None of the exterior buttons are working...

I recently replaced my screen and digitizer. Everything was still functioning well, even with the cracked screen. I opted to replace both screen and digitizer, since it appears to be quite the process to transfer the old digitizer to the new glass only. I also at this time, since I have one of the first waves of iPhone 5 (had it from day 1 of its release) decided to replace the wi-fi antenna, since I was already pulling the phone apart anyways. After performing what I feel to be a very successful replacement of both the wi-fi antenna and the screen/digitizer, none the side buttons work anymore! I have triple checked to make sure all ribbons are in place and everything appears to be in good order. I was very careful with the whole process, so can't imagine that anything was damaged. But now, the sleep/wake button, the mute slider button and neither of the volume buttons ( + or - ) work. I am assuming that all these function via different cables and/or contact points...? What could be the issue here?

Since the iPhone should not be opened or repaired by the user or another 3rd party without loosing the warranty or the Out-Of-Warranty Service option, we can only speculate, that one of the repair steps you took is the reason for the problems.
The only solution would be seeking help from a 3rd party repair shop and hope that they will be able to solve the issue.

Similar Messages

I want to factory unlock my iphone 4s vodafone.....i am in pakistan now and none of the sim cards are working so i need solution here is imei.. 013072001593353

I want to factory unlock my iphone 4s vodafone.....i am in pakistan now and none of the sim cards are working so i need solution
<Personal Information Edited by Host>

Only the carrier the phone is locked to can authorize the unlock. You will need to contact Vodafone to see if you qualify for an unlock.

Adobe Photoshop CS6 none of the blending modes are working.

For example if I set a lens flare with a black background and set it to screen it will not work. None of the blending modes work. Anyone know how to fix this issue? I am fairly new to photoshop and really need some help.

BOILERPLATE TEXT:
Note that because this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

IPod is frozen, none of the "5 steps" are working...Help!

Got the iPod Nano yesterday for Christmas as did many others. It was working fine until this morning when I tried to charge it by connecting it to the computer. It lit up and froze on the spot. The clicker made a noise when pressed down, but would not work otherwise. Eventually, the clicking stopped and it remained frozen until it died a few hours later. After that ordeal, I turned it back on with the remaining bit of battery to it working fine again, and charged it for a couple hours. Everything seemed good. About 20 minutes ago, I wanted to update my library so I (once again) plugged it into the USB. It lit up, and froze. The reset method does not work, the toggle of the HOLD switch does not work, nothing seems to be working.
Message was edited by: donwheetay

I left my iPod Nano alone for a couple of months. I assumed the battery was drained, so plugged it into a charger last night.
The apple icon comes up but I cannot get it past that icon. I plugged it into the power cord & plugged it into my computer, which I left on all night. Still displays apple icon only.
The computer does not recognize the ipod as being attached.
I have tried the "slide hold on & off" and the reboot sequence (holding down the center button & the menu simultaneously). It turns off after 6 seconds and then comes on.
And still the Apple & nothing.
So do I let it discharge again and charge & retry?

Disabled ipod and none of the suggested fixes are working!

My daughter entered her password wrong too many times and her ipod is now disabled. I've tried all the suggested fixes on the support page and nothing is working. When I try to restore it thru itunes it says it can't because it is locked with a password. I tried to erase it thru icloud, but the ipod is offline and I don't know how to get it online. I tried to soft reset, I tried to hard reset. Nothing! Help!

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Can't disable quick find, none of the regular fixes are working.

I've been running Firefox 23 with no problems for a while, and just discovered that I get a quick find prompt every time I type an apostrophe into text boxes. The "search for text" option in my tool panel is unchecked, and I have repeatedly tried opening dialogue boxes to reset quick find, but I still get prompted every time I hit a slash or an apostrophe. This is incredibly inconvenient, and I've been searching for a way to fix this for the last hour and nothing has worked.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

My MBP is stuck in Guest User mode and the taskbar is unresponsive. None of the keyboard shortcuts are working either. What do I do?

After an automatic update last night that updated my recent Lion to 10.7.2 w iCloud a new guest user account appeared at the login screen. The login screen wasn't responding so I clicked on both user accounts. As luck would have it the guest account logged in and now Im stuck there at the safari window that won't load. It's just stuck at a guest login information screen. It isn't even connecting to the internet. The mouse moves but it won't click on anything. And despite restarting the comp a few times it opens up back at the same screen. I think that's Lions built in autorecovery mechanism that won't let it go back to the beginning. I've already tried rebooting holding command-r. that isnt working either.
Any suggestions?

i have a dvd stuck in my superdrive, so in an attempt to get it out, I tried clicking on the guest account listed at startup. now i have an additional problem, i can't logout of the guest account. i can only get access to my profile by safe booting (holding shift on booting). if i boot normally, it automatically goes back into the guest account, which has no accessibility. i can't even use the "shut down" or "restart" options.
HELP!
- Neal

After CC install none of my Adobe products are working.

I have CS6 and I decided to subscribe to CC. Now none of the Adobe products are working.
Thank you.

Hi Arooly,
There have been reports of some users receiving Configuration Error 16 when opening their applications.
If you are facing these difficulties then please implement Solution 1 in Configuration error - http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error- cs5.html to resolve your difficulties.
Regards,
Sumit Singh

HT204492 can someone help me ? My iMac remote control isn't working properly , well all buttons are working apart from the MENU button !! Can anyone shed any light on this ?

can someone help me ? My iMac remote control isn't working properly , well all buttons are working apart from the MENU button !! Can anyone shed any light on this ?

As this is the forum for PPC (pre-2006, non Intel) iMacs I assume that is what you have.
Try pairing the remote again:
How to Pair your Remote to your Mac:
http://support.apple.com/kb/HT1619?viewlocale=en_US

I have just installed Lightroom 5-7 on my new PC laptop but none of the photos I am working on are there, what do I do to get them from my old laptop also a PC

Hi
I just bought a new PC laptop and installed Lightroom 5.7 on the new one but none of the photos that are in Lightroom on my old PC computer are on the new one.
I have several photos that I am working on in the old computer which is dying and not very reliable any more.
How do I find the photos on my old computer and get them into Lightroom on my new computer?

You would need the catalog and the images from the old computer if you want your work that you have done previously. You will have to copy the images and the catalog from your old computer to the new one. Don't you know where you imported images to?

I have an iPod 4th gen and the bottom part of it doesn't work where the space, .?123, and the go buttons are I droped it yesterday but it started doing this an hour ago I can slide to get in but it's stops working after that someone tell me how I fix this

I have an iPod 4th gen and the bottom part of it doesn't work where the space, .?123, and the go buttons are not working I droped it yesterday but it started doing this an hour ago I can slide to get in but it's stops working after that someone tell me how I fix this

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

After updating my 4S to iOS 5.1.1 last night, none of my data applications are working today, nor Siri, iMessage or anything of the like. I'm at a loss as to what might have caused it. Is anyone else having this issue/has anyone found a fix?

After updating my 4S to iOS 5.1.1 last night, none of my data applications are working today, nor Siri, iMessage or anything of the like. I'm at a loss as to what might have caused it. Is anyone else having this issue/has anyone found a fix? Everything seems to work fine if I connect to wireless, but if I'm not connected to it then nothing is working. My service provider says everything should be working fine, I still have the 3G symbol and full bars.

Somebody clearly hasn't read the User Guide.
Basic troubleshooting steps are retart, reset, restore from backup, restore as NEW.
If you have tried ALL of these steps and you're still having problems, then you need to bring your phone into Apple for evaluation.

Why are none of the effects I apply working?

Why are none of the effects I apply working? Every effect I've tried causes the program to "Not Respond", and then shows the program applying the "Gaussian Blur" when I have not applied it. The program applied "Gaussian Blur" also does not take effect, even though it shows the program applying it.

Create a blank document , and draw a circle and apply a drop shadow does that work?
If that does work you may have a problme document. Guassian blur will show on a document with drop shadows, if Illustrator is struggling to prcoess the drop shadow.
If taht does not work reset your prefences.

NONE of the submit buttons work anymore!!!!!

I don't believe this!
Yesterday I was working on page zero, which now has a searchfield, a radiobutton and a search button, but no branch because this is not possible.
When you press the search button, the query goes to a different page and shows the results (I used an Iframe to show the results on the regular ultra search page), but for the search button to work on every page, every page needs the same branch, which checks if the search button has been pressed, and then branches to the right page.
After I did that I went to bed and this morning I find out that NONE of my forms can save their data anymore!!!!!
Some of the forms simply submit and show old data, some of the forms give me this error:
ORA-20001: Error in DML: p_rowid=129, p_alt_rowid=ID, p_rowid2=, p_alt_rowid2=. ORA-01747: invalid user.table.column, table.column, or column specification
I really need help on this, I am supposed to deliver this week and now everything is broken.
What I want to know is what can be a reason for a form to submit with a submit button, pretend it is saving and after that show the old data without showing an error?
If there was an error message I could start looking for answers but right now I have nothing.....

Sorry for posting this twice I was refreshing the wrong page and I did not see it appear, so I wasn't sure I posted it or not

Content Tab: None of the fact tables are compatible with the query request

Hi All,
**One thing I am not clear yet of all my years with OBIEE is working with the content tab in BMM.**
I have made a rpd the joins in physical layer as shown below:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056545119428530
And the BMM layer as:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056519553812930
Error I am getting when i run a request from the 3 columns from the selected 3 tables is:
Dim - Comment Code Details
Fact - Complaint
Dim - Service Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14020] None of the fact tables are compatible with the query request Sr Num:[DAggr(Fact - Complaint.Sr Num by [ Dim - Service Details.Sr Cat Type Cd, Dim - Comment Code Details.Cmtcode name] )]. (HY000).
I get no error for consistency.. I read everywhere and I know i need to set the appropriate aggregation levels in the various dims and facts LTS properties to help OBIEE understanding our model, but how to do that.. how do i decide... how should I approach, what should be the aggregation level, what details.
When i click More button i see different options: Copy, Copy From, Get Levels, Check Level, what do these mean.
Aggregation Content, group by - Logical Level or Column which one should i choose and how should I decide.
Can anyone explain the Content Tab in details and from scratch with some example and why we get these errors.... I know many people who are well versed with many other things related to RPD but this. A little efforts of explaining from you guys will really be appreciated.
Thanks in advance,
Dev

Hi Deepak,
Option 1:
My tables in physical layer are joined as below:
D1--> F1 <--D2--> F2 <--D3
Same way i model it in BMM
D1--> F1 <-- D2--> F2 <--D3
Here D1 is non Conformed Dimension for F2 and D3 is non Conformed dim for F1. Later create Dimensional hierarchies, I tried setting up the content levels
I go Sources>content tab of Fact F1 I set
Dimensions----------- Logical level
D1---------------------- D1 Detail
D2---------------------- D2 Detail
D3---------------------- D3 Total
then, I go Sources>content tab of Fact F2 I set
Dimensions----------- Logical level
D1---------------------- D1 Total
D2---------------------- D2 Detail
D3---------------------- D3 Detail
Then, I also go in all the dimensions and set their content levels to Details, but it still gives me errors not sure where I am going wrong in setting the content levels.
I need to know whether the way I have modeled it in BMM is right,
Option 2:
I can combine the two facts in a single Logical Fact or the above design should also work.
(F1&F2)<--D1, D2 , D3 joined separately using complex logical joins.
what will be the content tab details?
Thanks,
Dev

None of the exterior buttons are working...

Similar Messages

Maybe you are looking for