Non-stock out of the box?

So I decided to boot into recovery to see what options it had and when I did I was shocked to see the android guy laying on his back with the red triangle above its chest.
I didn't try anything fancy with it, I've barely had the thing for a week, just installing some apps, changing settings, email, and usual cell phone usage. Bought it brand new.
Anyone have any idea what's going on here?

I don't know maybe it was the stock recovery. You might have to check other sites that discuss the specific options using the recovery system especially non-stock ones. The Verizon Wireless Terms of Service prevents such discussions here.

Similar Messages

IPod Touch 1st Generation doesn't work directly out of the box?

I just bought a first generation iPod touch and first things first I plug it into my PC. Nothing happens on the iPod and on iTunes I immediately get a message saying "iTunes has detected an iPod in recovery mode. You must restore it before it is usable with iTunes." So I hit OK and click yes to the message about restoring it to its factory settings, considering that's how it should be anyway since I had literally just taken it out of the box. I finally get a reaction from the iPod, and it's a solid white screen followed by the apple logo, and then for about 5 minutes iTunes says it's "prepaying the iPod for restore..." followed by the error message "The iPod "iPod" could not be restored, an unknown error occured. (1604)" Then the iPod disconnects from iTunes and proceeds to be frozen at the Apple logo screen. I have looked at all the troubleshooting walkthroughs and none of them work because I have never seen a screen on the iPod other than the Apple logo, it seems as though the only way to fix this is if I just take it back and get a replacement

Hello and Welcome to Apple Discussions.
Is the device brand new? - the Second Generation have been around for some time now so I hope you got a good price on it.
Have a read of this article which explains how to deal with the 1604 error:
http://support.apple.com/kb/TS1458
Let us know how you get on.
mrtotes

How do I pair a new Mac mini (out of the box) to a Logitech keyboard

How do I pair a new Mac mini (out of the box) to a Logitech keyboard.
According to the help desk it is not possible you need an Apple keyboard to complete the task this does not seem right as it states on the Apple website that the products can be mixed and matched.
Help?????.

SYSTEM PREFERENCES>Blutooth
Add New device by clicking "+"
Turn keyboard into discoverable mode
If it shows up add it, if not you may need drivers from logitec
I have sucsessfully paired non aple keyboards before

6 hr battery life on a Droid Eris out of the box

Hello eveyone.
I need help I just changed my blackberry storm for the Droid Eris.
Right out of the box and charged the battery lasts 8 hrs tops then it's decresed to 6 hrs.
THhis drop was due to my twitter and facebook usage which is very low and some emails that come in now. I cant surf the net due to the battery drop.
My old storm would go on for 2 days 1 full day with heavy usage. This is a new phone...what gives?
Thx.

It isn't the phones fault. It is due to an under amped battery. It is a strong phone that needs more juice. I would be hard pressed to believe the motorola droid or any other android phone has a huge difference in battery time. If there is a huge difference you don't use the phone as much as some of us do then. I purchased the 1750 battery from seido. Would have got the next one up the 3500 if it had been the price it is now. I recommend buying two and an external charger. I am getting ready to buy another 1750 and charger. This will increase the life of the battery for two reason primary reasons. Proper time for charging and the fact it isn't in use makes the charging cycle much better and effecient. I work in a hospital and get my phone searching quite often, from one netowork type to the next. I can get a solid 12 hours with 20% left at thend of the night when I get home. I have FB chat up litterally all the time bloo, I don't twitter that much but I get updates. I get mail pushed via gmail now. I do use wi-fi off and on as well. Since I'm in doors I don't actually leave the gps on, waste of power in general. Any of the newest smartphones have an underpowered battery. BB doesn't use use the web in the same fashion as android does and it isn't multitasking which is one of the big killers ont he phone. Use a task killer, select the improtant apps to ignor and make sure it cancels stocks and mp3 store, waste of cpu there. You can maximize the power you get with the battery you have, but the 3500, will add a small bit of thickness, but who really wants a hardworking model for a phone. She (the phone) just doesn't feel the same. Sorry to ramble so much, but it gets me when people say it is the phones fault or HTC is the cause. I disabled sense UI for a week and used the open UI that android has. I lost an hour and a half on the average daily, so I have to say from doing that and then turning it back on and getting the missed time back sense UI isn't the cause. I didn't notice any extra pps running when I used the open UI so I have no idea why it acted that way. It coudl have been caused by background jobs that the Sense UI uses but wasn't since it wasn't enabled and the services still ran, now that I mention that I need to check that out. It is the wrong battery fo the job, plain and simple. Replace your moto droid batteries and you will see a huge difference too. You can charge the new batteries for less time(4 hours or less pending on charger) and they will say full, but you get bad results when you short change your batteries charge time. To get the most out of my batteries, I charge them for a full 8 hours, the reason I am getting another battery and ext charger with dock.(http://store.androidcentral.com/mobi-products-cradle-w-spare-battery-slot/5A100A6693.htm) and the battery I am getting (http://store.androidcentral.com/seidio-innocell-1750mah-extended-battery/8A37A6399.htm) or the bigger battery (http://store.androidcentral.com/seidio-innocell-3500mah-extended-battery/8A37A6374.htm) You can find better prices but these are for reference. A note on airplane mode: It disable all radios in the phone. You will not receive calls and txt/mms messages. Basically it turns your phone into a PDA. You can enable the wi-fi for access. Since I replaced my battery I don't do it that often but sometimes I find it neccesary to use airplane mode for some of the remote desktop use I do on my phone.

Any "out of the box working" distro for W500

I'm interested in finding out whether anyone got any distro to work "out of the box" including graphics and wireless on a W500.
Mint 6.0 and Mandriva 2009 were a no-go in this respect.
I know they can be tweaked, but have a very specific reason for not wanting to tweak them on this occasion.
Any real-life experience and pointers (even in the respect of "I've tried this one and it didn't work") will be highly appreciated.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

I can't say for sure but I don't think I had to do anything but disable switchable graphics to get Open Suse 11.1 to work "out-of-the-box" on my w500 (btw I use the intel-graphics).
Couldn't get the integrated 3G-modem (Ericsson F3507G) to work though until I had booted into Windows and installed the latest drivers and used it in Windows. Now that works just fine as well.
Haven't even tried to get the fingerprint-reader to work, since I don't use it.

Is it possible to change out of the box Callout content for already existing library using some javascript API ?

Is it possible to change out of the box Callout content (change DOM elements) for already existing library using some javascript API?
API ?

Hi,
We can use CSS and jQuery to achieve it.
Please add the following code into the Content Editor Web Part.
<style type="text/css">
.js-callout-content{
display:none;
.js-callout-mainElement span{
display:none;
.js-callout-mainElement{
border-width:0px;
</style>
<script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script>
<script type="text/javascript">
$(function () {
$("a[title='Open Menu']").click(function(){
setTimeout(function(){
$(".js-callout-body .js-callout-bodySection").eq(0).html("<span>Test</span>");
$(".js-callout-mainElement span").show();
$(".js-callout-content").show();
$(".js-callout-mainElement").css("border-width","1px");
},1000);
</script>
Result:
Best Regards
Dennis Guo
TechNet Community Support

Proper calibration out of the box?

I just purchased my 20” apple cinema monitor and am very pleased so far. The picture is fantastic but I do a lot of photography and was wondering if it should be calibrated right out of the box. If so, what methods are recommended? I know a hardware calibrator is best but until I am able to purchase one is there any specific software or techniques I should use?
Using a PC by the way.

For photography it is best to hardware calibrate any monitor you buy. Out of the box, you are applying an approximated profile to it, something generic that works "pretty good" with all of the monitors off the assembly line but matches none of them exactly. That's on Mac OS X where Apple includes Apple Cinema Display profiles with the OS; in Windows I don't know what profile the OS associates with the monitor. When you use a hardware calibrator, you create a profile that precisely tells the OS exactly how your specific monitor represents color.
Spending more on a monitor doesn't relieve you of this; in fact the more expensive the monitor, the more likely a calibrator will be included! (On the idea that if you spent that much, it would be unthinkable not to calibrate it to a state better than its generic out-of-the-box behavior.)
Until you buy one, there is apparently some utilities out there that let you eyeball it, but eyeballing is never quite as good as a hardware calibrator because of problems with human color perception, afterimage, etc. all clouding your objectivity.

UserName/Password to enter CSF GUI out of the box

I am trying to login to the CSF GUI provided out of the box with CSF framework.
http://localhost:18001/CSFAleConfig/SFE?
http://localhost:18001/wlm
But I dont know the username/pwd to get in there. I have tried everything Administrator/STC, any user/pwd combination inside edesigner User Management module. But none of the user/pwd working. Does anyone know how to get in these admin modules for CSF?
PS: I dont want to use Oracle directly to change the values of these config.

The replacement arrived on the 22nd which perfectly acceptable since they had to rebuild it all the way back in China.
So far so good I guess since most of the key features work. I did run into some problems before and after update the drivers using the pre-installed Lenovo software; I can't remember the name right now.
Firstly I noticed that my x230 was overheating a bit when I first ran it. The fan wasn't loud, but the air being pumped out was pretty hot, was causing discomfort whenever I had my left hand on the side or when touching the bottom. The good thing was it was not noticeable while the keyboard.
After letting the software do its thing, the excessive heat that was coming from the machine was gone, but new problems came up. Something must have gone wrong during the installation, because the ultranav stopped working. I had to roll back the drivers to get it working again. I also noticed that the webcam doesn't work; all I get is a black screen when run the web cam app in Metro. Since I didn't try running it before updating the drivers, I am not sure if it even works to begin with. The yellow USB 2.0 port also doesn't seem to work at all. I remember disabling it in the Lenovo Settings app in metro to save power, but I think that only disables the always on feature. The USB 3.0 ports seem to work after I plugged in a thumb drive. It is weird that it installed something first after plugging it in.
I have not fully played around with my x230 yet, so there might be other things that I may need to trouble shoot. I plan to do a clean install and install the drivers one by one was needed, so hopefully that will solve my problems. Overall my experience with the x230 has had a rocky start. I really want to like my x230 and I am hopeful that I will eventually resolve all my issues with.

Is the latest update to the 6th gen nano a software download or does it come with the new watch faces and larger icons out of the box

Apple shows the new 6th gen nano with the new selection of watch faces and lager icons etc as per new update, but stores still have the 6th gen nano with just 3 watch faces and smaller icons etc. Is the newer spec just a software update that i do after purchase or does it come updated out of the box?
Thx

It should come out of the box with the new 1.2 update, but if it doesn't you can simply connect it to iTunes, download, and install the update from there.
B-rock

Help Please - on a VC that works out of the box with MAC before I sellup

I have to declare that I’m somewhat frustrated at the moment and I could do with some good advise please bare with me while I explain.
I have recently converted from all types of PC systems and MS OS to Apple. The conversion was based on a few drivers.
1, My wife finally has decided to “learn” how to do her own web work instead of asking me to look up this or that for her. So as she was starting from scratch I thought MAC.
2, At the same time I had a play with Vista at work and disliked it. I was using XP & W2K at the time.
3, I wanted to update my home hardware, which was 3 years old.
4, The accountant said I hadn’t spent enough on IT last year.
5, New project work in the planning that required video/audio work to upload onto the web and everyone said MAC was the best.
So having looked around and done what I thought was enough research I started investing. To date I’ve invested £4500 plus.
Started by buying
iMAC 24” 2.8 Gz Intel with 4GB ram (for the home office)
MacBook Pro 2.4 with 4GB ram (for out and about working)
iPHONE 16GB (which is great)
VMware Fusion was installed for those things that I couldn’t live without until I found a suitable replacement like MS Money, Paint Shop Pro, MS Office etc. Installed XP.
Tried Open Office found it to clunky and hard work working off files for MS Office that others sent/required. Ended up buying Office 2008 only to find VB macros don’t work in Excel and all my company spreadsheets still need PC MS Excel to run so back into XP via Fusion.
Then to MAIL which is great on the iPHONE as I can easily monitor my 5 email accounts, what a result. But now I come to attach JPG files as I would in outlook and they open into the content of text in the mail and will not stay closed but disrupt the message. Wholly unacceptable to my way of working with no cure.
Scanning next, so I down loaded GIMP to replace PSP which I find useless so back to PSP I go again via XP & Fusion.
Next and finally the VC project, Now please bare in mind that all I want to do is shoot film, upload it to edit it and then mount it on the web page. I have no desire to become any form of expert in the field just get the job done.
So reviewed iMovie to understand the spec. Realise it has limitation and reviewed FCE which seems to plug the gaps and boarders on being more professional.
At this point I must say I’m not totally new to this subject as I have used Studio8 and a JVC GR-DVL166EK video cam a couple of years ago and got on ok without any issues simple plug and play with great results.
Having reviewed the standards that the software is reported to work too without any publicly declared exclusions or exceptions by Apple I went shopping for the VC. (I didn’t know of the forum at the time and to the best of my knowledge Apple don’t advise of its existence in any product information on anything I have bought.)
I buy a Panasonic HDC-HS9 for £700 which doesn’t flaming work despite the fact that it should based on all the standards quoted by both manufactures and there are no disclaimers from either party that it won’t work.
I have reviewed the compatibility list on the support page (now I know its there) and find that the Panasonic HDC-SD5 does work. I reviewed the comprehensive detailed model spec on the Panasonic web site and there is no differences between the to models at all accept the HDD.
So why don’t it work?
*At the end of the day can anyone please recommend a VC that will produce high quality results without the need of a 3rd party software to connect and upload files convert and muck about instead of getting on with the job.*
And if all the publicised specs don’t allow you to conclude compatibility how can you protect your investment? Where do we legally stand and where is the accountability to the consumer.
<edited by host>
I am that fed up with the last 3 months of mucking about Bill Gat*es may just get me back.
Thanking anyone in anticipation for some meaning advise and help.
Regards
Alan

Hi, and thanks for you interest. The problems is that whether I'm using iMovie or FCE I get to a stage where the thumbnail image is present but if you try to play, import or any other action in either app it closes down and a message comes up " The Application Final Cut Express/iMovie quit unexpectedly - Mac OS X and other application are not affected" then asks if I wish to relaunch. I then hit the report to Apple button and afterwards relaunch. I was recommended to use Voltaic which I have tried, it worked but is to much mucking about for something that should work out of the box.
This problem happens on both the iMAC and the MacBook so quite sure it's not a OS software issue. All software update are up to date also.
Any ideas?

Not able to start out of the box approval workflow programmatically

We have a requirement to start an out of the box workflow from a .NET web service.
We are using the StartWorfklow method:
wfManager.StartWorkflow(item, association, association.AssociationData
we are getting the below error message at the above line of code: Attempted to perform an unauthorized operation.. Data: System.Collections.ListDictionaryInternal
Then, we tried:
SPSecurity.RunWithElevatedPrivileges(delegate()
        wfManager.StartWorkflow(item, association, association.AssociationData,
SPWorkflowRunOptions.Synchronous);
Now, the workflow got canceled automatically with "Failed on Start" status. In the "Workflow History", it is showing 2 records with "was canceled by System Account." & "failed to start" in the description
column.
Please advise.

Hi Zhengyu,
1. I've already done that:
a) when "SPSecurity.RunWithElevatedPrivileges(delegate()"
is used, there are no errors showing up and code gets executed. However, the workflow failed to start.
b) When I don't use elevated privileges, the code is showing an error (Attempted to perform an unauthorized operation.. Data: System.Collections.ListDictionaryInternal) when
it tries to start the workflow (StartWorkflow method).
2. The workflow starts with no issues through UI. I tried it using "System Account" and another account.
3. I tried also "Collect Feedback" workflow template. Same results...
You can find the code below:
public
stringStartItemWorkflow(stringsitePath,
stringlibraryName,
stringfileName)
stringreturnVal =
String.Empty;
stringwfName =
"VPApprovalWF";
SPUserTokentoken = GetSecurityToken(sitePath);
try
using(Microsoft.SharePoint.SPSiteportalSite
= newMicrosoft.SharePoint.SPSite(sitePath,
token))
using(SPWebportalWeb
= portalSite.OpenWeb())
                    portalWeb.AllowUnsafeUpdates =
true;
SPListlist = portalWeb.Lists[libraryName];
SPQueryfileQuery =
newSPQuery();
                    fileQuery.Query =
String.Format("<Where><Contains><FieldRef
Name='FileLeafRef' /><Value Type=\"User\">{0}</Value></Contains></Where>", fileName);
                    fileQuery.ViewAttributes =
"Scope='RecursiveAll'";
SPListItemCollectionlistItemCol = list.GetItems(fileQuery);
SPWorkflowManagerwfManager = portalSite.WorkflowManager;
SPWorkflowAssociationCollectionassociationCollection
= list.WorkflowAssociations;
if(listItemCol.Count > 0)
foreach(SPListItemitem
inlistItemCol)
if(associationCollection.Count > 0)
foreach(SPWorkflowAssociationassociation
inassociationCollection)
if(association.Name == wfName)
                                        item.Update();
                                        association.AutoStartChange
=
true;
                                        association.AutoStartCreate
=
false;
                                        association.AssociationData
=
String.Empty;
                                        StartWF(wfManager,
item, association);
                                        returnVal +=
"Workflow Started";
break;
else
                                returnVal +=
"No workflows are attached to the library.";
else
                        returnVal +=
"A file with the name provided doesn't exist";
                    portalWeb.AllowUnsafeUpdates =
false;
catch(Exceptionex)
            returnVal +=
"Workflow not started, reason: "+
String.Format("Source:
{0}. Stack Trace: {1}. Inner Exception:{2}. Message: {3}. Data: {4}", ex.Source, ex.StackTrace, ex.InnerException, ex.Message, ex.Data);
returnreturnVal;
SPUserTokenGetSecurityToken(stringsitePath)
SPUserTokentoken =
null;
SPSecurity.RunWithElevatedPrivileges(delegate()
            Microsoft.SharePoint.
SPSiteportalSite =
newMicrosoft.SharePoint.SPSite(sitePath);
            token = portalSite.RootWeb.EnsureUser(
"DOMAIN\\ADMIN-USER").UserToken;
            portalSite.Dispose();
returntoken;
privatestaticvoidStartWF(SPWorkflowManagerwfManager,
SPListItemitem,
SPWorkflowAssociationassociation)
SPSecurity.RunWithElevatedPrivileges(delegate()
            wfManager.StartWorkflow(item, association, association.AssociationData,
SPWorkflowRunOptions.Synchronous);
Thank you all for your help.
Regards,

Not able to get Out-of-the-Box Examples Index Page for running the jsp examples

Hi
I am a new person using weblogic first time I installed the weblogic 7.0 beta
version on my machine.I am trying to start the weblogic server console so that
I can configure web applications examples on my machine.
I am getting following error and not able to view Out-of-the-Box Examples Index
Page
error:
<Apr 5, 2002 12:11:39 PM IST> <Error> <SystemDataStore> <null> <Unable to listen
on Port 7003: Address in use: JVM_Bind>
Please help me to find the reason to have this problem
Thank You in advance
Vikas

Hi.
Please post all WLS 7.0 beta questions to the beta newsgroups -
weblogic.developer.interest.70beta.*.
Thanks,
Michael
Vikas wrote:
Hi
I am a new person using weblogic first time I installed the weblogic 7.0 beta
version on my machine.I am trying to start the weblogic server console so that
I can configure web applications examples on my machine.
I am getting following error and not able to view Out-of-the-Box Examples Index
Page
error:
<Apr 5, 2002 12:11:39 PM IST> <Error> <SystemDataStore> <null> <Unable to listen
on Port 7003: Address in use: JVM_Bind>
Please help me to find the reason to have this problem
Thank You in advance
Vikas--
Michael Young
Developer Relations Engineer
BEA Support

Add javascript to Out of the box Modal Dialogue Box in Sharepoint 2010.

Hi,
We have Sharepoint and Project Server 2010 SP-2 enviroment. We are using Project Server Timesheet for our managing Time logging.
Project Server 2010 has "Add existing task" Modal Dialogue box in which I want to add "Javascript" code in order to sort the Project Server Timesheet Line Claasification listbox control in Ascending order.
As you can see from below screenshot "Standard" the Out of the box timesheet line classification is coming at top and then our custom line classification coming.
But I want to sort this list in ascending order so that this "Standard line classification can come at the bottom of the listbox control.
Please suggest me how can I achieve this.
Thanks much !!!
Sachin Vashishth MCTS

Thanks SaiRam from input, I can get JQuery for sorting the control over the internet no issue. I have to pass the ControlId in J-Query to sor the items in that control and I am not able to get the control id as it;s modalk dialogue box.
Can you please explain further here, also let me know in case I am wrong in my understanding.
Thanks !!!
Sachin Vashishth MCTS

Dynamic DNS (via DHCP) out of the box?

Greetings!
I was just wondering... Does OS X support Dynamic DNS updates out of the box?
I can't seem to find any confirmation if 10.5 uses bootpd (which I think it does), and if bootpd supports dynamic DNS updates with the named service built into Leopard Server. There don't seem to be any options in Server Admin to enable this... So I'm a little hazy as how to enable dynamic DNS without compiling my own version of ISC-DHCP.
Just for clarification here; what I'm looking for is the ability to update a DNS zone with a PTR/A record(s) of machines that send a hostname as a part of retrieving a IP address from a DDNS-enabled DHCP server. Ie, "mybox" requests IP from DHCP server, DHCP server updates "mydomain.tld" with a record for "mybox", so that "mybox.mydomain.tld" is resolvable afterwards by the machines on this subnet.
Cheers,
-SC

This is a strange topic because implementing Dynamic DNS on Mac OS X Server looks like it should be child's play... so why hasn't Apple done it? Could it simply be that Apple sees no need for it at this time? Mac OS X clients don't need it to sit happy with a Mac OS X Server. Neither do Windows clients using a Mac OS X Server PDC.
Apple has implemented Dynamic DNS client support into the Active Directory Plug-in in Leopard. In this environment, of course, the client's DNS server is most likely to be an Active Directory-integrated DNS server which happily support DDNS. Unfortunately this Dynamic DNS facility is not immediately available to those not using the Active Directory plug-in.

In search of assistance learning how to modify the mail message from an out of the box SP2010 approval workflow.

So, I have found the article
http://punaro.com/2012/01/derek/modifying-a-sharepoint-2010-workflow-email/comment-page-1/ which appears to walk through the process of modifying an out of the box workflow's mail message.
However, there is a basic problem that I run into before I get started.
I am logged into the system as a regular user (ie not a farm admin, etc.).
I do, however, have full control on the site on which I am working.
I create a custom list.
I create a simple one step approval - sharepoint 2010 out of the box workflow.
I start SharePoint designer and give it the URL of the list. It opens up and I see the various objects on the left side of the screen.
I click right on the Workflows object - which is where the article says I will find the ability to copy and modify the workflow.
All I see is "open", "open in a new tab" and "Pin".
I selecdt open in a new tab - and I get a blank screen labeled workflows that says "There are no items to show in this view".
So, I click on Lists and Libraries, then on the name of my custom list.
When the list displays, the Workflows section of the page has a "Modified Workflow" displayed.
When I right click on it, no menu is shown. When I click on the modified workflow, I get the workflow settings page for that workflow.
I am trying to figure out how to create the copy of the workflow so that I can modify one of the mail messages in SharePoint designer.
Is there someone who has some advice on how to find this copy and modify option? Or perhaps a web site, web forum, article series, or book covering the topic?
Thank you!

Hi lwvirden,
According to your description, my understanding is that you want to modify the OOB approval workflow in SharePoint Designer.
After opening the site in SharePoint Designer, just click Workflows in the left panel and then the workflows in the site will load in the right part.
If you want to copy and modify the OOB approval workflow, then you need to right the approval workflow
Approval – SharePoint 2010 under Globally Reusable Workflow. After that you will see the
Copy and Modify button.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Non-stock out of the box?

Similar Messages

Maybe you are looking for