Non Unicode R3 to non Unicode BI

Hi,
We have a Non Unicode R3 system. My question is, should I install a non Unicode BI system or a Unicode BI system while installing NW2004s. We only have English language. What is SAP recommended. What are the pros and cons of installing unicode or non-unicode BI when we have a non-unicode R3 system.
Thanks

Go for Unicode BI if you just have one langauge. Sooner or later, R/3 wull be upgradedd by the client, which would be unicode compatible then!
Regards
Prakash

Similar Messages

Error during Upgradation SCM 5.0 to SCM 5.1 Non-Unicode System

Hi,
I am Upgrading SCM 5.0 Non-Unicode System to SCM 5.1 Non-unicode on Windows 2003 Server with MSS 2005 DB. During the initial PREPARE (EXTRACTKRN_PRE) phase I am getting an error like
init
2010/06/15 07:03:45 PREPARE: START OF PHASE EXTRACTKRN_PRE
ERROR: Cannot find file 'C:\SCM_2007_Upgrade_Media\51033508_8\NW_7.0_SR3_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_X86_64_AUPG
KERNEL.TOC'
SEVERE ERROR(S) OCCURRED IN EXTRACTKRN_PRE !!!
The file name it is looking for does not exist in any of the Kernel versions I have checked. If I try to skip this step it is asking for the PASSWORD. How can I get this password? (only from SAP Support or any note?).
What is the Solution for the above ERROR. Please help.
Thanks,
Ajay.

> I am not posting the question in the same group. I am posting in different groups due the confusion of in which group to post > > and of course to get faster response. All people cant check all the groups to answer. Moreover I am not keeping the questions > open. As soon as I get the answer I am proving the answer in every group and immediately closing the question.
> So what is the problem with that? I do not think this is creating any inconvenience to any one, just increasing the number of questions in the group.
This is not wanted as written in the "Rules of engagement". This is a public forum, not a "help desk".
> OK, As you said If I post only in a single group do you guarantee that you will check every time all the groups to answer my question/ find my question?
Again, this is a forum where the question are answered on a volunteered basis. "Demanding" help is not the way to go, you can ask for help but there's no guarantee that you'll get an answer. If you urgently need help use the official support channels or get yourself a consultant on-site who can answer all your question instantly.
> And please paste the URL of those rules that this is wrong. Since I didnt read that.
It's the first entry in every forum, it contains the "Rules of Engagement" which say:
Please do not Cross post.
Post your question in the most appropriate forum; not multiple forums. This is bad netiquette and will might only aggravate potential repliers.
Just imagine if everyone like you would paste questions in several forums.
Markus
Edited by: Markus Doehr on Jun 15, 2010 5:29 PM
Edited by: Markus Doehr on Jun 15, 2010 5:30 PM

Unicode Errors - Interface with non-Unicode 3rd party system

Does anyone have an experience working with an interface between a Unicode SAP system and a non-Unicode 3rd party system? Would appreciate your input on existing data declaration and logic (prior to SAP Unicode conversion), if changes need to be made to the character types and upload/download functions.
We are doing our testing in a newly converted Unicode system which has interface sending files through SAP Business Connector, and uses TDAccess/COMM-PRESS to encrypt the payment file.
We are getting an COMM-PRESS error that it's not able to get the private key
ERR=>RC=107#Error building signature segment (S1A/S2A) ERR=>#Error getting private key: #PUBLIC KEY FINGERPRINT = , rc = 524
The issue seems to be that the passphrase is not received correctly in COMM-PRESS (codepage 1100) from Unicode SAP (codepage 4102). The passphrase is uploaded from a text file (codepage 1100?) to T_PPLOC and then to W_PPLOC.
TYPES: BEGIN OF T_PPLOC,
         FLINE(64) TYPE C,
       END OF T_PPLOC.
DATA: W_PPLOC(64) TYPE C
CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        FILENAME                = W_FILENAME
        FILETYPE                = 'BIN'
      TABLES
        DATA_TAB                = T_PPLOC
    LOOP AT T_PPLOC.
      IF W_PPLOC IS INITIAL.
        MOVE T_PPLOC-FLINE TO W_PPLOC.
      ELSE.
        CONCATENATE W_PPLOC T_PPLOC-FLINE INTO W_PPLOC.
      ENDIF.
    ENDLOOP.
Comparing the results between a Unicode and non-Unicode system, the uploaded passphrase is different because of the codepage. But even if I convert the passphrase first from 1100 to 4102 codepage, it still fails.

Hi,
Try this by sending value to the CODEPAGE parameter of the function module GUI_UPLOAD.
aRs

Unable to load German characters in NON Unicode Essbase Cube

Hi Guys,
This is what we want to do:
Build a Cube for Germany on our Essbase server in US. Our users will access cube using Excel Add-In from Germany. But since the Essbase server is in US, system environment variable ESSLANG is set to English_UnitedStates.Latin1@Binary.
The version of Essbase we are using is 7.1.3.
What we tried & failed:
To load German characters from our dimension build Text file, we added a header: //ESS_LOCALE German_Germany.Latin1@Default
at the beginning of the dim build Text file hoping the rule file will understand that the file contains German characters & load it correctly. Then using EAS I load the dimensions using its corresponding rule file.
Essbase loads the dimensions correctly, with NO Error, but when it encounters German characters it Replaces it with a Question Mark "?"
Some of the German characters are:ß Ü ü Ö ö Ä ä Å Ä Ö
Lastly, the reason we do not want to build Unicode cube is because Excel Add-In will not work with Unicode cubes.
Its urgent. Please help.
Thanks.

The simple and easy way to check
non-unicode character sets are not supported on unicode system any longer. Am I right?
Transaction code i18N
Select
trouble shooting --> printing test --> smartforms --> multiple scripts, select your output device and see print preview. it will display all supported characters.
I guess, above information will be useful for closing the thread.
Regards,
SaiRam

Unable to Open unix file in UNICODE system which created NON-UNICODE system

Unable to Open unix file in UNICODE system which created in NON-UNICODE system
We have two SAP systems both are ECC6.0 but System 1 is NON-Unicode and System2 is Unicode system.
There is a common unix directory/folder for both system.
Our requirement is to create one file on unix common folder and write the data to file from system1 .
In system2 open the same file for appending mode to write the data .
The file in system 1 created with below sentence.
OPEN DATASET g_unix_file FOR OUTPUT IN TEXT MODE ENCODING UTF-8.
Now I have to append the data from system 2 to same file.
I have tried to used below statement in system 2 to open the file but sy-subrc value comes as '8'.
1> OPEN DATASET g_unix_file FOR APPENDING IN TEXT MODE ENCODING UTF-8.
2>OPEN DATASET g_unix_file FOR APPENDING IN legacy TEXT MODE CODE PAGE
cdp IGNORING CONVERSION ERRORS .
3>OPEN DATASET g_unix_file FOR APPENDING IN TEXT MODE ENCODING Default.
4>OPEN DATASET g_unix_file FOR APPENDING IN TEXT MODE ENCODING NON-UNICODE.
Tried out all the possibilities as per F1 help given for open dataset , but still there is problem with opn file in appending as well output mode.However the file successfully open in Input mode(Read).
Please advice suggestion to resolve this issue.
Thanks.

Messgae captured as 'Permission Denied". The program gets triggered with system user Id PPID.
How to check the security access of the User ID.

0CUSTOMER data from Unicode R/3 to Non-Unocode BW Error

Hi,
I am getting error data when extracting 0CUSTOMER_ATTR.
the error is similar to SDN Link: [Extraction from a unicode ERP to a non unicode BW|Extraction from a unicode ERP to a non unicode BW]
We don't have any Languages installed at present.
we are getting this error for Chinese char. In the above link there is a mention to do Initialization of SPRAS in INCLUDE ZXRSAU02. Can anyone explain this.
in the Table T002: SPRAS=ZH is set to Chinese; if we initialize to ZH how about other languages.
Please Suggest.
Thanks,
Joseph M

Did anyone face similar issue...

Windows 8.1 Pro Non-Unicode Issue: CS6 Standard

I use WIndows 8.1 Pro English, I installed the CS6 Standard in Spanish, I changed the language for the non-unicode programs to spanish but still cannot use the Illustrator, I am having issue only with the Illustrator, noting that in the installation I was prompt for Spanish(Latin America) or Just Spanish, I clicked on Spanish(Latin America), but in the non-Unicode languages there is no Spanish(non-Unicode) they have Spanish per countries.

I have the same problem did you manage to find the solution? is impossible to contact adobe helpers, they just hide all contact

Gettin data from SAP R/3 4.7 unicode sys to SAP ERP non-unicode sys via RFC

We are trying to get data from SAP R/3 4.7 unicode sys to SAP ERP non-unicode sys via RFC. We are reading field from the database via FM and this field got converted by SAP standard Method (CL_ABAP_CONTAINER_UTILITIES=>fill_CONTAINER_C) from structure. When reading this field from ERP sys and converted back to structure using SAP standard Method the value is un-accurate, and different(blank) giving values.
How, if the data originally was a char or numeric it works fine, but not for decimal.
best regards,
Abu-Qaht

I have a range fields with different type of ranges, am saving these to the database by converting them to a string via the same method. I got the same problem so I tried to convert the string to xstring using function SCMS_STRING_TO_XSTRING, before send it to the other system, but the function raised an exception: CX_SY_CONVERSION_CODEPAGE

Post-process after the upgrade to non-Unicode

Hello all,
I'm doing a CU&UC and just completed the first part - non-Unicode.
Since it will be followed immediately by a Unicode conversion, do you really need to do all the post-upgrade tasks? And if not, which are the mandatory part?
Thanks again,
Terry

You can take the CU&UC Guide..... after upgrade and before unicode it's mandatory to do some steps, aall about unicode preparation.....after do it you can do the export....
Has you begun this????.
Regards,
Alfredo.

RFC destination definition with non-unicode external program

Hello All,
we have one issue with our RFID system connecting to WM system (SWD).
For most functions, external RFID server/middleware makes RFC call to SAP system. Means, from outside system to inside SAP. This seems to be working fine.
But in one case, SAP needs to print label to RFID printer. In this case, SAP is calling external RFID server/middleware using RFC destination. Means, from inside SAP to outside system. This is failing.
We think this has something to do with ECC60 being unicode system, and the RFC destination setup. We define rfc destination "ZRFID_SSI" in SM59. We define it same way as in as-is SSI 4.6B production system. But in SWD ECC60 system, SM59 has more options. We define as 'non-unicode' because target RFID server/middleware is non-unicode Windows server. RFC destination is actually working ok.
To send label to printer, SWD calls function ZFSSIRF202 with remote destination ZRFID_SSI. Listener on RFID server/middleware will respond to function call. This also seems to be working. But then, RFID server/middleware cannot process the data from ZFSSIRF202, log says that data is "0". (Actually, the first time SWD calls, log says 0 data, the 2nd time there is connection failure, the 3rd time it is 0 data, 4th time connection failure, etc, etc.)
Compared with production environment, everything is the same, except that SAP is unicode system. So, our suspicion is, that when ECC60 system sends data, it is encoded somewhat a little different than when SAP 46B system sends data. I have similar experience with our other interface (XSI), also involving RFC desintion, but XML file exchange. Here, ECC60 is encoding XML file with UTF-16, but SAP46B was encoding with UTF-8.
Anyone know how to help ?

Hi Jeongbae,
as of NW 7.0 EhP2, it is possible to directly set the code page in SM59.
In earlier releases, this is not possible.
In general, SAP systems use the logon language (SY-LANGU) to determine the code page, if this is available.
Please check SAP note 788239.
Please also have a look at SAP note 991572 for possible alternative settings, if SY-LANGU is not available.
In addition I would recommend to have a look at SAP note 1021459.
However in order to analyze the problem properly, you need to know the exact short dump text (via rfc trace).
For XML processing, please read SAP note 1017101. UTF-16 should NOT be used in an XML file !
Best regards,
Nils Buerckel
SAP AG

RFC Destination - Unicode / non - Unicode behavior

Hi All,
In our current production system the RFC destination from R3 to Xi is non-unicode.We have currently 300 Interfaces running using this RFC destination in production.
In few upcoming requirements for some 15 Interfaces some special characters will come from R3 to Xi system.In this case we need a unicode RFC Destination.
I have a query here , can i go ahead and change the existing RFC destination to Unicode or is it suggestible to create a new RFC destination only for these 15 Interfaces?
Need expert advice on this?
<<Text removed>>
Regards,
RK
Edited by: Matt on Oct 5, 2011 9:38 AM

Hello,
The Non-Unicode Single code page systems are supported by SAP for older applications for historical reasons - unicode was not available when they were released. These systems are restricted to only processing characters from their specific code page. This means their can be restrictions if they need to support language combinations that span multiple code pages - basically it is not possible. In addition some languages are not fully available at all for single code page systems like Thai. In addition the Euro symbol is not available.
Unicode is the future for all applications - SAP or otherwise. The significance at the moment is where customers who needs to convert to unicode to support additional business requirements like additional languages. Converting a system, although a simple process is not a trivial process in terms of time and resources.
So u can go ahead and change the existing RFC destination to Unicode .it will not create any prob. for other interfaces which are using non unicode setting.
Regards
Monica

Client Copy between unicode system and non-unicode system

Hello,
we have to build up a new system for japan. It is planned to install a new 4.7Ext200 unicode system and then make a client copy from a non-unicode 4.7Ext200 (language= german, english) system to the unicode system. I don't think that this is possible way, but I can't find information regarding client copies from non-unicode to unicode. I would advice the project to convert the existing non-unicode system to unicode, make a system copy for the new system and then install japan languages. Any information, which can help me.
Regards,
Alexander

Hi,
without conversion client copy is not possible
look at following
Re: Client copy between unicode and Non-unicode
regards,
kaushal

How to use non-Unicode mode in VB6 with ADO.

I'm using ADO on top of OraOLEDB to connect to Oracle 9.2. The database characterset is AL32UTF8. Since my client can't handle Unicode characters, I need a character conversion. However, arcording to the OraOLEDB document( which can be obtained here http://download-west.oracle.com/docs/cd/B10501_01/win.920/a95498/using.htm#1010255):
"How Oracle Unicode Support Works
OraOLEDB works in two modes, Unicode mode and non-Unicode mode. When the client character set is not a superset of
the server character set, OraOLEDB automatically enables the Unicode mode. In this mode, OraOLEDB stores the data in its cache in the UCS2 encoding scheme. The user should ensure that the database's character set is UTF8 in order to prevent any data loss.
If the client character set is a superset of the server's, the provider operates in the non-Unicode mode. This mode provides slightly better performance as it does not have to deal with larger character buffers required by the UCS2 encoding."
My client can only use NLS_LANG VN8VN3, which is NOT a superset of AL32UTF8, so "OraOLEDB automatically enables the Unicode mode". So if I code like this:
Text1.Font="Some Vietnamese Font"
Text1.Text= rs1.Fields("Name").Value
the display is bad ('?' all over the place). This is because rs1.Fields("Name").Type is adVarWChar, so rs1.Fields("Name").Value is encoded in UCS2. What I need is to make rs1.Fields("Name").Type is adVarChar, but it seems to be impossible since Field.Type is readonly.
When I use MS provider for Oracle, I found out that rs1.Fields("Name").Type is adVarChar, so Oracle do the conversion from/to AL32UTF8 (database character set) and VN8VN3(NLS_LANG) for me.
Since I use LOB and things that MS does not support, I want to use OraOLEDB, so anyone can help me out? It's ugent.
I can see that some 3rd program like SQLNavigator4.3 work well with NLS_LANG = VN3VN8 and DATABASE_CHARACTERSET=AL32UTF8 (i.e the program convert between the 2 characterset).
Please correct me if I misunderstood anything.
I need this ugently. Any help would be appreciated. If I don't make myself clear enough, please let me know.
Thanks in advance.

Thank you for your reply. I started to think that everybody is out on holidays...
The Oracle9i Client version is 9.2.0.1.0
Oracle Provider for OLEDB version is 9.2.0.4.0
Oracle Net version is 9.2.0.1.0, in case you need it.
The Oracle9i Database version is 9.2.0.1.0
But I don't think it is a version problem, is it?

Urgent: Installing SolMan 4.0 Non-Unicode - Kernel DVD trouble

Hi all,
I have a problem here with the Kernel DVD's.. I am installing SolMan 4.0 non-unicode on Solaris 10/Oracle 10. When I am asked to provide a path to "Kernel NW04sSR1" media, I provide the path to media number 51032262 (SAP NW2004S SR2) which is the closest I get.. On this DVD, there is a folder called KN_SOLARIS_SPARC with contains a LABEL.ASC like this:
<b>"SAP:AKK:700:UKERNEL:SAP Unicode Kernel 700:SOLARIS_SPARC:CD51030xxx"</b>
The label that is requested by SAPinst is "SAP:AKK:700:UKERNEL::SOLARIS_SPARC:"
Is this not the correct DVD that I am providing?
Please help!
Best Regards,
Thomas Kjelsrud

Hi,
I have the 51032263 DVD, which contains both the unicode and non-unicode kernel.
We have decided to go with a unicode installation of SolMan 4.0, but still I am having the problem with SAPInst requesting the Kernel NW04sSR1 DVD.. In my DVD-kit I only have NW04sSR2 kernel DVD.
When I try to specify the exact CD (KU_SOLARIS_SPARC) within the DVD I get this message: "You entered /tmp/d510302263/KU_SOLARIS_SPARC Unable to find a LABEL:ASC at location >< (Look for label SAP:AKK:700:UKERNEL::SOLARIS:SPACR:"
Please help, who can I contact as SAP with this issue?
Regards,
Thomas

How to setup the connection between non-unicode client and unicode server?

hi.
we played the program in 4.6x that call a data from unicode server (ECC6.0) to non-unicode server. ( not played in the unicode server.)
When a program ended that English Character was normal, but Korean Chinease... was unknown text.
I think conversion from unicode to non-unicode is a main reason.
General Notes are issued for the unicode side rfc connection configuration.
but, i want to know how to setup into the non-unicode system to interface with unicode system.
I hope your great answer.

Hi,
For taht you have to deploy korean and chinese langauges seprately on non unicode system.Then try to connect to the unicode system.It will work for you.
Regadrs
Vijay kumar

Scanning files for non-unicode characters.

Question: I have a web application that allows users to take data, enter it into a webapp, and generate an xml file on the servers filesystem containing the entered data. The code to this application cannot be altered (outside vendor). I have a second webapp, written by yours truly, that has to parse through these xml files to build a dataset used elsewhere.
Unfortunately I'm having a serious problem. Many of the web applications users are apparently cutting and pasting their information from other sources (frequently MS Word) and in the process are embedding non-unicode characters in the XML files. When my application attempts to open these files (using DocumentBuilder), I get a SAXParseException "Document root element is missing".
I'm sure others have run into this sort of thing, so I'm trying to figure out the best way to tackle this problem. Obviously I'm going to have to start pre-scanning the files for invalid characters, but finding an efficient method for doing so has proven to be a challenge. I can load the file into a String array and search it character per character, but that is both extremely slow (we're talking thousands of LONG XML files), and would require that I predefine the invalid characters (so anything new would slip through).
I'm hoping there's a faster, easier way to do this that I'm just not familiar with or have found elsewhere.

require that I predefine the invalid charactersThis isn't hard to do and it isn't subject to change. The XML recommendation tells you here exactly what characters are valid in XML documents.
However if your problems extend to the sort of case where users paste code including the "&" character into a text node without escaping it properly, or they drop in MS Word "smart quotes" in the incorrect encoding, then I think you'll just have to face up to the fact that allowing naive users to generate uncontrolled wannabe-XML documents is not really a viable idea.

Non Unicode R3 to non Unicode BI

Similar Messages

Maybe you are looking for