Non-zero rule for figuring out the interior of a shape

I need help in understanding how the non-zero rule works in figuring out the interior of a shape? Can anybody give a simple example? The winding rule is set by the PathIterator...WIND_NON_ZERO.

Do you have a Java question?
We can't really answer general questions like that, except to point you towards google.
If you have some Java code you're working with, post an [SSCCE |http://sscce.org] that demonstrates where you're stuck, and be specific with your questions.

Similar Messages

TS2446 I can not purchase on ITunes for the first time because I forgot the answer to my security questions, is there a way I can log into my account and figure out the awensers to the questions?

I can not purchase on ITunes for the first time because I forgot the answer to my security questions, is there a way I can log into my account and figure out the awensers to the questions?

Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities

I need help figuring out the best way to convert analogue video to DV so that I can edit it.

I have a large number of VHS and hi8 tapes that I want to convert to high quality DV.
I have a couple of options. One is an Elgado Video capture system.
The other is a Sony Digital Media Converter Box (DVMC-DA2).
I have tried a few of the less important tapes using the Elgado Video Capture system. It only allows you to convert to MPEG4 or H.268. It is not very good quality, especially for archival items or items I would later wish to edit.
I also have the Sony Digital Media Converter Box. I have heard that this is a superior option. So far, though, I have only been able to figure out how to import using an old version of iMovie HD. This makes a large imovie project file (approximately 6.18GB for a 28:30 clip vs a 348.9MB for an MPEG4 using delgado.
On top of that to convert the file from an iMovieProject file to DV is an additional step that so far looks like will take a half an hour at best.
Is there any way for me to import VHS/hi8 tapes using the Digital Media Converter Box to creat high quality DV files directly? If so, where can I find this info? What steps should I take and what are the settings I should use.
I have a lot of tapes so I want to figure out the right and most efficient way to do this because I will be repeating it a bunch of times and would hate to have to start over again.
I should also mention that I am using a Mid 2010 MacBook Pro, with OSX 10.9.1
I'm sorry in advance if this seems like an obvious question, but I have been googling and looking at tutorials on the site and just have not found the answer. There are a lot of ads for expensive low quality services to do this converting for you, so maybe the answer I am looking for is burried in all that advertising.
Thanks

Thanks Biggles and Gotz. I just couldint find capture, but now I can! (It was right under my nose too).
I'm trying it now and it appears to be working. Do you have any other recommendations for capturing from hi8 video source as far as setting go? I am using DV to capture. Are there any other settings I should pay attention to?
There is an extra line of video noise at the bottom, but when I google it, it sounds like it won't show on most standard tvs and if I want to fix it for online, that I should mask it after the fact vs scaling up the video.

Is there a way to dynamically figure out the FIRSTROW & LASTROW using Bulk Insert?

I noticed most of my files follow a certain convention, so I can use Bulk Insert with this:
FIRSTROW = 2, LASTROW = 224
However a few files have many more records. I'd like SQL Server to dynamically figure out the first and last rows with data, but I don't know if that's possible. Can someone confirm?
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Nope, you would need read the files from some program. Could be a CLR stored procedure if you want to do it from SQL Server. But from BULK INSERT alone, no.
Erland Sommarskog, SQL Server MVP, [email protected]

I am moving from Southern California to Maui, Hawaii and I need to figure out the best way to get my 24 inch iMac across the ocean. Does anyone know the best way to do this?

I am moving from Southern California to Maui, Hawaii and I need to figure out the best way to get my 24 inch iMac across the ocean. Does anyone know the best way to do this? I have found GearGrip's LCD harness so that I can do carry-on onto the plane... Or maybe use a Pelican Case to do it as a "checked bag"? Or any other suggestions??! Please help!
Thanks so much!!

I don't recommend you send the iMac in a checked bag. Might get damaged.
Check the airlines website for carry on guidelines.
Or, if you have the original box that the iMac came in, if you have someone who can pick up the iMac for you, send it ahead Fed Ex and insure the package.
Just make sure the display is covered to protect it. A blanket perhaps.
Aloha ...

Unable to figure out the classnotfoundException

Dear Members,
I have an applet on which I want to show images. I have put .class and .html in the same directory and the images in the images directory.
I'm usong Tomcat 5.5.4.
Note: I have created certificates and also policy files for the applet.
When I run the same code using eclipse, the code is working fine.
And when I try to run in the browser its throwing the following Exceptions.
java.lang.NoClassDefFoundError: AdminApplet1$1
     at AdminApplet1.init(AdminApplet1.java:74)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source) Where AdminApplet1 is my applet.
Following is the code written in the .html
<applet codebase="http://localhost:8080/project/"
        code="AdminApplet1"
        archive="SAdminApplet1.jar"
        height=400
        width=600 >
</applet>where SAdminApplet1.jar is signed jar.
I'm trying to figure out the problem since last 2 days. If you want more details about the problem please let me know.
I have referred http://java.sun.com/developer/technicalArticles/Security/Signed/
for creating the certificates
If you think I've gone wrong while creating the certificate then please show me a way.
I'm looking forward for the helping hands.
Thanks.

Please put all the class files in the jar.
Considor this example:
import java.applet.*;
public class test extends Applet {
     public void start() {
          System.out.println("this is start");
          try{
               System.out.println(System.getProperty("java.version"));
               (new subTest()).printSomething();
          }catch(Exception e){
               e.printStackTrace();
     public void init(){
          System.out.println("this is init");
     class subTest{
          void printSomething(){
               System.out.println("something");
}compiling with javac test.java gives me:
test.class
test$subTest.class
When I remove test$subTest.class and open the applet with a html page I get:
java.lang.NoClassDefFoundError: test$subTest
(looks familiar?)

HT204053 Help me figure out the restrictions passcode

Help me figure out the restrictions passcode i need to get on to restrictions

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. iOS- Understanding passcodes
4. What to Do If You've Forgotten Your iPhone's Passcode
5. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
6. Restoring iPod touch after forgotten passcode
7. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
Restrictions Passcode Help
1. How to Recover Forgotten iPhone, iPad Restrictions Passcode

Help! I figured out the problem - sort of.

So I posted my problem two days ago. I found that only some of my pages were loading in Firefox 3. I didn't know why (see below for original posting).
With a little experimenting, I have found that republishing the pages that "work" actually causes them to no longer work. I'm pretty sure I published these pages that worked with previous versions of iWeb. Now that I'm using the latest version of iWeb, any new pages (blogs) cannot be viewed by Firefox 3.
Is there anyone out there with a work around? Solution? Anyone?
HERE IS THE ORIGINAL POST:
HELP- Take a look at my pages- What's wrong?
Posted: Nov 19, 2008 3:19 PM
Reply Email
Here are links to my pages: the first link doesn't load in Firefox 3. The second link loads fine. I can't figure out the difference between the two pages. Any web gurus out there that can determine my problem? I really want people using firefox to be able to view my site.
THANKS!!
LINK 1:
http://web.me.com/reeldamian/DAMIANDP.COMNYO/COMMERCIAL_REEL/COMMERCIALREEL.html
LINK 2:
http://web.me.com/reeldamian/DAMIANDP.COM_NYO/FX/FX.html
Message was edited by: 3pointer

I installed oracle apps 11.5.10.2 using steps given in thread and I didnt have any problems. I then installed it on my friends laptop and it worked fine. but recenly it stopped working in my laptop, i was not able to open login page from main url (http://www.msb.ora:8000) it gave error : page cannot be found
So i reinstalled it on fresh system again.. but since then it not working. I have tried atleast 9-10 times and everytime it ends up with same error "jsp is not responding", I am able to open the rapid install main page but I am not able to open login page. it says page cannot be found. i followed all the steps suggested by you guys in this thread to solve this error, but still have no luck.
I have tried following steps to solve the issue
1) As its recommended to installed apps on fressh os without jdk i did the same, as i didnt worked i tried installation with jdk preinstalled,
2) i have tried on both windows server 2003 and win xp professional
3) I tried to change the jdk path in jser.properties file
I will really appriciate any help to solve this problem. Below is system details:
os: windows server 2003
ram : 1gb
processor: 1.83ghz core 2 duo
Oracle apps 11.5.10.2
java version: 1.4.2_04 ( installed by rapidwiz)

Hi I would like to figure out the answers to my security questions, is this possible?

Hi I would like to figure out the answers to my security questions, is this possible.

Forgotten Security Questions / Answers...
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact
More Info > Apple ID: All about Apple ID security questions
Note:
You can only set up and/or change a Rescue Email Before you forget the questions/answers.

The screen of my MacBook Pro itself periodically switches the color. That is, with the usual colors, on some blue. What to do? Should be repaired, or you can figure out the most? HELP ME PLEASE!

The screen of my laptop itself periodically switches the color. That is, with the usual colors, on some blue. What to do? Should be repaired, or you can figure out the most? HELP ME PLEASE!

LambChops1,
I’m using Mavericks, and it’s still possible to select text to drag and for cutting and pasting. Left-clicking and right-clicking is still possible, too.
Try opening the Trackpad pane of System Preferences, and select the Point & Click tab. To right-click, ensure that your “Secondary click” checkbox has been checked; the small print under “Secondary click” is a dropdown menu which allows you to select the form of right-clicking that you prefer. (For instance, mine is set to “Click in bottom right corner”.) For left-clicking, is your “Tap to click” checkbox checked, or unchecked? (Mine is unchecked, since I prefer pushing for left-clicking over tapping to do so.)

How do I figure out the size of an image in my iPhoto. How do I know if it is Kilobytes or megabytes. I assume Megabytes are larger than kilobytes and gigabytes are largest.

How do I figure out the size of an image in my iPhoto. Soe applications require a certain size and I have no way of knowing what they are.
Please confirm that Kilobytes are smaller than megabytes and gigabytes are the largest.

You're correct, Kilobytes are smaller than megabytes and gigabytes are the largest.
When you attach the images to an email, look on the bottom line for the total size of the email. You can also change the image from Actual size to medium or small.

Help figuring out the next step

Credit card became invalid and so I needed to resign up. I created a different log in and pass word because I couldn't remember the original log in and pass. I have already paid for a new subscription and removed and redownloaded skype but when I try to use skype it says I need a subscription. I need help figuring out the next step because it won't let me skype to a mobile in Togo Africia and I have already paid for a new subscription with my new credit card. Help!! Donna

you can visit the link below for instructions on how to check the status of your current order;
https://support.skype.com/en/faq/FA288/what-is-the-status-of-my-order
if you need further assistance, you can also try to contact customer service. Just open the link pasted below to see the instructions on how to get in touch with customer service -
https://support.skype.com/en/faq/FA1170/how-can-i-contact-skype-customer-service
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES

I just bought a MAC and am trying to figure out the correct version

I just bought a MAC and am trying to figure out the correct version of LR4 to install on the Mac. Someone in support (LR) gave the link for the downloads, and I chose the LR4.4 (but, it said LR5---kind of confusing). I don't have a DVD drive, so I am not sure if this one will work. I have the LR icon that says Light Room 4.4 on the screen, but LR does not open when I click it.....????? How do I open this? Thanks!!!

I called my ISP to set it to Bridge mode and they said that they couldn't do that (Linksys help desk gave me instructions on the switch to Bridge mode). However, they then tried to upsell me their own wireless router for $79.99......
Can I make this change myself or do they need to do it from their end?
Thanks!

Is there a way to figure out the name behind an Apple ID?

Is there a way to figure out the name behind an Apple ID? My oganization uses an iPad as a kiosk. Somone accessed the iPad, changed the Apple ID associated with iTunes, downloaded a game and set a password to lock up the whole iPad. We had to completely restore the iPad in order to access it. When I tried to upload a new app, a different Apple ID popped up, and I'm assuming it was the person who locked the iPad and downloaded the game. I would like to figure out who owns that account, just so we can not allow that person access to the iPads anymore.
Is there a way to do this?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Perhaps with a court order because the person committed a criminal act. Otherwise it is doubtful that Apple would violate the privacy of a client/account holder just on your word.

How can i figure out the answers to my security questions if i forgot the answers

how can i figure out the answers to my security questions if i forgot the answers

Welcome to the Apple Community.
Start here, and reset your password, you will receive an email with your new password, then go tomanage your account > Password and Security and change your security questions.
If that doesn't help you might try contacting Apple through iTunes Store Support

Non-zero rule for figuring out the interior of a shape

Similar Messages

Maybe you are looking for