Non-standard application use of iMovie and Pyro AV Link

I want to pipe my 12" PC screen into my 2' iMac screen. I must use a hardwire solution and cannot use VNC or remote control over the web. I can get into the details, but no need here.
So my question: can I use a VGA/DV converter to feed the screen signal from my laptop into the PYRO AV Link, then use iMovie to view the input in real time, without saving to disk? Will the resolution be OK for my needs. Anyone done anything remotely like this? I do not want to buy the hardware if I am not somewhat confiedent it will work.
TIA

It's both iMovie and the Pyro. The resolution is dictated by Standard Definition TV resolution.
There is no way to get HD TV resolution in from that kind of source (a computer monitor).
There are screen capture applications for both Windows and Mac OS X that captures video (and audio). Try Google.

Similar Messages

We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double

We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double clicked in Mac 10.6.7 at out clients location, its not opening. For your information the client is able to open this same application by double clicking on index.swf file. The main problem is that client is not able to open the application using index.app file at their office whereas we are able to do so at our office. Can anyone give some suggestions to sort this problem?

The most common reason is different versions of Flash, or different versions of web browsers used. Some users may elect to not have Flash installed at all because of the processor overhead of Flash. If you are going to make an application for a client, check what operating system and browser versions they are using first. Then determine if a stand alone application is required, or if they have the necessary plugins to run specific browser enhanced code.
P.S. MAC is an acronym for Media Access Control. Mac is the shorthand for Macintosh, the operating system and computers made by Apple Inc.

I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?,

I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?, I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?, I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?

Thanks, Flex harUI, for the direction in regards to isolating build changes. That aside (still working on it), can you offer any direction in regards to my original question on SDK and AIR compatibility? I'm specifically looking for a version compatibility mapping or anything that definitively states, "Flex SDK x.y.z works with the following versions of AIR". This information is crucial for us in order to more specifically plan our own roadmap built upon these two frameworks as we consider both existing installations of our software and future distributions.

Pictures are blurry when slideshow is burned to dvd using iPhoto, iMovie and iDvd. How do I correct?

I used iPhoto, iMovie, and iDVD... How do I create a slideshow burned to a DVD without getting blurry images when slideshow is played through DVD a player?

You created the slideshow using the built-in Ken Burns effect in iPhoto or iMovie? I've never found that to be up to my expectations; additionally, if the people or objects in the pictures have certain designs (in their clothes), using movement can blur them. I use Photo to Movie myself - to me it creates the smoothest movement in slideshows. Another possibility is the size of your images: did you increase or decrease their original size? And when you encoded it, what settings did you use? I use the Share > Quicktime > Expert settings and then choose these options:
I've found that these settings result in the most lossless conversion. After the new .mov file is saved to the desktop, I then add it to iDVD after creating a customized menu and theme.

Data source for application using both pooled and non pooled connections

Hi guys.
I am integrating Oracle's connection pooling into an existing application that had formerly used dbConnectionBroker. It looks like this task should be quite straightforward. However, for consistency, I would also like to replace other Connection logic within the application to use Oracle classes. This will involve using OracleDataSource to obtain a Connection object. ( without pooling ).
So in this case, the application will use both pooled and non pooled Oracle connections. They will be connecting to the same database. The question I have is in regard to the use of data-sources.xml.
Are there any special considerations for the required attribute values within data-sources.xml under this scenario ?
Help will be greatly appreciated.
Regards.
Steve.

Hi Steve -
It should be feasible for you to define a single datasource using multiple location entries to indicate what sort of pooling behaviour you wish to use.
If you lookup and use the "location" attribute, you will receive a javax.sql.DataSource object which will not provide connection pooling.
If you lookup and use the "ejb-location" attribute you will receive a DataSource object that will support connection pooling operations.
Note that this is using the emulated datasource approach, and transaction support is limited to a single resource (one database) for these datasources - you won't get 2PC support for transactions.
If you need a transaction to span two separate resources (ie two databases in same tx) then you will need to use the non-emulated datasource approach.
There is a chapter in the J2EE Services Guide which describes the datasource model we have with OC4J. This might provide you with some more useful information. See Chapter 11 - http://otn.oracle.com/docs/products/ias/doc_library/903doc_otn/generic.903/a97690/ds3.htm#1004903
cheers
-steve-

SSO to non SAP Application using SAP Logon Ticket

Hi Experts,
I Have EP 7 SP 15 using SPNego Wizard to SSO with Active Directory and SSO between EP and ECC using SAP Certificates.
Now I have a demand to SSO some JAVA based applications (non SAP) to my portal using the SAP Logon Ticket.
I Have followed some blogs that directed me to use SAPSSOEXT (some libs) to read the MYSAPSSO2 cookie. The problem is that I didn't found this cookie, I even executed the command javascript:document to look for this cookie but the browser just show me the JSESSIONID info.
Does anybody knows where I can find this cookie or if there's a better way to set up this SSO? It´s necessary to say that I cannot SSO these application to the kerberos protocol because some security reasons on my company.
Thanks
Armando

Hi,
I dont have much info related but i can giv u hint
refer OSS Notes 442401 and 723896.
When using SAP logon tickets for non-SAP applications, two different implementation options are available. The difference lies in where the ticket verification takes place.
In the first case, the SAP logon ticket is submitted to the web server filter located on the web server. The web server filter verifies the portal serveru2019s public key
certificate using its local Personal Security Environment (PSE) and then populates the HTTP header field with the user ID for SSO to the non-sap web application.
In the second case, the SAP logon ticket is sent to the non-SAP application, which then verifies it using the ticket verification DLL and submits the user ID to the application for SSO.
You can refer following link :-
http://help.sap.com/saphelp_nw70/helpdata/EN/89/6eb8deaf2f11d5993700508b6b8b11/frameset.htm
user authentication and SSO
http://help.sap.com/saphelp_nw70/helpdata/EN/8f/ae29411ab3db2be10000000a1550b0/frameset.htm
Authentication Using a Directory with SSO Integration Using Logon Tickets
http://help.sap.com/saphelp_nw70/helpdata/EN/f8/3b514ca29011d5bdeb006094191908/frameset.htm
SSO
SAP Logon Ticket-based Single Sign-On
http://help.sap.com/saphelp_nwce10/helpdata/en/45/b6af743753003ae10000000a11466f/frameset.htm

Retrieve data from a non-peoplesoft application using HTTP Get

I need to retrieve data from a non-peoplesoft application. They want us to submit a HTTP GET request to their URL with a series of parameters. I am thinking about using HTTP Targert connector to accomplish this. Does anyone have sample peoplecode?
Currently we are on 8.51.10 Tools...
If there is any better way .. please let me know ..

I have used HTTP Get to get XML file from a government sanction list by hitting URL http://www.treasury.gov/ofac/downloads/sdn.xml
There is a delivered PS program that does that for vendor sanctions. I had to get the online setup correctly by creating a new custom Node with HTTP Target Connector. The program name is BSP_IMPORT. The below code is responsible for the calling the node and retrieving the data. Play around with the code below see if you can get it to meet your needs.
BSP_IMPORT_AET.BANKNODE.Value is just the custom external code that I created.
PMT_FLAT_FILE_INBOUND message is just a none rowset based message to use the web service call.
Local TR:FileUtilities:FTP &oFTPUtil = create TR:FileUtilities:FTP();
+/* HTTP */+
+/*******************************************************************************/+
Local Message &msgHTTP;
Local Message &msgResult;
+&msgHTTP = CreateMessage(Message.PMT_FLAT_FILE_INBOUND);+
+&oFTPUtil.PopulateFTPGetIBInfo(&msgHTTP, BSP_IMPORT_AET.BANKNODE.Value);+
+&msgResult = %IntBroker.ConnectorRequest(&msgHTTP);+
+/* check to see if the file is wrapped */+
+&strAllLines = &msgResult.GenXMLString();+
+&strAllLines = Substitute(&strAllLines, Char(26), " "); /* Added this line to remove invalid characters */+
+/*******************************************************************************/+
Edited by: Maher on Mar 20, 2012 3:28 PM

Flip mino or flip ultra HD to use in imovie and final cut express

i am contemplating either flip mino HD, Flip ultra HD or creative vado HD. Which one has a good video quality and design style? Is it necessary for 2 hrs movie or actually i like the flip mino coz its slimmer but only takes 1 hr video. By the way, What kind of format the flip camcorder will save as coz someone says its .avi but some says Mp4 format? If in Mp4 format, is the quality still good? most of the time i will shoot in ultra hi definition setting. I will use imovie and final cut for edit and does the Flip compatible to imovie and Final cut? How about creative vado? any recommendation?
But most likely i will get the flip.

The Flip cameras are easy to use and pocketable.
Unfortunately it is their very simplicity that drastically limits what they can do.
They are OK for someone who wants to take daft pictures of their friends and post them on YouTube but for serious film-making they are non-starters.
They record low quality highly compressed video onto an internal memory.When you have shot your 60 minutes of video you can’t use the camera any more until you get it to a computer and download it.
The lens is a small aperture fixed focus with no zoom.
Actually to be correct there is a 2x digital zoom, but as we all know, digital zooms are a total waste of time and only reduce the quality still further. You can get the same effect by enlarging your picture 2x in the computer - not to be recommended.
So what at first sight, to the uninitiated looks like a very cheap camera, quickly turns out to be a very expensive toy.
Much better to buy a proper camera (which won't cost all that much more) like Skalicki suggests.

Convert iTunes videos to use in iMovie and iDVD

Okay, I have downloaded some videos from iTunes Music Store. I do not own an iPod that can support videos. I want to use the videos in iMovie and eventually put them in iDVD to play on my home DVD player. However, I cannot find a converter so that I can place them into iMovie or iDVD. How can I convert them from .m4p to a format that iMovie or iDVD can recognize?
There must be a shareware, freeware or commercial product that can do this conversion.

Sorry, but the copy protection on the videos (mandated by the content owners) prevents you from converting the videos to any other format. They can only be played (in iTunes or QuickTime Player or on a video-capable iPod); they cannot be used in any other application.

Is it possible to load a non-standard image using some Java API?

Hi,
My "problem" is:
1. I have an image called "mediterranean_sea.IMG" (non-standard image format)
2. I need to process it (histogram, palette, etc).
3. I'm wondering if it is possible to load this image an process it using some Java API.
4. I've tried to do this using JAI but I think that this API only works with TIFF, PNG, JPEG, etc.
Any idea?
Thanks in advance,
Roger

[url http://forum.java.sun.com/thread.jsp?thread=468188&forum=31]Cross-post

Which application uses that file and prevents emptying the Trash?

Hi,
This has been with the OS for quite some time. Every once in a while, when trying to empty the trash, I get the error message:
"The operation can’t be completed because the item 'filename.estension' is in use."
How useless is that? Now, if OS X told me which application is using it, I could close that one application, delete the file, and get back to work. Sometimes, I can guess the application as the one I actually last used to access that file. But every so often, it's the Finder's "quick look," but every once in a while, I just haven't the clue.
So, is there an OS function (even if a UNIX/terminal command) or a utility that can tell me the application that is still using the file in the Trash?
Thanks, Tristan

Hi,
OK, to clarify: yes I use Lion (OS X 10.7.4) and I'd rather not close all applications. With Lion, I can just as well log out (which will close them) and log back in (which will reopen them). But, you realize that this is using a bulldozer to swat a mosquito: somewhere in the bowels of the OS X/UNIX, there is a "file in use" message from some application/process, which has not been cancelled (either because the application/process is really holding the file open or because the application/process has failed to clear the "file in use" flag).
A similar "feature" of OS X is when it prevents you from ejecting a volume because "it is in use." In that case, the "What's keeping me?" utility (by HAMSoft Engineering) comes to rescue, unearths the relevant culprit and reports it to the user. Yes, OS X should be doing it all by itself, but the 3rd party utility is just fine.
So, isn't there a way to unearth this info?

Presentation on Industrial Applications using NI products and Labview

Hi All,
Can anybody provide me with some of the presentation or related material for National Instruments and LabVIEW Applications.
I think we used to have this kind of presentations/material on NI's website but i guess they have removed the same.
I want to make a presentation for NI and LabVIEW based applications.
I have gone through the link http://www.ni.com/solutions/ where i think earlier they had some material for the same.
I hope NI Application Engineer's and other experienced guys would help me for this...!
Dinesh Kumar
Certified Labview Associate Developer(CLAD)
Don't Forget to Rate the answers.!!! You can do it in few seconds

Hello Dinesh,
>From your name, I am assuming you are based in India. If that's true,
send an e-mail to [email protected] and they should be able to help you.
Hope this helps.
Regards,
Abhishek
Dinesh Kumar wrote:
> Hi All,
>  
> Can anybody provide me with some of the presentation or related material for National Instruments and LabVIEW Applications.
> I think we used to have this kind of presentations/material on NI's website but i guess they have removed the same.
> I want to make a presentation for NI and LabVIEW based applications.
>  
> I have gone through the link <a href="http://www.ni.com/solutions/" target="_blank">http://www.ni.com/solutions/</a> where i think earlier they had some material for the same.
>  
> I hope NI Application Engineer's and other experienced guys would help me for this...!
>  
> Dinesh Kumar

15" MBP with Nvidia vs. Non for heavy use of iMovie

I would like to purchase a new 15" MacBook Pro and am wondering if I should get the more expensive one with the Nvidia Graphics Card or without. I like to do a lot of video editing on iMovie and have thousands and thousands of photos on iPhoto that I like to edit.
Do I need the Nvidia graphics card or should I get the standard 15" model and up the memory/processor/hard drive?
Thank you!

Perhaps if I put it this way...
Does anyone know what temperature I need to stay under so that the video card does not detach again?
I have istat monitor and it shows a few different temps.
thanks for any help...

Email application using dreamweaver MX and ASP...Is this possible?

Hello
I would like to create a web application that would allow
users to create and send emails a bit like Outlook but a bespoke
version.
There are a few things that this email application should do
such as:
1) Allow you to enter name, address, email address and job
category for each contact.
2) filter email list based on that above criteria eg. list
all the contacts that have a job category of Manager. One contact
may have one or more job category so the list would need to remove
any duplicates.
3) The email should get sent to everyone on the filtered list
so it would need to be able to send to multiple email addresses
4) The user should be able to send attachments.
I hope this makes sense. It would be great if I could do all
this in Dreamweaver.
Any help would be much appreciated on how I could develop
such a application and also if there any tutorials that I could
follow which allow me to do something similar.
Thanks

Hopefully this will set you in the right direction.
1. Create a user table. You will need to do this mentally
before actually
creating the database. What will the table contain? After you
have this
spec'd out, you can create it. You should create your entire
database
before creating it in whatever software you'r eusing (mySQL,
Access, SQL)
2. Design your jobs table. This will contain all info you
need to store
about the job.
3. Create a form that uses lists to build your "email". This
should be a
form that says, select Name, Adress or job category. This
will feed into
your SQL statement(or DW recordset), which will bring up all
your contacts
where your Name field in your user table (or Address, or Job
Category or all
three). You can tweak this until you get it just how you like
it.
4. Lastly you should have a very simple form (you don't
mention what server
language you're using) that will build an email based upon
the contacts you
have selected and email them.
You will need to get the database up and structure setup
before I could help
you more with it. Do you feel comfortable doing that?
"aman16" <[email protected]> wrote in
message
news:[email protected]...
> Thank you for your reply. Its much appreciated.
>
> I have made website in Dreamweaver before using ASP and
databases. I dont
> usually hande code though and just use the built in
tools that Dreamweaver
> MX
> has as standard. I just need a step in the right
direction really thats
> why I
> would appreciate any tutorials that you may no of which
do something
> similar or
> maybe do a part of what I am trying to do. I could get
as far as making a
> database with contacts and all there details and then
making an ASP page
> to
> display that information and maybe filter it in some way
but I dont know
> how to
> then extract the email address from that filtered info
and then make a
> form to
> type the message and attach any attachments and then
email the form to all
> the
> email addresses from the filtered list.
>
> You mentioned that there are web based email
applications out there that I
> can
> customize to do a similar thing. Could you let me know
of any names of
> these
> programs so I can then read up about them? I would like
to customize it
> quite a
> bit though to try and make them as bespoke as possible.
>

TS2518 I recently had to get a new hard drive on my MacBook Pro because of a crash. I was able to restore to my latest backup, but now when I need to upload to an application like DropBox, iMovie, and such, it won't acknowledge Aperture. I have Lion OS.

I recently had my hard drive crash on my MacBook Pro (OS Lion 10.7.5). I was able to restore my new hard drive from my latest backup, but since then have been unable to access Aperture Library from another application. When I 'request' an upload --- like to Drop Box, iMovie, or anything --- and it drops down the window for you to choose which library you want to choose from, Aperture is not acknowledged. It will show my iPhoto Library and Photo Booth.
I can export from Aperture to Facebook and Flicker, but not from the other direction. Any ideas on how to resolve this issue?
Thanks,
Brenda

Brenda,
Do you mean, the Media Browser is not showing the Aperture Library? What version of Aperture 3 do you have, and where is your Aperture library stored, on your system drive or an external drive?
For the Aperture Library to be visible in the Media Browser you need to have enabled the generation of previews in the Aperture "Previews" preferences. Do you have the option enabled "Share Previews with iLife and iWorks"? And have you the generation of previews enabled?
One other reason for Aperture not showing in the Media Browser could be a corrupted Aperture library. I suggest you try the "Aperture Library First Aid Tools" and repair your Aperture Library. Start with reapairing permissions, then try the other options, if necessary. See:
Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
Another reason may be a corrupted preferences file; remove your Aperture preferences from your User Library, see Aperture 3: Troubleshooting Basics, the paragraph on removing preferences.
Regards
Léonie

Non-standard application use of iMovie and Pyro AV Link

Similar Messages

Maybe you are looking for