Noncumulative Cube Copy for Inventory IC where compression is not possible

Dear All
We have got Month (0RT_C37) and Week (0RT_C36) Inventory Infocubes. Compression has never been done on any of this cube. The data is fine and result is coming correct but output is very slow. We have done the initialization on this cube on mid of 2008. We have to copy the entire cube to a ZCube and do the compression performed on that Zcube. Our system is BW7.3 SP Level11 and we are going to upgrade to 7.4 .  We tried to move the marker values(RECORDTP=1) to the Zcube with DTP setting (Initial Non-cumulative for Non-cumulative values) which is not happening. But other values with movements we are able to move. The only OSS note found to address this issue is1426533 which is not relevant for us. Is there any workaround for the situation where no compression is ever happened on the cube and the compression is impossible due to some issues, hence we want to copy the entire data to another Zcube and perform the compression there.
Regards
Reshoi

Hi Reshoi,
There is no DSO for 2LIS_03_BF in Business Content as far as I know. It is possible to create a DSO yourself. Please review SAP Note 581778 - ODS capability of extractors from inventory management and the related SAP Notes carefully if you want to go into this direction.
Please have a look at the document Re-initialization of the Material Stocks/Movements cube (0IC_C03) with 2LIS_03_BF, 2LIS_03_BX and 2LIS_03_UM in BW 7.x for contains a step-by-step instruction and lots of valuable information.
Re. the downtime, there are ways to minimize it. Please see SAP Note 753654 - How can downtime be reduced for setup table update. You can dramatically reduce the downtime to distinguish between closed and open periods. The closed periods can be updated retrospectively.
Please refer to document How to Handle Inventory Management Scenarios in BW (NW2004) for an evaluation of different Inventory Management scenarios.
I also would like to recommend you to review SAP Note 419490 - Non-cumulatives: poor query performance for 5 performance tips.
Last but not least, you might want to have a look at the following SAP Notes:
SAP Note 436393 - Performance improvement for filling the setup tables;
SAP Note 602260 - Procedure for reconstructing data for BW.
Best regards,
Sander

Similar Messages

  • Error:-document is in transfer for purchase order..creation is not possible

    Hello,
    While doing confirmation of PO I am getting this error, saying "document is in transfer for purchase order..creation is not possible".
    can anyone please suggest me solution on this type of error?

    Hi,
    Is the PO in ORDERED status? Is there any confirmation posted for this PO which might be stuck (idoc failed to reach back end)?
    If it is a case of idoc failure, then reprocess the idoc and then do the next confirmation.
    regards,
    MRao

  • I have the new iphone and thought I could download Netflix but only found "Netflix Instant's  Best Movies" in the apps. I pay for Netflix monthly. Is it not possible to download it here and use it on the iPhone?

    I have the new iphone and thought I could download Netflix but only found "Netflix Instant's  Best Movies" in the apps. I pay for Netflix monthly. Is it not possible to download it here and use it on the iPhone? Insight appreciated.

    TJBUSMC1973 wrote:
    The iPhone is working, as designed and advertised.  In this case, the user failed to educate themselves properly, either by proper research or asking the right questions, before purchasing the device.
    I understand that the OP failed to do research. But then, I wasn't replying to the OP. I was replying to Chris. I have Verizon. I can talk and use data at the same time with my Droid Maxx. Therefore, the problem is not just with the network. It would be technically possible for an iPhone to do that on Verizon/Sprint if Apple had chosen to use a different chip, such as the kind other phone manufacturers have elected to use.
    Of course, this is probably all irrelevant to the OP's issue. It was merely a point of clarification, especially for those people who are used to being able to use both voice and data at the same time on Verizon. When they switch to an iPhone, they are often surprized at the limitation.
    Best of luck.

  • No grid values for PO 4500000002 00010; goods receipt not possible

    Dear Experts
    I have been configuring AFS, 1st I create Charactreristic for Size and Colour, 2nd assigned it in MM01. And create PR and PO. When I Goods receipt the following error occured.
    "" No grid values for PO 4500000002 00010; goods receipt not possible
    Message no. 8J658 ""
    But I can see the grid like the below mentioned in MIGO screen "Grid Value " field
    I have mentioned One size and three colours
    Grids like
             Size
    Grn       S
    Blu       S
    Yell      S
    Pls help me.
    Thanks
    Rajakumar.K

    In PO item level go to Delivery shcdule tab and over there you have to select the grid value
    Hope u clear

  • RC 3 M8 147 Account determination for Chart of Accounts._ WRX not possible

    Hi All,
    When I am confirming the Service Entry Sheet from SRM Front end for the ECPO replicated in the Backend following error is displayed:
    <b>RC 3 M8 147 Account determination for Chart of Accounts._ WRX not possible</b>
    How can I get the Service Entry Sheet Posted/Accepted...?
    Regards,
    Rounak

    Hi Rounak,
    Thank for ther reply , I have checked all the settings which u have mentioned.
    1)Account assignment -K
    2)Field  Status Group -Z001 i.e General
    3)In OBYC -Valuation Modifier has been mapped to the GR/IR-- GL account.
    A)the cost centre and the GL account has been mapped .
    Still i am getting the same error ,
    RC=     3  M8                   147 Account determination for entry RCL WRX 0001 not possible
    What more can we check in the FI-MM integration  ??
    The same combination is working fine for Asset purchases.
    wth rgds
    SVU123
    Edited by: svu123 on Jan 31, 2008 6:37 AM

  • Deploy of Essbase Cube from EPMA to Shared Services Project is not possible

    We cannot deploy Essbase Cubes to shared services projects. The projects are not selectable in the box in the deploy dialog. Help is urgently needed. Our version is 11.1.1.3.
    Many thanks
    Michael

    Hi,
    It looks like a known issue
    When deploying an Essbase application, the Shared Services project drop-down is not populated as expected. (8239445)
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How activate Camera Raw for Elements 11.Update button is not possible!!!

    Hi @all,
    i have Elements 11 and can not activate the update for Camara raw . At the moment is version 7.1 active.....but i need a higher version for my cameras. So what can i do now?

    I downloaded DNGConverter_7_4.exe but i have the same problem ....Element can not open the raw files of my camere because Camera raw 7.1 is active....how can i change it? Sorry for my bad english ....anybody here for german?

  • Reopening Scene Menu for DVD's with chapters is not possible

    Cannot reopen the scene menu after stopping play in a chapter and neither TV or DVD players help. How can I go back to scene menu direct without going through the main menu? Thanks for helping.

    dallasosborne
    You cannot do what you describe with a DVD-VIDEO with menu on DVD disc created in Premiere Elements (any version).
    The best that I can do, after I stop the playback of a scene midway into it, is to hit submenu to get be back to the
    main menu page and there hit Scene Selection to get to select another scene.
    Until proven otherwise, I do not believe it is possible for you to do what you describe with your Premiere Elements DVD-VIDEO disc menus.
    ATR
    Add On...I did not see SG's post until after I had posted mine.

  • New operation for production order - change operation quantity not possible

    Hello all,
    we want to create a new operation for a production order.
    So we go to CO02 and to the operation order overview screen.
    But when we add a new operation, the system will not let us determine the operation quantity for the new operation, the system will just take the quantity from the operation before.
    How can I determine the qty by myself?
    Thanks
    Anne

    You can do another way also.   You change your routing with new operation quantity and save it in CA02.    NOw you go to CO02 and read master data in funtions,  then the new operation quantity will definetly come in to the production order.
    KrishnamurtyDSS

  • New procedure for Inventory

    Hi
    I Defined one new output procedure by copying ME0001 for Inventory documents.
    Here my doubt is how can I activate this new procedure for this inventory
    Is it possible then how can I activate this
    nani

    hi
    here am asking to activate my procedure ZME001
    for inventory documents
    where i can do this.
    can u explain me in detail
    nani

  • Marker update for Inventory data sources

    Hi all,
    why we use marker update in Cube manage for inventory data sources at the time of loading?
    i heard that to avoid the keyfigures cumulation we do check that option ,is that correct/
    please clear my doubt
    thx

    HI
    (2LIS_03_BF Goods Movement From Inventory Management-------Unckeck the no marker update tab)
    (2LIS_03_BX Stock Initialization for Inventory Management--
    ---select the no marker update check box)
    2LIS_03_UM Revaluations -
    Unckeck the no marker update tab)
    in the infopackege of "collaps"
    Cheers

  • Maintain number range interval "01" for inventory documents

    hi,
    when i am creating a physical inventory creating document t.code LI01 i got this eror:
    Maintain number range interval "01" for inventory documents.where i have to maintain please reply me.
    naveen

    hi,
    spro->log.execution>warehouse mgmt->activities->physical inventory---->maintain number ranges.
    Regards,
    velu

  • Report to check open reservations for production orders where GI not posted

    Hi experts,
    Can we get reservation details from any report/ table for production order where material has not been issued, report should also display the value of the reserved material.
    I could not find desired details in RESB (it has price but not value) and MB25.
    Thanks in advance, useful ansers will be rewarded.
    Thnx
    Anand

    Hello Anand,
    there is no report but you may use the production order info system with list "components" and create a layout contaning the issued quantity and/or the final issue indicator. With a correct sorting, the list should show all orders with non-issued components at the top.
    Regards, Andreas

  • [svn:fx-trunk] 7677: adding xslt change so Theme shows up in asdoc for the styles ( where applicable)

    Revision: 7677
    Author:   [email protected]
    Date:     2009-06-09 10:54:15 -0700 (Tue, 09 Jun 2009)
    Log Message:
    adding xslt change so Theme shows up in asdoc for the styles (where applicable)
    QE Notes: None.
    Doc Notes: None.
    Modified Paths:
        flex/sdk/trunk/asdoc/templates/ASDoc_terms.xml
        flex/sdk/trunk/asdoc/templates/class-files.xslt

    Sorry about that. I am not exactly sure where the problem is, but I know it takes place after I put the <nav> in (in the html portion). If I understand what I am learning, the CSS at the top will structure my html code so I would have thought the CSS tageting my nav would be the focus. Maybe it is a different section though.
    CSS part:
    nav p {
    font-size: 90%;
    color: #FFC;
    text-align: right;
    font-weight: bold;
    background-color: #090;
    padding-top: 5px;
    padding-right: 20px;
    padding-bottom: 5px;
    border-top-width: 2px;
    border-top-style: solid;
    border-top-color: #060;
    HTML part: (bold italic is the part I added)
    <body>
    <div class="container">
      <div id="apDiv1"><img src="Lessons/images/butterfly-ovr.png" width="170" height="158" alt="GreenStart Logo"></div>
      <header></header>
      <nav>
        <p>Home | About Us | Contact Us</p>
      </nav>
      <div class="sidebar1">
        <ul class="nav">
          <li><a href="#">Green News</a></li>
          <li><a href="#">Green Products</a></li>
          <li><a href="#">Green Events</a></li>
          <li><a href="#">Green Travel</a></li>
          <li><a href="#">Green Tips</a></li>
        </ul>

  • Can anyone share the query for inventory aging report

    Is there any standard reports for inventory aging in oracle ebs 12.1.3 ....... If not can anyone share the query for inventory aging report

    Hi,
    It may not be so simple as you are trying to reproduce the historical value.  I believe you have to create a temporary table first.  Or you may use Command feather to get the required data in advance.
    Thanks,
    Gordon

Maybe you are looking for