None of the applications are opening

Apps not working

Agreed, is this just your user installed applications, or are apps like Calendar/Mail/App Store not opening as well?
If nothing is opening you'll want to try a 2 button hard reset on your iPad, Press and hold the Sleep/Wake button and the Home button on your device for 10-20 seconds until the Apple logo shows. Let go and allow the device to reboot. See if your apps open after that
If your apps still do not open, try downloading a free application through the App Store to see if it's an issue with the iPad or just the apps that were user installed. Any free app will do, make sure to acknowledge any change store notices. Try your apps again after installing a free app.
If you still don't notice any improvement we only have 2 options, delete and redownload the apps or use iTunes to remove and reinstall your apps.
Very worse case you might need to restore the operating software on your device, but do not do that before trying everything else! http://support.apple.com/kb/HT4137

Similar Messages

  • I just used a firewire connection to transfer files from an older MAC to a newer MAC. My newer MAC has lost all that was on it, and all the applications are opening like they have never been used before and asking for Rosetta. Help!!!

    I just used a firewire connection to transfer files from a PowerBook G4 to a MacBook Pro. The MacBook Pro has lost all that was on it, and all the applications are opening like they have never been used before and asking for Rosetta. How do I find all my files on the MacBook Pro, or undo what I have done???

    IGNORE the last post: he thought you are using Lion or Mountain Lion.
    Since you are using Snow Leopard, you need to install Rosetta.  It can be found on your Snow Leopard Install DVD in the Options section.
    Once installed all should be well again.
    Also, if your computer is connected to the internet when the Dialog Box about PowerPC applications comes up, it MIGHT allow you to download Rosetta from the internet.  There has been some discussion that Apple has discontined internet download of Rosetta into Snow Leopard.
    Someone else will have to address your lost files problem.

  • None of the applications are coming up on my Ipad after I have downloaded them on my MAC. How do I transfer them as my Ipad does not have any icons showing on it.

    I purchased a new Ipad and I can't see any of the apps on the Ipad. The Itunes shows that they are there, but I can't see anything on the Ipad. It seems dead after it has been plugged in all night.
    I get a message that is stuck "Restoring IPad apps.

    Go to settings>messages>send and receive at>you can be reached by iMessages at> Uncheck your phone number and you can select your Apple ID emal address if you want to use that for messages.

  • Office 2013 Home & Business Edition - None of the application (Word, Powerpoint, Excel or Outlook) is opening, not even in safe mode..

    Office 2013 Home & Business Edition - None of the application (Word, Powerpoint, Excel or Outlook) is opening, not even in safe mode.. I tried to run the application in compatibility mode by right clicking the excel.exe and choosing the compatibility
    mode, still no success. It is installed on Windows 7 Professional SP1. All the latest updates are already installed. I have also tried Microsoft fixit, but still no Success. Please help!! 

    I'm so sorry that I forgot the Office programs even not open in safe mode and provide useless information in my last reply.
    The problem persists when we perform a Windows clean boot, right?
    Were the Office programs suddenly not working? Or it just can’t be open after you install it? Did you get any error message?
    If you haven’t try a repair of your Office installation, we can try it to check the result:
    http://office.microsoft.com/en-us/project-help/repair-office-programs-HA010357402.aspx
    In addition, try to use Event Viewer to see if we can get some useful error log about this problem. See:
    http://windows.microsoft.com/en-us/windows/open-event-viewer#1TC=windows-7
    Regards,
    Steve Fan
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • I can't get my applications to open to full screen. The apps are opening at about 75% and I cant figure out how to get them to open to the full screen.

    I cant get my applications to open to full screen. The apps are opening up to about 75% and i cant get them to extend to full screen.

    Which applications are you talking about? 
    Example: Browser application - At the bottom right corner of a browser window you will see a small square with 3 diagnal lines.  Place your cursor in that corner to stretch out your window to full screen.  The next time you open your browser app, the window will be full screen.

  • I just update my iMac from Mountain Lion to Mavericks and the application are slow to open. The same happens to opening webpages . Please help

    just update my iMac from Mountain Lion to Mavericks and the application are slow to open. The same happens to opening webpages . Please help

    Resetting your Mac's PRAM and NVRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Reinstalling Mavericks, Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • I updated my pages app on my ipad and when I tried to open a document it says the file format is invalid. None of my documents are opening pleaser help!

    I updated my pages app on my ipad and when I tried to open a document it says the file format is invalid. None of my documents are opening pleaser help!!!!

    Try this. It worked for me.
    I discovered the same problem.  I had an older version of Pages on my iPad. After updating it to the latest version all my previous documents created in pages for the iPad were rendered unreadable and a message stated that they were an invalid format.  Why for the life of me would a program that was created by Apple and sense updated not be able to read previous versions...well that's a whole other sad story.  Any way I discovered how to fix it but it would require that you had backup your iPad on a computer and not emptied your trash. If this sounds good than here is how you fix it... And it worked for me.
    These steps will enable you to reinstall a previous version of the Pages app so you can be able to read and edit older documents.
    FIRST: if you did backup your iPad using your computer and did not empty your trash, GOTO the trash and look for PAGES 1.4 (or other number) ipa ( that's the file extension) ie PAGES 1.4 ipa.
    SECOND: move that file out of the trash and onto your desktop.  Once you do this, double click on it and a box will come up stating a newer version has been found and do you want to revert back to older version. ANSWER YES. It will than automatically place and overwrite the older version back into the file on iTunes that contains the rest of your backed up apps.
    THIRD: and this is where it is important that your backup would have to have been on your computer. I'm not sure if backup on the cloud will work.  iCloud backup at your own risk And here's why. Before you restore you will need to remove the latest version of Pages off your iPad by doing the usual : holding down the home button until the apps wiggle and remove by pressing on X on app.  Removing off your iPad will also delete all your documents but if you have a previous backup on your computer those documents will be stored safely on itunes and will return.
    FORTH: plug your iPad into your computer and allow it to sync so iTunes will recognize it. Once iTunes is up and you can see that it recognizes your iPad, GOTO "FILE/DEVICES/RESTORE FROM BACKUP."  ******* DO NOT CLICK ON BACKUP***** click on RESTORE FROM BACKUP. This will reinstall all previous settings and documents that were their when you backuped PLUS the older version of Pages that you placed back from the above steps. Let it run through all the setups ( this could take up to 20 minutes...depending on amount of data and photos and apps).
    FIFTH: Once everything is reinstalled a message will popup on your computer stating "to leave iPad plugged in until iTunes recognizes it again" ( it's basically rebooting itself).  Once done (leave iPad plugged in still) GOTO iPad and follow the steps. IMPORTANT:  iPad will ask you if you want to SET IT UP AS A NEW IPAD, BACK UP FROM THE CLOUD or BACK UP FROM ITUNES.....press SET UP AS NEW IPAD. Follow all of the steps required. Once complete GOTO iTunes on computer, look for "IPAD" plus a little arrow ( should be on upper right corner of iTunes window, click on it ( this will safely disconnect your iPad from iTunes) . Now unplug iPad from computer and go to your iPad and look for the older version of Pages. It should be there along with all your old documents ( readable and editable too).
    Hope this helps. Good luck.

  • I tried to open Photoshop Elements 11. I got a message that components of the application are missing and that I needed to reinstall Photoshop Elements. I purchased the software by downloading it from Adobe so how can I reinstall it?

    I tried to open Photoshop Elements 11. I got a message that components of the application are missing and that I needed to reinstall Photoshop Elements. I purchased the software by downloading it from Adobe so how can I reinstall it?

    Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there.

  • I have CS4 installed on two computers however none of the applications will now open on one machine and I get the error message 150:30

    I have CS4 installed on two computers however none of the applications will now open on one machine and I get the error message 150:30

    Your best bet is probably to start over by cleaning off the old software with the Adobe Cleaner tool:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Then reinstall from your original media, or download it here:
    http://www.adobe.com/downloads/other-downloads.edu.html

  • My mail is stuck in yesterday's mail.  None of the icons are accessible.  Can't open delete or change mailboxes.  Still getting mail.  Any suggestions?

    My mail is stuck in yesterday's mail.  None of the icons are accessible.  Can't open delete or change mailboxes.  Still getting mail.  Any suggestions?

    This forum is for troubleshooting Mail under Mac OS 10.4 Tiger, not Leopard. You'll probably want to post your question in the Leopard Mail discussions:
    http://discussions.apple.com/forum.jspa?forumID=1223

  • Tried to drag a progam to the trash but each time I did a window pops up and say that i cant moved it to the trash as the application is open.. the program i wish to uninstal is a pre-paid mobile broad band a

    I tried to drag the program i wanted to uninstal to the trash but each time i try a window pops up and tells me i cant as the application is open and i know it,s not??? the program i want to uninstal is a pre paid mobile broad band,  thank you Marie 
    I have tried going to the  program it self but no where can i find how to uninstal it . I,m getting very frustrated with  this C.P  as at least  with windows you went straight to the control panel and went to ADD/Remove, and clicked onto the program you wanted gone and clicked on it and it uninstaled . GRRR

    I assume that the app didn't come with an uninstaller application/script?
    If you definitely want to trash it have a look in Activity Monitor and your Login items, as there may be something running in the background that is preventing it being trashed.
    System Preferences>Users & Groups (or Accounts depending on OS), Login items tab and delete anything that pertains to the app you want gone.
    Next, Utilities Folder>Activity Monitor, have a look to see if there is anything running with the name of the awkward app. Select it and click on the the big red 'quit process' button. Now try and trash it.
    If you are still having trouble you could try downloading the free AppCleaner:
    http://appcleaner.en.softonic.com/mac

  • I want to download free apps for iphone 4s but when downloading it is asking for payment info. the application are free but why it is asking for purchase details...please help me...

    I want to download free apps for iphone 4s but when downloading it is asking for payment info. the application are free but why it is asking for purchase details...please help me...

    In iTunes, click "Store", sign in with your Apple I.D. After singing in, click "Store" again, select "View my Account", re-enter your password and your account info will be displayed.
    Click "Edit" in front of "payment information" and select "None"

  • Firefox 8 starts after upgrade but none of the windows are visible and it crashes on quit

    Firefox 8 starts after upgrade but none of the windows are visible and it crashes on quit

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    * https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    * http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    See:
    * http://kb.mozillazine.org/Firefox_crashes
    * https://support.mozilla.com/kb/Firefox+crashes
    If you have submitted Breakpad crash reports then post the IDs of one or more Breakpad crash reports (bp-xxxxxxxx-xxxxxxxxx-xxxx-xxxxxxxxxxxx). You can find the IDs of the submitted crash reports on the about:crashes page. You can open the about:crashes page via the location bar, like you open a website.
    See:
    * http://kb.mozillazine.org/Breakpad (Mozilla Crash Reporter)
    * https://support.mozilla.com/kb/Mozilla+Crash+Reporter
    * https://developer.mozilla.org/en/How_to_get_a_stacktrace_for_a_bug_report

  • Hello i just bought quicktime pro and the application doesnt open ( im on windows 7) tank you

    hello i just bought quicktime pro and the application doesnt open ( im on windows 7) tank you

    hello thanks for helping i found where the problem was coming from but no how to resolve it. it sems like the AC3 format of avi video is in conflict with quicktime pro or something like that..
    i tried to take some codec for avi video but none of them resolved the problem if somebody has any answers thank you very much.

  • None of my folders are opening

    none of my folders are opening. I have osx 10.7.2. i tried restarting and nothing, but when i have system preferneces open its fine. oh and does anyone know how to downgrade back to 10.7.0. i have an update and i dont like it.

    Not knowing where your folders are, it's hard to say how you can open folders.  Usually, in the finder window, you click on it, and the contents show up in the next column.
    As for "downgrading", it all depends if you have the 10.7.0 installer around, which probably disappeared long ago.  Rarely is there a good reason to downgrade, unless some program is borked.  Each release of OSX improves way more than it messes up. 

Maybe you are looking for

  • Auto Start/Stop Oracle Database Lintener DBConslone on Linux

    Dear all I have install oracle 10.2.0 on redhat 4.7 every time i have to start manualy. it try with following scrip / process but database not starting automatically. Please any one can provide steps for auto start and stop oracel services on RedHat

  • Opening edit mode page from Search page

    Hi All, I am developing one simple system for Expense Reports in ADF. The proposed system will have Expense Report entry, Search, copy, print and edit functionalities. I am able to Enter, Search and copy the expense reports but from the search page I

  • Sales return with conditions!!!

    hello gurus.... my requirement is that sales return should not be allowed after 15 ( say ) days from order / del / billing date. how to configure this... regards Vishal

  • QT 7.6.4 wont download/Can't view itunes movies

    I have a Macbook pro. All was fine til about 4-5 months ago. May have been about time I downloaded software for my iphone but thinking not. Currently running Quicktime 7.5.5 . All efforts at ugrading to 7.6.4 have failed. I get messages saying "sorry

  • Need a link for ADF class hierarchy diagrams

    Hi, For some reasons i m not able to find via google or in documentation I need class hierarchy diagrams of the following - ADF Binding e.g Faces* to AttributeBinding etc etc. - ADF Model e.g ApplicationModule > Entity > View to Rowset etc etc these