Non Stock Materials

Hi,
I'm wondering if someone can help?
We have a need to created materials for service products such as Installation, Commissioning, Training etc.
Is there a way of setting up these products as non-stocked, non-deliverable items so that they won't appear as demand on our factory. I also need to make sure these products are excluded from any discount pricing.
Thanks for your help.
Mike

Mike,
You may create the material master with material type as DIEN service, make sure the item category group as LEIS. If the item category group as LEIS, system will propose item categy as TAD based on the item categroy determination in customising. It should propose CD as schedule line, there will not be any requirement generated, no delivery ...etc.
You may control the billing and pricing relevency through the customisaton of the item category TAD.
Prase

Similar Messages

  • Create auotmatic purchase order for non stock materials

    Hi,
    Please provide me information on how to create automtaic purchase order for non stock materials in MM system.
    Regards

    Hi,
    For automatic PO creation follow the steps.
    1) Material Master purchasing view tick automatic PO check box  (Material type NLAG)
    2) Vendor Master purchasing view tick automatic PO check box.
    3) Maintain Source list for Vendor & Material.
    4) Maintain Purchase Info Record.
    5) Create a Purchase Requisition.
    6) Use T.Code: ME59N & execute for PR for vendor, you will be able to create automatic PO.
    Note
    Ensure that Purchase Info Record should be there.
    If you have more than one vendor then fixes only one vendor in source list.
    During PR creation select source determination check box.
    SAM

  • Non Valuated & Non Stock Materials

    Hi Freinds,
    I have a query. Give me few examples for non valuated & non stock materials.
    Thanks & Regards
    Saeed Arif

    hi,
    Non-stock : Materials ready for use/Consumption and available anytime  Ex: Electricity,Water etc..,.
    Non-valuated : Nonvaluated materials are managed on a quantity basis, but not by value.
    Ex: Plastic bags in retail malls
    hope this gives you a clear view of difference between Non-stock and Non-valuated
    Regards
    KKY

  • Purchase Non Stock Materials for Project

    Hi All,
    How i can create a PR for Non stock materials like Office stationeries for Project ?
    regds,
    CB

    if you do not use networks or want to raise PR sepertely i.e. not vai network then go to transaction ME51N and use acc asssgn cat P
    then account assign the WBS to the requisition

  • Prevent Hourly Employees from Ordering Non-stocked Materials and Creating Purchase Reqs in Work Order

    Our SAP plant maintenance system is configured to create a purchase req when a non-stocked material is ordered. We would like to prevent hourly employees from creating a purchase req or ordering non-stocked materials. Only supervisors should be able to order non-stocked materials and create a purchase req. Is there a way to do this via config or system enhancement?

    Hello Rick,
    Clearly there will be 2 ways if not more. One is the Authorization object route and another is Enhancement route. I'm not going to touch the former one. So let's expect answers from other members for that. For the later one, we need to know the answer for the question below:
    'Can we distinguish the hourly employees from regular employees by the user-Id or some other means? If yes, how ?'
    Once we know this, we need to use some user-exit or enhancement spot of the program SAPLCOIH to capture the event of 'N' in the ItemCategory field of Components tab by such UserIds and trigger an error message.  (Suitable user-exit is not striking my mind, so this might go the implicit enhancement way of Order program SAPLCOIH ).
    KJogeswaraRao

  • GR and QI of non stock materials

    Dear All,
    Scenario is as following:
    client wants to do the GR of that materials whose demand suddenly raises and this material is non stock and has no material master in sap. how can we do its GR and quality insp.

    Hi Shoaib,
    Material master create is must if you want to include in SAP System.
    Regards
    SANIL

  • Excise invoice issue for non stock orders

    Hi,
    We are unable to create excise invoice for non stock materials. When we try to create excise invoice with refernce to the billing document, the following error appears (message no 81681: reference document of 2917 is not delivery document). This process was working properly before updating patches, but after the updation, we are not able to generate excise invoice for non stock materials. (FYI: In the case of non stock order we are using order related billing). Any solution to resolve this error??
    regards
    John
    Edited by: Gino12 on Oct 28, 2010 10:00 AM

    For sales with material type NLAG, Item category TAX and schedule line category CX contain the standard settings along with copy control settings (VTFL, item level requirement 004) that suit your case.

  • In case of Non Stock Material - Different GL for projects from WRX

    Hi Gurus,
    While doing MIGO for non stock material in case of projects, system is crediting account from WRX in OBYC with blank valuation class. but how can we give different GL for projects in this case.
    Please revert asap.
    Thank you

    >
    sapmm99 wrote:
    > For non valuated material, material  master is required or?
    >
    > As per my knowledge material master is mandatory only for stock materials. not for not valuated and non stock materials usually we never maintain master data for non stock and non valuated materials
    >
    > if i am wrong please advise me
    Its upto you if you want maintain material master record or not for non valuated material. With material master you have a material code to input in the field of PO, without material master you put in short text.

  • During creation of NON stock material PO from where system will pick price

    Hello All,
    While creating PO for non stock material from where system will pick the price?
    If info record is there from where it will pick, if info record is not there then from where it will pick like that...
    If existing PO is there or not
    if existing contract is there or not
    For non stock material should we maintain the material master or ?
    Please advise me
    Thanks in advance

    >
    sapmm99 wrote:
    > For non valuated material, material  master is required or?
    >
    > As per my knowledge material master is mandatory only for stock materials. not for not valuated and non stock materials usually we never maintain master data for non stock and non valuated materials
    >
    > if i am wrong please advise me
    Its upto you if you want maintain material master record or not for non valuated material. With material master you have a material code to input in the field of PO, without material master you put in short text.

  • Automatic PR for non-stock BOM component for Subcontract PO

    Dear Guru,
    Can you any master please advice me on below question?
    We have a subcontract PO with the BOM component of non-stock, can i know if there is possible for those non-stock BOM component to generate a Purchase Requisition automatically, any existing configuration that we can do?
    Thank you very much,
    Regards
    Chee Wee

    Hi,
    You can use Material Type "NLAG" for Non-stock materials.
    Non stock materials cannot be stored, right, hence the name non-stock.
    Non-stock material includes materials that are not managed on an inventory basis (for example, small parts such as nails) though physically in stock.
    You can create a BOM which contains an NLAG item or directly use in Production order also.
    item Category "N" So system will create the purchase requisition when there is requirement.
    We receive the non stock material using movement type 101. upon receiving the material will be consumed.
    Please refer link below for better understanding.
    BOM explosion in MRP for non-stock material
    What  is use of  Item Category N(non-stock item) in BOM creation
    Believe this could help your queries. TQ
    rgds,
    nanthakumar

  • Serial number for non stock material

    Hello,
    I would like to create a serial number for a non stock material  (material type NLAG) (PO with account assignment catergory K) and I receive the following error message during the goods receipt (transaction MIGO) :
    *Movement type 101 does not currently support serial number management*
    *Message no. IO306*
    *Diagnosis*
    **With the help of * under the business operation, the entry in table T156S used here under movement type 101 defines that no serial numbers are supported here.**
    *System Response*
    *Termination of the transaction called up.*
    Is there somebody who can help me with this problem please ?
    Thanks a lot in advance for your help.
    Kind regards,

    Hi,
    I'm not familiar with Serial Number Management but I guess you can apply it only to materials with stock.
    http://help.sap.com/saphelp_47x200/helpdata/en/dd/f8c814b3f911d1896e0000e8284931/frameset.htm
    (no non-stock materials are mentioned...)
    BR
    Csaba

  • Auto G/L population for Non Stock Items

    Hi,
    I am trying to configure the Auto G/L Population for Non stock item (Material Master item).I have created the Material without Valuation class assignment.
    Master data:
    Material 1(Material type : Non Stock,No valuation class assignment,attached with Material Group X)
    Material group X is attached with Valuation class (Entry aid for items without material master)
    In OBYC -->Transaction GBB with modifier VBR maintained the G/L for the relevant valuation class.
    I am expecting to default that G/L in Purchase requisition creation screen. But system is not defaulting the G/L account.
    Is there anyother steps involve to achieve the G/L default for NON STOCK Materials without assigning the valuation class to Material master.

    Hi,
    You can set with the help of t.codes:
    OME9, OMGO,& OBYC.
    Check the below link how  to set default  General Ledger for  Non stock item (Material Master item) in purchasing document
    http://www.bluemarlinsys.com/ns/0603-03.asp
    Regards,
    Biju K

  • Non stock material info record

    Hi SAPERS,
    Please let me know the difference between the stock material and non stock material info records, Is there any difference in creation of both records.
    Thanks in Advance,
    D Prasad

    Hi,
      When the IDoc for purchasing info records of a stock material is posted, if the purchasing info record for the material and the appropriate supplier does not already exist in the receiver system, the number of the purchasing info record is copied from the central system. Otherwise, the existing purchasing info record is updated.
    ·        For purchasing info records for non-stock materials, the purchasing info record number is always copied from the central system. If a purchasing info record with the same number already exists, the system checks whether it has the same supplier and material group as the info record from the central system.
    Regards,
    Pardeep Malik

  • Sub total of stock and non stock orders on CRM ISA webstie

    Hi Everyone,
    We are using CRM 3.0 ISA. Our distributors would like to see subtotals of Stock and Non-Stock materials on our order entry page B2B website while they are placing an order.
    Could you please give me your suggestions on design and how can I go about implementing this feature?
    Thanks in advance for your help,
    Prasoon

    Hi arun,
    check these links
    total and subtotal in alv
    ALV SUBTOTAL
    Regards,
    Anirban

  • Non-stock material assignment in task list

    Hello members,
                      Can I assign non-stock materials in task list????
    If yes then how???
    Thanks
    Warm regards
    Rajat

    Rajat,
    You cannot directly assign a non stock material to the task list.But you can include the non stock material in the BOM for the assembly(In case of General task list) or Equipment /FL object BOM.Once its included you can then select these non stock items into the task list component screen.
    Regards
    Narasimhan

Maybe you are looking for