Non-Warranty Software Upgrade

Is anyone else suprised about linksys charging for out-of-warranty firmware upgrades that offers a fix for user logins to change router settings?

http://www.apple.com/osx/uptodate/

Similar Messages

  • Epson Workforce 845 will not print after IPad software upgraded

    All worked well before I upgraded my Ipad2 software yesterday.  No longer prints.  Message when I press print says it is searching for an AirPrint printed, and finds none on my network.  Nothing has changed except the software upgrade.  hat must I do?

    Thanks...other computers on the wireless network continue to work well.  The Epson Workforce 845 is an approved printer on AirPrint.  Trying to find a printer setup screen on the iPad without success.  When I bought the new wireless printer, it worked right out of the box with the iPad.
    I am tempted to restore the software to the original factory settings through iTunes but fear losing everything that has been added since I got it.  A disclaimer on iTunes says I can back all up, and later reinstall after I reset to original factory settings, but I am skeptical.  Any experience in this area?

  • Msi X320 not recognizing hdd..after software upgrade

    Well i got this like new x320 that was given to me after a failed software upgrade...it no longer shows any hard drive present...i have changed the hdd thinking that could be the problem...still shows nothing...can it be a corrupted bios?...or did somehow the software upgrade remove the info....any help will be greatly appreciated..trying to make this work for my mother's birthday....God Bless John

    Well this is long out of warranty...i did not think of the F3...thank you i will try that....God Bless really appreciate it...John....i got this second hand and i think they tried to upgrade the software...it does not show any hdd...no matter if i change it or not...i thought about using a hdd thru a usb...i will try and let you know what i find out...

  • CIFS AO down after software upgrade

    Hi all,
    i'm currently starting software upgrade procedure in my WAAS environment.
    I'm upgrading from 4.1.5b to 4.2.3c
    after rebooting my WAE's i'm having the following alarm:
    Critical Alarms:
            Alarm ID                 Module/Submodule               Instance
       1 cifs_ao_down              wafs                         WAFS
    Major Alarms:
    None
    Minor Alarms:
    None
    nkrwa222#sh licens
    License Name   Status      Activation Date Activated By
    Transport      active      06/22/2010      guf
    Enterprise     not active
    Video          not active
    nkrwa222#
    However even if i start the CIFS Accelerator the alarm still persists.
    nkrwa222(config)#accelerator cifs ena
    Enabled windows-print accelerator
    Enabled cifs accelerator
    WARNING: Accelerator doesn't optimize the traffic until license is configured.
    It takes up to 2 minutes to start the traffic optimization after the license is activated.
    nkrwa222(config)#
    nkrwa222(config)#
    I'm running no application accelerator cause i'm using transport license. And so i do not really need CIFS AO however i need to clear the alarm especially on CM.
    Any ideas how i can fix this?
    thanks for your input

    Dieter,
    Correct, you can not enable any accelerators if you only have the Transport license.
    I'd suggest you execute the following commands to see if the alarm clears.
    pdi-7341-19(config)#no wafs edge enable
    pdi-7341-19(config)#no wafs core enable
    pdi-7341-19(config)#no accelerator cifs enable
    Regards,
    Mike Korenbaum
    Cisco WAAS PDI Help Desk
    http://www.cisco.com/go/pdihelpdesk

  • 1.1.4 Firmware with Software Upgrade: Am I Jailbroken?

    OK. So my Touch is now running 1.1.4 Firmware with the Software Upgrade. According to MacRumours, I am now jailbroken:
    http://www.macrumors.com/2008/02/26/apple-releases-firmware-1-1-4-for-iphone-and -ipod-touch/
    Is this correct? And if so, does this mean I can run 3rd Party Apps NOW, without invalidating the warranty?

    no you are not jailbroken. what i believe the article is saying is that if you were jailbroken prior to the update, you would then be 'un-jailbroken' after you updated. as for the third party apps, the article is speculating that this update will support third party apps....but we are not allowed to speculate in here...but i think that's what the article is saying
    B

  • ASA5510-BUN-K9 software upgrade from 7.0(4)12 ??

    I just purchased this firewall from govconnection.com and wondering about software upgrades. It has above ASA version software and ASDM 5.0(4) software.
    It appears I need to somehow attain PICA and verification keys and whatnot - I've inquired with my seller to see if they can provide that -
    but also curious if the newer version of software is desireable enough to jump through all these hoops? Or perhaps I'm missing some simpler method of updating software on this unit?

    Hi,
    Basically, if you just buy an ASA (or any Cisco box) without purchasing any support then you get what's called "warranty", which entitles you (usually) to 90 days of hardware support and software maintenance updates.
    Unlike IOS, it's not too well documented what qualifies as a maintenance update on ASA but it's probably only the latest build of 7.0(4) if your box came with 7.0(4). Within 90 days the hardware replacement SLA is 10 days - after 90 days it's time & materials at Cisco's discretion.
    The point I'm trying to make is that Cisco's warranty is rubbish - you're more or less forced into buying smartnet whether you like it or not (unless you're in the habit of discarding failed hardware and simply replacing with a handy spare..)
    That said, smartnet has fantastic value, as follows:
    1) new hardware delivered with or without an engineer (up to 24x7x2)
    2) a license to install any and all software updates (for your purchased feature set)
    3) Access to the TAC 24x7
    Here's the full list:
    http://www.cisco.com/application/pdf/en/us/guest/products/ps2978/c1592/cdccont_0900aecd8042b4d6.pdf
    So, whenever you buy Cisco kit you should always be thinking about buying a smartnet contract (there are separate services to cover IPS devices, and software-only products like callmanager) unless you only want it for 90 days and you don't care about the 10 day warranty replacement SLA.
    Finally, if you really don't want the hardware support, but you do want the software, then you can simply purchase the particular version you want for a one-off payment (but it won't be very cost-effective if you upgrade a lot - and a years smartnet contract might even be cheaper..)
    HTH - plz rate if useful.
    Andrew.

  • Why bother with the software upgrade BT ?

    I've still got the old silver BTVision box, I've had it since launch which is quite a few years I can tell you !!. At the start the software was very dodgy, even watching TV had its problems. After some very overdue software upgrades the box now runs as sweet as a nut.
    My question is, with the new HD Youview box on the horizon (which I will be getting day one), why bother upsetting the applecart ??. The old boxes are running fine so why introduce a new slow, buggy UI to a platform that is on its way out ?. What is BT trying to achieve here apart from forcing an upgrade on people that apparently doesnt provide any extra features and wipes all of your recordings ?.

    minusdot wrote:
    StewM wrote:
    The new software is still in testing mode at this time. Hopefully by the time it is fully launched the bugs will be fixed and the features added back.
    If it's in use by non-beta testing customers, as it appears to be, then it is not in "testing mode". Can I stick with the old look please!
    And yet you want multi-room. Which one cannot have on the WinCE platform as it has no flexibility. But the new platform will, eventually.
    Rank - Mostly Harmless.

  • Warranty Serivce Upgrade - Which One

    I am looking at the Warranty Service Upgrade and have a few questions.
    1. Looks like the T61 come with a base warranty: 1 Year Depot/Express Warranty
    a. What does this actually cover?
    2. We are considering a 3 year full warranty: 3 Year EasyServ + 3 Year ThinkPad Protection for 1 Year EasyServ ThinkPad
    a. What exactly is EasyServ?
    b. What does 3 Year ThinkPad Protection for 1 Year EasyServ ThinkPad mean?
    3. Is there a URL that describes in full the meaning of the warranties? At the moment, "help me decide" is not that helpful.

    Thanks for your comments.
    i've two questions.
    **my macbook pro model is:
    Model Name: MacBook Pro
    Model Identifier: MacBookPro4,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.4 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 3 MB
    Memory: 2 GB
    Bus Speed: 800 MHz
    Boot ROM Version: MBP41.00C1.B03
    SMC Version (system): 1.27f2
    and in the memory it shows this info: [from system profiler]
    Memory Slots:
    BANK 0/DIMM0:
    Size: 1 GB
    Type: DDR2 SDRAM
    Speed: 667 MHz
    Status: OK
    Manufacturer: 0xCE00000000000000
    Part Number: 0x4D342037305432393533455A332D43453620
    Serial Number: 0x762E7C8E
    BANK 1/DIMM1:
    Size: 1 GB
    Type: DDR2 SDRAM
    Speed: 667 MHz
    Status: OK
    Manufacturer: 0xCE00000000000000
    Part Number: 0x4D342037305432393533455A332D43453620
    Serial Number: 0x762E7E2C
    -------------my questions----
    1. from what it shows that currently they've put 1GB RAM in each of the 2 slots [i wonder why not a single 2GB in one slot while other is empty, however this is not my question] .. can i upgrade it to 3GB by just purchasing a 2GB ram for now? meaning, in one slot i'll let the 1GB remain, and in other, i'll replace the 1GB with the 2GB that i intend to purchase. will it work?
    2. if the answer to the above is yes, can i go for this particular RAM? is it compatible with my model? http://www.ramjet.com/ItemDescription.asp?Item=MBKS2G
    ** 2GB SO-DIMM for MacBook Pro Core2 Duo
    PC2-5300, DDR2-667, 667Mhz, Latency 5-5-5, Non-ECC, Unbuffered, 1.8V, 200pin SO-DIMM
    This kit contains one (1) 2GB module and is specifically designed and SPD configured for the MacBook Pro Core2 Duo running 667Mhz memory.
    in future how shud i refer my model to others, is it late 2008? i know its not unibody.
    thanks for your replies..
    Message was edited by: pranay

  • Why can't I buy the 2.2 software upgrade without a credit card?

    I don't understand why I need a credit card to buy the 2.2 software upgrade for the iPod touch. Can someone please explain why?

    From the Terms of Sale from the Canadian iTunes Store:
    http://www.apple.com/legal/itunes/ca/sales.html
    +iTUNES CARDS+
    +iTunes Cards are for transactions on the iTunes Store only. iTunes Cards may not be used for gifts, or purchases on the Apple Online Store or in Apple Retail Stores. iTunes Cards are non-refundable. iTunes Cards may not be used to purchase Gift Certificates, Monthly Allowances, Apps, or other iTunes Cards. iTunes Cards may not be used to purchase software, games, or apps.+
    So, it is on the website. It's probably in the EULA you had to agree to. However, most people just click through.

  • Nokia 6700C Software Upgrade

    I upgraded my Nokia 6700C last week using NSU to;
    V13.20
    28-07-10
    RM-470
    Ever since then the phone goes into standby camera mode overnight. The phone is in a case with the keys locked and it is not possible that the camera mode is accidentally being turned on.
    Any ideas please what this could be? I've searched all the settings and can't see anything related and the phone is over 12 months old and has never done this prior to the software upgrade.
    Is it a setting I can turn off or how do I go back to a previous software version please?

    Hi first of all software upgrade cannot be downgraded. If you can't solve the problem then try to reinstall the software or just give it to Nokia Care. They'll charge some amount for this process if your phone is not under warranty.
    Thank you.
    -------------------If this post helped you, click on accept as solution.------------------
    -----------------------------Appreciate by clicking on white star.----------------------------

  • N80 Software Upgrade

    Last November I bought a N80 from Carphone Warehouse in the UK. Two days after puchase I returned to my home in the Canary Islands (Spain) and attempted to upgrade the software. My PC crashed leaving the N80 with a blank screen and inoperable. I took the phone to a Club Nokia dealer who informaed me that the UK warranty was void in the Canaries (part of Spain and the EU) and was a model only intended for the market in the USA and Israel and therefore could not be repaired under warranty.(It was the black version) I was then told it needed a new screen which would cost more than the phone! I took it to a second dealer via Phone House(same company as Carphone in the UK) and they told me the same thing. Eventually I posted the phone back to the Uk to a friend who took it to a local branch of Carphone and it was repaired under warranty (apparently only a software upgrade needed). I now have the phone back and it still has outdated software and I would like the upgrade as battery life is dreadful, but I am now very reluctant to do this via my PC after what happened last time!
    Is the software download process reliable. MY PC has never crashed in this way before and I am concered that it was the N80 that caused the problem. Any advice please?
    I was also concerned about the lack of support and help that I eceived from Nokia when I called them. They could only suggest that I flew back to the UK to get it repaired!
    Barry

    I don't recall anyone else complaining that NSU (the part of PC Suite that updates the phone software) crashes their PC, but it is always possible that your PC has some other software installed that is causing the problem.
    If however, your only reason for wanting an upgrade is that you believe it will improve battery life, then I don't think I would risk the upgrade again: I don't recall anyone saying it made any difference. Having said that, there are many other reasons you might want the latest firmware.
    Re the battery issue, here's my list of things you can do to save battery on the N80 - I guess the list will be pretty similar for all of the N- and E-series phones:
    - turn off bluetooth when not in use
    - set Network mode to GSM only
    - set Wireless LAN Show Availability to Never
    - set Sleep mode on
    - reduce the screen brightness
    - reduce the power saver time out time
    - reduce the light time out time
    Note that I have tried all of these and still my phone regularly runs out of battery after a mere 12 hours - but then I do use it a lot. The safest option is therefore "get chargers for work / home / car etc and possibly a spare battery".Message Edited by patc on 30-Mar-200712:29 PM

  • Software Upgrade Option not working

    After I installed the Mac OS X Snow Leopard (V. 10.6) upgrade (previously I had the Mac OS X 10.5.4), the Software Upgrade option doesn't work anymore. Actually, the available upgrades are recognized when I choose Show Details in the first screen (itunes 9.0.1 and upgrade of Mac OS X to 10.6.1). But when I choose to Install Items, even though the License Agreement screens appear, I choose the Agree option and then it returns to the first screen (Hide/Show Details - Not Now - Next). It seems like the software install option enters into a loop and never starts the installation.
    I appreciate if you can help me fixing this problem

    Have your tried to install anything else without success? Are you using a non-standard keyboard. If yes to both, then Set your keyboard to the standard US layout if not already done. Then, delete this file: /users/username/Library/Preferences/ByHost/com.apple.HIToolbox. Next, log out and back in. Then try installing whatever you have been having problems with.

  • My FaceTime with the new software upgrade is not working

    My FaceTime with the new software upgrade is not working.how do I fix this

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • So what kind of hardware and software upgrades can i get to beef up my macbook?

    i'm talking ugrade to eight gigs of RAM, dragon dictate, any video cards? i want this thing to last me for like 20 years. maybe boot camp it so i could run TOR on the windows side. and when you answer, please keep it simple cause i don't know TOO much about this stuff

    The only upgradable hardware in a MBP is RAM and HDD/SSD.  But neither upgrade done by you will void the warranty unless you are extremely clumsy and break something in the process ... but that is not very common.
    Some even replace the optical drive with a second hard drive, but Apple frowns upon that and void call that system "out of warranty".  But if your system is 5 years old and beyond any warranty, it s your call.
    All else is soldered to the logic board.
    2011/2012 MBPs can upgrde memory tpo 16 GB (although 16 GB memory is still $250).  8 GB is only $50, though.
    BootCamp does not necessarily need more memory, since only one or the other is running at any time.  But if you want to use Windes in a VM (virtual machine, such as VirtualBox, Parallels or VMWare  Fusion) more memory is always better since both OSs will need memory.
    Software upgrades are limited only by available packages, and come in a variety of types.  You would need to specify software you want to use.
    BUT
    You said "last for 20 years".  Several people have kept running applications designed fro the PPC (PowerPC) chipset, and which had a support software called "Rosetta" that run up through Snow Leoapard.  Rosetta is now defunct in Lion and beyond.  In short, software compatibility will likely fall off so eventually you will need to buy new software.

  • Phone not working after the software upgrade

    I performed the software upgrade as indicated by the phone in the notifications.
    One the phone rebooted, I proceeded to enter my email accounts and it froze on a white screen with a spinning wheel.
    I rebooted and it continued to freeze.
    I took the battery out, rebooted, still can't add email accounts.  It freezes in the setting section.  I actually can't change any settings.
    If I reply to a text, the screen freezes black.
    If I try to reply to an email, the screen says, "Could not display this message"
    I have wiped it three times, powered off a billion times and still keeps freezing.  The update has been nothing but grief. 
    Any advice??

    Hello 2canoes and welcome to the BlackBerry Support Community Forums.
    Sorry to hear you're experiencing issues with your device after updating your software.
    It's recommended you contact your mobile service provider for investigation on this matter and to open a support ticket with BlackBerry technical support.
    Thanks!
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Maybe you are looking for

  • Worst customer support experience!

    I bought a brand new Toshiba 40" (40FT2U) in January 2012.  On April 4, it died.  Toshiba reports that it is a failed Mainboard and would arrange for someone to replace the bad part.  As of April 16, the part is still on back order and there is no et

  • Please help? Why has my iTunes account been disabled?

    Just today, when i went on my macbook pro to purchase the new shinedown album, a box popped up that said, "your Apple ID has been disabled". I tried purchasing it many times, but the same message. Also, i trired buying this on my ipod touch and on my

  • Using Airport Express to Communicate a Mac & a PC

    Hi, I have a MacBook, a Vista PC Laptop and an Airport Express (AE) 802.11n. I already had a wireless router and connected my AE to "join an existing wireless network". Since my wireless modem is on the other end of the room, and my AE is on the othe

  • Starting http server ...........timeout

    Hi, We have JES6 installed running for more than year now. Now we get following error, when starting cal server. Starting http server ............................................................... timeout debug log is as follows, [06/Jul/2008:12:33:

  • Where is RegDataGen directory?

    Hi, I'm using B1DE 2.0 to build an add-on for SAP B1 2007A SP01 using VS2008 on Vista SP2. To create an installer for my add-on, I choose: New Project > Visual Basic > SAP B1 AddOnInstaller .NET Wizard. Then, I have a configuration window with the fo