Noob Help with inserting frame- is there a better way

Hi,
I am trying to create a frame in dreamweaver mx, but rather
than have a whole frameset, i just want 1 frame. (i dont know if i
am going about it the wring way).
The page is at this link
http://www.cryptomnesian.com/CryptomWebPage.html
I want the large box with the KPA to become the main content
box (this would eb the framed box), so that the mp3 player in the
top would not reload when a link was clicked. The links would
hopefully load up a new box.
Are frames the best way to so for this?? I am a noobie as far
as frames and css goes. Any suggestions or solutions much
appreciated.
Thanks,
perino

Look into using a Card Layout rather than manually swapping the panels: http://java.sun.com/docs/books/tutorial/uiswing/layout/card.html

Similar Messages

Switching a panel to another panel in the same frame.Is there a better way?

    public void actionPerformed(ActionEvent e) {
        if (e.getSource() instanceof toolButton){
            westPanel.remove(optionPanel);
            westPanel.setVisible(false);
            toolButton tb = (toolButton)e.getSource();
            optionPanel = tb.getPanel();
            westPanel.add(optionPanel);
            westPanel.setVisible(true);
    }This code above is what I used to execute when one of several JButtons is being pressed.
In this program, one of the JPanel will be automatically switched to another JPanel when you press the respective JButtons.
Here are my questions:
1. Right now, I use westPanel.setVisible(false) and then change some stuff and then invoke westPanel.setVisible(true) to make it visible again. Although this works, I have a feeling that this is not quite right. I feel that there should be some better way to do this, switching the panel and request the program to redraw the replacing JPanel. Is there a better way for this?
2. Most of the time, the JPanel changes the size according to the components on it. I have tried several LayoutManager, but it seems that those components have more priority. Is there a way to completely fix the JPanel so that they stay the same size?

Look into using a Card Layout rather than manually swapping the panels: http://java.sun.com/docs/books/tutorial/uiswing/layout/card.html

Need help with inserting frame with scrolling images

Hi,
Im a beginner and need help putting a single box/frame with scrolling images in the middle of my layout, so that when viewed in browser, the header and footer remain in place, while the images and info in the frame in the centre of the page can be scrolled down/up?

You can use an iframe element <iframe src="" width="" height="" scrolling="yes"> though if you're concerned with crawlers you should avoid frames as much as possible.

Hi My Iphone 4 keeps on turning off with no reason and there is no way of turning it on. any advice of how to get it working?

Hi My Iphone 4 keeps on turning off with no reason and there is no way of turning it on. any advice of how to get it working?

I guess but that was what I was on earlier but it wasn't of much help.
I need to chat with an apple person but don't know how if I don't have a phone accessible.
Is there a way to connect thru a laptop or something?

HT4759 lost my iphone s4 before I had a chance to hook up with Icloud. Is there still a way to track it?

My Iphone was stolden? Never had a chance to connect with ICloud. Is there stil a way to track my phone?

No. At least not on the web that is.
Allan

If your iphone 3gs just shuts down when theres something wrong with your hardware,is there any possible way to get all your pictures back?

if your iphone 3gs just shuts down when something went wrong with your hardware is there any possible way to get all pictures or other important stuff onto itunes?

What happened to the phone. Did it just go black? Did you try to plug it into Itunes and see if it can be seen or throw it on the charger. You can still try the reset procedure listed in http://support.apple.com/kb/ht1430 and see if the phone turns back on.
The only way to get things back is to have backed them up ahead of time.

Is there a better way to do this with Flash?

I am new to Flash but am slowly teaching myself via Lynda.com etc
I have an image that I have added to a website via a content management system and want to make certain areas of that image into links to other sites.
I found this page that does the kind of thing I want to do, but it appears from looking at the source code that the person who has done this has cut the image up into several sections in order to fit it into a table: http://www3.imperial.ac.uk/staffdevelopment/postdocs1/guidance
Is there a better way to achieve the same kind of effect using Flash by making ares of an image into links and keeping the image as a whole?

There are ways to keep the image whole and have portions of it linking to different places both in HTML and in Flash. In HTML you can use an image map. In Flash, you can just lay invisible buttons atop the image and use those to link.

When I share a file to YouTube, where does the output file live? I want also to make a DVD. And is this a best practice or is there a better way?

I want also to make a DVD, but can't see where the .mov files are.
And is this a best practice or is there a better way to do this, such as with a master file?
thanks,
/john

I would export to a file saved on your drive as h.264, same frame size. Then import that into youtube.
I have never used FCP X to make a DVD but I assume that it will build the needed vob mpeg 2 source material for the disk.
I used to use Toast & IDVD. Toast is great.
To "see" the files created by FCP 10.1.1 for YouTube, rt. (control) click on the Library Icon in your Movies/show package contents/"project"/share.

Is there any better way to test an agent?

Every time when I changes some code in the agent, I have to restart the domain to load the new class file. I tried the reload the agent from the Oracle Enterprise Manager, but it is not working. The old agent is still going on. It gives me many troubles since I can't start the SMB server from Window 2000 terminal console. I have to go to the computer room to start SMB natively. Is there any better way to test an agent or start the SMB server in the Window 2000 terminal console?
Your help will be greatly appreciated!

Jailcorder requires a jail broken iDevice to work. While it is not illegal to jail brake your iPhone in the US it is illegal to jail break an iPad.
If you do that you will not be able to use these board for help as the discussion of anything relating to a jail broken iDevice is against the TOU and the hosts will remove your posts
In addition looking tha Jailcorder it seems it has not kept up with Apple. It doesn;t work Xcode 5 and IOS 7.
On final thing to keep in mind a jail broken device behaves differently then one that is non jail broken. So even of you test with Jailcode you will still need to go through testing with a non jail broken device before submitting.
All in all if you are serious about developing for IOS it would seem the better course is to get the Developer account now.
regards

Have you got a better idea? Is there a better way? ( arrays )

Hello!
First post here and ofcourse it is a question I hopo you people don't mind. I will get right to the point:
I have a picture , or to be precise the pixels of a picture stored as a 3 dimensional array in the form of
img[y][x][color].
Since I am working on grayscale the color doesn't matter , so de facto I have a 2dim array of X-Y coordinates. For my programm ( a line tracker of sorts) I need to be able to select a subgroup of this array. This subgroup should be equivalent to a small (appr. 10x20 pixels wide) box in the original picture. My problem is that this box could be at any angle, that is it's side do not have to run parallel to the x-y-Axis.
Now how would be the best way of doing this?
My idea is to calculate the lines of the rectangle geometricaly and then try to approximate them onto the array. After that I can use them as boundaries to select every pixel that is inside the box.
Is there a better way? Does somebody have any experience with something similar?
Any help would be greatly appreciated...
Alexis

Two things to try. Try rebuilding the mailbox. This can take awhile if you have a lot of mail.
Rebuild mailbox
Try reindexing the mailbox. This can take awhile if you have a lot of mail.
Reindex messages

Is There a Better Way to Work in the Marker List Window?

Is there a better way to sequentially listen to phrases one-by-one in the Marker List window? What I'm doing is Auto-Marking one single long file to break out 271 bits and save each as their own file. It's WAY faster than copying and pasting bits into new files and "saving as" 217 times.
BUT, after Auto-Marking, I have 300-400 phrases to listen to, deleting the non-keepers as I go, until I'm left with my "keeper" 271 marked phrases. But it's so tedious to move from phrase-to-phase. I have to double-click each one before I can hear it (you can move the cursor with the down-arrow, but it won't actually select the audio). So I have to use the mouse (unless I'm missing something) and double-click each of the hundreds of phrases. Then whenever I delete one (which I'll have to do about a hundred times or more to get rid of bad takes, alternates, etc.), inexplicably the cursor jumps way up the list so you have to scroll back down dozens of files to get to where you were. It took me 35 minutes to do it this last time.
Contrast that with Reaper's audition/preview functionality (which, ironically, AA has also, but only for files already saved into a folder). Once I had all the files saved into a folder, I QC'd all 217 files in Reaper and MAN what a difference! All I had to do was use the "down" arrow to advance to the next file AND have it play automatically (Audition can do the same thing with the "Open File" feature). It literally took me 5 minutes to check all 217 files that way. If AA could add that kind of functionality to the Marker List window, or if I'm just completely missing something (very possible) I would REALLY be happy.
Any ideas?
Thanks again! Happy New Years again!
Ken

Wild Duck,
That doesn't quite do what I need. My end-product is 271 (used to be 116) separate files created from one large file. That large one is made up of WAY more than 271 (the VO actor records different versions of some commands, makes mistakes, etc.).
So I need the ability to listen to each marker, and then be able to delete it if need be.
The Playlist makes this impossible in two ways. It only has 2 options for hearing each marker, and neither option allows me to delete that marker after I've heard it. It either plays them all back-to-back without stopping, or it plays each as you click the "Move Down" button. That last one would be great if showed me which marker was playing! But it doesn't, so there is no way for me to know which marker number I just heard, nor can I delete that marker after I hear it.
Sigh.
Thanks for the tip though:).
Ken

I am having trouble transferring files from an old MacBook (2007) to a MacBook Air over a wireless network. The connection was interrupted and the time was over 24 hours. Is there a better way to do this? I'm using Migration assistant.

I am having trouble transferring files from an old MacBook (2007) to a MacBook Air over a wireless network. The connection was interrupted and the time was over 24 hours. Is there a better way to do this? I'm using Migration assistant. The lack of an ethernet port on MacBook air does not help.

William ..
Alternative data transfer methods suggested here > OS X: How to migrate data from another Mac using Mavericks

Is there a better way to do this projection/aggregate query?

Hi,
Summary:
Can anyone offer advice on how best to use JDO to perform
projection/aggregate queries? Is there a better way of doing what is
described below?
Details:
The web application I'm developing includes a GUI for ad-hoc reports on
JDO's. Unlike 3rd party tools that go straight to the database we can
implement business rules that restrict access to objects (by adding extra
predicates) and provide extra calculated fields (by adding extra get methods
to our JDO's - no expression language yet). We're pleased with the results
so far.
Now I want to make it produce reports with aggregates and projections
without instantiating JDO instances. Here is an example of the sort of thing
I want it to be capable of doing:
Each asset has one associated t.description and zero or one associated
d.description.
For every distinct combination of t.description and d.description (skip
those for which there are no assets)
calculate some aggregates over all the assets with these values.
and here it is in SQL:
select t.description type, d.description description, count(*) count,
sum(a.purch_price) sumPurchPrice
from assets a
left outer join asset_descriptions d
on a.adesc_no = d.adesc_no,
asset_types t
where a.atype_no = t.atype_no
group by t.description, d.description
order by t.description, d.description
it takes <100ms to produce 5300 rows from 83000 assets.
The nearest I have managed with JDO is (pseodo code):
perform projection query to get t.description, d.description for every asset
loop on results
if this is first time we've had this combination of t.description,
d.description
perform aggregate query to get aggregates for this combination
The java code is below. It takes about 16000ms (with debug/trace logging
off, c.f. 100ms for SQL).
If the inner query is commented out it takes about 1600ms (so the inner
query is responsible for 9/10ths of the elapsed time).
Timings exclude startup overheads like PersistenceManagerFactory creation
and checking the meta data against the database (by looping 5 times and
averaging only the last 4) but include PersistenceManager creation (which
happens inside the loop).
It would be too big a job for us to directly generate SQL from our generic
ad-hoc report GUI, so that is not really an option.
KodoQuery q1 = (KodoQuery) pm.newQuery(Asset.class);
q1.setResult(
"assetType.description, assetDescription.description");
q1.setOrdering(
"assetType.description ascending,
assetDescription.description ascending");
KodoQuery q2 = (KodoQuery) pm.newQuery(Asset.class);
q2.setResult("count(purchPrice), sum(purchPrice)");
q2.declareParameters(
"String myAssetType, String myAssetDescription");
q2.setFilter(
"assetType.description == myAssetType &&
assetDescription.description == myAssetDescription");
q2.compile();
Collection results = (Collection) q1.execute();
Set distinct = new HashSet();
for (Iterator i = results.iterator(); i.hasNext();) {
Object[] cols = (Object[]) i.next();
String assetType = (String) cols[0];
String assetDescription = (String) cols[1];
String type_description =
assetDescription != null
? assetType + "~" + assetDescription
: assetType;
if (distinct.add(type_description)) {
Object[] cols2 =
(Object[]) q2.execute(assetType,
assetDescription);
// System.out.println(
// "type "
// + assetType
// + ", description "
// + assetDescription
// + ", count "
// + cols2[0]
// + ", sum "
// + cols2[1]);
q2.closeAll();
q1.closeAll();

Neil,
It sounds like the problem that you're running into is that Kodo doesn't
yet support the JDO2 grouping constructs, so you're doing your own
grouping in the Java code. Is that accurate?
We do plan on adding direct grouping support to our aggregate/projection
capabilities in the near future, but as you've noticed, those
capabilities are not there yet.
-Patrick
Neil Bacon wrote:
Hi,
Summary:
Can anyone offer advice on how best to use JDO to perform
projection/aggregate queries? Is there a better way of doing what is
described below?
Details:
The web application I'm developing includes a GUI for ad-hoc reports on
JDO's. Unlike 3rd party tools that go straight to the database we can
implement business rules that restrict access to objects (by adding extra
predicates) and provide extra calculated fields (by adding extra get methods
to our JDO's - no expression language yet). We're pleased with the results
so far.
Now I want to make it produce reports with aggregates and projections
without instantiating JDO instances. Here is an example of the sort of thing
I want it to be capable of doing:
Each asset has one associated t.description and zero or one associated
d.description.
For every distinct combination of t.description and d.description (skip
those for which there are no assets)
calculate some aggregates over all the assets with these values.
and here it is in SQL:
select t.description type, d.description description, count(*) count,
sum(a.purch_price) sumPurchPrice
from assets a
left outer join asset_descriptions d
on a.adesc_no = d.adesc_no,
asset_types t
where a.atype_no = t.atype_no
group by t.description, d.description
order by t.description, d.description
it takes <100ms to produce 5300 rows from 83000 assets.
The nearest I have managed with JDO is (pseodo code):
perform projection query to get t.description, d.description for every asset
loop on results
if this is first time we've had this combination of t.description,
d.description
perform aggregate query to get aggregates for this combination
The java code is below. It takes about 16000ms (with debug/trace logging
off, c.f. 100ms for SQL).
If the inner query is commented out it takes about 1600ms (so the inner
query is responsible for 9/10ths of the elapsed time).
Timings exclude startup overheads like PersistenceManagerFactory creation
and checking the meta data against the database (by looping 5 times and
averaging only the last 4) but include PersistenceManager creation (which
happens inside the loop).
It would be too big a job for us to directly generate SQL from our generic
ad-hoc report GUI, so that is not really an option.
KodoQuery q1 = (KodoQuery) pm.newQuery(Asset.class);
q1.setResult(
"assetType.description, assetDescription.description");
q1.setOrdering(
"assetType.description ascending,
assetDescription.description ascending");
KodoQuery q2 = (KodoQuery) pm.newQuery(Asset.class);
q2.setResult("count(purchPrice), sum(purchPrice)");
q2.declareParameters(
"String myAssetType, String myAssetDescription");
q2.setFilter(
"assetType.description == myAssetType &&
assetDescription.description == myAssetDescription");
q2.compile();
Collection results = (Collection) q1.execute();
Set distinct = new HashSet();
for (Iterator i = results.iterator(); i.hasNext();) {
Object[] cols = (Object[]) i.next();
String assetType = (String) cols[0];
String assetDescription = (String) cols[1];
String type_description =
assetDescription != null
? assetType + "~" + assetDescription
: assetType;
if (distinct.add(type_description)) {
Object[] cols2 =
(Object[]) q2.execute(assetType,
assetDescription);
// System.out.println(
// "type "
// + assetType
// + ", description "
// + assetDescription
// + ", count "
// + cols2[0]
// + ", sum "
// + cols2[1]);
q2.closeAll();
q1.closeAll();

Hi, I had to re install my itunes library from a hard drive to my new laptop. Now I cant sync my iphone because itunes thinks all songs are new and basically doubling all albums. Should i restore iphone or is there a better way?

hi, i had to re install my itunes library from a hard drive to my new laptop. Now itunes thinks i am trying to add new albums and saying there isnt enoug space. should i restore or is there a better way.

Have you tried exporting a 10 second section of the footage to see if the issue shows up once the seqeunce is actually exported from the timeline. I edit on CS5 with windows 7 pro at work quite often and have no issues so I assure you that isn't the issue. I also edit with AVCHD footage when at home and work quite freqeuntly as well so I'm positive that isn't the issue. It sounds like a GPU driver has been corrupted in the way it interacts with premiere pro. What type of GPU do you have? If it supports MPE's GPU acceleration have you tried turning it off and seeing if that makes any difference?
Anyways though try to export a 10 second test section of your timeline to see if when the clip is exported from premiere it will play normally in windows media player or vlc or w/e media player you want to use. If it exports fine then you can almost be positive it's a corrupted video card driver. If that's the case I'd re-install your GPU's driver and also check your gpu makers website to see if they have a updated driver avaiable.

After saving a pdf as Excel workbook the numbers remain text and cannot be used in calculations. Is there a better way to convert into real digital numbers?

After saving a pdf as Excel workbook the numbers remain text and cannot be used in calculations. Is there a better way to convert into real digital numbers?
I have tried to convert the pdf to Word instead but same difficulty with numbers: look like numbers but not usable for calculations

Excel has a 'text to numbers' function, I would use that.
Convert text to numbers. Microsoft Excel.

Noob Help with inserting frame- is there a better way

Similar Messages

Maybe you are looking for