None of the functions on my NI mydaq are working

I've used this device plenty of times and had no problems and now it's not working.

soooo .... Plugged in?  Turned on?
What changed?  Setup?  Software? 
Any "events" happen - power surge/outage, connect something to something you shouldn't have?
Tried the hardware on a different computer?
Done any troubleshooting in MAX?  Does it show up in device manager?

Similar Messages

  • NONE of the buttons on my curve 8520 are working. HELP!

    So, today I pulled out my phone and the screen was black. I took out the battery, put it back in and the LED just kept blinking. I pulled the battery out again and left it for a bit. It turned on, when it turned on my phone was locked. I couldn't press any buttons. No matter what it was, the four buttons on the top row, the trackpad or any of the keys weren't working. My phone still turns on normally but none of the buttons work. 
    I have a Curve 8520.
    Thanks.

    Im having the same problem,Not sure what to do..Good luck
    Twisted Gypsy

  • After upgrading to 3.6.8 none of the plugins load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log.

    After upgrading to 3.6.8 none of the extensions load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log. All extensions are listed in Addons>Extensions.
    == This happened ==
    Every time Firefox opened
    == Upgrading to newer Firefox version (3.6.8)

    I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
    iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
    My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
    I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
    My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
    Did you ever find anything more to this?

  • None of the "option + number key" mappings seem to work

    Hi,
    I am trying to use the *Canadian French - CSA keyboard layout* and none of the *option + number key* mappings seem to work.
    For example, when I type *option + 2* (in the "Canadian French - CSA keyboard layout"), it should print @ but instead nothing is printed and I sometimes hear the alert sound.
    Spaces is not activated and no keyboard shotcuts are assigned to the keys.
    In the keyboard viewer I can see the keys light up when I type the combinations but still, nothing happens.
    Even if I press option and click the 2 (@) with my mouse in the keyboard viewer, the character will not print!
    All other *option + key* mappings seem to work, the problem is only with number keys.

    Try this:
    http://matthieu.yiptong.ca/2009/09/09/canadian-french-keyboard-layout-for-mac-os -x/

  • HT1414 My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to all upon and need the r

    My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to call upon and need the restore to retrieve info onto my phone, I am a real novice to this...... please help, !!!!

    If anyone else is looking for a solution to this same problem, I was able to get it working looking through several older discussions.
    The solution was to use the password that I had on my iTunes account the very first time I set up the iPhone about a year ago.  I changed my iTunes password about 10 months ago;  but apparently, the backups continue to use the password that existed when the phone was first set up.
    A couple of troubling things with this are that 1) I didn't apply a password when I did the backup this afternoon so I don't understand why it was required when I did the restore a few hours later. and 2) it makes zero sense why iTunes would not be smart enough to use the current accout password when requiring the password to restore from a backup made with no password. 
    I thought iTunes and Apple were smarter than that.  With so many posts stating exactly the same problem, it is clear that this is bug in the software. 
    Best,
    Craig

  • None of the function keys working

    None of my functions buttons are working and I have tried turning on the "use all F1, F2, etc. keys as standard function keys" setting but it didn't do anything. I think I might have accidentally done something in the system preferences, but I'm not sure what. Does anyone know how to fix this?

    You could begin with the SMC reset:
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
    Lex

  • Crystal 8.5 (Minimum function in the function tree does not appear to work)

    HI I would greatly appreciate some help with this problem I am having.
    I am creating a report in which there is a group of records printed . Within each record there could be any number of results related to that record of which I want to extract both the maximium and minimum value and print these. This bit is fine as I do this using the maximum and minimum function available within the summary function.
    However with each of these max and min values calculated and printed I then want to create a footer that adds all these max and min values up. (This is not immediately possible using the 'summary function' max and min values as they are not presented on the 'Field explorer' dialog box for selection.
    However I can individually using the maximum 'tree function' get the report to store these values so that I can do the calculations once I have got to the footer (as the  fields defined are accessible through the field explorer. But the same minimum function does not appear to extract a result (and no I do not have zeros in the data).
    Is there a known problem with the minimum function?
    Is there another way of getting this data?
    Thank you in advance
    seyviv

    Hi Debi, it would be easier for mean to demonstrate what I wnat/am doing in the report by use of data.
    I have a file with a list of sample results. There may be many results for one sample. ie
    Sample      Result Number      Result
    98-01          1                           3
    98-01          2                           5
    98-01          3                           6
    98-02          1                           3
    98-02          2                           7
    98-02          3                           9
    98-03          1                           4
    98-03          2                           5
    98-03          3                           11
    On the first page I want to see the max and min values across all samples listed for each result number. Then as a total value (once all the result numbers max and mins are displayed I want to perform a calculation on the max and min values displayed in the list (ie. max 4 + 7 -11  and for min 3 + 5 - 6)  
                          Result 
                          Number        Max           MIn 
                          1                    4                3
                          2                    7                5
                          3                    11              6
    Result of                             0                2
    Calculation
    I have been able to do this for the max values but the minimum function does not work.
    How I currently extract this data is that I use a 'Summary field ' to calculate the max and min values in the list. However to get the data for the calculation at the bottom I use the 'Formula fields' to extract the values listed for all the results for 'result number 1, 2 & 3' and then use the 'Function tree' to get the 'Maximum value for each individual result number and then finally do a calculation on the max values. However, the same minimum function does not appear to work.
    I hope this explains what my problem is.
    Thank you in advance of any suggestions you may have
    Regards
    Viv

  • Since the FF8 update, all bookmarks were lost and none of the recommended methods for restoring lost bookmarks work; I always get "Unable to process to backup file" even though the backup .json files still exist

    Since a FF8 update, all bookmarks were lost and none of the recommended restore methods work, even though I have been able to find the backup ".json" files; I continually get "Unable to process the backup file" for all methods of importing or restoring the bookmarks from the .json files. As others note, I can also no longer add any new bookmarks to my now empty bookmarks tab. My profile has not changed, so that's not the problem. This is really a pain.

    Did you try to delete the file places.sqlite to make Firefox rebuild the places.sqlite database file from a JSON backup?
    *http://kb.mozillazine.org/Unable_to_process_the_backup_file_-_Firefox
    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_places-database-file

  • Redirect page to x page= none of the url title of x page are displayed

    Just wondering if anyone knows how to help me. I host my
    pages .com, but have only registered the domain .co.uk elsewhere
    and redirect it to the .com domain. When i now access the .co.uk
    page, it redirects, but none of the url title of the .com page are
    displayed. Do you know how to correct this?
    Thanks

    .oO(lukey233)
    >Just wondering if anyone knows how to help me. I host my
    pages .com, but have
    >only registered the domain .co.uk elsewhere and redirect
    it to the .com domain.
    >When i now access the .co.uk page, it redirects, but none
    of the url title of
    >the .com page are displayed.
    Then it's not a redirect, but probably just a frame.
    >Do you know how to correct this?
    Can you post a link?
    Micha

  • Why do none of the play, pause, menu, end action etc. work when I try to preview?

    First time using adobe encore CS5 and cannot get the preview screen to do anything.

    OK, I can see more now - thank you.
    In your words, describe your Project, and how you wish for navigation to proceed.
    Looks like you have one Timeline (Airline Leather), and one Menu with only the one Button to link to that Timeline. Is that correct?
    I have to admit that CS5 has changed a bit of the display in Flowchart from my version, so I might be a bit confused. Still, if you outline the Project and your Assets, plus what you would like to have happen, we can step you though getting that, and getting your Project burned.
    One rec. that I'd like to make, as it will help you so very much - much more than Adobe Help will be able to: Jeff Bellune has written a book, The Focal Easy Guide to Adobe EncoreDVD 2.0, Focal Press. Though for an older version of Encore, everything in his book still applies, as it is all about the DVD-specs., and how Encore interfaces with those. That has not changed version to version. Some things HAVE been added, but the Help files cover those aspects. There is not better book on working in Encore.
    Also, that "drawing" that you mention is the use of the Pickwhip - the little spiral icon, and it still works, just as with older versions of Encore. One can also do the linking via the Properties Panels, and the drop-downs for many links. Even more, one can also choose Specify Link to get even more precise choices, like linking to a specific Menu with a specific Button selected.
    Good luck, and let us know more about that Project, the Assets and what you want to be able to do.
    Hunt

  • None of the buttons on my Torch will not work - phone inoperable

    The buttons on my Torch will not work...I can receive calls but can't answer them. I cannot do anything with the phone...it is fully charged - HELP! I am traveling and this is now critical!

    I don't have a 9800 here to test, but if you keep the keyboard closed, isn't there a onscreen enter key?
    Normally the buttons not workng is indicative of moisture issues. It sounds like what I have seen multiple times on a device with moisture damage.
    Even sitting on a bathroom counter during a hot steamy shower or bath can cause keyboard and trackball problems UNTIL properly dried out. It really is more common than you think.
    1. Remove the battery immediately!! Do not attempt to turn on your BlackBerry.
    2. Let the device dry in a warm, dry place for 3 to 5 days* (see below)
    3. DO NOT "check it each day" by placing the battery in. Leave it be to dry completely. This takes time. Replacing the battery to check it can only damage it more (moisture + electrical current = disaster).
    4. If the device is warm after the drying period, allow it to cool to room temperature before placing the battery back in.
    Suggestions on drying your BlackBerry in a warm place (open, with the battery out):
    *Place the BB in a container of dry UNcooked rice, and then you might also place it in any of the locations mentioned below.
    *On top of any dry heat emitting electronic component: TV cabinet or CRT, LCD, cable TV/Satellite converter box or plasma monitor
    *On the dashboard of your car on a sunny day
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Just bought 3 ipads at the flea market over the weekend. all 3 were in unopened boxes. 2 of the ipads synced just fine and are working great. the 3rd however says it is linked to an email already. does this mean it is stolen or what

    just bought 3 ipads for the family over the weekend at the flea market. they were all in closed sealed boxes. 2 ipads synced just fine and are working great. the 3rd however is being an issue. it says that it is already linked to an email. does that mean it is stolen? all material and serial nu,bers match up everywhere. was wondering if this could be fixed by me, apple store, or should i be a good samaritian and turn it over to the police with the receipt and where and who i bought it from?

    Or it could simply have been sold by someone that didn't know enough to wipe it.
    You could check with the police, see if they have it listed as stolen.
    If you can get into the settings of that ipad you can 'erase all content and settings' and start fresh.

  • HT4628 i have a macbook pro which an you help me?shows the wifi bars with an ! in the middle, all my other devices are working off the network, c

    I have a mac book pro with an ! in the wifi bars, all other devices are connected to the net work, cannot connected to a hot spot, can this issue be fixed

    You could try this:
    Apple menu / System Preferences / Network.
    Here select Wi-Fi on the left, and click the Assist me... button on the bottom, then click Assistant.
    Follow the directions on the screen.

  • None of the functions in the sample editor are appearing

    Every time i go to the sample editor the editing functions are all greyed out, with the exception of gain I am using some of the logic content
    Is there an easy way around this? Did I not correctly install the au stuff?

    sounds like you are editing an apple loop. those cannot be modified without bouncing the loop in the arrange, and reimporting it

  • My mac book will not power off, none of the function under the apple respond?

    Any body know how I can turn off the computer from this state - the menu under the apple is not responding and so I cannot "shut down" my mac book pro?

    Thank you, that worked just fine...
    Regards

Maybe you are looking for