Noob creating GUI - The easy way?

I remember in Visual Basic it was so easy creating GUI, just point and click, drag, etc. Is there any similar utility for creating GUI for java?

It's worth pointing out that 'click-and-drag' isn't the best way. In Java, components may vary in size between platforms. Even in Swing, components sometimes change slightly in size between releases.
You should take the time to learn how to use the layout managers - it will pay dividends in the long run. I would strongly recommend against using JBuilder's GUI builder until you know how to do it properly by hand. I use JBuilder to assist in building complicated GUIs, but if you don't understand the fundamentals behind the layout managers, the results are likely to be erratic and frustrating.

Similar Messages

  • What is the easier way to turn voice controller off?

    what is the easier way to turn voice controller off?

    you can turn of the voice dial but as far as i know you can not turn off the voice controller
    if you want to turn of the voice dial just go to setting then to general after that to passcode and turn off the voice dial option

  • What is the easy way to create a crossword with InDesign CS5 for a interactive pdf?

    I mean I want to create a pdf magazine and i like to include a crossword. I read somewhere that one way is create a crossword with an external software and include it in the ID project but I don't know any crossword software and if I add in my ID project, I only need to export like a interactive pdf? I would like that the users can use the crossword in online version.
    Regards from Lima, Perú

    Hi.
    I'm not sure about what to you mean. But I create first the crossword with Excel, I mean to put the words in the right order and the questions and/or cue too. Then I create a table in InDesign and format some cells with black background and some borders. I upload both captures, from Excel and from InDesigne. Then with Adobe X Pro I create a form, so I can create singles inputs for the crossword.
    I hope i understand your question.
    Regards from Lima, Perú

  • What is the easier way to edit a captured slide?

    I have created a demonstration animation and there are several slides that need a little graphics editing.
    So far, I have not found a way to automate the process of editing slides.
    The only method I can determine is by selecting "Copy Background", then opening a graphics editor, pasting to a new window, edit accordingly, save the edited graphic background, import into the slide.
    Isn't there anyway to edit inline?.. meaning, the background is automatically sent to your choosen graphics editor, you edit the graphic, click save/exit, and the graphics background is automatically updated. That is how Captivate 4's competitors do it.

    Hi Shawn
    It really depends on what exactly you need to do. For example, if all you want is an easy way to blot out some words, use a Highlight Box object at zero percent transparency. Then merge it into the background. Or maybe you need an image added in. Add the image separately and merge it.
    Last week we needed to render an option button as unselected. In that case I just right-clicked and opened in Microsoft Paint. Duplicated another and overlaid the errant one. Closed and saved. Total update time from start to finish was less than two minutes.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • What is the "easy" way to get to 3.1.2?

    I've "loved" the Oracle database for many years, and is thrilled with Apex. I no longer work as a DBA, but tries to keep my technical stuff close.
    I have an Apex 2.1 installation on an 10g database on Ubuntu 8.10 server. I did the lazy install then, and installed via aptitude (more or less automated install).
    I would like to install 3.1.2, but must admit I almost lost courage when I read the requirements.
    My Oracle install right now can be discarded, so I wanted to ask: what is the easiest way for me to get 3.1.2 installed on Ubuntu?
    Install the latest version of 11g? Run a magic script, that automates all that Oracle exhaustively describes?
    Thanks in advance
    Yours
    /Kim
    End note/rant: given that oracle can describe everything in such details, why oh why, not just build an installer around it?! the chances of errors are multitudes greater with all these nitty gritty commands. My SQL Server DBAs routinely updates, installs and patches SQL Server without much of a hassle. Oracle DBAs gets ticks thinking of the testing needed...

    Just to be clear, you're probably running Oracle Express Edition, or "XE" based on the fact that you installed it via aptitude and it has APEX 2.1 pre-installed. It may say 10g when you login, but please refer to it as XE in the forums so people know what db they're dealing with.
    There is no "easy" way to magically install 3.1.2. You have to follow the install guide to the letter now matter what path you take. Even if you install 11.1, it only has APEX 3.0 pre-installed. Even though I really prefer 11 to 10, I think your best off sticking with XE, especially since there are no licensing issues. For what it's worth, I've suggested that APEX needs a GUI installer (such as Oracle Universal Installer) for several years now since the install / upgrade process can be a bit daunting. Until the community demands it, I don't think it's going to happen, so please, speak up if you think the install process is too hard.
    Tyler

  • The easy way?

    I must admit that this has saved me hours of time and ultimately brought me out of Flash retirement.
    My question is this.
    When creating a portfolio with thumbnails as buttons that change a larger image to what the thumbnail displays. Am I doing this right by creating several pages just to make an image appear for each individual image? Seems like allot to me and wondering if there is an easier way to accomplish this.
    Also wondering if I should optimize the jpegs in Catalyst?
    To see it working its located it www.smakdigital.com
    Thank you.
    Osiris

    Hi Osiris,
    >> I must admit that this has saved me hours of time and ultimately brought me out of Flash retirement.
    Glad to hear it!
    >> Am I doing this right by creating several pages just to make an image appear for each individual image?
    Pretty much, yes.  Here are two ways to improve on your approach, however:
    Place the thumbnails into a Data List.  This makes it less work to edit things like item spacing/layout, or the selection highlight, since you don't have to do it once per thumbnail image.  To display a different full-size image depending on which list item you clicked, create a series of "On Select" interactions using the "When a specific item is selected" option.
    Put your image gallery into a custom component and have one state in the component for each image.  This keeps your list of top-level application pages/states clean, so that if you later decide to add other screens such as contact info, info page, etc., they're not all mixed in alongside your image-specific states.
    >> Seems like allot to me and wondering if there is an easier way to accomplish this.
    We here on the Catalyst team agree, and are looking into ways of making this simpler in a future version!
    >> Also wondering if I should optimize the jpegs in Catalyst?
    You should definitely optimize your images for the web by adjusting the resolution and compression settings.  You can do this within Catalyst, or within the original tool that you used to create the jpegs (e.g. Photoshop's "Save for Web" command contains all the same optimization controls, and then some).
    Hope that helps!
    - Peter

  • TV Tuner - The Easy Way

    If you have ever struggled with that age old question, "How do I get a TV Tuner to work reliably in Linux", I found a great solution that really works for me.
    It's called the Viewsonic N5 TV tuner/video processor.  I wrote a brief review of this tuner solution for bsdgangster.org.  For those interested, you can read it here:
    http://bsdgangster.org/modules.php?name … ticle&id=9
    --Theoden   :shock:

    Hi Osiris,
    >> I must admit that this has saved me hours of time and ultimately brought me out of Flash retirement.
    Glad to hear it!
    >> Am I doing this right by creating several pages just to make an image appear for each individual image?
    Pretty much, yes.  Here are two ways to improve on your approach, however:
    Place the thumbnails into a Data List.  This makes it less work to edit things like item spacing/layout, or the selection highlight, since you don't have to do it once per thumbnail image.  To display a different full-size image depending on which list item you clicked, create a series of "On Select" interactions using the "When a specific item is selected" option.
    Put your image gallery into a custom component and have one state in the component for each image.  This keeps your list of top-level application pages/states clean, so that if you later decide to add other screens such as contact info, info page, etc., they're not all mixed in alongside your image-specific states.
    >> Seems like allot to me and wondering if there is an easier way to accomplish this.
    We here on the Catalyst team agree, and are looking into ways of making this simpler in a future version!
    >> Also wondering if I should optimize the jpegs in Catalyst?
    You should definitely optimize your images for the web by adjusting the resolution and compression settings.  You can do this within Catalyst, or within the original tool that you used to create the jpegs (e.g. Photoshop's "Save for Web" command contains all the same optimization controls, and then some).
    Hope that helps!
    - Peter

  • I wanna roll back to iOS5 the easy way

    How do we roll back to iOS5, from 5.0.1, that restore is PIA, any easy way? If there is no "easy way" then Apple should find one, it helps when ever their updated OS creates more issues, it should give an option to roll back to previous OS, as easily it  a 50mb update installs, using just wifi, that's all we want..

    You can't. You can't roll back by any Apple-approved method. And if you did chances are it wouldn't fix whatever your problem is. If you have issues with 5.0.1 fix them as most others have. There's nothing wrong with the release, only with your phone.

  • Image objects following each other--the easy way?

    I have a series of images that scroll up the screen. There are 35 or so of them and they follow each other like a filmstrip. I have been creating one layer and copying one motion path for each, staggering them in the timeline. This works great, but it's a drag if I decide to change the timing. I then have to go to each one and move it individually.
    Is there an easier way?

    well if your images are a fixed size, it should be too hard to work out the offset for each. But you can move the parent group around as you arrange your images, and then move it back to its start position when you're ready to roll (pun intended).
    I liked specialcases solution though, seems tricky to set up if you're unfamilar with the replicator but powerful. And once set up it woul dbe easy to replace the images at any later stage.
    adam

  • I need to ADD and COMBINE parts of a Font or Shape the easy way...

    I need to delete points, or parts of a font, or add to them in a really quick way, I have done it by hand, but it takes too long, plus, I have a lot of these to do.
    It's actually deleting some of the font, then adding to it.
    I have a LONG description in the link below, also an image that probably says more than I did... :)
    I know it's probably way overkill in my description, but please bear with me on this, I'm honestly trying to word it to help, hopefully I am not scaring people off.
    http://www.recentabstract.com/type.html
    Thank you for you help, it's really appreciated.
    Randy

    Shown are explicit steps, for clarity. Because you said you have alot of these to do, familiarize yourself with the associated keyboard shortcuts to make it quicker. (For example, Ctrl-clicking the top row of Pathfinder icons--which are not really Pathfinders, but Shape Modes (sigh)--applies them and expands them in one step.
    You can further streamline the process with a little forethought. (For example, set up a Graphic Style for the red stroke/none fill.)
    With a little cleverness, you can probably devise a Graphic Style and an Action or two to semi-automate the process further.
    Think about the individual steps and see if you can batch-process them; for example, create all the text objects and rectangles first, then do the operations on the various groups. (That's where recording an Action could make this very quick.)
    Note that the steps shown assume the laser engraver follows paths (as does a plotter), not mere display. If that is not the case, then overlapping objects may not be a problem, and some of the steps may not be necessary. In fact, if mere visual appearance is what drives the thing, then a Graphic Style including a couple of live Effects could yield the appearance, and the text could remain editable. The rectangle
    could be added as an Effect (Convert To Shape), but its position probably needs to shift depending upon the text characters.
    You are to be applauded, by the way, for taking the time to clearly and fully describe your problem. Better to go overboard than the far more usual "How-do-I-make-the-thing-I'm thinking-about-but-am-too-lazy-to-explain" kind of questions. ;-)
    JET

  • Clearing Duplicates the Easy Way

    Due to a rookie consolidation move, I've got duplicates of most of my music in my iTunes Music Folder--all in the same file. The duplicates I'd like to get rid of all have a "1" tacked on to them, like this:
    03 She's Lost Control.mp3 (original)
    03 She's Lost Control 1.mp3 (duplicate)
    I'd like to clear up space by removing all of those "1" duplicates, but I've got a ton of music to go through and select. What's the easiest way to select and delete duplicates?

    Several ways to Clean Up Your Library by Removing "!" or ‘dead links’ within iTunes:
    If you move, edit, delete or otherwise change a music file listed in the iTunes Library with a program or tool other than iTunes, you may end up with a "!" in front of the song name. iTunes does not keep track of music file changes made outside of iTunes.
    http://discussions.apple.com/message.jspa?messageID=818692#818692
    http://discussions.apple.com/message.jspa?messageID=607582
    EASIER:
    Download this: http://ottodestruct.com/iTunes/RemoveDeadTracks.txt
    Rename it to RemoveDeadTracks.js.
    Run iTunes.
    While iTunes is running, double click RemoveDeadTracks.js to run the script.
    It will remove all the exclamation marked tracks.
    One step, no fuss, no muss.
    Then, give Otto42 a big 'Thanks' for this one.

  • Trim extra spaces (the easy way)

    Sometimes, the fields from my resultset will have extra spaces at the end. Is there an easy way to simply trim the space when selecting a value?
    For instance, say there is extra space on this Date field, is there no trim-space type function?
    <xsl:value-of select="Date"/>
    Thanks,
    TI

    Oh dear. They have lumped XPath 1.0 and XPath 2.0 functions together there, and they don't specify which is which. Chances are you are only using XPath 1.0, so try this link instead:
    http://www.topxml.com/xsl/XSLTRef.asp#Functions

  • Disable Protected Mode the easy way

    I have created a script to disable protected mode in Adobe flash player after it is installed. I see a lot of this being done for various reasons. If anyone is interested in it, as it is a quick and easy way to do so, you dont have to go fooling with OS files.
    You can read about it below
    http://firefoxcrash.blogspot.com/2013/12/disable-protected-mode-in-adobe-flash.html
    Best Regards

    Protected Mode is win only fearture. http://blogs.adobe.com/asset/2010/07/introducing-adobe-reader-protected-mode.html

  • Changing energy saver the easy way

    Is there an easy way to set schedules on workstations? If I knew which pref file contained this info I could copy out that file no?

    don't know what "pmset" means, the provided unix commands don't quite cover what I want;
    start up weekdays at 7:30 a.m., shutdown everyday at 4:00 p.m.
    If I knew which prefs file held that data. I thought it was users/me/library/preferences/com.apple.systempreferences.plist
    but moving that file around doesn't seem to do it.
    If I change the settings manually on a workstation, when logged in as admin, all users inherit this even though prefs file is in admin's own prefs folder.
    coping out the file doesn't do anything though, so I'm either doing the wrong file or something is going on way above my head (no doubt)

  • Gstreamer, the easy way

    Since I like to have a way to install all gstreamer packages, I thought others might like to have them all displayed and formatted for a quick installation.
    All you need is current and extra repo's
    pacman -Sy gstreamer0.10 gstreamer0.10-a52dec gstreamer0.10-aalib gstreamer0.10-alsa gstreamer0.10-amrnb gstreamer0.10-annodex gstreamer0.10-bad gstreamer0.10-base gstreamer0.10-bz2 gstreamer0.10-cairo gstreamer0.10-cdio gstreamer0.10-cdparanoia gstreamer0.10-dts gstreamer0.10-dv gstreamer0.10-dv1394 gstreamer0.10-dvdread gstreamer0.10-esd gstreamer0.10-faac gstreamer0.10-faad gstreamer0.10-ffmpeg gstreamer0.10-flac gstreamer0.10-gconf gstreamer0.10-gdkpixbuf gstreamer0.10-gnomevfs gstreamer0.10-good gstreamer0.10-hal gstreamer0.10-jpeg gstreamer0.10-ladspa gstreamer0.10-lame gstreamer0.10-libcaca gstreamer0.10-libpng gstreamer0.10-libvisual gstreamer0.10-mad gstreamer0.10-mms gstreamer0.10-mpeg2dec gstreamer0.10-musepack gstreamer0.10-neon gstreamer0.10-ogg gstreamer0.10-pango gstreamer0.10-pitfdll gstreamer0.10-python gstreamer0.10-sdl gstreamer0.10-shout2 gstreamer0.10-sidplay gstreamer0.10-speex gstreamer0.10-swfdec gstreamer0.10-taglib gstreamer0.10-theora gstreamer0.10-ugly gstreamer0.10-vorbis gstreamer0.10-xvid

    It depends on the apps that you use. If you use a media player that use it (like listen in community repo), to play a certain file type, you need to have the corresponding plugin installed.  I assume that the advantages are that it's more lightweight and there are probably other reasons (performance?) that I'm not aware of.  Maybe the developers of  multimedia apps find it easier to use gstreamer than the default way.

Maybe you are looking for