Non-standard HTTP methods in Servlet 2.4

Hi,
I have application Servlet 2.3 compatible and I want to migrate it to the Servlet 2.4 specification, but I faced a problem with non-standard HTTP-methods that my application uses (WebDAV HTTP methods).
In the web-app_2_4.xsd there are only seven valid HTTP methods and my xml editor cannot validate web.xml because of the non-standard HTTP methods.
Can someone help me to solve this issue?
Regards,
@n@stell_

Hi,
if you have an empty <http-method> element then all methods are constrained. Does this help?
Matthew

Similar Messages

Non-Standard HTTP Ports

We have a non-Windows server running Cold Fusion and two
separate websites. One uses a the standard HTTP port, the other one
uses a different port. How do you get Cold Fusion to recognize the
second port in addition to the first port?

Hi,
It inserts this header in HTTP which normally listens on 80. Even though HTTP is listening on any different port, we should be able to insert the header. This should work fine.
Regards,
Kanwal
Note: Please mark answers if they are helpful.

Kvirc from SVN {NON-Standard-Install-Method} and Overcoming 2 Problems

Hello, everyone. Firefishe here.
There are certain programs I like to compile from source code, outside of the normal arch hierarchy of PKGBUILD's. One such program is the Internet Relay Chat client, "KVIRC".
I've been using kvirc for years, and I like to keep it as up-to-date as possible, just like Arch!
This is why I like to use the svn version, so I can update it quickly and uniformly. I like--as a user--to contribute back to the project. (I had one of my bug reports translated into an instant commit by the main project author, himself, once. That made me feel quite good, so it really does help to do a few things like this now and again.
Okay, on to the main topic.
I'm writing this to alleviate a nagging problem that had been plaguing me for months in 2013. Qt5 just wasn't compiling kvirc very well back then. The fact is, the echoing strains of "qt5 is broken in kvirc" from the #kvirc channel on Freenode, resounded soundly throughout that entire year. Qt5 was still a bit buggy, and not all the libraries (32bit or 64bit) were quite finished.
Move forward to (now) July, 2014! I have now compiled kvirc successfully on my 64bit (with 32bit multilib installation) laptop, and kvirc is purring away with a current svn build of kvirc.
However, I ran into some issues, which I would like to share with you, below:
I usually go about compiling kvirc from svn like this: (I usually start from my /home/userNameHere directory.)
{arch@homedir}$ svn co https://svn.kvirc.de/svn/trunk/kvirc
{arch@homedir}$ cd kvirc
{arch@homedir}$ mkdir release
{arch@homedir}$ cd release
{arch@homedir}$ ccmake ..
[At this point, the 'ccmake ..' command invokes cmake-gui, an ncurses-like graphical user interface, with a list of menu items pertaining to various libraries and flags that can be set. cmake-gui makes selecting these flags and libraries quite easy, and also gives a clear indication of what directories may not have been found (which will be discussed a bit later.) ]
Press the 'C' Letter Key -- (This runs the Configure Routine. I sometimes do this twice, just to be sure it configured properly. I've had it miss a few times for unknown reasons.)
Press the 'G' Letter Key -- This 'Generates' Cmake files.
After the 'G' command, the system takes you back to the command prompt.
{arch@homedir}$ make ***WAIT A WHILE, COULD TAKE A BIT LONGER ON SLOWER SYSTEMS!***
{arch@homedir}$ sudo make install (Or 'su -' to root, then do 'make install'; your preference. I prefer using sudo.)
{arch@homedir}$ sudo ldconfig (Or 'ldconfig' if still at root prompt #)
{arch@homedir}$ kvirc (or 'kvirc &' if you don't want the terminal window to hold onto the process.)
Kvirc should run at this point, but I ran into a couple of problems. Once during the ccmake configuration (which prevented ccmake from configuring), and at the end, which prevented kvirc from running.)
The first had to do with two (2) packages that were not installed. The were, as follows:
qt5-webkit
qt5-multimedia
I installed those files, then did the 'ccmake ..' portion. That ran fine, as well as the 'make' and 'sudo make install' and 'sudo ldconfig' parts.
What didn't work was when I tried to run kvirc. I got the following error:
{arch@homedirc}$ kvirc
kvirc: error while loading shared libraries: libkvilib.so.4: cannot open shared object file: No such file or directory
I remember, back when kvirc was wanting Qt4, and not Qt5, that if I didn't do the first 'sudo ldconfig' command before trying to run kvirc, it would give something similar. However, since this compile run was wanting Qt5, and not qt4, I was puzzled.
Well, it turned out to be something quite simple. This is a non-standard process of software installation on a new(er) arch system. The 'uname -r' command on my system yields the following: 3.15.4-1-ARCH . It is no surprise, then, that at this late date, Qt5 is complete (or at least more complete) than back in 2013 when I had the original problems, and had to select the 'WANTS-QT4' section during the 'ccmake ..' command.
**** Building kvirc this way places the kvirc binary in /usr/local/bin, and a certain 'libkvilib.so.4' library in /usr/local/lib ****.
This is to be expected from a standard source compile on most gnu/linux systems; and this *is* a standard compile, even though we're using the 'ccmake ..' command to do the preliminary configuration and cmakefile generation.)
The problem is, is that Arch is looking for libkvilib.so.4 in /usr/lib, and not /usr/local/lib. So the following was, for me, the solution that got everything squared away:
I made a symlink in /usr/lib to /usr/local/lib/libkvilib.so.4, like this:
{arch@homedir}$ cd /usr/lib
{arch@homedir}$ sudo ln -s /usr/local/lib/libkvilib.so.4 libkvilib.so.4
After doing this, I did:
{arch@homedir}$ kvirc (or kvirc &)
And It Ran Beautifully! :-)
I hope you've enjoyed this HOWTO. I know most people may just want to use the 4.2.x version of kvirc, currently residing safely in the standard repositories. However, if you're like me, and want a bit of bleeding edge, Qt5 goodness with kvirc, I might suggest doing the above!
I can be reached at firefishe At gmail DOT com if anyone has any questions.
Last edited by Firefishe (2014-07-11 09:23:20)

Hi Dareen,
Looking at the information shared and also the error message ( Update Failed,Updates could not be applied.Please contact your Administrator if you wish to apply updates on your machine. Updates have been suppressed by the Administrator.If the problems persist, contact customer support for further assistance" ),
It suggests that the updates were to be managed by the Admin only. Lets try the following step and suggest if this was able to resolve the concern that you have or not.
1) Navigate to C:\Program Files (x86)\Common Files\Adobe\AAMUpdaterInventory\1.0 and you will find a .dat file ( AdobeUpdaterAdminPrefs.dat).
2) Please open the file in question and you will find a line item : <Suppressed>1</Suppressed> .
3) Please change the Value from 1 to 0 and save the file back in the same location.
post the above step, try the installation once again and share the end result please.
Cheers,
Kartikay Sharma

ACE30/4710 - will x-forwarded-for work for non standard HTTP Ports?

Can I use x-forwarded-for on an ACE30 or ACE4710 to pass source IP details if my web service isn't using Port 80 or 443? Will it work satisfactorily for HTTP running on other ports (e.g. Port 8080)?

Hi,
It inserts this header in HTTP which normally listens on 80. Even though HTTP is listening on any different port, we should be able to insert the header. This should work fine.
Regards,
Kanwal
Note: Please mark answers if they are helpful.

JRE ignores proxy setting for connections to non-standard web ports

Hi,
I've noticed that JRE would not use the proxy settings if the application tries to connect to a web address on a non standard http port. If port 80, 443, 8080 etc is used, the proxy is used but if it's something like 32938 it's not. Is there anyway to disable this behaviour and just have the proxy used for all HTTP traffic, regardless of destination port. Below a trace snippet that shows the behaviour.
guistyle/1049 (signed jarfile)
Browser Java version 1.7.0_67
in Explorer 5 +
on NT-based Windows
network: Connecting https://www.123.com/guistyle/*JEMSEC11424340585918 with proxy=HTTP @ /10.10.12.11:3128
Using port: 43856
network: Connecting http://www.123.com:43856/ with proxy=DIRECT
Socket connection failed: java.net.ConnectException: Connection timed out: connect
Attempting tunneled connection
network: Connecting http://www.123.com:80/*TGD=CS/*EVENT=*JEMTUNNEL/1353036962/response.txt with proxy=HTTP @ /10.10.12.11:3128
TNLRCV unknown block start=null
network: Connecting http://www.123.com:80/*TGD=CS/*EVENT=*JEMTUNNEL/1353036962/response.txt with proxy=HTTP @ /10.10.12.11:3128
network: Connecting http://www.123.com:80/*TGD=CS/*EVENT=*JEMTUNNEL/1353036962/response.txt with proxy=HTTP @ /10.10.12.11:3128
TNLRCV unknown block start=null
Receive failed
Unable to make TCP/IP connection
End guistyle (startup failed)
basic: Applet initialized
basic: Starting applet
basic: completed perf rollup
basic: Applet made visible
basic: Applet started
basic: Told clients applet is started

Hi,
I still get the same error:
[12/Nov/2007:14:34:50] failure (16473) rsdts.mycomp.com: for host i78473.mycomp.com trying to GET http:/lidip/, service-http reports: HTTP7765: error reading response header (Server closed connection)
And:
Bad Gateway
Processing of this request was delegated to a server that is not functioning properly.
I don't get any logs on the other side...

Calling non standard servlet methods

How can we call the non standard servlet methods like OPTIONS, HEAD, TRACE, etc.? Like to call the GET method of the servlet located on server xyz from some HTML page, we write the HTML form as follows :
<form name="frmname" action="http://xyz.com/servlet/MyServlet" "method=get">
So what should we write to call the other methods?
Ankit.

You can't do it directly from HTML, you need to open a connection over HTTP and then send the appropriate HTTP request. Not all web servers support these methods.

Http probe on non-standard tcp port 8021

I've configured http probe on standard port 80 with no issue. I'm now trying http probe on non-standard tcp port 8021, confirmed with packet capture to confirm that the CSM is indeed probing, status code 403 is returned but the reals are showing "probe failed". Am I missing something? Thank you in advance.
CSM v2.3(3)2
probe 8021 http
request method head
interval 2
retries 2
failed 4
port 8021
serverfarm TEST
nat server
no nat client
real 10.1.2.101
inservice
real 10.1.2.102
inservice
probe 8021
vserver TEST
virtual 10.1.2.100 tcp 8021
serverfarm TEST
replicate csrp connection
persistent rebalance
inservice
VIP and real status:
vserver type prot virtual vlan state conns
Q_MAS_8021 SLB TCP 10.1.2.100/32:8021 ALL OUTOFSERVICE 0
real server farm weight state conns/hits
10.1.2.101 TEST 8 PROBE_FAILED 0
10.1.2.102 TEST 8 PROBE_FAILED 0

you need to specify what HTTP response code you expect.
The command is :
gdufour-cat6k-2(config-slb-probe-http)#expect status ?
<0-999> expected status - minimum value in a range
The default is to expect only 200.
This is why your 403 is not accepted.
Gilles.

Version 8 blocks http on non standard ports i.e. 8080

Version 7 handled http on both port 8080,8081 and 8082 but only text is passed after version 8 update. Is there a way to re-enable http on non standard ports? If you save the text file to the desktop and load it from there the html is processed correctly? Is there a directive besides "html" that could be place on the web pages to force html rendering on the odd ports. Version 8 works with port 4135 from Jefferson labs speed test.

See:
*http://www.mozilla.org/projects/netlib/PortBanning.html
*http://kb.mozillazine.org/network.security.ports.banned.override

Using the CSM to setup a HTTPS session on non-standard ports?

Hi Guys,
One of our clients wants to setup an SSL connection on a non-standard SSL port i.e. 4444 to begin with. Here the sever handles the SSL encryption / deccryption) instead of the SSL module.
I've found the following config to work well:
serverfarm FARM-MOBS-4444
nat server
no nat client
predictor leastconns
failaction purge
real 130.194.12.81 4444
inservice
real 130.194.12.84 4444
inservice
probe MOBS-4444
sticky 108 netmask 255.255.255.255 timeout 60
vserver VMOBS-PROD-4444
virtual 130.194.11.51 tcp https
serverfarm FARM-MOBS-4444
sticky 60 group 108
persistent rebalance
inservice
With the above setup the CSM redirects the SSL connections (recieved on 443) to port 4444 on the sever and maintains this for the duration of the session.
While the above setup works, is it possible to configure the VIP to use a HTTPS port other than 443 (which is default)? This would then allow for separate HTTPS paths to be setup on non-standard ports. I ask this since the client also wants to setup a HTTPS path on port 4443 as well.
Any ideas would be useful.
thanks
Sheldon

Hi Martin,
Do you mean using the SSL module to perform the encryption / decryption? If so i've tried this and it does work without an issue.
I was just wondering if it were possible to have a VIP setup where the HTTPS port is not 443 but say 4443, where the encryption / decryption is done by the real servers themselves.
thanks
Sheldon

How To: Use FCPX to create iPhone Portrait Movies (and other non-standard formats)

Goal: Use Final Cut Pro X 10.0.7 to produce a 640x1136 video (iPhone 5 Portrait). You can use these same steps to produce virtually any dimensions you want. My example is for the iPhone 5, in Portrait mode.
This information is available in various places, but you have to realy work to find it, so I thought I'd post a step-by-step guide here.
By the way, you might think you could just create a FCPX Project with your desired dimensions, but you can't (at least with 10.0.7). Projects only support certainly dimensions. But there are other ways, as the rest of this post describes:
1) Create an initial movie with the desired dimensions, to serve as a template. We'll call it "Template.mov". The only thing that matters is the dimensions. It can be in any codec FCPX understands, and virtually any length.
I'm using a 2 second video shot on my iPhone for the template. You could also create a blank image (.png, whatever) with the proper dimensions, copy and paste it into a new Quick Time Pro 7 window, and Export it using custom settings. There's lots of different ways to do this.
2) Drop Template.mov into a FCPX event.
3) Select Template.mov in the Event browser, and select File->Duplicate (or command-D). You probably could just edit "Template.mov", but it's a good idea to save it for reuse.
3) Change the name of the copied video. I'm using "iPhone Video".
4) Right-click "iPhone Video" and select "Open in Timeline".
5) If you made the Template video from a still image, you may need to change the duration (ctrl+D). You don't have to make it very long, but it needs to be longer than 1 frame. A few seconds should be enough.
6) Use this timeline like you'd use a project's timeline. Drop in new content, trim, transition, etc. There may be things you can't do in it, but I haven't found any yet. I'm guessing Chapters may not work, but I haven't tried them.
7) Note that when you drop new content into the timeline, it may size funny. That's because the default setting for "Spacial Conform" is "Fit". Simply select the newly-dropped content, and in the Video settings inspector, scroll down to "Spacial Conform" and change it. You could use "Fill", which fills the frame vertically, or "None", which uses the source's original height. Then crop/transform/whatever to get what you want.
8) When you're ready to render, select "iPhone Video" in the Event browser, then use the "Share" button. You want to use the "Export File" destination, which you may have to add. Pick your codec, and let 'er rip.
9) When the rendering is done, you should have a video in your desired dimensions.
That's all there is to it. Hope this helps someone.
Dan
PS: Don't ask why someone would want to create an iPod video using FCPX. The point is that you may need to create a video with non-standard dimensions at some point in time, and this is how to do it.
PPS: Most of this information came from http://library.creativecow.net/articles/payton_t/FCPX_Custom-Resolution-Timeline s/video-tutorial. I just wrote it down, while I tried to do what the video suggested.

Instructions for using QuickTime Pro 7 to create a template video with unusual dimensions.
I suspect that anyone savy enough to be using FCPX has probably already figured out how to do this, either using my technique or another, so there probably isn't a real need for me to post this. For that matter, I may be the only person who cares about this at all. However, while I was trying to learn how to do all of this, I would have really appreciated having all the information in one place, so here goes.
If you want to create a video with unusual dimensions (like 640x1136) using my steps above, you'll need a "template" video first. Here's an easy way to create one, using any image editor, and QuickTime Pro 7.
1) Open QuickTime Pro 7 (QTP for short).
2) From the menu, select File->New Player. You'll get a window with just the bottom portion of the player, i.e. the playback controls.
3) Using an image editor, create a still image in the desired dimensions. You can use any image editor. It doesn't matter what the image contains (although it will end up showing as a thumbnail in FCPX).
4) Copy the image to the clipboard.
5) Switch back to QTP, and paste the image into the new player. Don't worry that there isn't a video window showing - just paste it into the window that has only playback controls. As soon as you do, the video window appears.
6) Advance to the end of the movie (the short, 1-frame movie), then hold down Command+V (paste) and keep holding it down to paste multiple images in. Watch the time advance. You could, if you want, just hold down Command+V until you get the length you want. But if you want a long video, there's an easier way:
7) When you reach a few seconds (or whatever duration your patience allows), select all (Command+A) and copy (Command+C). Then hold down Command+V to keep pasting in the longer clips. Wait until you reach a longer duration, then repeat the process. So, for example, 1 second, then 10 seconds, then 1 minute, then 10 minutes, then 1 hour. Or whatever you want.
8) Save the video however you want. I usually use File->Export with H.264, with Quality set to "Least". Just make sure you don't let it change the dimensions. If you resized the player window, depending on which "save" or "export" method you've chosen, it might default to the resized dimensions, so double check that to make sure.
That's it. You now have a template video you can use with my previous post(s).
Dan

Protecting Apache URLs ending in '/' with non-standard DirectoryIndex

I'm using Apache agent 2.2 for Acces Manager 7. My Apache version is 1.3.33. I have a DirectoryIndex line in my httpd.conf like so:
DirectoryIndex index.cgi index.html
So when I request the URL <http://server.edu/subdir/> I should get <http://server.edu/subdir/index.cgi>.
My problem is when URLs like this are protected by Access Manager. I have an inverted notenforced_list, which contains http://server.edu/subdir*. So only stuff in subdir should be controlled by AM. I want all 3 of these URLs to give the same results:
http://server.edu/subdir
http://server.edu/subdir/
http://server.edu/subdir/index.cgi
The first and third URLs work as expected; the second one (with a trailing '/') doesn't work. If I change my notenforced_list to read http://server.edu/subdir/*, then only the third (complete) URL works.
By looking at the agent logs in debug mode, it appears that AM is first looking at policy for http://server.edu/. That test passes, since that URL is part of the (inverted) notenforced_list.
Then the agent goes on to check the /subdir URL -- but it tacks on index.html:
2006-04-20 14:06:58.144 Debug 10883:252998 PolicyAgent: get_request_url(): Returning request URL http://server.edu/subdir/index.html.
Then it goes on to say that it will enforce policy on this URL, which is correct, but it's referring to index.html, not index.cgi. I'm never prompted for authentication, I just get a browser error that says the page cannot be displayed. If I ask explicitly for http://server.edu/subdir/index.cgi, everything works as expected -- I'm redirected to the AM server and prompted to authenticate, then redirected back to the URL I originally requested.
Am I missing something here? Has anyone else tried to protect URLs ending in '/' with a non-standard name?

Here is the log extract. You can see pretty clearly that it just tacks on 'index.html' to the end of the original URL, when it gets to the 2nd phase of the policy evaluation (after checking for root-level policy). Thanks for taking a look!
2006-04-20 14:06:58.141MaxDebug 10883:252998 PolicyAgent: get_request_url(): Host: server.edu
2006-04-20 14:06:58.142MaxDebug 10883:252998 PolicyAgent: get_request_url(): Port is 443.
2006-04-20 14:06:58.142 Debug 10883:252998 PolicyAgent: get_request_url(): Returning request URL https://server.edu:443/subdir/.
2006-04-20 14:06:58.142 Warning 10883:252998 PolicyAgent: get_method_num(): Apache request method number did not match method string. Setting method number to match method string GET.
2006-04-20 14:06:58.142 Debug 10883:252998 PolicyAgent: am_web_is_access_allowed(): url 'https://server.edu:443/subdir/' path_info '/'.
2006-04-20 14:06:58.142MaxDebug 10883:252998 PolicyAgent: am_web_is_access_allowed(): processing url https://server.edu:443/.
2006-04-20 14:06:58.142MaxDebug 10883:252998 PolicyAgent: FqdnHandler::isValidFqdnResource() Resource => https://server.edu:443/, is valid => true
2006-04-20 14:06:58.142 Debug 10883:252998 PolicyAgent: am_web_is_access_allowed(): client_ip xxx.xxx.xxx.xxx not found in client ip not enforced list
2006-04-20 14:06:58.142MaxDebug 10883:252998 AM_POLICY_SERVICE: am_policy_compare_urls(): compare usePatterns=true returned 3
2006-04-20 14:06:58.142MaxDebug 10883:252998 AM_POLICY_SERVICE: am_policy_compare_urls(): compare usePatterns=true returned 3
2006-04-20 14:06:58.143MaxDebug 10883:252998 AM_POLICY_SERVICE: am_policy_compare_urls(): compare usePatterns=true returned 3
2006-04-20 14:06:58.143MaxDebug 10883:252998 AM_POLICY_SERVICE: am_policy_compare_urls(): compare usePatterns=true returned 3
2006-04-20 14:06:58.143MaxDebug 10883:252998 AM_POLICY_SERVICE: am_policy_compare_urls(): compare usePatterns=true returned 3
2006-04-20 14:06:58.143 Debug 10883:252998 PolicyAgent: in_not_enforced_list: not enforced list is reversed, only matches will be enforced.
2006-04-20 14:06:58.143 Debug 10883:252998 PolicyAgent: in_not_enforced_list: allowing access to https://server.edu:443/
2006-04-20 14:06:58.143 Debug 10883:252998 PolicyAgent: am_web_get_parameter_value(): Param Name = iPlanetDirectoryPro, & Param Value = NULL, status not found
2006-04-20 14:06:58.143 Debug 10883:252998 PolicyAgent: am_web_is_access_allowed(): remote user set to unauthenticated user (null)
2006-04-20 14:06:58.143 Info 10883:252998 PolicyAgent: am_web_is_access_allowed()(https://server.edu:443/, GET) returning status: success.
2006-04-20 14:06:58.143 Info 10883:252998 PolicyAgent: process_request(): Access check for URL https://server.edu:443/subdir/ returned success.
2006-04-20 14:06:58.143 Debug 10883:252998 PolicyAgent: set_user(): user set to
2006-04-20 14:06:58.143 Debug 10883:252998 PolicyAgent: am_web_is_logout_url(https://server.edu:443/subdir/): normalized URL https://server.edu:443/subdir/.
2006-04-20 14:06:58.143 Debug 10883:252998 PolicyAgent: set_user_attributes(): set user attributes option set to none.
2006-04-20 14:06:58.144 Debug 10883:252998 PolicyAgent: process_access_success(): returned AM_WEB_RESULT_OK.
2006-04-20 14:06:58.144 Debug 10883:252998 PolicyAgent: process_request(): returning web result AM_WEB_RESULT_OK, data []
2006-04-20 14:06:58.144 Debug 10883:252998 PolicyAgent: am_web_process_request(): Rendering web result AM_WEB_RESULT_OK
2006-04-20 14:06:58.144 Debug 10883:252998 PolicyAgent: am_web_process_request(): render result function returned AM_SUCCESS.
2006-04-20 14:06:58.144MaxDebug 10883:252998 PolicyAgent: get_request_url(): Host: server.edu
2006-04-20 14:06:58.144MaxDebug 10883:252998 PolicyAgent: get_request_url(): Port is 443.
2006-04-20 14:06:58.144 Debug 10883:252998 PolicyAgent: get_request_url(): Returning request URL https://server.edu:443/subdir/index.html.
2006-04-20 14:06:58.144 Warning 10883:252998 PolicyAgent: get_method_num(): Apache request method number did not match method string. Setting method number to match method string GET.
2006-04-20 14:06:58.144 Debug 10883:252998 PolicyAgent: am_web_is_access_allowed(): url 'https://server.edu:443/subdir/index.html' path_info ''.
2006-04-20 14:06:58.145MaxDebug 10883:252998 PolicyAgent: am_web_is_access_allowed(): processing url https://server.edu:443/subdir/index.html.
2006-04-20 14:06:58.145MaxDebug 10883:252998 PolicyAgent: FqdnHandler::isValidFqdnResource() Resource => https://server.edu:443/subdir/index.html, is valid => true
2006-04-20 14:06:58.145 Debug 10883:252998 PolicyAgent: am_web_is_access_allowed(): client_ip xxx.xxx.xxx.xxx not found in client ip not enforced list
2006-04-20 14:06:58.145MaxDebug 10883:252998 AM_POLICY_SERVICE: am_policy_compare_urls(): compare usePatterns=true returned 3
2006-04-20 14:06:58.145MaxDebug 10883:252998 AM_POLICY_SERVICE: am_policy_compare_urls(): compare usePatterns=true returned 3
2006-04-20 14:06:58.145MaxDebug 10883:252998 AM_POLICY_SERVICE: am_policy_compare_urls(): compare usePatterns=true returned 4
2006-04-20 14:06:58.145 Debug 10883:252998 PolicyAgent: in_not_enforced_list(https://server.edu:443/subdir/index.html): matched 'https://server.edu:443/subdir/*' entry in not-enforced list
2006-04-20 14:06:58.145 Debug 10883:252998 PolicyAgent: in_not_enforced_list: not enforced list is reversed, only matches will be enforced.
2006-04-20 14:06:58.145 Debug 10883:252998 PolicyAgent: in_not_enforced_list: enforcing access control for https://server.edu:443/subdir/index.html
2006-04-20 14:06:58.146 Debug 10883:252998 PolicyAgent: am_web_get_parameter_value(): Param Name = iPlanetDirectoryPro, & Param Value = NULL, status not found
2006-04-20 14:06:58.146 Debug 10883:252998 PolicyAgent: am_web_is_access_allowed()(https://server.edu:443/subdir/index.html,GET): no sso token, setting status to invalid session.
2006-04-20 14:06:58.146 Debug 10883:252998 PolicyAgent: am_web_is_access_allowed(): Successfully logged to remote server for GET action by user unknown user to resource https://server.edu:443/subdir/index.html.
2006-04-20 14:06:58.146 Info 10883:252998 PolicyAgent: am_web_is_access_allowed()(https://server.edu:443/subdir/index.html, GET) returning status: invalid session.
2006-04-20 14:06:58.146 Info 10883:252998 PolicyAgent: process_request(): Access check for URL https://server.edu:443/subdir/index.html returned invalid session.
2006-04-20 14:06:58.146MaxDebug 10883:252998 PolicyAgent: am_web_get_url_to_redirect(): goto URL is https://server.edu:443/subdir/index.html
2006-04-20 14:06:58.146MaxDebug 10883:252998 PolicyAgent: find_active_login_server(): Trying server: https://access-manager-server.edu:443/amserver/UI/Login
2006-04-20 14:06:58.149 Debug 10883:252998 PolicyAgent: process_access_redirect(): get redirect url returned AM_SUCCESS, redirect url [https://access-manager-server.edu:443/amserver/UI/Login?goto=https%3A%2F%2Fserver.edu%3A443%2Fsubdir%2Findex.html].
2006-04-20 14:06:58.149 Debug 10883:252998 PolicyAgent: process_access_redirect(): returning web result AM_WEB_RESULT_REDIRECT.
2006-04-20 14:06:58.149 Debug 10883:252998 PolicyAgent: process_request(): returning web result AM_WEB_RESULT_REDIRECT, data [https://access-manager-server.edu:443/amserver/UI/Login?goto=https%3A%2F%2Fserver.edu%3A443%2Fsubdir%2Findex.html]
2006-04-20 14:06:58.149 Debug 10883:252998 PolicyAgent: am_web_process_request(): Rendering web result AM_WEB_RESULT_REDIRECT
2006-04-20 14:06:58.150 Debug 10883:252998 PolicyAgent: am_web_process_request(): render result function returned AM_SUCCESS.

Reverse proxing on non-standard ports

Hi,
I want to create a new Reverse proxy mapping between an application and a GlassFish instance running on non standard port (not 80 / 443). Creating a mapping for HTTP works fine, but I can't find a way to map both the http and the https ports to the mapping.
I have an application SecurityTest running on instance
http://links.mycompany.com:38081/rsd/SecurityTest
https://links.mycompany.com:38182/rsd/SecurityTest
I want a mapping for the application
http://www.mycompany.com/rsd/SecurityTest/ -> http://links.mycompany.com:38081/rsd/SecurityTest
https://www.mycompany.com/rsd/SecurityTest/ -> https://links.mycompany.com:38182/rsd/SecurityTest
The application is more or less a hello world servlet that is secure (form login) so it switch from HTTP to HTTPS when not logged in to ask for the username / password. Mapping to the http port works for the public page, the redirect gives an error:
Gateway Timeout
Processing of this request was delegated to a server that is not functioning properly.
Can anyone tell me how to configure the Web Server to make it work?
thanks

Hi,
I still get the same error:
[12/Nov/2007:14:34:50] failure (16473) rsdts.mycomp.com: for host i78473.mycomp.com trying to GET http:/lidip/, service-http reports: HTTP7765: error reading response header (Server closed connection)
And:
Bad Gateway
Processing of this request was delegated to a server that is not functioning properly.
I don't get any logs on the other side...

G5 Second Display using the GeForce FX 5200 - Non-Standard

I have a Dual 1.8 GHz PowerPC G5 Macintosh.
The display adapter installed is as follows:
GeForce FX 5200:
Chipset Model: GeForce FX 5200
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 64 MB
Vendor: nVIDIA (0x10de)
Device ID: 0x0321
Revision ID: 0x00a2
ROM Revision: 2060
Displays:
VX2235wm-3:
Resolution: 1680 x 1050 @ 60 Hz
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Display:
Status: No display connected
I want to attach a second display to my machine, but the second plug on the card is a non-standard DVI-type connector. It looks like this:
x x x x x x x x x x X X
x x x x x x x x x x -----
x x x x x x x x x x X X
...with 10 rows of 3 as opposed to 8.
I have had trouble finding an adapter to use to convert this to VGA (which is what I meed to connect my second monitor). I've searched the Apple Store online to no avail, as well as Google. Perhaps I've had no luck because I don't know the name of this part.
Any help is much appreciated!
~Rob Blaze

Hello! Does the port look like the one below? If so you'll need an adapter. Tom
Actually, HERE is the page i was looking for that shows and describes all dvi connections.
Apple ADC Connector
[IMG]http://img300.imageshack.us/img300/9497/appleadcconnectorve2.jpg[/IMG]
Message was edited by: Thomas Bryant

Is it possible to load a non-standard image using some Java API?

Hi,
My "problem" is:
1. I have an image called "mediterranean_sea.IMG" (non-standard image format)
2. I need to process it (histogram, palette, etc).
3. I'm wondering if it is possible to load this image an process it using some Java API.
4. I've tried to do this using JAI but I think that this API only works with TIFF, PNG, JPEG, etc.
Any idea?
Thanks in advance,
Roger

[url http://forum.java.sun.com/thread.jsp?thread=468188&forum=31]Cross-post

Non-standard fonts in JOptionPane

I have looked extensively through this forum, and no one has answered this specific question, even though it has been asked several different ways. Maybe someone has an answer now.
I am writing a client app using Java 1.4.2_02 that needs to display many languages. I have all of the European languages displaying correctly in JFileChooser and JOptionPane. I even have the Asian languages displaying correctly in JFileChooser. What I can't do is display the Asian languages (and probably any non-standard font) in JOptionPane correctly - all I see are boxes in place of the characters. Here is the relevant code of what I have tried so far:
        Locale.setDefault(Locale.JAPAN);
        int option = JOptionPane.YES_NO_OPTION;
        String [] buttonText = null;
        switch(option) {
            case JOptionPane.YES_NO_OPTION:
                buttonText = new String[2];
                buttonText[0] = UIManager.getString("OptionPane.yesButtonText");
                buttonText[1] = UIManager.getString("OptionPane.noButtonText");
                break;
            // other cases...
        JOptionPane jop = new JOptionPane("Do you wish to display Japanese fonts?",
                                          JOptionPane.ERROR_MESSAGE,
                                          option,
                                          null,
                                          buttonText);
        // Have tried many fonts - MS Gothic seems to be the one that should work, though.
        // BOLD seems to slightly work - I see a (Y) or a (N) after the strange characters.
        jop.setFont(new Font("MS Gothic", Font.BOLD, jop.getFont().getSize()));
        JDialog jopDialog = jop.createDialog(null, "Dialog Title");
        jopDialog.show();Even though most of the above code is from a post by one of the authors of "Java Internationalization", this doesn't work. Has anyone solved this problem?

To solve this problem, you have to tell the UIManager to set the font everywhere you need the new font. Unforunately, there is no one method call to do this. So here is the short version:
        localizedFont = new Font("MingLiU", Font.PLAIN, 12); // or whatever font you need
        UIManager.put("ToolTip.font", localizedFont);
        UIManager.put("OptionPane.font", localizedFont);
        UIManager.put("Button.font", localizedFont);
        // etc...    Another thread (I forget where) gave code to extract all of the properties of UIManager - find that thread to get all the properties.

Non-standard HTTP methods in Servlet 2.4

Similar Messages

Maybe you are looking for