Non supported JVC Camcorder BRDVM70

I am trying to upload a videotape from this model of digital camcorder to my OS X system MAC. I note that the model is no longer supported. What do I do?

What do I do?
Buy a 4-pin to 6-pin Firewire cable.
(USB is just for stills.)

Similar Messages

Supporting JVC HD type Camcorder

I have a JVC Camcorder, GZ-MG26.
A Hard Drive type camcorder.
And movie file are saved as "MOD" type.
not "AVI" or "MOV" type.
I don't know I can easily edit iMovie with my JVC Camcorder.
Please help me!

Hi A Dawg - welcome to the forum!
DVD and HD type camcorders record in MPEG format. This is incompatible with iMovie, which prefers DV format (dv tape-based cams). There are workarounds, but you should be aware that MPEG is not really an editing format, as it is not lossless recording - instead it's intended as a viewing format.
To convert the MPEG to DV you need:
MPEG StreamClip (free):
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
and maybe also
Apple MPEG2 PlayBack ($20):
http://www.apple.com/quicktime/mpeg2/
If it is a just-purchased camera, it may be sensible to swap it for a DV cam.

Satellite L300-243 to connect to JVC camcorder

Toshiba Satellite L300-243 was purchased primarily to use with Pinnacle 12 to do video editing.
My previous PC had a 4-4 firewall connection but there is no similar connection on laptop.
Do I use a 4 - USB lead to make the download from camcorder to laptop?
Or is there a different socket on laptop I need to use?
Bob

Hi
I assume the JVC camcorder supports the firewire interface and it was connected to the computer via firewire cable.
Unfortunately, it seems that Satellite L300-243 does not support the firewire port.
In your case you could purchase an Express card which contains firewire port.
Then you could connect the camcorder to the notebook.
Cheers

OS 10.6.8 idvd version 7.1.2 crash with JVC camcorder GZ-HM30BU

Has anyone had any difficulties with their idvd becoming non-usable?
I have a MacBook Pro with OS 10.6.8 using idvd 7.1.2 and have a JVC camcorder GZ-HM30BU transferring HD video files using a SDHC card. After importing and editing using imovie, I share using media browser large (960x540). I then create a new dvd using idvd (DVD-R 4.7 GB). After the movie is finished burning the 1st copy ejects and then my macbook asks if I would like to create another dvd. When I insert the new dvd, my macbook pro ejects the blank dvd and states "done" even though the copy was not made. I must then select "cancel". After that, I am no longer able to create dvds using my macbook without replacing the idvd application from my backup disc. Has anyone had any difficulties with their idvd becoming non-usable?

thanks guys; but the problem is that iDVD does not want to burn a disk now from the original movie-project. i see the movie project on teh desktop and can launch it just fine - even play it through the iDVD application - but when i click burn, it asks for a disk (I insert a memorex DVD+RDL 8.5Gb 240 minute dual layer) and it ejects it a few seconds later. the IDVD progress bar still runs as though it is burning just fine - its progress drops from 18 minutes all the way to "less than a minute" and then it hangs. even if i insert a different memorex disk, it still doesn't start actually burning it. it only burned the very first memorex disk i inserted successfully. i have tried disk utility to burn from a .dmg file copy of the original successfully burned disk, but disk utility can't burn onto the memorex disk either. maybe something wrong with the super drive? thanks for your ideas.

JVC Camcorder + Vista + Firewire + Dell = Trouble!!!

I purchased a Dell several weeks ago, with Windows Vista. The PC has a firewire port and I expressed to the salesman that one thing I wanted to be able to do is work with video from my JVC camcorder. I thought it would work.
Well, a week or so ago I tried to start working with this. The SHORT of it is....does not work...does NOT recognize the camcorder.
I could not get an answer from Dell or Best Buy on how to solve this. I was hoping that someone out here could help me find the answer I seek.....thanks.....kaj

Just for others use, I went to the Apple retail store. Eventually, the one-on-one trainer was able to bring the video up by starting both the play on the camcorder and the import on the screen of the iMovie application. The MANUAL setting must be used, as said earlier.
Now, if anyone could actually see my movie it would be great. Unfortunately, while we sent it to the Me.com Web gallery or whatever it is called now, none of the invited people can view the movie.
Oh my, this is a long process.

Satellite U300 connected to TV - Non supported video format

I am using Toshiba Satellite U300-15q and it has a vga output so i bought a cable and a box that transfers te analogue signal of vga to digital of hdmi so that i can connect it to my 32' TV Sony make.
But if i connect it it says on the tv in yellow letters non supported video format.
Why is that and how can i fix it ?

In the whole story problem is that you use third part hardware or software so this described issue has nothing to do with your Toshiba notebook or Toshiba in general.
On notebooks side is important that video signal is sent on proper way. What happen later and why this signal is not transformed correctly is matter of this box.
Which box do you use?
In my opinion you should contact manufacturer of this box and their support. They should know how it works and how to fix this.
Generally speaking, Toshiba has nothing to do with this problem.

How can i get my mac book pro to recognize a JVC camcorder?

How can I get my mac book pro to recognize a JVC camcorder using a Sony CAMERA USB cord??

Gotta say thank you — again. Sorry the posts were spread out over more than one location. I'll check and see if Third Party Software is considered a "peripheral", maybe that would have been a better single thread choice?
Definitely news we can use and the reference link is appreciated.
OT ~ We keep becoming more and more aware of how easy it is to lose one's bearings when it comes to keeping up with info tech. My husband and I are both official members of the geezer set and have been out of the work force for some years. You really do pick up so much just by being in the environment where people are using things to get work done. A couple of old MP3 players, PPC G5, and a vintage Inspiron 3800 that someone didn't want any more is about it. No cell phone, no iPod, no iPad, no home wireless network, no streaming media. Fixed income. So we do with what we can as long as we can. If we could get by without that Intel processor, we'd probably make do with what we've got. On the other hand, we've really wanted a notebook for a very long time and have to admit that needing to upgrade to accomodate my husband's project is pretty much just the "reason" we need. I really mean it when I say that we are beyond appreciative that users take the time to share info and patiently educate those of us who fall into the "slow tech" category.

How to print on a non supported AirPrint printer

We have a wireless HP 6300 inkjet printer.

It's possible to use free software (Virtualbox and Ubuntu) to fix the broken iOS 5 Airprint printing with non supported printers. Here's a fix that works on my imac, but should also work on even a windows pc.
My setup is a lion imac with 2 non-airprint supported usb printers attached, a belkin wifi router that provides network connectivity for my imac, ipad, and iphone.
Install ubuntu 11.10 in a virtualbox vm. Specify to use the "Bridged Adapter" with "en1: WiFi (AirPort)" for the network hardware. Make sure the imac's usb printers are setup with sharing. On ubuntu, select System Settings > Printers and add your imac's shared printers to the list. Then start ubuntu's firefox and set "localhost:631" in the address. On the administration tab, under the Server section, check "Share printers connected to this system" and hit Change Settings button to activate it. Go back to ubuntu's printer setup, and right click on each printer and check that the properties Policies tab does not have any messages about it being unshared. If so, then go back to firefox and make sure the Server sharing checkbox is enabled. It may help to reboot.
Fire up virtualbox to be able to use AirPort printing to your imac's usb printers, when you want to print from the iphone or ipad. This also works on iOS 5.
Only problem is error message from iphone to check the printer for errors, even though it actually prints ok.
references:
http://askubuntu.com/questions/26130/how-can-share-my-printer-so-that-i-can-use- it-with-airprint
https://lists.ubuntu.com/archives/ubuntu-devel/2011-June/033611.html

MacBook Pro doesn't recognize JVC camcorder GR-X5E

Hello
Does somebody know any kind of "adapter" for MacBook Pro with OS X 10.5.8 that makes the signals of my JVC camcorder GR-X5E readable?
jvc.ch doesn't has a solution
Thank's in advance!

I only used the USB cable to connect camera and MacBook, opened iMovie and waited until the icon would appear. It didn't. Also on the desktop nothing happend.
Therefore I asked jvc.ch and they said, that there was no possibility...

Non supported character set error

Hello, I have a j2ee application that uses OLAP API to make queries against cubes created with cwm2 packages, in a database (db 1).
I've replicated the schema in another db (db 2), importing the user (with a dmp file) and throwing the object creation scripts. This works right, and the objects in the catalog are all validated. But my j2ee application doesn't work against this new user; some errors appears.
The two databases are the same version, the only difference is that db 2 was installed using WE8ISO8859P15 character set. Is there any problem with this set and the olap api ? The character set in db 1 is WE8ISO8859P1.
The error is:
"oracle.express.idl.util.OlapiException: Non supported character set: oracle-character-set-46".
I'm using ojdbc14.zip and orai18n.zip in the WEB-INF/lib directory of my application. My database version is 10g r. 2 (10.2.0.1.0)
Thanks by your reply.

At what point does this error occur? Can you provide more of the stack trace?
Geof

Non supported character set: ...

Hi,
I'm sure I have a well known problem. When trying to post a new row to my DB (Oracle 9i Rel. 2) a java.sql.SQLException is thrown with the message Non supported character set: oracle-character-set-178
What I did to fix this error is:
- checked if nls_charset12.jar is in the classpath (it is)
- tried thin instead of oci (the error is the same)
- changed my NLS_LANG to ....UTF8 or ....WE8ISO8859P1 (didn't help also)
Does anybody know something else what I can do?
Thank you.
Axel

I found the solution myself.
I had to use the classes12.jar (etc) shipped with JDeveloper. I replaced these some day because OCI access didn't work with these classes. But now it seems to work.

Non-supported Character Set-36

I'm using Oracle8 and I have a Java application that tries to insert a text message in a queue. The file works in my company, but when I try to run it from another place it produces an error saying:
oracle.jms.AQjmsException: Non supported character set: oracle-character-set-36
Knowing that NLS_LANG parameter is set to American_America.AR8ISO8859P6 (it must be kept as AR due to another application).
So how can I get rid of this error??
thanks a lot

I'm using Oracle8 and I have a Java application that tries to insert a text message in a queue. The file works in my company, but when I try to run it from another place it produces an error saying:
oracle.jms.AQjmsException: Non supported character set: oracle-character-set-36
Knowing that NLS_LANG parameter is set to American_America.AR8ISO8859P6 (it must be kept as AR due to another application).
So how can I get rid of this error??
thanks a lot

Non supported character set: oracle-character-set-41

Hi everyone,
I have a issue while passing a VARRAY from my Java Class to Stored Procedure.
TYPE ERR_DATA_ARRAY AS VARRAY(100) OF VARCHAR2(1000);
In my code i have used ArrayDescriptor and ARRAY class of oracle.
When i run my program in eclipse i get following exception:-
java.sql.SQLException: Non supported character set: oracle-character-set-41
at oracle.gss.util.NLSError.throwSQLException(NLSError.java:46)
at oracle.sql.CharacterSetUnknown.failCharsetUnknown(CharacterSetFactoryThin.java:171)
at oracle.sql.CharacterSetUnknown.convert(CharacterSetFactoryThin.java:135)
at oracle.sql.CHAR.<init>(CHAR.java:159)
at oracle.sql.CHAR.<init>(CHAR.java:183)
at oracle.jdbc.oracore.OracleTypeCHAR.toDatum(OracleTypeCHAR.java:161)
at oracle.jdbc.oracore.OracleType.toDatumArray(OracleType.java:166)
at oracle.jdbc.oracore.OracleTypeCHAR.toDatumArray(OracleTypeCHAR.java:208)
at oracle.sql.ArrayDescriptor.toOracleArray(ArrayDescriptor.java:1517)
at oracle.sql.ARRAY.<init>(ARRAY.java:117)
at com.niit.slims.common.ejb.Array_test.test(Array_test.java:52)
at com.niit.slims.common.ejb.Array_test.main(Array_test.java:20)
I have added ojdbc14.jar.And my working jdk is jdk1.4.
Plz help
Edited by: user10569173 on Dec 8, 2011 3:58 AM

I am not an expert here,
but it seems that since you are using ojdbc14.jar you may actually need the
nls_charset12.jar
instead of the one I suggested previously.
Regards
Peter

JVC Camcorder

I'm not very good with computers and am new to macs, my jvc camcorder won't import video to imovie. I plugged it in with the included USB cord that worked fine on my PC but it doesn't recongnize it when I plug it into my ibook G4 what do I have to do too get it to work?
ibook G4 Mac OS X (10.4.8) Camera Model# GR-D72U

Hi!
You need a 4-pin to 6-pin firewire to import to imovie.
It looks like this:Click Here
They are fairly inexpensive at any electronics store.
:)Sue

I have inserted a non supported CD that won't come out of the DVD player

How can I get the non-supported DVD to eject? Nothing happens when I hit the eject button.

Actually, what I did after that didn't work, I found the eject "up-arrow" near the CD list. When I hit that it ejected!

Non supported JVC Camcorder BRDVM70

Similar Messages

Maybe you are looking for