need to follow, exactly, the instructions on the HT2534 page that you posted from when creating an account - if you don't use those instructions then credit card details will need to be entered before the account can be used to download any item (after entering your card's details you should then be able to remove them).
I've just tried the instructions and been able to create a new account with 'none' as the payment option, verified the account, and downloaded a free app.
Steps for creating an account with 'none' on a computer's iTunes : https://discussions.apple.com/message/24321860#24321860

HT2534 none option is not available in the page

none option is not available in the page. Kindly help me to review my apple id without giving credit card details. Thank you.

Welcome to the Apple community.
Open iTunes and navigate to the app store. Select a free app to download. A simple way to do this is to scroll down to the top free apps box on the right hand side, hover your mouse over the first item and click on the free button that appears when you hover over it.
A pop up will open asking you to sign in with your Apple ID click "create new account", click continue to create your account. Check the box to accept the store terms and conditions and click continue.
Enter your email address, password, security question, and date of birth, click continue. Now, you will be asked to provide a payment method. Note now that the last option says "none".

B1400 non-root does not display/monitor temperature

I have root and non-root B1410 bridges. The root bridges will show temperatures in the GUI. The non-root do not. They show a WARNING: No Reading temperature monitoring is at 'INITIALIZE' state. What does this mean? I have not been able to find any reference. Other than root/non-root parms, I see nothing that is different in these configurations. They are in remote locations and temperature reporting is needed.

Thanks for the response. After some digging I found this BUG.
It says fixed in 12.3(8)JA
BUT I CANNOT FIND 12.3(8)JA for the 1400....
BUG ID: CSCsb63034
Bug Details
Headline show env No Reading Temperature monitoring is at INITIALIZE non-root
Product br1410
Feature OTHERS Duplicate of
Severity 3 Severity help Status Verified Status help
First Found-in Version 12.3(4)JA First Fixed-in Version 12.3(8)JA Version help
Release Notes
Symptom:
Non-root bridge running 12.3.4.JA & greater 'show env' output sometimes shows:
Environmental Statistics
Environmental status as of 09:47:18 S Aug 8 2005
Data is 55 second(s) old, refresh in 5 second(s)
WARNING: No Reading temperature monitoring is at 'INITIALIZE' state.
No Reading temperature is at 0 (C)
Workaround:
None but this appears to be cosmetic.
-pat

I am trying to edit my billing information, I want to deactivate it but the NONE box is not appearing..? Anyone? (iPad)

I want to deactivate my billing information on my app/iTunes Store. I know how to get to the editing bit of it but the NONE box is not appearing....? I am on an iPad

You have to use your credit card and make a few purchases before you can get the "None" option.

Non stampa da note

Similar Messages

Maybe you are looking for