"non-standard" characteers

How do I print non-english/us letters in a prinln?
For ex., I want to print out this:
System.out.println(��) ;
It doesen't print out the characters, but some irrelevant symbols - as I expected. How do I print them? And, can I tell the println to print out a character of a given ascii value?

in msdos appearslike this:
cora��esThese are non-english characters. So you already are doing what you asked. You just aren't printing the correct ones. It sounds like you are using the wrong encoding.
i used your code, the msdos returns the same... but
beeps too!The code was just an example of who to print an arbitrary ascii character. The 'bell' character was the example. You weren't supposed to use the alarm bell in your code.
ASCII codes do not include not English chars. Extended ASCII does, but you want to use unicode not extended ASCII.

Similar Messages

G5 Second Display using the GeForce FX 5200 - Non-Standard

I have a Dual 1.8 GHz PowerPC G5 Macintosh.
The display adapter installed is as follows:
GeForce FX 5200:
Chipset Model: GeForce FX 5200
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 64 MB
Vendor: nVIDIA (0x10de)
Device ID: 0x0321
Revision ID: 0x00a2
ROM Revision: 2060
Displays:
VX2235wm-3:
Resolution: 1680 x 1050 @ 60 Hz
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Display:
Status: No display connected
I want to attach a second display to my machine, but the second plug on the card is a non-standard DVI-type connector. It looks like this:
x x x x x x x x x x X X
x x x x x x x x x x -----
x x x x x x x x x x X X
...with 10 rows of 3 as opposed to 8.
I have had trouble finding an adapter to use to convert this to VGA (which is what I meed to connect my second monitor). I've searched the Apple Store online to no avail, as well as Google. Perhaps I've had no luck because I don't know the name of this part.
Any help is much appreciated!
~Rob Blaze

Hello! Does the port look like the one below? If so you'll need an adapter. Tom
Actually, HERE is the page i was looking for that shows and describes all dvi connections.
Apple ADC Connector
[IMG]http://img300.imageshack.us/img300/9497/appleadcconnectorve2.jpg[/IMG]
Message was edited by: Thomas Bryant

How To: Use FCPX to create iPhone Portrait Movies (and other non-standard formats)

Goal: Use Final Cut Pro X 10.0.7 to produce a 640x1136 video (iPhone 5 Portrait). You can use these same steps to produce virtually any dimensions you want. My example is for the iPhone 5, in Portrait mode.
This information is available in various places, but you have to realy work to find it, so I thought I'd post a step-by-step guide here.
By the way, you might think you could just create a FCPX Project with your desired dimensions, but you can't (at least with 10.0.7). Projects only support certainly dimensions. But there are other ways, as the rest of this post describes:
1) Create an initial movie with the desired dimensions, to serve as a template. We'll call it "Template.mov". The only thing that matters is the dimensions. It can be in any codec FCPX understands, and virtually any length.
I'm using a 2 second video shot on my iPhone for the template. You could also create a blank image (.png, whatever) with the proper dimensions, copy and paste it into a new Quick Time Pro 7 window, and Export it using custom settings. There's lots of different ways to do this.
2) Drop Template.mov into a FCPX event.
3) Select Template.mov in the Event browser, and select File->Duplicate (or command-D). You probably could just edit "Template.mov", but it's a good idea to save it for reuse.
3) Change the name of the copied video. I'm using "iPhone Video".
4) Right-click "iPhone Video" and select "Open in Timeline".
5) If you made the Template video from a still image, you may need to change the duration (ctrl+D). You don't have to make it very long, but it needs to be longer than 1 frame. A few seconds should be enough.
6) Use this timeline like you'd use a project's timeline. Drop in new content, trim, transition, etc. There may be things you can't do in it, but I haven't found any yet. I'm guessing Chapters may not work, but I haven't tried them.
7) Note that when you drop new content into the timeline, it may size funny. That's because the default setting for "Spacial Conform" is "Fit". Simply select the newly-dropped content, and in the Video settings inspector, scroll down to "Spacial Conform" and change it. You could use "Fill", which fills the frame vertically, or "None", which uses the source's original height. Then crop/transform/whatever to get what you want.
8) When you're ready to render, select "iPhone Video" in the Event browser, then use the "Share" button. You want to use the "Export File" destination, which you may have to add. Pick your codec, and let 'er rip.
9) When the rendering is done, you should have a video in your desired dimensions.
That's all there is to it. Hope this helps someone.
Dan
PS: Don't ask why someone would want to create an iPod video using FCPX. The point is that you may need to create a video with non-standard dimensions at some point in time, and this is how to do it.
PPS: Most of this information came from http://library.creativecow.net/articles/payton_t/FCPX_Custom-Resolution-Timeline s/video-tutorial. I just wrote it down, while I tried to do what the video suggested.

Instructions for using QuickTime Pro 7 to create a template video with unusual dimensions.
I suspect that anyone savy enough to be using FCPX has probably already figured out how to do this, either using my technique or another, so there probably isn't a real need for me to post this. For that matter, I may be the only person who cares about this at all. However, while I was trying to learn how to do all of this, I would have really appreciated having all the information in one place, so here goes.
If you want to create a video with unusual dimensions (like 640x1136) using my steps above, you'll need a "template" video first. Here's an easy way to create one, using any image editor, and QuickTime Pro 7.
1) Open QuickTime Pro 7 (QTP for short).
2) From the menu, select File->New Player. You'll get a window with just the bottom portion of the player, i.e. the playback controls.
3) Using an image editor, create a still image in the desired dimensions. You can use any image editor. It doesn't matter what the image contains (although it will end up showing as a thumbnail in FCPX).
4) Copy the image to the clipboard.
5) Switch back to QTP, and paste the image into the new player. Don't worry that there isn't a video window showing - just paste it into the window that has only playback controls. As soon as you do, the video window appears.
6) Advance to the end of the movie (the short, 1-frame movie), then hold down Command+V (paste) and keep holding it down to paste multiple images in. Watch the time advance. You could, if you want, just hold down Command+V until you get the length you want. But if you want a long video, there's an easier way:
7) When you reach a few seconds (or whatever duration your patience allows), select all (Command+A) and copy (Command+C). Then hold down Command+V to keep pasting in the longer clips. Wait until you reach a longer duration, then repeat the process. So, for example, 1 second, then 10 seconds, then 1 minute, then 10 minutes, then 1 hour. Or whatever you want.
8) Save the video however you want. I usually use File->Export with H.264, with Quality set to "Least". Just make sure you don't let it change the dimensions. If you resized the player window, depending on which "save" or "export" method you've chosen, it might default to the resized dimensions, so double check that to make sure.
That's it. You now have a template video you can use with my previous post(s).
Dan

Using non-standard sshd port after 10.8 upgrade

After spending hours tracking down this solution as a result of losing my ssh settings after the upgrade to Mountain Lion, I thought it might be useful to post the steps taken to restore the configuration I used with Snow Leopard.
Changing the sshd default listening port
Disclaimer: This tutorial is specific to Mountain Lion (OS X 10.8). I was able to accomplish this using Snow Leopard (OS X 10.6) in fewer steps, but upgrading required this more involved solution.
Steps:
1.) You must first enable the root user account in order to change the relevant files. This can be done from the terminal, or by going to System Preferences --> Users & Groups. Once there, click on 'Login Options' at the bottom of the Current User list, and 'Join' where it says 'Network Account Server'.
This will bring up a smaller window. Click on 'Open Directory Utility' at the bottom. You will be prompted for your admin password. Now go to the 'Edit' tab at the top of the screen and toggle down to 'Enable Root User'. You will be prompted to enter your admin password twice.
2.) Log out of your regular user account. At the log in screen you will now see an additional entry for 'other'. Click on that and log in with the username 'root' and your admin password. If are inexperienced as a root-level user, be careful as you can cause problems to your system can be difficult to undo.
Once in your root account, the first step is to create a new 'service definition' in the etc/services file. Open the file with text editor of choice and scroll to the current entry for sshd listening port, which will look like this:
ssh    22/udp    # SSH Remote Login Protocol
ssh    22/tcp     # SSH Remote Login Protocol
Overwrite the '22' with the port number you would like sshd to listen on:
ssh    12345/udp   # SSH Remote Login Protocol
ssh    12345/tcp    # SSH Remote Login Protocol
*12345 being our hypothetical, non-standard port.
It is important to note that the new port number will not take by simply adding a new uncommented line to the file (I tried), unless of course you comment the original ssh entries. Easiest way is just to overwrite what is there already. Save changes.
3.) You now need to edit the ssh.plist file, which is located at /System/Library/LaunchDaemons/ssh.plist. A word to those familiar with Linux/BSD environments: changing the default port in the sshd_config file, which exists in OS X, does NOT change the listening port. Simply changing the default port, saving the config file, and restarting the server (the sensible way) won't work. The OS X sshd server (openssh) is configured to get launch instructions from the ssh.plist file, as opposed to sshd_config. If you are more interested in this aspect of OS X, read up on LaunchDaemons (e.g. launchd).
Before altering the ssh.plist file, you should save a backup copy in case of mistakes, or if you need to revert back to it in the future. Name your backup file something like original.ssh.plist, etc.
In the ssh.plist file, locate the SocksServiceName entry and change it from the default:
<key>SockServiceName</key>
<string>ssh</string>
To the following:
<key>SockServiceName</key>
<string>$alternate port number</string>
In our example from above this value would be 12345.
4.) Save your changes, and exit ssh.plist. You now need to move the backup file you created (original.ssh.plist) out of the System/Library/LaunchDaemons path.
The updated sshd port will not take until you have only one ssh.plist file in the LaunchDaemons directory - this has to do with how launchd is configured to load files which is outside the scope of the current discussion. (*If you've found a way around this, please share.)
5.) Restart the sshd server. Easiest way to accomplish this is going to System Preferences --> Sharing and clicking off 'Remote Login', then clicking back on it.
6.) Test the configuration by logging into the machine running the sshd server from another host using:
ssh username@ipaddress -p 12345
There are a few good tutorials out there that capture some of these steps, but many are dated and/or incomplete. If you are running a standard setup of OS X 10.8, this should work for you.
Of course, don't be fooled into thinking that changing the default listening port from the ubiquitously-probed 22 equates to actual security. At best, it will cut down on the number of dubious connection attempts and probing.

Hi all, above helped me change the sshd port number, thank you very much.
Just upgraded to OS X 10.9.3 on my macbook pro.
My findings were:
Step 1(become a root user or sudo)
Step 2 (/etc/services)
This may not be required unless you want ssh to work without the "-p XXXX" option to connect to other ssh hosts. I favor such as "ssh -p 2222 user@hostname" just to be sure I know what I am doing and also to leave ssh known port as its default "22".
Step 3 (/System/Library/LaunchDaemons/ssh.plist)
This is required if you want to change the sshd port number, I changed both "ssh" to "2222" in this file.
Step 4 (launchctl)
Below is a must as I understood:
launchctl unload /System/Library/LaunchDaemons/ssh.plist
launchctl load /System/Library/LaunchDaemons/ssh.plist
it should be already working with the new port number.
You can "ssh -p 2222 user@localhost" in the console terminal and see if its working.
Since I am no expert on MacOS X, and it is a macbook pro that I am using, I also rebooted the system and changes were reflected permanantly.
Thank you guys!

AV output and non-standard frame sizes

I usually work in non-standard frame size for my FCP projects because my final output will be in a 2:35:1 ratio. I use a Blackmagic Ultrastudio Mini Monitor as an HDMI output to a client monitor. Up until a few months ago the AV output of FCPX would allow the Mini Monitor to accept a frame size of 1920x818 and letterbox the output to 16x9 on this consumer grade LCD. One day, this just stopped working... I've reached out to Blackmagic and they have no solution or reason why this happened, and are not willing to offer support since what I was achieving wasn't an "officially supported" feature. Now, the AV output will distort the image vertically to fill a 16x9 frame. At this point I am stuck having to use either a matte layer or a widescreen effect on individual clips to output correctly to my monitor which increases edit time having to re-render any edits underneath the matte and having to re-order the letterbox effect after apply color correction etc. It was also very easy to adjust the frame offset with this wide angle project size.
Is anyone editing in 2:35:1 (or other cinema standard) projects and getting successful conversion on output? What are you using?
Cheers,
Matt

Thanks Tom, you clarified it ....... or at least something clicked in my brain.
I was trying to set "Custom" when I created the new project.
I didn't know, or had forgotten, that in the "error" window I could select "Custom".
All is now well and FCP X 10.1.1 is pretty clever after all!
There is one weird thing I'd like to mention.
When I clicked on "Custom" the 960 x 600 frame dimensions appeared but the frame rate was listed as 23.98p as shown in the screenshot below.
So what's wrong with that?
Well the clip is 30p and I naturally thought I was going to end up with a project with an incorrect frame rate.
Now here's the funny thing ......... when I selected the project and viewed it in the Inspector it was the correct 30p
So why was I given that worrying piece of misinformation.

Is it possible to load a non-standard image using some Java API?

Hi,
My "problem" is:
1. I have an image called "mediterranean_sea.IMG" (non-standard image format)
2. I need to process it (histogram, palette, etc).
3. I'm wondering if it is possible to load this image an process it using some Java API.
4. I've tried to do this using JAI but I think that this API only works with TIFF, PNG, JPEG, etc.
Any idea?
Thanks in advance,
Roger

[url http://forum.java.sun.com/thread.jsp?thread=468188&forum=31]Cross-post

How to use non-standard port for vnc?

Our Windows users who use RDC to connect to their desktops from off-site come in on a non-standard port number. Part of our security setup.
I'd like to do the same with Mac users who use screen sharing and vnc to connect remotely.
How can I specify another port number at both ends to accomplish this?
I can find nothing in the Network Utility app, or in the KB.
Surely there's a short sequence of Terminal commands that will do this?

I haven't tried this so don't know whether it will work. But I think it will. Presuming the target machine is a Mac, see if editing its /etc/services file will do it. Find the two lines that start with "vnc-server" and change the port number there. Launch Terminal.app as an administratively privileged user, sudo pico /etc/services, ^w to search for vnc-server, make the changes, ^x to exit, y to save and overwrite. Also, you will need to have screen sharing enabled in the target machine's System Preferences' Sharing, and the authorized users defined there, too. Reboot. Now, on the remote client, assuming it is also a Mac, the user would type ⌘k in the Finder (or mouse to Finder > Go > Connect to Server), and enter something like vnc://123.45.67.89:55900 where you substitute the actual IP address or host name for where I have entered 123.45.67.89, and where you substitute the actual alternate port number where I have entered 55900. Of course, in the clients' Screen Sharing's Preferences, they should choose to encrypt the entire session, not just the login. Like I said, I haven't tried this because I just tunnel my vnc stuff through ssh, but I'm thinking that this should work.

Oracle DB: How to parse XML where element names are non-standard ?

I'm in the unfortunate situation that I have illegal XML that I would like Oracle to parse. By 'illegal' in my case is that there are element names that start with an illegal character, such as a digit. Apart from this the XML is syntactically valid.
Here is an example of the XML I have stored as a column in the database:
<schedule>
    <1stweek>
    </1stweek>
    <2ndweek>
    </2ndweek>
</schedule>Right now I'm doing text search-and-replace on the XML text before I let Oracle parse it, for example replacing '<1stweek>' with '<x1stweek>' and so on. Needless to say this is very slow.
My question is if there is a way to tell the XML parser in the Oracle DB (I'm using version 10.2) to be a bit more forgiving ? ... so that it will accept element names that start with e.g. a digit ? I know that such an option exist in some XML parsers but what about Oracle's and if so how to set the option?
And before you ask I'll answer myself: No, I'm not the one who created the non-standard XML. It is from a third-party application which I cannot change myself and cannot get the vendor to change either.
Thank you.

if you cast your clob to an xmltype then you can search and extract values based on tags.
Heres an example where the table is a clob and value is cast and I'm looking for an existing attribute_name.
Check out the Oracle XML developers Guide
select u.*
FROM preload_xml
, XMLTable(
'/ApplicationProfile/ScriptFragment' PASSING xmltype(xml)
COLUMNS name varchar2(50 char) PATH '/ScriptFragment/@Name'
) u

Making non-standard size pdfs from Microsoft Word 2003 on pc

I have Acrobat 8 Professional (pc, Windows XP op system), and want to know how to make a pdf from Microsoft Word (2003) where the dimensions of my document remain as they are, a non-standard size, such as 5.5" x 8.5". All the choices of "paper size" are standard only, and if I check "Custom" and type in the non-standard dimensions, it doesn't work. In other programs, such as InDesign, I can make a pdf of any document size I want with no problems. Does anyone know how to make this work for Word on pc?

You can create a custom page size for Acrobat.
In Word:
File > Print (choose AdobePDF) > Properties.
On the Adobe PDF Document Properties tab, choose Add next to Adobe PDF Page Size.
Type in a name for your new custom page size and type in your dimensions.
Click Add/Modify to close that window, then select your newly created paper size from the drop down.
Click Ok to close that window
Click OK to print
For future printing, you would not have to redefine the page, just choose it from the dropdown.

Accessing websites running on non-standard ports or with self-signed ssl certs?

I've got some sites running using self-signed ssl's that also run on non-standard ports. Firefox home doesn't seem to open these pages it just sits there with the spinner loading and a blank screen...
Anyone else noticed this?

If the ASA is using a certificate issued by a CA that is in the client's trusted root CA store, then the ASA identity certificate does not need to be imported by the client.
That's why it's generally recommend to go the route of using a well-know public CA as they are alreay included in most modern browsers and thus the client doesn't need to know how to import certificates etc.
If you are using a local CA that is not in the client's trusted root CA store to issue your ASA identity certificate or self-signing certificates on the ASA then you need to take additional steps at the client.
In the first case, you would import the root CA certificate in the trusted root CA store of the client. After that, any certificates it has issued (i.e the ASA's identity certificate) would automatically be trusted by the client.
In the second case, the ASA's identity certificate itself would have be installed on the client since it (the ASA) is essentially acting as it's own root CA. I usually install them in my client's Trusted Root CA store but I guess that's technically not required, as long as the client knows to trust that certificate.

How I can set the Non-standard option of -Xmxn of jvm

Hi there,
Can any one tell me how I can set the Non-standard option of -Xmxn of jvm (setp by step).Iam using Sun's jvm(jdk1.2.2).Iam facing a error(java.lang .OutOfMemory).I want to set the maximum size of the memory allocation pool.Any help will be highly appreciated.
Thanks for ur valuable Time
Bikash

you can use the following sample options to specify memory size.
EX:java -Xms128mb -Xmx512mb myClassFile

Non-standard keys

Hi,
How can I respond to input from non-standard keys, like the forward and back keys on some keyboards? I've tried using the KeyEventDemo, but it doesn't record any events. Any ideas?
Thanks.

Try this:
KeyboardFocusManager.getCurrentKeyboardFocusManager().addKeyEventDispatcher(
        new KeyEventDispatcher() {
            public boolean dispatchKeyEvent(KeyEvent e) {
                System.out.println(e.getKeyCode());
                return false;
});It will detect all keyevents and print the correpsonding keycode. If this code does not react when you press those arrow keys, then you cannot detect them using pure java.

Non-standard fonts in JOptionPane

I have looked extensively through this forum, and no one has answered this specific question, even though it has been asked several different ways. Maybe someone has an answer now.
I am writing a client app using Java 1.4.2_02 that needs to display many languages. I have all of the European languages displaying correctly in JFileChooser and JOptionPane. I even have the Asian languages displaying correctly in JFileChooser. What I can't do is display the Asian languages (and probably any non-standard font) in JOptionPane correctly - all I see are boxes in place of the characters. Here is the relevant code of what I have tried so far:
        Locale.setDefault(Locale.JAPAN);
        int option = JOptionPane.YES_NO_OPTION;
        String [] buttonText = null;
        switch(option) {
            case JOptionPane.YES_NO_OPTION:
                buttonText = new String[2];
                buttonText[0] = UIManager.getString("OptionPane.yesButtonText");
                buttonText[1] = UIManager.getString("OptionPane.noButtonText");
                break;
            // other cases...
        JOptionPane jop = new JOptionPane("Do you wish to display Japanese fonts?",
                                          JOptionPane.ERROR_MESSAGE,
                                          option,
                                          null,
                                          buttonText);
        // Have tried many fonts - MS Gothic seems to be the one that should work, though.
        // BOLD seems to slightly work - I see a (Y) or a (N) after the strange characters.
        jop.setFont(new Font("MS Gothic", Font.BOLD, jop.getFont().getSize()));
        JDialog jopDialog = jop.createDialog(null, "Dialog Title");
        jopDialog.show();Even though most of the above code is from a post by one of the authors of "Java Internationalization", this doesn't work. Has anyone solved this problem?

To solve this problem, you have to tell the UIManager to set the font everywhere you need the new font. Unforunately, there is no one method call to do this. So here is the short version:
        localizedFont = new Font("MingLiU", Font.PLAIN, 12); // or whatever font you need
        UIManager.put("ToolTip.font", localizedFont);
        UIManager.put("OptionPane.font", localizedFont);
        UIManager.put("Button.font", localizedFont);
        // etc...    Another thread (I forget where) gave code to extract all of the properties of UIManager - find that thread to get all the properties.

Http probe on non-standard tcp port 8021

I've configured http probe on standard port 80 with no issue. I'm now trying http probe on non-standard tcp port 8021, confirmed with packet capture to confirm that the CSM is indeed probing, status code 403 is returned but the reals are showing "probe failed". Am I missing something? Thank you in advance.
CSM v2.3(3)2
probe 8021 http
request method head
interval 2
retries 2
failed 4
port 8021
serverfarm TEST
nat server
no nat client
real 10.1.2.101
inservice
real 10.1.2.102
inservice
probe 8021
vserver TEST
virtual 10.1.2.100 tcp 8021
serverfarm TEST
replicate csrp connection
persistent rebalance
inservice
VIP and real status:
vserver type prot virtual vlan state conns
Q_MAS_8021 SLB TCP 10.1.2.100/32:8021 ALL OUTOFSERVICE 0
real server farm weight state conns/hits
10.1.2.101 TEST 8 PROBE_FAILED 0
10.1.2.102 TEST 8 PROBE_FAILED 0

you need to specify what HTTP response code you expect.
The command is :
gdufour-cat6k-2(config-slb-probe-http)#expect status ?
<0-999> expected status - minimum value in a range
The default is to expect only 200.
This is why your 403 is not accepted.
Gilles.

CSS 11501 ftp server setup problem using non-standard port

Dear Expert,
we would like to setup FTP server over CSS where our member sever use non-std-port to open both control/data channel (i.e. 6370 as ctrl and 6369 as data this case.) but seems we only get Passive mode FTP mode work only but not for Active mode FTP case for data channel establishement for server back to client...is there any professional advise can help on this case...? here is our setup info FYI
# sh ver
Version:               sg0820501 (08.20.5.01)
Flash (Locked):        08.10.1.06
Flash (Operational):   08.20.5.01
Type:                  PRIMARY
Licensed Cmd Set(s):   Standard Feature Set
                       Secure Management
CVDM Version:          cvdm-css-1.0_K9
!*************** Global
ftp data-channel-timeout 10
ftp non-standard-ports
!************************** SERVICE **************************
service ftp_ftpgtw
keepalive maxfailure 2
keepalive frequency 15
keepalive retryperiod 2
keepalive type tcp
ip address 192.168.52.170
protocol tcp
keepalive port 6370
port 6370
active
# sh run group drfusegtwftp_grp
!*************************** GROUP ***************************
group gtwftp_grp
vip address 192.168.52.28
add service ftp_ftpgtw
active
content ftp_gtwpkg-ftpgtw
    add service ftp_ftpgtw
    vip address 192.168.52.28
    port 21
    protocol tcp
    application ftp-control
    active

Thanks for your confirmation on no prob found in config level 1st..:P..as to save us a lot of time in isolating problem at this level.
What we can notice is seems the data port connection is fail to open for server back to client....for our general sense..... the flow expected should be:
TCP session A -- Client:1234 --> VIP:21 --> member svr:6370
TCP session B -- Client: 5678 <--> VIP:20 <--> member Svr: 6379 [on demand generated between server/client]
but we can only see session B fail to setup when client side access VIP site on CSS..even we try to put the most standard case as below
TCP session A -- Client:1234 --> VIP:21 --> member svr:21
TCP session B -- Client: 5678 <--> VIP:20 <--> member Svr: 20
we still unable to make the Active mode FTP access work either...hence we got no idea on how CSS handle FTP access when it involve services over multiple tcp ports..
and from CSS xlate view...the problem is we can only see what NAT IP that used in CSS connect to client...but no way to confirm for which port for VIP using outgoing to client. neither it is dropped by CSS..nor it is never setup from VIP to Client side.

"non-standard" characteers

Similar Messages

Maybe you are looking for