Noob help pls.....  Sony DCR HC48

i'm anxiously awaiting the new mbp's and i'm trying to do as much research as possible
as i underderstand imovie08 comes 'standard' with ilife.... i've already searched for other sony mini dv cameras and i couldn't find what i was looking for....
the sony dc hc48 comes with a feature that allows u to record in 16:9 aspect ratio.
if i record in 16:9, will i be able to easily import the 16:9 footage into imovie08?
any help would be greatly appreciated.

Wise choice going with miniDV. You will also need to buy the firewire cable. Sony calls it iLink, if you go with that brand.
16:9 is not a problem for import. You may also want to check out the free download of iMovie HD6, which, in the opinion of many iMovie faithful, is a much better editing platform than iMovie 08. It is timeline based, which is the method used in more expensive editing software, like Final Cut.
http://www.apple.com/support/downloads/imovieHD6.html
iMovie HD6 will only work with miniDV cams, so another good reason to go with miniDV.
Check out other miniDV cams here, as there are other brands, Panasonic for one, that offer 16:9 shooting format. The key question is - Is it true 16:9, or does the camera simply letterbox the 4:3 aspect ratio to give the 16:9 appearance? Top of the line Pannys are true 16:9.
http://www.camcorderinfo.com/

Similar Messages

  • Sony DCR-HC48 Mini DV compatibility

    http://www.apple.com/macosx/upgrade/camcorders.html seems to be outdated. I want to know if the Sony DCR-HC48 Mini DV is imovie/finalcut compatible.
    Omar
    Macbook Pro   Mac OS X (10.4.9)  

    yes, camera IS compatible...
    don't forget to buy a 4/6pin firewire cable at any PC shop..
    or, spend 5x the price for same cable, from Sony, called 'iLink' cable.. ;))

  • Conversion help needed ---Sony DCR-HC30

    I feel like a total dummy here because I can't figure this out .......AND, I have done it before! Its been quite a while and the old brain isn't all it used to be, I guess.
    I have a Sony DCR-HC30 camcorder. I imported a movie I took into iMovie. I edited it and played with it to my little heart's content. It is finished now and I want to run it back through my camcorder, into a VCR to copy it to a VHS tape. I know what you're thinking ......WHY? Answer .....as a gift for my mother-in-law who does not have a DVD. Later, I will record it using iDVD for myself to get the better quality I want.
    So, please, can someone give me complete directions on how to do this????? I cannot find the info in my manual. I have the camcorder connected to my computer via firewire, and the camcorder is connected in the In jacks of my VCR. What am I missing? What mode does the camera need to be in?
    Thanks to any kind soul who can put me out of my misery.
    Kathy

    Hi, Kathy!
    I have the same camcorder and I love it! Just perfect for all this movie-making, and it is great in low light, and small enough to be easy to carry with me.
    Now, there are 2 ways to capture your movie on VHS tape. One is the straight pass-through set up...that you describe. Just put the camcorder in VTR mode and don't put a tape in it. Push record on the VCR and play on the iMovie.
    However, I recommend that you use the method that will take longer. You do it in 2 steps. First, 'share' your iMovie back to your camcorder onto a DV tape. Then, disconnect the camera from the computer and connect it to the VCR using the AV connector that came with the camera. Then record the movie to VHS.
    The reason I recommend this double recording (once to DV tape and once to VHS) is that you will then have a digital copy of your iMovie that you can use again and again to import/edit/re-record/ burn to DVD. You don't have to leave your movie on your computer and risk that it might become corrupted/lost in a computer crash/etc. You will also have a permanent digital copy as a backup. I know, you have the original, but after spending time creating your edited movie, it is very nice to save it.
    I have been copying my old family vhs tapes and photos into iMovie and making DVDs of each year's footage. Some years we were more into movies and photos, so some years take up 2 DVDs. I recorded almost all of the original VHS tapes onto DV tapes to import (yes, about 120 hours so far), and when finished with each imovie, I export the edited version..with titles, transitions, music...to another DV tape to preserve it in that form as well as the DVDs I have made. I guess I am afraid that some newer technology will make DVDs obsolete and I think maybe the DV tapes will last longer. I am working with some VHS tapes that are already 23 years old!
    Anyway, that is my 2cents for you

  • Requesting Help with Sony DCR-HC36 and Premier Elements 8

    First and Foremost, I'm a complete amatuer with respect to video and I'm new to the forum.
    That being said, I'm trying to capture video from my Sony MiniDV camera model # DCR-HC36 with Premiere Elements Version 8.
    Everytime I go to File>Get Media>DV Camcorder, Premiere tells me there is no DV camera connected.
    I'm using an HP PC running Win 7 Home 64bit.  I installed a SIIG PCIe Firewire 800 card into the HP and am using the 4pin to 9pin Firewire cable.
    The Firewire 800 card installed fine.  I can see it in the Device Manager.
    I also tested functionality of the Firewire card by connecting an External Firewire Hard drive. The HD worked perfectly.
    Do I have to install some drivers for the camera itself?  If so, does anyone know what they are and where best to get them?  I checked Sony website and the available downloads are actual programs that I don't really want to mess with.
    FYI, I hooked the camera up to a Macbook Pro, opened I movie and the Mac just about did all the work.  (I know, I know, but please no comments about switching to a Mac.) lol.
    So, I do know the camera Firewire port works fine.
    I look forward to getting some tips from the forum users.  Thank you in advance.

    Device identification should be automatic, whether Firewire or USB - sadly though sometime it isn't.
    One of my Sony devices (A100 DSLR) requires that the camera be switched before inserting the(for the A100) a USB cable or it is not recognised in the Organiser. It you have only been switching the camera on after connecting the cable you might try turning it on before.
    From the specification your camera has both USB and Firewire connections. Have you tried the USB?
    If the above doesn't work for you then you should probably install the Sony Picture Motion Browser (PMB) software. It may install a driver for your camera.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • I have a MacBook Pro (Retina) and a Sony HandyCam DCR-HC48 video Camera. The Sony only exports video via Firewire, which is not available on the Mac. Is there a firewire to USB or to HDMI adapter?

    I have a MacBook Pro (Retina) and a Sony HandyCam DCR-HC48 video Camera. The Sony only exports video via Firewire, which is not available on the Mac. Is there a firewire to USB or to HDMI adapter?

    tyler57,
    it would be better to direct that question to Gary Loftis, since my MacBook Pro doesn’t have a Thunderbolt port.

  • Urgent! please help - Sony DCR PC106E

    Hi
    I have a Macbook pro and I have read that in order to transfer videos from my Sony DCR PC106E camcorder to Imovie I needed a firewire and I bought that today but it's still not reconising my camcorder. Do I need to download some software that I'm  not aware of in order for this to work?
    Please help I'm working against the clock, I need to transfer 7 tapes before tonight because I need to return it to my friend.
    Thanks.

    Hi
    And Camera menu - must be set to DV-out. (on Camera)
    I have a PC-330E - works greatly
    NO CAMERA or A/D-box
    Cable
    • Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
    FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
    • Test another FW-Cable very often the problem maker.
    Camera
    • Test Your Camera on another Mac so that DV-in still works OK
    • Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
    • Some Cameras has a Menu where You must select DV-out to get it to work
    • Camera connected to "charger" (mains adaptor) - not just on battery
    • Camera set in Playback mode - NOT Recording mode
    Does Your Camera work on another Mac ?
    Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
    This is lethal to the A/D-chip in the Camera = needs an expensive repair.
    (Hard to find out - else than import/export to another Mac ceased to work
    everything else is OK e.g. recording and playback to TV)
    A/D-box
    • Is the dip-switches set right ?
    • Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
    • Try resetting it
    Connections
    • Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
    Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
    the Movie project to dedicated external hard disk.
    • FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
    External device’s (hard disk’s)
    • Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
    • MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
    Mac
    • Free space on internal (start-up) hard disk ? Please specify the amount of free space.
    (Other hard disks don't count)
    I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
    after material is imported and edited.
    • Does Your Mac have a FireWire Port
    • White MacBooks - don't
    • MacBook-Air - don't
    if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
    else - NO SOLUTION
    Only option as I get it is either
    • Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
    • Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
    • If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
    You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
    has one and this FW-Card-port works greatly.
    SoftWare
    • Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
    • Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
    • FileVault is off ? (hopefully)
    • Screen Saver - OFF
    • Energy Saver - OFF
    Using WHAT versions ? .
    • Mac OS - X.5.4 ?
    • QuickTime version ? (This is the heart in both iMovie and FinalCut)
    • iMovie’08 (7.1.?), 09 or 11 ?
    • iMovie HD 6 (6.0.4/3) ?
    Other ways to import Your miniDV tape
    • Use another Camera. There where tape play-back stations from SONY
    but they costed about 2-4 times a normal miniDV Camera.
    • If Your Camera works on another Mac. Make an iMovie movie project here and move it
    over to Your Mac via an external hard disk.
    (HAS TO BE   Mac OS Extended   formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
    (Should be a FireWire one - USB/USB2 performs badly)
    from LKN 1935.
    Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
    from Karsten.
    in addition to Bengt's excellent '9 yards of advice' ..
    camera set to 'Play' , not rec/computer/etc.?
    camera not on battery, but power-line?
    did your Mac 'recognize' this camera before...?
    a technical check.
    connect camera, on, playback, fw-connected...
    click on the Blue Apple, upper left of your screen ..
    choose 'About . . / More . .
    under Firewire.. what do you read . . ?
    More
    • FileVault - Secure that it’s turned off
    • Network storage - DOESN’T WORK
    • Where did You store/capture/import Your project ?
    External USB hard disk = Bad Choice / FireWire = Good
    If so it has to be Mac OS Extended formatted
    ----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
    mbolander
    Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
    I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
    No Camera or bad import
    • USB hard disk
    • Network storage
    • File Vault is on
    jiggaman15dg wrote
    if you have adobe cs3 or 4 and have the adobe bridge on close that
    or no firewire will work
    see if that helps
    DJ1249 wrote
    The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
    MaryBoog wrote
    Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
    //support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
    What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
    Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
    Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
    Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
    This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
    Yours Bengt W

  • Help with Sony Digital Camcorder DCR-SR42 Pulling Images FROM Camera to Mac

    I need some help...I purchased a Sony DCR-SR42 camera and used it while on holiday. I can't seem to figure out what software I need to pull the movies from the camera. After MANY calls to Apple Tech support (and being told that I HAD to buy iLife 08, which I don't want to do if i can avoid it), I finally found somebody who said that I could use freeware MPEG Stream Clip to pull the videos from my camera and convert to MPEG4, then I can use iMovie HD 06. All this is with the assumption my computer recognizes my camera as a harddrive (which I'm not sure, and I'm at work without computer OR camera).
    My question is this - does anybody have any experience with THIS camera (Sony DCR-S42) and what to do with iMovie 06?? Any and ALL suggestions would be GREATLY appreciated.
    Thanks!
    -Jill

    Yes, only iMovie 8 will accept a video stream from a hard disk camera.
    All other versions of iMovie will not: they require a DV stream from tape via firewire.
    In other words, your camera is incompatible will all versions of iMovie except version 8.
    To convert to mpeg4, or even DV which is what iMovie is intended for, you need:
    mpegStreamclip:
    http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
    which is free, as well as the the Apple mpeg2 plugin :
    http://www.apple.com/quicktime/mpeg2/
    which is a mere $20.
    Another possibility is to use DVDxDV:
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
    which costs $25.

  • Help sony dcr-sr57 not working with imovie 09

    I have a Handycam sony dcr-sr57e PAL. It is a compatible camera for imovie 09 (http://support.apple.com/kb/HT3290?viewlocale=it_IT#7).
    But imovie don't recognize its files (mpeg 2).
    I can see mpeg2 files with quicktime X (i have mpeg2 component for quicktime).
    Why i don't see mpeg2 files of my camera?
    help
    Imac 21,5'' - snow leopard 10.6.2 - imovie 8.0.5

    Thank you to this thread:
    http://discussions.apple.com/thread.jspa?threadID=2346939&tstart=0

  • Looking for help getting imovie to recognize sony DCR-SR47 camcorder

    Has anyone been able to up load to imovie from sony DCR-SR47 camcorder?

    It depends on which camcorder you have.
    If it records onto miniDV tape (..or "microMV" tape..) then you definitely need to use FireWire; nothing else will do. Buy one at any electronics store; it's called a FireWire or DV or i.Link cable. It must have a teeny 4-pin connector at one end (..to plug into the camera..) and a larger 6-pin connector at the other end (..to plug into your Mac..)
    ..unless you have a new MacBook Pro, which needs a slightly different shaped 9-pin FireWire 800 connector instead of the 6-pin connector.
    You cannot use a USB connection for tape-based camcorders, even if they have a USB socket ..as that's just for transferring stills, not video.
    If your camcorder does NOT shoot onto tape, then you'll need to transfer via USB. That applies for all chip-based and hard-drive based camcorders, and - I think - DVD-based camcorders.
    All current AVCHD camcorders use USB.
    If in doubt (..but there should be no doubt..) read the camcorder's instruction book. If you can't find the instructions, download them from the manufacturer's website ..almost all instructions are available online.
    But if it needs FireWire - if it's a tape-based camcorder - you CANNOT use USB.

  • How to import Sony DCR-SX85 video into iMovie.  Doesn't do it automatically and using Mpeg stream lip didn't help.  I have iMovie HD 6.0.3

    Can't import Sony DCR-SX85 video into iMovie HD 6.0.3.  MPEG stream clip didn't work.  This has been discussed before, but I haven't found a solution yet.

    Can't import Sony DCR-SX85 video into iMovie HD 6.0.3.  MPEG stream clip didn't work.  This has been discussed before, but I haven't found a solution yet.

  • Sony DCR-DVD505 Handycam: Unable to get video clips, audio

    Evaluating Adobe Premier.  Hopefully helpful for other Sony DCR-DVD505 users.
    Objectives:
    1) Get videos from Sony DCR-DVD505 handycam into Premier Elements
    2) Drag and drop various clips into Sceneline
    3) Insert menu markers
    4) Burn DVD
    Stuck in Step 1, getting video from handycam, unable to get video clips (with audio)
    First Try: NO AUDIO.
    The Sony DCR-DVD505 burns a mini-DVD (1.4 GB) while recording.  After "finalizing" the disk, the media may be imported into the computer.  Streaming was supported by Windows XP driver but is no longer supported in Windows Vista.   In fact, Vista Service Pack 2 (SP2) does not even recognize the camera as a DVD drive!  So downgraded to Vista SP1 and used the Sony Picture Motion Browser to import media into computer as MPG files.  Each MPG file is a clip (corresponding exactly to camera record on-off sequence while shooting).  Then opened up Adobe Premier Elements 8.  Used get media to import all the MPG clips into "Organize".  Dragged and dropped various clips...inserted a menu or two and...burned the DVD.  PROBLEM: VIDEO OK, BUT NO AUDIO(?!).  The MPG files on computer play fine (with audio) inside Windows Media Players.  Read all sorts of nonsense about why Adobe Premier (probably old versions) cannot work with "low-quality/compressed" MPG and needs to be a particular type AVI soo....
    Second Try: Capture VOB directly
    Forget the camera.  Insert the mini-DVD directly into computer DVD drive, create a new project and followed directions from  "Lowdown on VOB" http://forums.adobe.com/message/2117743 and "tools to convert to DVI" http://forums.adobe.com/thread/415317.  I loaded the VOB directly and dropped them into  Timeline as advised by the second post (only hitch being the first VOB pertaining to the DVD menu is not recognized and is neither needed).
    However, File > Export is always GREYED out (unusable).  And the status at bottom right seems to be looping on "Background Rendering".  DO I WAIT?  In any case, the whole video is showing up as a single continuous stream and what I want are the clips from the camera?! 
    Then I tried Prism (again as per the second forum post mentioned above).  It simply did something to process 30 minutes of video and crashed in the end without explanation - saying there was an error in conversion.
    Is this AVI conversion even a good idea?  How would I get my clips back??
    Bottomline.  My mini-DVD and imported MPGs plays fine in Windows Media Player.  However unable to extract the camera clips (with audio).

    Dawg, I have the Sony DCR-DVD305, and have been using it successfully for quite a while with PE7, with few issues, once I had a workflow nailed down.
    I believe the 505 is basically the same camera, with some additional features.
    This workflow worked for me in the past so I'll pass that along:
    Sony Browser to PC as Mpeg.
    Mpeg to Windows Movie Maker, output to DV-AVI, taking default settings.
    DV-AVI imported into PE7.
    This should also work for PE8.
    Upon getting Cyberlinks PowerDirector v7, my new workflow changed to this:
    I take the min-DVD directly from camcorder to my PC, and capture the disk via Power Director.
    PD will convert the VOB's directly to DV-AVI Type 2 on one pass.
    I then load this DV-AVI into PE7.
    (PD v7 was pre-installed on my new PC from HP, or it can be purchased from Cyberlink).
    Other options to try:
    Copy the VOB's directly from the mini-DVD to your PC and use Prism to convert these to AVI.
    Or load the VOB or Mpeg into PE, then use that to convert to AVI.
    (Export to DV-AVI with PE8 is done with SHARE/PC, not Export under the File Menu, which is greyed out).
    I've had many issues trying to work with Mpeg's and VOB's when loaded directly to PE with limited success.
    So if you can get it converted successfully to AVI outside of PE, I've found this to be a better approach.
    Post results, if any of this works for you...
    Note: One other thing, if you are working directly with VOB's to PE, especially multiple VOB's from a single DVD, you can encounter out-of-sync issues between video and audio. If this occurs, review this link from Muvipix:
    http://muvipix.com/phpBB3/viewtopic.php?f=38&t=2469:

  • Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the ca

    Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the camera the port out is to use a USB data cable to a laptop for my macbookpro can not read the contents of the file and the camera. I also want to use the lens on the camera as a substitute for the embedded camera on my macbookpro, what should I do to replace the embedded camera on macbookpro with sony camera so that the camera could be more variety and can I record when I turned macbookpro . Please help for this so that I can quickly capture the results from sony camera to my macbookpro. Thank you.

    See this page http://macosx.com/forums/networking-compatibility/296947-sony-camcorder-my-mac.h tml - might be some helpful tips there.
    Clinton

  • I can no longer get my MacBook to recognize the same camera (Sony DCR-SR68) I've been doing this with for the last year.  I just upgraded to OSX 10.8.1 - did I make a mistake to upgrade my software ????!!!!

    I am trying not lose my mind - and I won't even go into the Paralells issues.
    My Grandmother just had a stroke, and I just want to get the video from some of this summer's parties with her.
    Same MacBook,  Same Sony DCR-SR68 Handycam,  Same IMovie
    The only difference is the 'new'  'upgrade'd software.  The time I could be spending with my family, I am just drowning in all my computer issues
    that I never had before this upgrade.
    Help !

    After plugging in your camcorder, I would run Software update just one more time.
    I would also try to see if the app "Image Capture" doesn't see your camcorder. This is found in your applications folder but you can get to it easily by hitting command and space bar to bring up spotlight and then typing "Image Capture".
    the current version of iMovie is 9.0.7
    you could try creating a new user and seeing if the camera doesn't connect from there.
    if it doesn't then you might need to find a friend with a compatible OS until Sony decides to update it's support for OSX.
    I looked on their site but it doesn't seem like they've ever supported it with your model.
    you might also want to send feedback to apple as to your experience, although their support is limited to their own hardware, so calling Sony might be a better idea...
    http://www.apple.com/feedback/macosx.html

  • Capturing from Sony DCR in Premiere Elements 13 not possible?

    Premiere Elements does not find the device (SONY DCR-TRV120E PAL), although it is recognized in "Devices and Printers" as "AV/C Subunit / Sony DV Camcorder" (WIN 7) and the device is also recognized and capturing correctly under MS Movie Maker.        
    Thanks for any helpful advice!
    Oliver.

    Oliver
    Thanks for the reply.
    Hope you can use the workarounds suggested in the Adobe document.
    Are you within 30 days of purchase from Adobe direct on this one? If so, you can seek a refund/money back from Adobe.
    If you purchased from an authorized reseller, then you have to deal with the seller according to the sellers return/refund policy.
    If an Adobe online purchase, then Adobe Chat Orders should be able to take care of the refund details.
    Contact Customer Care
    Premiere Elements
    Membership, Account, Payment
    Payments, Invoices, Orders
    If the link does not hold its set, then you will need to navigate to the Chat Panel using the above titles as guides.
    Best wishes
    ATR

  • IMovie HD 6 Stopped Controlling Sony DCR-PC350

    I just upgraded from iMovie HD to iMovie HD 6 and began attempting to import a widescreen format movie from my Sony DCR-PC350 into iMovie HD 6. I've been using this HandyCam successfully through iMovie 5 and iMovie HD... both controlled the camera flawlessly. Now, however, I turned the camera on to the playback setting and used the new iMovie HD 6 to begin rewinding the camera. It rewound perfectly. Then, I tried to import the video off it. iMovie shows a grey clip with the time ticking by but the camera is not playing! So, I stopped the import and noticed that none of the camera controls in iMovie are active... they are all greyed out. Since then I've tried restarting, throwing out iMovie prefs, unplugging everything and plugging it all back in, rewinding and playing the movie on the camera using the camera controls to make sure it wasn't the tape, and nothing seems to be able to make iMovie HD 6 recognize my camera anymore. It's been 3 hours of testing to no avail. Nothing seems to make the camera control buttons to become active again. Can anyone please help? Thanks in advance...
    QuickSilver G4 933   Mac OS X (10.4.4)  

    Thank you for your link. While I had my doubts about the resetting of my Camcorder to be the fix, it worked! WHY it needed resetting right in the middle of functioning untouched in it's cradle -- I have no idea.

Maybe you are looking for