Non-stockable items - Error of G/L Account - ( Error No - ME45 )

Hi MM Experts,
While creating PO for Non-stockable items I am getting one error which says that - " You can not enter G/L account directly for the controllling area/ Co. Code".
Can u pls. help on this issue..
Thanks & Regards,
Mahesh

Dear Karthik,
There was an logic in the idoc processing for the text segment of the idoc.
If some text/number avaialble in this segment (text) then system will check for the first 4 characters as chart of accounts and next 3 characters as transaction and look for the GL account in the T030 table of the OBYC.
In my case there was a space (more than 4+3=7) and system was taking 4 spaces as COA and 3 spaces as transaction key and looking for the GL account in T030 table. And unfortunately there was an blank entry in T030 table and due to this system unable to find the GL account for this combination (Spaces).
To resolve this issue go to SE16 and give table name EDID4 and give the segment name (segment of text field) and idoc number and search. You will get all the text related segments and try to find the segment having Space before the text/numeric filled in that segment.
There after edit the IDOC and remove the space from the text field of the segment and try to re-process the IDOC from BD87 transaction code.
Regards,
Syed Abdul Mazid

Similar Messages

Non-Stock Items - G/L Account Error ( Error No - ME45 )

Hi MM Experts,
While creating PO for Non-stockable items I am getting oner error which says that - " You can not enter G/L account directly for the controllling area/ Co. Code".
Can u pls. help on this issue..
Thanks & Regards,
Mahesh

Hi Mahesh,
I think u are trying to create a PO with a GL a/c to which no cost element is assigned. Check with ur FI guys to give a correct GL a/c.
chintu

Non Stock Item- G/L accounts

Hi ,
Can anyone tell me how do the consumable items/non stockable items pick or are assigned the G/L accnts.??
Thanks and Regards.
Deepika

Hi,
For non-stock or consumables, PO provides the G/L account details via Account Assignment tab details when appropriate account assignment category is selected for the line item in the PO.
From table T156X (example, GR with ref to PO for consumables)
MvT Value updating Quantity updating S Mvt Cns VStr Cn AM Chk
101 B V WE06 1 X
So, system uses the G/L passed from the PO.
If its a case of Service PO, because you can skip assignment of accounts in the PO using Unknown account assignment category, it uses the G/Ls that you assign in the service entry sheet.
Hope, it helps!
Regards

Error In Posting to accounts - PF calculated wrong

Hi,
I am getting error in Posting to accounts- error - Posting balance is not cleared (Period -
Following Wage types are calculated wrong -
Expense
MF90 PF adm chrgs * 1,00,000 = 715,000.000
MF70 EDLI contri * 1,00,000 =6,500.000
Balance sheet
MF90 PF adm chrgs * 1,00,000 = 715,000.000-
MF70 EDLI contri * 1,00,000 = 325,000.000-
MF80 EDLI adm chrgs * 1,00,000 =6,500.000-
/3P2 Professional Tax Basis = 8,387.096-
Symbolic accounts assigned are as standard - no changes made
Please help me solve this.
Thanks in advance.
Monica

Hi Monica,
We have solved this issue in our company.
For this you have to create another wage types & make a "PCR" as it divide the 100000 amount from the technical wage types, & then instead of posting the technical wage types post the new wage types u have created.
Don't worry about statutory reports as in there SAP is using some factor which will give the correct value.
Regards,
Gaurav

Com.apple.Server.Accounts error 2 - Local Network Group problem

I am lost :-)
just to specify, this is not a production server, it is just a learning platform for me.
I did a format and start over my server configuration
in order
DNS
DHCP
Open Directory
Profile Manager
User and group
File Sharing
very basic config.
Somewhere during user and group something happen
I did create a new Local Network Group and 2 Local Network User, me and a Directory admin
but now, when I create a group, it seem I can only create local group
and I can't edit Local Network Group
Local Group -> no problem
I can edit Local Group. I can add member
or I can go to a member and add it to a Local Group even if the user is a Local Network User
it work
Local Network Group -> does not work
I can't edit Local Network Group, can't add member
if i go the same Local Network user I added to local group and try to add it to a Local Network group, I get this error
com.apple.Server.Accounts error 2
I dont know where I went wrong :-)
any idea
Thank you

I just reformat and restart the configuration :-( but I might have the same problem again, so i hope to understand why it happened.
I had the problem on both the server and a client machine.
Part of the Local Network User and Groups were greyed out, so I could not edit them
My airport setting for DNS was set to my server, so the client automatically got the local ip of the server for DNS.
On the server, initially, the formatting DNS IP was so to my airport, then I changed it to the DNS of my Internet provider.
but for the self ip 127.0.0.1 i did saw it there at the begining but maybe when did change later it might have been affected.
I did changed the System Preferences>Network setting to a fix IP even if my airport was set as the DHCP with a fix IP for the Mac Mini.
I remember not seeing a DNS in that page. I will check for that now that I am about to start again.
and also, I tried to change the DHCP to be from given from the Mac Mini (like I read in the book) but when I did a
ipconfig getpacket en0
it was still showing the airport as the DHCP server
I will not set it this time.
Thank you
I will come back later with some update
Thank you

Com.apple.accounts error 18

I can't install new apps to my iPad, instead just getting the error code "com.apple.accounts error 18"
What does this error code mean and what do I need to do to be able to install apps again on my iPad?
(iOS is fully up to date, as are all currently existing apps. I can update everything fine, I just can't install new apps)
Thanks

I have now managed to resolve the issue, despite this appearing to be a unique problem.
After quite a large amount of googling, I noticed that other people that just had issues with iTunes and the App store not allowing updates, downloads etc were frequently caught out by not having a credit card set up. As such,
i then looked to see how to access my billing info to check that everything was up to date on my end. To do this, one goes to settings>App Store>AppleID and then should be presented with a dialogue box letting one choose to view account info. When selecting to do this, I got bounced the same error. Thus I concluded the problem must be with the ID. Further attempts at accessing or updating my info didn't work (you can't just do so online without connecting to another computer etc, as that is clearly more user friendly...) so I guessed there would be little harm in just signing out and back in again - it might at least give me the recursive login problem instead which is possibly fixable. Needless to say, I didn't have the recursion issue, and was able to sign back in fine, and finally access amd update my billing info. The credit card I had been using was cloned a while ago so obviously it had been cancelled, and I think this is what caused the initial issue, while Apple's paranoid purchasing system meant that it was never flagged for my attention.
SO if you've stumbled upon this article suffering from the same issue (at the time of writing I know this to be a unique support posting) I hope this solves it for you. If not, I'm feel sorry for you, and you'll likely be crap out of luck and on your own - welcome to Apple tech support.

Converting a GL account from Open Item Mgnt to Non-Open Item Mgnt

Hi All,
I have a GL account which needs to be switched from being an open item managed account to a non-open item managed account. The account has already been posted to. I have therefore posted a document to bring the balance of the account in local currency to zero and have also cleared the account so there are no open items showing (via transaction FBL3N).
However, when I try to untick the 'open item management' box in the master record (via transaction FS00), I get an error message saying that the balance is zero but open items still exist. I'm abit confused as the balance of the account is zero and there are no open items that I can see, even though the system is telling me there are!
Am I missing any steps? Could someone take me through exactly what I need to do to be able to untick the box and set the GL account correctly.
I've already searched on the forum and found advice about changing the settings via OBA5, but when i look at that transaction there are no messages with class FH in there.
Any help would be appreciated.
Many thanks
James

Hello,
In your case, though balance is ZERO, they are not cleared against each other. It is the reason you are still facing the problem.
If ther is no open item management check box, then copy program RFSEPA02 to ZRFSEPA02 and append the initialization control.
If there is already open item management but you want to remove then copy RFSEPA03 to ZRFSEPA03 and append the initialization control.
Do the following steps:
1. Block the account for postings (all check boxes) in FS00
2. Run the customized Z program (Give the company code and account number)
3. Unblock the account for postings (remove all check boxes) in FS00
Take help from your ABAPer to stopping the initilization error check.
Hope this solves your issue.
Regards,
Ravi

Changing an OI Managed Account to Non-Open Item

We are on ECC 6.0 instance.
We have an account which is open item managed and had activity in it. We want to change it back to non-open item managed. We are not sure about all the impacts. Would appreciate if you guys can share your experience.

Hello,
Even if you are on ECC 6.0, but not activated New GL functionality, you can follow the following procedure.
In your case, though balance is ZERO, they are not cleared against each other. It is the reason you are still facing the problem.
If ther is no open item management check box, then copy program RFSEPA02 to ZRFSEPA02 and append the initialization control.
If there is already open item management but you want to remove then copy RFSEPA03 to ZRFSEPA03 and append the initialization control.
Do the following steps:
1. Block the account for postings (all check boxes) in FS00
2. Run the customized Z program (Give the company code and account number)
3. Unblock the account for postings (remove all check boxes) in FS00
Take help from your ABAPer to stopping the initilization error check.
Hope this solves your issue.
Regards,
Ravi

Error: there are non exicisable item with cenvat tax code

I am getting an error message there are non exicisable item with cenvat tax code while trying to add po for pick and pack from sales order. I request all of you to help me with it.
I have already checked if the item and ware house is exicisable in the check box of the master data.
Best regards,
Sandesh.Sreyamsh

Thanks mahendra and rahul,
Unfortunately my issue is not solved yet, the tax is not manually created it was created by sap during new company creation. I checked by adding other tax type in sales order but every time when I try to create sales bom it gives the above error.
@ Rahul the tax is under cenvat type and the Items has been added under exercise transaction. here is what im trying to do
I created a sales order for 4 of my items.
Then i try to create po for two of my as pick and pack items by checking Purchase orders indicator under logistics tab of sales order.
At this point i am getting the above said error.
All the items i am trying to add is exisable and tax is also of cenvat type.
Please help me out of this as im stuch very badly in this issue.
Regards,
Sandesh.Sreyamsh

Change GL Account from Open Item Managed into non-Open Item Managed

In the former R3 environments, release 4.6 there was the program RFSEPA03 to turn off open item management.
However, in ECC 6.0 this program is blocked and there seems to be no possibility to change a GL account back to non-open item mgt.
Please comment,
Kind Regards WR

Yes .. I Agree with you ...
Actually I accidently, did not check the GL first, but run the ZRFSEPA02 first .... because of that, my GL is check as an open item and as a recon account too ...
any solutions ?

Non inventory item associated to gl account

is there anyway i can create an non-inventory item and attach to a particular gl account.

Hi.......
GL may hit only in case of Final Invoice as it is non inventory item Accounting won't happen at Inventory movement stage.....
Regards,
Rahul

How to make openitem managed GL accounts to Non open item and the implicati

Dear all,
Can any one please tell what are the steps to be taken for making an openitem managed GL accounts to Non open item and the implication of this change.
Thanks in advance.
Gokul

Hi Gopal,
You can maitian a gl a/c without line item display to do so follow the path
sap easy access-accouting-financial accouting-general ledger-master records-gl a/cs-individual processing-centrally, or trans code FS00
then open the gl account in the required company code and click control data ,then click change and under account management in company code u can un check line item display and save the changes.
Make sure line item display is off for recon accounts as the line item are maintained at customer or vendor level and for bank a/c line item should always be ticked on .
Hope this is helpful if so reward points.
regards,
Mayur

Change G/L Account from Non Open Item Managed to Open Item Managed

Experts,
We need to change a g/l account from Non - Open Item Managed to Open Item managed or in other words enable the Open Item Management for an account.
What's the best way to do this ? so that the existing items get cleared automatically.
All answers would be duly appreciated and rewarded with points.
Thanks,
Nandita

HI,
When u have created the GL and if you have not activate or deactivate the OPEN ITEM mmanagement.
You have to use the follow SAP std progrom. ther are four std program SAP has provide for this these
RFSEPA01
RFSEPA02
RFSEPA03
RFSEPA04
you have to check the documentation of the program to know which one u have to used here for your case .
hope this is clear assign the points.
with regards
krishna

Account Error: non-exsistent

This is my first foray into web publishing.
I have published my web pages to Mobile Me, and all of the pages have turned blue - so far OK. When I try to use the visit button all I get is a blank web page with the line "account error: non existent" The site publishes fine to a local folder!
If I go to my account pages within Mobile Me, I can see all of the web structure (tree), but if I try to load any of the pages a little "no entry" sign appears.
I am a little lost now on knowing what to do
Thanks in advance
Gary

Gary ~ If you prefer not to wait for a possible specific suggestion here, MobileMe live chat support is now 24/7 — see this announcement.

How to assign account assigment automatically Non Stock Item ?

Dear All,
How to assign account assignment automatically at PO level for Non Stock Item Material for expense charges ? Since our user does not familiar with the GL Account code.
Regards,
Setiadi

Setup for Automatic Account Assignment
SPRO-IMG - MM- Valuation Class and Account Assignment- Account Determination-Account determination without wizard
1. Define valuation control T Code OMWM
2. Group together valuation areas T Code OMWD
3. Define valuation class T Code OMSK
u2022 Account category reference
u2022 Valuation class
u2022 Material type / Account Cat Ref
4. Define Account grouping for movement type T Code OMWN
5. Configure automatic posting T Code OBYC
Maintain Transaction/ Event Keyu2019s for your Chart of Accounts
BSX - Stock Posting / Inventory Posting
PRD - Price difference
GBB - Offsetting entry for stock posting
WRX - GR/IR Clearing
Let me know if you need more detailed setup procedure-Switesh!
Edited by: Switesh Nage on Dec 4, 2011 9:33 AM

Non-stockable items - Error of G/L Account - ( Error No - ME45 )

Similar Messages

Maybe you are looking for