None of the functions in the sample editor are appearing
Every time i go to the sample editor the editing functions are all greyed out, with the exception of gain I am using some of the logic content
Is there an easy way around this? Did I not correctly install the au stuff?
sounds like you are editing an apple loop. those cannot be modified without bouncing the loop in the arrange, and reimporting it
Similar Messages
-
I have been a long time user of Photoshop elements/Premier and I just loaded version 13 (from 12) and they have completely changed the functionality of the organizer! OMG!!!!! You can no longer move a picture easily in the albums and you MUST use one of the Adobe preset backgrounds for a slide show. Really??? Generally I like the templates for certain uses but I am creating long movies of travels. I do NOT want your backgrounds, but apparently I have no choice. And I can no longer interface with Premier - then why did you sell them to me as a package?
I am sure I can't get my money back because I did a direct download but I have uninstalled the program and gone back to version 12 - BUYER BEWARE if you have been using Premier with the organizer it will not work seamlessly. Such a disappointment because a good and generally well functioning program has been butchered. .I've just looked to buy iCab as people have suggested but reviews suggest it doesn't work reliably since IOS5.
Frankly I feel cheated and I've been a historic fan since having an Apple IIci 20 years ago. A major plus point in iPad usability has gone. Funilly enough I was about to recommend 25 iPads as Safari was so useable and the users I had in mind having seen my iPad were keen. But I couldn't hand on heart recommend iPads now and after seeing how Apple drops key functionality and usability wouldn't trust this supplier. Guess I'm glad I didn't recommend them and then have this happen.
And if I want tabs I'd have gone with Andriod for half the price.
It wouldn't be so bad if I could reverse the upgrade.
Anyone know how to cheat the system? -
The function of the F keys at the top of my keyboard no longer work as they used to. The actions they do no longer correspond to the symbols that are printed on them. For example, the volume buttons no longer control volume and now change the display to full-screen instead, and the brightness buttons don't do anything at all.
This started today and I'm finding it very irritating. I checked in System Preferences and didn't find any obvious way to turn most of them back to what they used to do.
Help?In System Preferences > Keyboard uncheck Use all F1, F2, etc. keys as standard function keys.
-
Can anyone help me with this?
I have a set of Cue Points in an FLV I'm playing. It's an interactive quiz, so the idea is that flash will change a variable, theAnswer, to a different letter depending on which question it is. The answer to question 1 is B, question 2 is D, etc.
Either the cue point event listener isn't working, or else it is working and Flash isn't declaring the variables. Can someone help?
The error message I get is:
1120: Access of undefined property theAnswer.
I literally can't find a single problem with my code. I have an almost identical Event Listener further down which works.
var theAnswer;
vid.addEventListener(MetadataEvent.CUE_POINT, cueAnswers);
function cueAnswers(e:MetadataEvent):void{
var cuePointNames = e.info.name;
if (cuePointNames =="start")
theAnswer = "C";
else if (cuePointNames =="q2")
theAnswer = "A";
else if (cuePointNames =="q3")
theAnswer = "C";
else if (cuePointNames =="q4")
theAnswer = "A";
else if (cuePointNames =="q5")
theAnswer = "D";
else if (cuePointNames =="q6")
theAnswer = "C";
else if (cuePointNames =="q7")
theAnswer = "A";
else if (cuePointNames =="q8")
theAnswer = "D";
else if (cuePointNames =="q9")
theAnswer ="B"
else if (cuePointNames =="q10")
theAnswer ="B";
The function is called by this later:
function nkAinfo(e:MouseEvent):void {
if (theAnswer=="C")
trace("You clicked right");
else
trace("You clicked wrong");
What's going on? Is the function not being called or are my variable declarations wrong?Probably not the answer to your question, but it could help anyways....
First there is another command that, to me at least, is much easier to read that a bunch of nested if/if elses. And that is the switch.
switch (e.info.name){
case "start":
theAnswer="C";
break;
case "q2":
theAnswer="A"
break;
//and so on
To me that is easier to maintain and read. But I don't think that is really what you need here. So just file that one away for the future.
In this case, what I think you need is an array.
var currentAnswer:String;
var correctAnswers:Array=new Array();
correctAnswers["start"]="C"
correctAnswers["q2"]="A"
// and so on.
Then your cuepoint handler function becomes something like this:
function cueAnswers(e:MetadataEvent):void{
currentAnswer=correctAnswers[e.info.name];
And I'm a little confused by your mouse click handler. It would seem to suggest that the answer is always "C"? But I"m guessing that it is supposed to compare what the user clicked on to what the cuePoint has told it is the correct answer? Well if that is the case then it would probably look something like:
function nkAinfo(e:MouseEvent):void {
if(e.currentTarget.clickedProperty==currentAnswer){
trace("Correct");
} else {
trace("Incorrect");
With the way you are currently doing this I'm guessing that you have a bunch of repeated functions for each time there is a mouse click and that your code is a lot more complicated that it needs to be. And that somewhere hiding in all those lines there is an error that would be simple to fix if you could see it.
What the error is telling you is that somewhere your are trying to assign or retrieve theAnswer and it hasn't been defined yet. -
Needed the functionality of the routine PROCESS_BAI_FILE
needed the functionality of the routine PROCESS_BAI_FILE in the standard program RFEBLB20
Hi,
Please close your current powershell console, and start a new Window, and then check the result.
Like David replied, this is a strange issue, hard to find the cuase, but I will report the issue, hope
someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Regards,
Yan Li
TechNet Subscriber Support
If you are
TechNet Subscription
user and have any feedback on our support quality, please send your feedback
here.
Cataleya Li
TechNet Community Support -
What is the function of the Slice and number 4 LUTs in cRIO9104 FPGA?
When I compiled the FPGA VI, the compliation report tell me that there is limitation of the resources pf FPGA, the FPGA that I am using is cRIO9104. Do you know what is the function of the slice and number 4 LUTs in FPGA? Which FPGA LAbVIEW code need to use these FPGA resources? And I have attached the compliation report for you as a reference.
Thank you for your helping!
Attachments:
8-9-2007afternoon2.jpg 2305 KB
911Improved_error.JPG 139 KB
911afternoon_error.JPG 141 KBYou've simply got too much code to fit the available resources on that one particular FPGA, just as the error message says. I would take the error message's recommendations, or split up the functionality into two FPGA's.
By the way, LUTs are lookup tables, one way the compiler implements your code. Slices are areas that run independently (general case) of any other slice and how the FPGA achieves true parallel processing.
“A child of five could understand this. Send someone to fetch a child of five.”
― Groucho Marx -
Upgraded to LR5.7 and PS Elements 13. Using a Solid State Drive which is becoming Full! Can I remove older versions of these programs without affecting the functionality of the new programs?
Yes, there is no need to keep previous versions of software on the SSD (or on your computer).
Also, you didn't mention this but if the photos are on the SSD, you should move them off the SSD to a regular hard disk using these instructions: Adobe Lightroom - Find moved or missing files and folders -
What does the function of the TLV 132 in LSP ?
In ISIS protocol,what is the function of the TLV 132 in LSP? It seems like routers choose the latest active interface on the box,is it right ?
Hello WL,
the TLV 132 is present in hello packets but also on the LSP both L1 and L2 and contains the ip address(es) of the transmitting interface
As explained in the previous post this TLV allows the receiving router(s) to perform a check of adjancency validity from the point of view of IPv4.
Probably the TLV 132 is present in the LSP for two reasons:
for completeness and for providing a fast check about the usage of the LSP.
The LSP indeed is a list of TLVs so implementation can also be a little redundant here by putting all TLVs into the LSP.
This also means that the LSP sent out each interface is different in TLV 132 field.
You can see with sh isis database detail that each LSP contains a list of IP subnets and associated metric costs this can come from a list of TLV 132.
TLV 128-132 are defined in RFC1195 for IP routing with IS-IS.
IP Interface Address -- the IP address(es) of the interface
corresponding to the SNPA over which this PDU is to be transmitted.
x CODE - 132
x LENGTH - total length of the value field (four octets per address).
x VALUE -
It is TLV 128 that provides metric info for IP.
Hope to help
Giuseppe -
Where is the function show the double in the version 11?
Where is the function show the double in version 11
if you mean show duplicates - this function is gone from iTunes 11
-
Change the functionality of the keyevents according to the scene that it i
I am a student and I am doing my tesis about authoring tools.
I have obtained to give the same functionality to a keyevent for all the scenes, however, I am trying to change the functionality of the keyevents according to the scene that it is at the moment but I dont know how to do this.
can anybody help me???Thanks for your help.
Could you help us in a specific issue? We have three scenes. Hscene_1, Hscene_2, Hscene_3. Pressing the green button we want that; if I am in the Hscene_1 it passes to Hscene _2 and if I am in Hscene_2 it happens to me to Hscene_3
we are waiting your answer.
Thanks -
How can i reverse the function of the curves in the modify curves dialog
in much older version of PS, there was a little set of arrows to reverse the function of the curves in the modify curves dialog. i miss this greatly, since I've been using them opposite from the standard direction for over 20 years.
Any way to switch this in CC?' -
Who can tell me what are the functions of the following subdirectories?
Who can tell me what are the functions of the following subdirectories? How are they classified?
oracle@hostp ~$ cd $ORACLE_HOME
oracle@hostp db_1$ ls
{color:#0000ff}
assistants demo jdbc network oui slax
bin diagnostics jdk nls owm sqlj
cdata has jlib oc4j perl sqlnet.log
cfgtoollogs hostp_db10g jre odbc plsql sqlplus
clone hostp_rcatalog ldap olap precomp srvm
config hs lib OPatch racg sysman
crs install log opmn rdbms uix
css {color:#000000}install.platform{color} md oracore relnotes wwg
ctx inventory mesg oraInst.loc {color:#ff6600}root.sh{color} xdk
dbs javavm mgw {color:#ff6600}ord root.sh.old{color}
{color}
dbs javavm mgw ord root.sh.oldHi,
Here we go:
- assistants: configuration Assistants
- bin: binaries for all products
- ctx: interMedia Text cartridge
- dbs : contain initsid.ora, lksid (initiation files, password files,etc)
- instal:l install related files
- lib: Oracle product libraries
- jlib: Java classes
- md: Spatial cartridge
- mlx Xerox: Stemmer (for interMedia Text cartridge)
- network: Net8
- nlsrtl : NLS run-time loadable data
- ocommon: common files for all products
- odg: data gatherer
- opsm: Parallel Server Manager Components
- oracore: core libraries
- ord: data cartridges
- otrace: Oracle TRACE
- OPatch: Patches to the DB
- plsql : PL/SQL
- precomp: precompilers
- rdbms : server files and libraries required for the database
- slax: SLAX parser
- sqlplus : SQL*Plus
For more Information you can refer to:
- http://www.stanford.edu/dept/itss/docs/oracle/10g/em.101/b12140/3_oui_oracle_homes.htm
- http://www.dba-oracle.com/linux/important_files_directories.htm
Cheers,
Francisco Munoz Alvarez
http://www.oraclenz.com -
Can someone explain the functionality of the 50-pin connector inside the SCXI-1600 board
Hello,
please explain the functionality of the 50-pin connector inside the SCXI-1600 board.
I would like to have the pinouts (explanation) of this particular connector
kind regards
the lab mouseHi,
Using the SCXI-1600 for anything other than controlling a SCXI chassis is NOT supported by NI!
The SCXI-1600 is based on a 16-bit MIO board. There is some additional functionality that is not used while controlling the SCXI chassis. The SCXI-1600 has 8 analog input channels, 8 DIO channels, and 2 counters; there is no analog output support on this board. There is a 50-pin connector inside the SCXI-1600 that can be used to access all of these channels.
Through Daqmx and Internal I/O filtering you can access these channels trough software. There is no pin-layout available because we do not support this.
Regards.
JV
NI Belgium -
I just purchased my first iPad (the new one) and a wireless keyboard. Is there a keyboard usage manual available anywhere that shows the functions of the keys? The info that came with the keyboard was very basic and my searches have been unsuccessful.
If you are using a Bluetooth keyboard on your iPad device, you should take advantage of the keyboard shortcuts for quicker access to copy, cut, paste, undo, redo, and other commands.
Command + C : Copy Selected Text
Command + V : Paste
Command + X: Cut Selected Text
Command + Z: Undo
Command + Shift + Z: Redo
Command + Delete: Delete everything to the left of the cursor on the current line
Option + Delete: Delete the word to the left of the cursor
Command + Up Arrow: Go to top of document
Command + Down Arrow: Go to bottom of document
Command + Left Arrow: Go to beginning of current line
Command + Right Arrow: Go to end of current line
F1: Dim screen
F2: Brighten screen
F7: Back one song
F8: Play/pause song
F9: Skip song
F10: Mute
F11: Decrease volume
F12: Increase volume
Eject button: Show or hide onscreen keyboard
Cheers, Tom -
HT201150 the function of the power
can can you switch the function of the power to where you hit it once it brings up the dialog box and holding it for 1.5 sec will put the mac to sleep
In System Preferences > Keyboard uncheck Use all F1, F2, etc. keys as standard function keys.
Maybe you are looking for
-
How can I get my App Store app back after my daughter deleted it?
My daughter somehow deleted my App Store app off my iPad. How can I get it back.
-
Apache web server not working...PLEASE HELP!!
I'm trying to get apache working on my Mac so I can host a website that will access a local MySQL database. I've researched this for a while. When I run the command: #sudo /usr/sbin/apachectl -t I get the following output: httpd: Syntax error on line
-
Using my iPad to stream music.... Bluetooth or airport express
Hi I have a nice hifi system and use it for listening to cd's when I want to listen and also stream from my iPad when I want background music and to run play lists etc. Can't do away with my cd's as I want audiofile quality for serious listening and
-
hi guys can you tell me the purpose of https(AXIS) Adapter and wat is the differewnce between a plain Http adapter and AXIS one...
-
Moving Previous Photos, etc. to iCloud?
So, I recently bought a MacBook Pro and set up the iCloud feature. I've also had a iPhone for a few years and I have tons of photos and documents, etc on it that I would like to put in the cloud. Is it possible to move these files into my cloud, or w