"None" option not available.

I am trying to setup my account withou attaching a credit card. I've been told to select the "None" option, but I am not getting that option to choose. I am only able to select from the different credit cards or PayPal. WHat can I do? Thanks.

Are you trying to create an account in the iTunes Store, or in the App Store? If you're going to the main iTunes Store, you may not be able to select "none" as an option since the iTunes Store is required to verify your country of residence which takes some sort of payment method; a credit card, prepaid iTunes card, gift certificate, or PayPal account. Once you set up an account with a credit card, you can usually then go in a remove the card information (the option for "none" probably will then appear) if you don't want your card information sitting in the iTunes Store.
If you only want the free iPhone apps, take a look here:
http://support.apple.com/kb/HT2534
Read the steps carefully as the order in which you follow them is apparently critical. This seems to come and go, or only apply to App Stores in specific countries, so you may not see the option for "None" when asked for a payment type.
Note that this only applies to the App Store; you will not be able to get any of the free content in the iTunes Store without entering in some sort of payment method (credit card, prepaid iTunes card, gift certificate, etc.)
Regards.

Similar Messages

"none" option not available = aggravated customer

i recently put my Visa Gift Card to use on itunes, but i used it all up. So i went ahead and bought an Itunes Gift Card, thinking i could buy more music, apps, etc.. so i tried to purchase a song , but it wouldnt let me because my "credit card" information is not correct. Now i understand that i cannot change it back to "none" and that aggravates me. Does Apple not realize that they're going to lose alot of costumers because they did the same thing i did, but they wont be able to buy music anymore unless they create a new account. And i refuse to create a new account because i have $25.00 worth of credit from my itunes giftcard that i CANNOT USE. And i dont want to put in my actual credit card because everytime i purchase something, it will take it out of my credit card, not from the $25.00 i have from the itunes card. I dont know why Apple decided to remove the "none" selection for existing users. i think its absurd. And this adds to my "list of issues" with Apple. I am highly considering switching back to Android because i never had any problems like this. I know i sound like a stuck up nag, im sorry, but i am just frustrated. It feels like Apple wants to trick us into using our credit cards so that later, we wont have an option to cancel it, so they could get more money out of us. All i want, is to be able to use my $25.00 credit, otherwise, i just spent money for nothing, and my itunes credit will just sit there forever.
Sorry for being so dramatic, im just really mad.

There is a specific reason why 'none' is not available here. Check with
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Credit Card "NONE" option not available in itunes 10.6.1

Hi
I just purchased IPod Touch but when i created Apple ID it requires credit card info in the review account section. i dont have credit card, i need help any one please.
I already read on the internet and try everything but all in vein, I have apple itunes 10.6.1.
In the credit card seletion "NONE" option is not available.

iTunes Store: Changing Account Information
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card

Apple id without credit card none option not available

Hi,
I was trying to figure out a way to create a apple id without a credit card. So Google and all of them suggest that if you select an free app to install and login with your new id you will see "None" payment option but that didn't work.
But i want to share with all what work for me.
1. Open your itunes make sure you logout
2. Select the App Store and in Quick Links select "Redeem" as below image. Now login with your new Apple ID and you will see "None" Payment option.
Thanks
Nitin B.

If you follow, exactly, the instructions on to this page when creating a new account then you will get the 'none' option : Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card

TS1646 How to remove credit card details? "None" option not there

How to remove credit card details? "None" option not there

Same here I can't update or download anything

Preview on [device name] option not available

Preview on [device name] option not available on Folio Overlays

In v20 its available in the Folio Builder panel (iPad only, I think). You have to plug to your Mac to the iPad with the USB cable and starting the Adobe Content Viewer app on the iPad first. Otherwise check iTunes on your Mac if your iPad is listed under "Devices".
Are you using InDesign CS5.5 or InDesign CS6?
You have to be up to date with the Overlay Creator panel to v20 as well. Check for that.
Recently I had no chance with InDesign CS5 and the v20 tools installed on a Mac with OSX 10.5.8.
Uwe

I have the latest version of photoshop cc . Why is the focus select option not available ? (for selecting the in focus area)a)

I have the latest version of photoshop cc. Why is the focus selection option not available ?

Use CC 2014 menu Help>System Info... use its copy option and paste the info here. So we know your running CC 2014 not CC and that you have an enabled GPU....and latest device drivers.

Outboung Campaing: Error Unable to communicate with Enterprise Server. outbound Option not available

Hi everyone,
I'm running UCCX 8.01 + CUCM 7.1+ Cisco 7942 just for learning purpose. After creating the Outbound Campaign and imported the Contact List the call is received by the agent (call is state is received as Offering) but after press the Accept, Reject or any othe action button is received the error:
Error Unable to communicate with Enterprise Server. outbound Option not available (attached to post).
What does this mean?
Regards
Please rate all useful posts
Favor calificar todos las respuestas útiles.
LinkedIn Profile: do.linkedin.com/in/leosalcie
MDGDP, CCNA, CCNA Voice, CCNP Voice Certified

Any idea?
Please rate all useful posts
Favor calificar todos las respuestas útiles.
LinkedIn Profile: do.linkedin.com/in/leosalcie
MDGDP, CCNA, CCNA Voice, CCNP Voice Certified

WLAN override option not available for WLC 4402 - 6.0.196.

Hi All,
Its kind of weird BUT it seems that the option for WLAN override is missing.u.
I could find it on the lower version BUT not on the 6.0.196.
Please help.
Does this mean I could only set it up via the WCS and not the WLC directly.
Thank you.
Warmest Regards,
Azzafir Ariff Patel.

Hi Scott,
Thank you so much for the clarification.
Thanks again.
Quoting fella5 :
azzafir,
>
A new message was posted in the Discussion thread "WLAN override
option not available for WLC 4402 - 6.0.196.":
>
https://supportforums.cisco.com/message/3042635#3042635
>
Author : Scott Fella
Email : [email protected]
Profile : https://supportforums.cisco.com/people/fella5
>
Message:

Option not available to add skype to go number in ...

Option not available to add skype to go number in canada.... Urgent its been 1 week

venkatesh wrote:
Option not available to add skype to go number in canada.... Urgent its been 1 week
Skype To Go numbers are available in the following countries:
Australia
Canada
Chile
Denmark
Estonia
Finland
Greece
Hungary
Ireland
Latvia
Lithuania
Luxembourg
Mexico
New Zealand
Poland
Portugal
Romania
Slovenia
Singapore
South Africa
Sweden
United Kingdom
USA
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

To remove credit card details when none option not there

to remove credit card details when none option not there

If "none" is not an option, your latest order is unpaid at the moment (due to payment issues). You can check your purchase history to find out, if it's so. Please follow:
http://support.apple.com/kb/HT2727?viewlocale=en_US
If the latest order is unpaid, you have to choose another valid payment method like another credit card or you can redeem an iTunes Gift Card (if supported in your country). After the order is paid, you can choose "none".

HT204053 iCloud option not available on MacBook Air

Why is the iCloud option not available on my MacBook Air? It's not under the System Preferences in the Apple dropdown...only the MobileMe options are still there.

r_lopez wrote:
Why is the iCloud option not available on my MacBook Air? It's not under the System Preferences in the Apple dropdown...only the MobileMe options are still there.
iCloud won't appear in System Preferences in Snow Leopard. But, you can get some of the features of iCloud working with 10.6.
Mail AND iCal work just fine. See this article: http://bit.ly/LvVCR2
I use the iCal info on two of my own Macs and it works fine. The Address Book hack is a maybe. Read through the comments associated with the blog entry. Some folks have gotten the AB hack to work by locking the plist file.

System copy : As Java : Non-unicode kernel Option not available

Dear All,
we are performing AS Java system copy to create a new system , same SID , same HOST and same Configuration except OS is upgraded.
Susle Linux OS - 11 SP3
As Java Nw 701
kernel version -
NW701 - Kernel 721_Ext - Non_unicode - 201 patch level
We have successfully completed export and now we are importing the same export in new server,now while performing taget installation we are not getting option to install NON UNICODE kernel , except it is only asking for UC Kernel 7.20/7.21.
Current version of system is non-unicode and we will like to keep it that way.
May I know is non-unicode system copy option is not available? is it removed ?
and if we want to install non-unicode then how we can perform that ?
Can we install target system using UC kernel and later just perform NON-unicode kernel upgrade, will this work?
Has anyone faced such concern?
Guidance will be appreciated.
Regards,
Bond

Thanks for update RB.
We have tried this method as in we stop SAP and sync file systems and perform DB/Backup restore method. This method works but unfortunately I am not able to find any SAP relevant document to support this method for so called "java" systems.
SAP only suggest to perform system copy for "java" hence we are trying via export import. Currently I am looking into options of using old master installation software.
although, can i request you if you any SAP relevant note or kba or any other in which SAP support/suggest we can perform file system copy and db restore for "Java" systems then it will be just a thing which I need to go ahead with method you suggested.
Thanks , kindly update.
Warm Regards,

NoSOAP envelop option not available in CC

Hello,
We were on XI stack 12 patch and patch level 3 for adapter framework, and the checkbox option to choose the noSOAP envelop was not available. We have been advised by SAP tu upgrade our XI to a minimum of patch level 5. We have done this upgrade correctly but the checkbox option is still not available in the communication channel.
Has anybody already come through this issue or has any clue ?
Thanks in advance,
Best regards,
Guislain

Hello Krishna,
Thank you for your quick answer, but we have already come through these notes and none of them help.
Best regards,
Guislain

Exchange 2007 Client Access and Receive Connector options not available (EMC)

We have a SBS2008 server with Exchange 2007
When I open the EMC and go to Server Configuration --> Client Access, none off the options are available (greyed out). OAW, OWA, ActiveSync are working without any problems. Outlook anywhere enabled shows False,when I try to reanable it I get the following
error message:
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:01
SERVERNAME
Failed
Error:
The Active Directory object for virtual directory 'IIS://SERVERNAME.domainname.local/W3SVC/3/ROOT/Rpc' on 'SERVERNAME' could not be created. This might be because the object already exists in Active Directory. Remove the object from Active Directory, then re-create
it.
Unexpected Error
Warning:
Outlook Anywhere will be enabled on your Client Access server after a configuration period of approximately fifteen minutes. To verify that Outlook Anywhere has been enabled, check the application event log on server SERVERNAME.
Exchange Management Shell command attempted:
enable-OutlookAnywhere -Server 'SERVERNAME' -ExternalHostname 'mail.domainname.net' -DefaultAuthenticationMethod 'Basic' -SSLOffloading $false
Elapsed Time: 00:00:01
Also the receive connectors are not visible from EMC, it's just blank under receive connectors, but mails are received without any problems.
Does someone know a way to resolve this?

That worked!
I created a new account and placed it into the Exchange Organization Administrators role, now I'm able to see all the options normally.
I also re-added the original account to the EOA role but I still don't see the options there. When I go to Organization Configuration I also get the following error message:
You do not have permissions to read the security descriptors on CN=servername,CN=Server......DC=domainname, DC=local. It was running command 'get-ExchangeAdministrator'
So it must be a permissions issue. The strange thing is that under Exchange Administrators I can see my account and it has the role Exchange Organization Administrators.

"None" option not available.

Similar Messages

Maybe you are looking for