NONE of the buttons on my curve 8520 are working. HELP!

So, today I pulled out my phone and the screen was black. I took out the battery, put it back in and the LED just kept blinking. I pulled the battery out again and left it for a bit. It turned on, when it turned on my phone was locked. I couldn't press any buttons. No matter what it was, the four buttons on the top row, the trackpad or any of the keys weren't working. My phone still turns on normally but none of the buttons work. 
I have a Curve 8520.
Thanks.

Im having the same problem,Not sure what to do..Good luck
Twisted Gypsy

Similar Messages

  • None of the buttons on my Torch will not work - phone inoperable

    The buttons on my Torch will not work...I can receive calls but can't answer them. I cannot do anything with the phone...it is fully charged - HELP! I am traveling and this is now critical!

    I don't have a 9800 here to test, but if you keep the keyboard closed, isn't there a onscreen enter key?
    Normally the buttons not workng is indicative of moisture issues. It sounds like what I have seen multiple times on a device with moisture damage.
    Even sitting on a bathroom counter during a hot steamy shower or bath can cause keyboard and trackball problems UNTIL properly dried out. It really is more common than you think.
    1. Remove the battery immediately!! Do not attempt to turn on your BlackBerry.
    2. Let the device dry in a warm, dry place for 3 to 5 days* (see below)
    3. DO NOT "check it each day" by placing the battery in. Leave it be to dry completely. This takes time. Replacing the battery to check it can only damage it more (moisture + electrical current = disaster).
    4. If the device is warm after the drying period, allow it to cool to room temperature before placing the battery back in.
    Suggestions on drying your BlackBerry in a warm place (open, with the battery out):
    *Place the BB in a container of dry UNcooked rice, and then you might also place it in any of the locations mentioned below.
    *On top of any dry heat emitting electronic component: TV cabinet or CRT, LCD, cable TV/Satellite converter box or plasma monitor
    *On the dashboard of your car on a sunny day
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • None of the cellular functions (texts, calls, data) are working on my 4s.

    While updating my Iphone to ios 7.0.2  it halted roughly 90% of the way through, so I had to restore my phone through itunes. When it finished restoring I had no 3g nor would any of the service functions work. None of my texts or calls would even go through. The bill is paid and there are no current problems with my Verizon account after an hour on the phone with them, they said it had to be an Apple issue. After I finished restoring my phone, it changed my number. Instead of the standard xxx-xxx-xxxx with area code and region digits it changed to: 000000*** (this is what shows up under setting -> phone -> my number.) I have no clue why it's not connected to my verizon account anymore and there is no way for me to activate it. Help!?

    Today I tried with an uninstall of NM, a registry cleaning and reinstalling of NM (new version from the download site) , if the printing problem would be solved.  - No solution. Still not possible to generate any printing from out the Network Magic apllication.
    Very ennoying problem.  The only way I can gather the" details of all installed network equipments" is taking  a capture screen. of the details pages.  If printing "details" and "network settings" is not possible,  NM is for me a worthless application. Especially since none of my other applications is showing this kind of problem with pinting.
    Stablu

  • None of the functions on my NI mydaq are working

    I've used this device plenty of times and had no problems and now it's not working.

    soooo .... Plugged in?  Turned on?
    What changed?  Setup?  Software? 
    Any "events" happen - power surge/outage, connect something to something you shouldn't have?
    Tried the hardware on a different computer?
    Done any troubleshooting in MAX?  Does it show up in device manager?

  • HT1695 i bought a used ipod touch and reset it to the factory settings via itunes and now i'm trying to set it up like new and it won't let me sign in with an apple id it says it can't connect to the server.  Other wireless devices are working HELP?!

    I am trying to set up  my daughters ipod touch after resetting it to factory settings.  So I am trying to sign in using an apple id.  It says won't connect to the servier, but I have other wireless devices connected, so I know my wi fi is working. What now? Thanks

    Return it and get a refund. Without the prior owner's Apple ID and password that device is useless. Find My iPhone Activation Lock- Removing a device from a previous owner’s account. You were screwed by the ignorance of the pawn shop owner.
    <Edited by Host>

  • None of the buttons work on my phone, cursor only moves up & down or side to side

    Hope someone can help, I have had my BB Curve since Christmas my Partner bought it from someone as an unwanted upgrade. It was brnd new then. I used it on Friday and then 30 mins later it was ringing i tried to answer it nothing would work. The cursor moves from side to side and up and down apart from that nothing works, people can text and call but i cannot open the texts or answer the calls.
    I have completed a software update but it still does not work. None of the buttons, not even the side ones work..any advice ?

    Hi
    The Blackberry is designed to be reset by removing the battery whilst the device is powered-on. Leave the battery out for a minute or 2.
    See if that resolves the problem. If not, then more information will be needed before making suggestions. Please provide as much as you are able of the the following
    Blackberry Model.
    Carrier Name.
    Do you have a Data Plan?
    Operating System Version go to Menu > Options > About - it looks like v5.0.0.681
    Memory for Device and SD Card Options > Memory
    Any error statement or code.
    The Exact nature of problem - the more info the better.
    When this started and whether it started just after an update or new App download and which App/s theme/s download.
    Blackberry Best Advice - Back-up weekly
    If I have helped you please check the "Kudos" star on the right >>>>

  • Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the

    Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the features on the left side.

    Hi Nealeh
    Thanks i think I got it working of a fashion.
    Except the replace colour, does not seem to end up with the colour I picked using the picker tool. Its as though it hads not replaced the colour but blended in the desired colour with the old incorrect colour!
    Buy trial and error picking not the right colour but close - which when mixed with the existing colour is close.
    Sorry I can't post the pictures as the Lingerie Mfg, has me under non disclosure.
    The scenario is:-  say a blonded mainly tanned model a high cut [at the hips] corsette style basque, with an ultra low bra line.
    Our dear model, has just come back from St Barts with a fabulous Tan, and equally striking bold Tan lines!.
    So we have great tanned legs, then the 'porcelain white band' where her swimsuit was.
    Likewise we have a tanned face, and arms, shoulders etc and a great tan on the top of the cleavage, then it stops, white band to the top of the ultralow cut bra line of the basque.
    She must have lived in like the most conservative bikini on the planet [50's style], for 2 weeks!
    Had she had a normal skimpy bikini on, no problem!
    If i don't solve it, she will get fired!
    Not a lack of interest in your post, but I was out, and tried to log in to this site; which I could do, on my iPad Air / 5 [whatever its the new one]. And tried to 'sign in' - but it just hung at the
    "Join Adobe Community" adobe sign in splash screen! with he little whell spinning around continuously!!!
    I have Safari on this iPad. Guess that is all it runs.
    So technology is not my friend today!

  • Just upgraded my iPad to IOS5 and when the download was completed, a window said that there was an error and it could not restore.  Now I have a black screen with the Apple logo and the circle lines.  None of the buttons respond. Help, please!!

    Just upgraded my iPad to IOS5 and when the download was completed, a window said that there was an error and it could not restore.  Now I have a black screen with the Apple logo and the circle lines.  None of the buttons respond. Help, please!!

    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. Maybe this will let the iPad reboot and then you may need to restore again but see if this helps to start the iPad first.

  • TS1363 how can i change from disk modae to normal mode as none of the buttons seems to be working ?

    how can i change from disk modae to normal mode as none of the buttons seems to be working ?

    Have you tried a hard reset of the iPod yet?
    How to reset iPod
    This should take you out of disk mode and allow the iPod to boot up as it normally does.
    B-rock

  • Iphone4 frozen and none of the buttons are working and it isnt showing up in iTunes either please help!

    my iphone4 keeps freezing on me and now it will not unfreeze. None of the buttons are responding and my iphone will not show up in iTunes. Please help!

    See: If you can't update or restore your iOS device

  • Having upgraded from iPhoto 11 to iPhoto 2.0 (531) it now loads but crashes after a minute or so and none of the buttons work. Can anyone help please.

    Having upgraded from iPhoto 11 to iPhoto 2.0 (531) it now loads but crashes after a minute or so and none of the buttons work. Can anyone help please.

    Hey Ian
    That would be correct. because of the nature of your issue, you may find more information by using another one of Apple's support resources.
    Contact Apple Support
    https://getsupport.apple.com/GetproductgroupList.action
    Thank you for using the Apple Support Community.
    -Norm G.

  • Trying to sell an item on ebay, but none of the buttons will work on the "Create a listing" page

    I don't seem to be having a problem anywhere else, but when trying to sell an item on ebay none of the buttons I hit will work. For example, if I try to add a picture, I hit the button, but nothing ever happens. Any ideas?

    Many site issues can be caused by corrupt cookies or cache.
    * Clear the Cache and
    * Remove Cookies<br> '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
    Type '''about:preferences'''<Enter> in the address bar.
    * '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
    * '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
    If there is still a problem,
    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
    While you are in safe mode;
    Type '''about:preferences#advanced'''<Enter> in the address bar.
    Under '''Advanced,''' Select '''General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites. Are there any problems?
    Then restart.

  • None of the buttons will work

    It's almost like the phone is completely dead.  None of the buttons trigger any response from my phone.  The only way I know it's still working is that when people call me, it rings and shows their picture on screen.  I've tried taking the battery out and putting it back in, but the phone just reboots and has the same problem.  It's very frustrating to see that I have all these missed calls and voicemails but be able to do anything about it!  Any help would be greatly appreciated.
    Thanks so much.

    Hi and welcome to the Blackberry Forums
    If you connect the device to the pc, is detected for the Blackberry Desktop Manager?
    If is detected try installing the software again, follow this
    http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB03621&sliceId=1&docTy...
    If I help you with any inquire, thank you for click kudos in my post.
    If your issue has been solved, please mark the post was solved.

  • Iphone 5 shuts down, as if no power, none of the buttons work.

    IPhone 5 shuts down, as if no power, none of the buttons work.  When plug back the charger cable, the screen immediately comes on and battery shows 40% or 50% or even 80%?  Also, battery drains very fast on both IPhones after recent ipdate of IOS.  Please help.

    Hello there, noviipareni.
    The following Knowledge Base article offers some great steps for troubleshooting issues with unexpected power off:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Particularly:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Additionally this article reviews some recommendations for optimizing your settings for battery life optimization:
    Apple - Batteries - iPhone
    http://www.apple.com/batteries/iphone.html
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I am stuck on the Subway Surfers app in guided access mode the info its giving me to fix it is a liar! none of the buttons will work all I can do is lock it unlock it and play subway surfers. I cannot turn it off and refuse to let it die. HELP ME PLEASE!!

    Ok I dont understand this SOS!!!! Please dont tell me to restart my Ipad Cause none of the buttons work except the lock button and that will not allow me to turn it off please help all suggestions are welcome.

    What you need to do is triple-press the HOME BUTTON three times. You will be prompted to enter your passcode. This will bring up the options for guided-access mode and you will then need to click "End" in the top corner.
    Guided-access mode must have accidentally been enabled by triple-clicking the home button.

Maybe you are looking for

  • Vimeo + Spry horizontal menu: z-index?

    Hi all, when I embed a video from vimeo, and I guess any other flash derived movieplayer, the spry menu kindof disepears behind the embedded movie. I already tried to google it and also on this forum, but no solution found. I also already tried to ra

  • Forgot Password for J2EE_Admin     An error occurred in the persistence. The or

    I need your help!! I forgot password for j2ee_admin and need to enter the Visual Administrator I do not like change, achieved with the user enter SAP* to UME but will not let me change it. When I try to change the key, I get the following error An er

  • Cant get into Dreamweaver forum Help !

    How do I get on the dreamweaver forum? All I get is login page over and over and over and over Cant login to ask the question how to get in Same login as here It even fills out my login for me and nothing happens How to get help?

  • How to see the users list in BO

    I am working on BO 6.5 supervisor and would like to know the steps how to see the user count? Your help is appreciated. Kumar

  • Duplicating an encore-2 project....using XP

    I would like to duplicate an encore project on an external drive. I copy the files to it, everything seems to be OK in the project panel, the menus all seem to be OK, except the file in the time line seems to be "offline" and previews are all blank.