Noob needs help with drivers...

yeech, so yeah i decided to format my c drive, and surprise surprise, i wasnt quite prepared....
here's the deal, my wireless card works, as i got the drivers for it, but my onboard LAN doesnt, and i have no idea where to get the driver for that...any help is appreciated..
thanks!

Quote from: bejon2000 on 20-March-06, 16:53:45
budfroggy,
The Nvidia LAN is included with the NF3 motherboard driver:
I would rec 5.10, since there are some having LAN problems with the later 5.11.
http://www.nvidia.com/object/nforce_udp_winxp_archive.html
Here´s the Realtek GigaLAN driver (could be a bit difficult to find on the Download page, because it´s placed under "Archived"
http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=607&kind=1
Follow what bejon say and used driver 5.10.

Similar Messages

Noob needs help with Logic and Motu live setup.

Hello everyone,
I'm a noob / semi noob who could use some help with a live setup using 2 MOTU 896HD's and Logic on a Mac.
Here's the scenario:
I teach an outdoor marching percussion section (a drumline and a front ensemble of marimbas and vibes). We have an amazing setup of live sound to amplify and enhance the mallet percussion. There is a yamaha PA system with 2 subs and 2 mains which are routed through a rack unit that processes the overall PA balance. I'm pretty sure that the unit is supposed to avoid feedback and do an overall cross-over EQ of the sound. Other then that unit, we have 2 motu896hd units which are routed via fire-wire. I also have a coax cable routing the output of the secondary box to the input of the primary box (digital i/o which converts to ADAT in (i think?)..?
Here's the confusion:
There are more then 8 inputs being used from the ensemble itself, so I need the 16 available inputs to be available in Logic. I was lead to believe that the 2nd motu unit would have to be sent digitally to the 1st motu unit via coax digital i/o. Once in Logic, however, I cannot find the signal or any input at all past the 8th input (of the 1st unit).
Here's the goal:
All of my performers and inputs routed via firewire into a Mac Mini running OSX and Logic pro.
I want to be able to use MainStage and run different patches of effects / virt. instruments for a midi controller keyboard / etc.
I want to be able to EQ and balance the ensemble via Logic.
Here's another question:
How much latency will I be dealing with? Would a mac mini with 4gb of ram be able to handle this load? With percussion, I obviously want the sound as latency free as possible. I also, however, want the flexibility of sound enhancement / modification that comes with Logic and the motu896hd units.
Any help would be REALLY appreciated. I need the routing assistance along with some direction as to whether or not this will work for this type of application. I'm pretty certain it does, as I have spoken with some other teachers in similar venues and they have been doing similar things using mac mini's / logic / mainstage / etc.
Thanks in advance,
Chris

You'll definitely want to read the manual to make sure the 896HDs are connected together properly. ADAT is a little tricky, it's not just a matter of cabling them together. Go to motunation.com if you need more guidance on connecting multiple devices. Beyond that initial hookup, here are a couple of quick suggestions:
1. Open CueMix and see if both devices are reported there. If not, your connections aren't correct. Be sure to select 44.1kHz as your sample rate, otherwise you are reducing the number of additional channels. For instance at 88.2kHz you would get half the additional channels via ADAT.
2. You may need to create an aggregate device for the MacBook to recognize more than the first 896HD. Lots of help on this forum for how to do that. Again, first make sure you have the 896HDs connected together properly.
3. As for latency with Mainstage on the Mini, no way to know until you try it. Generally MOTU is fantastic for low latency work but Mainstage is a question mark for a lot of users right now. If the Mini can't cut the mustard, you have a great excuse to upgrade to a MacBook Pro.

T400 + WIndows 7, need help with drivers

Hello.
I have just installed a copy of W7 Pro on my T400 but i got some devices in the device manager which i do not know what is.
I Have installed "everything" from http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-72858
but I could not install the following:
-Local Manageability Service and Serial Over LAN (Intel AMT 4.0) Windows Vista, XP
-Management Engine Interface (Intel AMT 2.6) Windows Vista, XP
The first i managed to install by going to the intel site and download the newest version but the second one wont install nor will the version on the intel download site.
So far i have the following devices missing drivers:
3xBase System Device
PCI Serial Port
PCI Simple Communications Controller
Hope you guys can help me.

Hi Wouz,
I am sorry that the windows 7 drivers are not fully released yet but we have some beta version of drivers. Please check if you can find what you need here. However, it does not cover all of Lenovo products as yet. Lenovo has a large amount of product models to support. Please bear with us and we shall release the drivers soon after the Windows 7 launch in 22nd Oct 2009.
Thank you very much for your patience.
Best regards,
Cleo
WW Social Media
T61, T410, x240, Z500, Flex 14
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Noob needs help with Media Encoder Settings

Hi All,
Please be gentle with me. I am very new to this.
I am using PPCS4 full version on which I am trying to edit and export video from my Canon HF 10 using their AVCHD format.
The Mac is a MAC PRO 2 x QuadCore 3.0Ghz, 1 x 320GB SATA and 3 x 1TB SATA disks with a 30" Apple Cinema Display.
I can import and see the video running in the source window, it can be a bit choppy but i am putting dowm to the lack of RAM (more the way). My real problem is that when I export the files the result is, well bad. I either get what appears to be a line effect every other line on the screen or by using other settings it appears grainy.
My Cam should be recording in 1080i HD and i expect to be able to put this stuff on a DVD / Blue-Ray disk or file and see as good an image as I see in the viewfinder. This I cannot seem to do.
Any ideas?
Thanks
J

Hi
I don't understand...please let me know...
did media encoder work before and it just suddenly stopped working ? Or is this the first time you tried using it and it just doesnt work from your original installation ? In other words , did it EVER work for you using the HD ?
What source material are you using ? In other words, what type of video. MOV and AVI can have many different types of video inside those file extensions...they are called "wrappers" insomuch as they can have a lot of different "codecs" being used in the video. Can you tell us what the video is that you're using when AME fails to work ?
Also tell more about your computer setup...how many hard drives? Did you set up your system like recommended in many threads here in the forums ?
There are a lot of really good and smart people here who can help you, but they need as much information as possible so they can begin to understand what is going on with your problem. It does take some time and work on your part to put all that info into a message, but it's worth it because most times problems are solved because of it.
ps...not meant to be a criticism because you were angry about problem, but some people probably didnt respond to your trouble right away because of your initial mssg being a little bit scary.. most people here are just users like you and help each other. nobody wants to risk being yelled at or deal with someone who is just angry and isn't really supplying enough information to help solve the problem. That's just my opinion, and I'm glad your response to my mssg was less angry sounding. Whew !

Noob needs help with this code...

Hi,
I found this code in a nice tutorial and I wanna make slight
adjustments to the code.
Unfortunately my Action Script skills are very limited... ;)
This is the code for a 'sliding menue', depending on which
button u pressed it will 'slide' to the appropriate picture.
Here's the code:
var currentPosition:Number = large_pics.pic1._x;
var startFlag:Boolean = false;
menuSlide = function (input:MovieClip) {
if (startFlag == false) {
startFlag = true;
var finalDestination:Number = input._x;
var distanceMoved:Number = 0;
var distanceToMove:Number =
Math.abs(finalDestination-currentPosition);
var finalSpeed:Number = .2;
var currentSpeed:Number = 0;
var dir:Number = 1;
if (currentPosition<=finalDestination) {
dir = -1;
} else if (currentPosition>finalDestination) {
dir = 1;
this.onEnterFrame = function() {
currentSpeed =
Math.round((distanceToMove-distanceMoved+1)*finalSpeed);
distanceMoved += currentSpeed;
large_pics._x += dir*currentSpeed;
if (Math.abs(distanceMoved-distanceToMove)<=1) {
large_pics._x =
mask_pics._x-currentPosition+dir*distanceToMove;
currentPosition = input._x;
startFlag = false;
delete this.onEnterFrame;
b1.onRelease = function() {
menuSlide(large_pics.pic1);
b2.onRelease = function() {
menuSlide(large_pics.pic2);
b3.onRelease = function() {
menuSlide(large_pics.pic3);
b4.onRelease = function() {
menuSlide(large_pics.pic4);
I need to adjust five things in this code...
(1) I want this menue to slide vertically not horizontally.
I changed the 'x' values in the code to 'y' which I thought
would make it move vertically, but it doesn't work...
(2) Is it possible that, whatever the distance is, the
"sliding" time is always 2.2 sec ?
(3) I need to implement code that after the final position is
reached, the timeline jumps to a certain movieclip to a certain
label - depending on what button was pressed of course...
I tried to implement this code for button number two...
b2.onRelease = function() {
menuSlide(large_pics.pic2);
if (currentPosition = finalDestination) {
this.large_pics.pic2.gotoAndPlay("s1");
--> sliding still works but it doesn't jump to the
appropriate label...
(4) I wanna add 'Next' & 'Previous' buttons to the slide
show - what would be the code in this case scenario ?
My first thought was something like that Flash checks which
'pic' movieclip it is showing right now (pic1, pic2, pic3 etc.) and
depending on what button u pressed u go to the y value of movieclip
'picX + 1' (Next button) or 'picX - 1' (Previous button)...
Is that possible ?
(5) After implementing the Next & Previous buttons I need
to make sure that when it reached the last pic movieclip it will
not go further on the y value - because there is no more pic
movieclip.
Options are to either slide back to movieclip 'pic1' or
simply do nothing any more on the next button...
I know this is probably Kindergarten for you, but I have only
slight ideas how to do this and no code knowledge to back it up...
haha
Thanx a lot for your help in advance !
Always a pleasure to learn from u guys... ;)
Mike

Hi,
I made some progress with the code thanx to the help of
Simon, but there are still 2 things that need to be addressed...
(1) I want the sliding time always to be 2.2 sec...
here's my approach to it - just a theory but it might work:
we need a speed that changes dynamically depending on the
distance we have to travel...
I don't know if that applies for Action Scrip but I recall
from 6th grade, that...
speed = distance / time
--> we got the time (which is always 2.2 sec)
--> we got the disctance
(currentposition-finaldestination)
--> this should automatically change the speed to the
appropriate value
Unfortunately I have no clue how the action script would look
like (like I said my action script skills are very limited)...
(2) Also, one other thing I need that is not implemented yet,
is that when the final destination is reached it jumps to a certain
label inside a certain movieclip - every time different for each
button pressed - something like:
if (currentPosition = finalDestination) {
this.large_pics.pic2.gotoAndPlay("s1");
that statement just doesn't work when I put it right under
the function for each button...
Thanx again for taking the time !!!
Mike

Noob needs help with hosting multiple sites

Hello I am new to this multi hosting. I have looked on the forum for answers but haven't found any. I am trying to figure out how to host multiple sites. I have my dns working for my default site "example1.com", but need to know if I need to add another dns record for my second site. "example2.com". Also when I point to the new fold that has the second site in it and I assign it port 82 for testing purposes I get an error message saying 403 access forbidden. I need to find out how get permission to view the site for the public. Its in a separate folder on an external hard drive right now for testing purposes. Can any body help me or point me in the right direction? Thanks so much!!!
-Kcam1999

{quote}
While what you are telling him is technically functional, it is not correct
I beg to differ, Paul. You are the one that is not correct.
CNAMES have been deprecated as of some years ago
What? huh? really?
Please show me any official document that states this (and not someone who just started a rumor because he didn't understand them). Indeed, the DNS RFC makes no such claim.
{quote}
I stand very much corrected. CNAMEs are not officially deprecated. Interestingly, your post cites precisely what happens when CNAMES used carelessly. How many transactions are needed to resolve Apple's CNAME chain below? RFC1912 (http://www.faqs.org/rfcs/rfc1912.html) has some recommendations that suggests Apple's own network folks have, like me and perhaps even others here, some learning to do. Is that a 'best practice?'
{quote}> Then make sure you tell Apple since this site depends on the use of CNAMEs:
dig discussions.apple.com
discussions.apple.com. 492 IN CNAME discussions.apple.com.edgesuite.net.
discussions.apple.com.edgesuite.net. 4427 IN CNAME a1399.b.akamai.net.
a1399.b.akamai.net. 2 IN A 128.241.220.82
a1399.b.akamai.net. 2 IN A 128.241.220.72
In fact, it uses TWO CNAMES in a chain. Oh my.{quote}
From RFC1912 (which I'm sure many have now read here), section 2.4 is as follows:
{quote}... having chained records such as CNAMEs pointing to CNAMEs may
make administration issues easier, but is known to tickle bugs in
some resolvers that fail to check loops correctly. As a result some
hosts may not be able to resolve such names.{quote}
{quote}> It is not valid to say "don't use these because they could cause problems'. A records can be just as problematic, as can PTRs. Let's not even talk about MX.{quote}
How, exactly, does is an A record problematic? No chains, no additional lookups, no wasted cycles...
We differ here -- and if we are dealing with a newbie, we don't need to enter into unnecessary complexity UNTIL it is a requirement for their solutions.
{quote}> There are many valid reasons to use CNAMEs in DNS, not least of which is the ease of moving a service if it uses CNAMEs. For example, if you have 10 A records all pointing at the same server and you want to migrate to a different machine you have to locate and update all 10 records. If they used a CNAME to the physical server you could move them all at once using a single change. This is especially important in cross-domain links where you may not control all the origin zone files.
{quote}
You're somewhat reaching here, and it is well beyond the scope of the OP's post or needs (well, until they tell us more about their needs, I suppose). There is nothing difficult about 'finding' and updating the necessary records. The final example you gave is a good one and I'll say THAT is an appropriate use of a CNAME, 'though there are other workarounds for it.
Thanks for keeping me honest.

Need Help With Drivers for 488ca

Hi I'm having nothing buy trouble I have a designjet 488ca and for the life of me can't down lode the soft ware they no longer make the CD and this thing is just keep going around with the same old crap I would be glad to pay for the CD if they just made It Thanks fore any help Oven

Hi,
if you follow this [LINK|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU] you will reach the Drivers Download site. But I must warn you, , momentarly there except for Wireless and the Display no other drivers available. Either they will upload the other one or you will have to search for the remaining drivers in the internet (like LAN, flashmedia, etc..)
But I think they should update the section soon and make the drivers available for us..
Greets

Noob needs help with pictures

higuys i dont really know anything about photoshop but what im looking for is a guide to layer 2 pictures over each other..the first picture is of a car and the second is of an alloy wheel,what i want is to be able to move the picture of the alloy onto the picture of the car so i can see what the wheel looks like on the car.any help appreciated

UMM I think he needs to select and cut out just the WHEELS and apply to the
car picture
read the rest of his post
making selections is too much to type
there are many techniques and many tutorials
basically once you got the wheel selected just open car image and drag the
selection over the other picture (or copy/paste)
then use edit>transform to resize or change perspective to fit
if the wheel is the same for front and back
drag wheel layer to the paper icon to dupe it and use move tool to place
over other wheel
save the layered doc as PSD in case you need to edit
and use save as.. or save for web to make a flattened copy

Noob needs help with gradient

I am having troubles duplicating this image. As you can see ( if I link to it correctly) this little green box (there are three across the top "service specials" for example) is lighter in the middle and darker on the top and bottom. I am tryng to make a new one but am struggling as 'gradient' only seems to go from 'dark to light' but not 'dark to light to dark again'
Any help please? And please keep it realy simple or give directions in detail.
my link

When you have the Gradient Tool selected, look at the Options bar at the top of your screen. There's a group of 5 buttons that will produce different types of gradients.
Experiment with those, and experiment with your start and stop points when you click and drag with the gradient tool in your document area.

Noob Needs Help with VS2005 to VS23013 Conversion

I have a website that was built with VS2005 and would like to convert it to VS2013. A friend of mine built this site but I have no experience with any sort of development. The site also uses a sql database. My goal is to just edit the pictures and text using
VS2013 and to not change any layout or dimensions.
Any help is appreciated.
Bill Dunn

Hello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because your issue is about web site, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Noob needs help with dreamweaver- problem encountered

madelinebeth.net
This is the website i am trying to create. It is not
complete, but on Safari it looks fine. When i open it on firefox,
it gets all messed up and i dont know how to change it. It
initially gets messed up on dreamweaver when i add links o
different slices. Any help would be greatly appreciated.

> is a bug in firefox that does not render correctly using
tables
Never heard of that. Are you sure?
>yes you can use photoshop, fireworks, etc. thats what
they are for
Could not disagree more. Image apps are for
creating/manipulating images.
Period. The HTML they spew is second-rate at best.
Walt
"Silkrooster" <[email protected]> wrote in
message
news:g0t18h$erv$[email protected]..
>A few things I see that need to be changed. your first
issue is tables,
>there
> is a bug in firefox that does not render correctly using
tables. I don't
> recall
> the bug and how it works, but the easiest way to
overcome the bug is to
> use css
> instead of tables.
> The other issue is to add a DTD at the top of your code,
this will stop
> the
> browsers especially IE from using the quirks mode.
> Other than that the code is fine. These problems can
easily be fixed in
> Dreamweaver. And yes you can use photoshop, fireworks,
etc. thats what
> they are
> for, as long as you know the bugs they may create. The
biggest being the
> DTD,
> next is the tables issue, which photoshop can use either
tables or css.
> Fireworks currently only supports tables, hopefully that
will get fixed in
> the
> next version.
> To make sure your code is correct from the get go, it is
best to
> use
> dreamweaver as it is aware of the DTD and can use css or
tables.
> I agree about the leopard skin, way too hard on the
eyes.
> Hope this helps
>

Noob needs help with array manipulation

First off, I'd like to say hello to eveybody!
I'm trying to figure out how to search for a value in an array, delete the first occurence of it, and shift the rest of the array down one. Can anyone point me in the right direction of an algorithm, mabey?
Any help is most appreciated!

first of all, let me comment that for this purpouse, you're better using the ArrayList class.
anyway, you would need to make a temporary array inside a method, and traverse the array in question using a loop. most people use a for loop.
Then, put all the values of the old array into the temporary one, except for the one you dont want.
after the loop, set the old array to equal the temporary array.

Need Help With Drivers For VF0250 Webcam Notebook Pro

I have looked everywhere online and can not find the drive files for the VF0250. Can some one help me. I do not have the disc and I have E-mailed Costumers support twice for it. Was wondering if anyone else could be of help. No other drivers work I have tried them.

Hi,
if you follow this [LINK|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU] you will reach the Drivers Download site. But I must warn you, , momentarly there except for Wireless and the Display no other drivers available. Either they will upload the other one or you will have to search for the remaining drivers in the internet (like LAN, flashmedia, etc..)
But I think they should update the section soon and make the drivers available for us..
Greets

Noob Needs Help with File Size

I created a simple form with no graphics, fonts are not embedded, and I selected the file to be filled out, printed, then mailed. The file size is 21MB. The form is to be emailed so it must be much smaller in size. Once received, the user will fill it out electronicly, print the form, then mail it back to me regular postal mail. Why is the file size so large and how can I make it smaller? Thanks in advance.
Kevin

OK. Here's what I did:
1. At the welcome screen I selected "New Form" and then "New Blank Form"
2. For the page size I left it at "Default" which is 8.5 x 11.
3. For Return Method I selected "Fill then Print".
4. At the last screen I just clicked "OK".
5. Then I built the form. I put in (9) Text boxes, (4) Text Fields that look like Sunken Boxes, (5) Numeric Fields that look like Sunken Boxes, and (3) Check Boxes that look like Sunken Boxes.
6. I then saved the file as a Static PDF Form File.
7. The file size is 22.5 MB.
That was my second attempt. The first attempt I had the fonts embedded and I had a Logo on the form. The file size for that one was 27.3 MB.
Thanks for the help.
Kevin

T61 - New hard drive. Need help with drivers

I just installed a new hard drive (upgraded from 80 gb to 320 gb) and I want to redownload all of the thinkpad functions. As of now, when i use the volume button, it does not appear on the screen so I cannot tell how high it is. Also, when i try to scroll using the touchpad (the right side) it does not work. Can somebody list for me all of the drivers and things that I would need to download to get me back on track? Thanks

http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67853
this is the list of all the compatible drivers for your laptop.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Noob needs help with drivers...

Similar Messages

Maybe you are looking for