Noob questions about front row and back up...

Dear all,
Please can you assist with the following for a proud new mac owner?
1) Why do some songs/albums not play in front row but work in itunes?
2) I have an external hard drive, iomega 500gb, which is very noisy. So i keep it switched off from the back. Can time machine still back up or does the external HDD have to be switched on?
Many thanks...

Hi Fireball Dragon
1. I don't have a definite answer for you, but it sounds like a problem with your iTunes Library or the way you Imported your music into it. Go to: *Applications > Utilities > Disk Utility* and run *Disk Utility Repair Permissions.*
Also how are you selecting Music to play in Front Row, Shuffle or by Albums, Artist, Songs?
2. No Time Machine will not backup with the External HD turned off, but it will resume backup as soon as it is switched on mounted. I personally don't run Time Machine backups every hour, I only switch it on for a few backups every day or after adding important files.
Dennis

Similar Messages

Question about front row and screen saver

I just got my Imac 20 inch screen computer. I've done every thing the directions say about starting my screen saver but it just wont start. Also in my itunes music library, that little remote control that lets your music play automatically while showing the album covers for the songs that are playing. Thats called front row. I see in preferences in front row that it says my screen saver is on but still it wont show my screen saver of which I chose from the apple menu. And front row only plays a few of my songs from my itunes library. Most of the songs, when I am trying to let them play automatically from the remote, will not play. When I try to click on a song from the remote that is not playing I get this sighn that says "front row cannot play this song. Return to Menu". All the songs in my Itunes library play fine when playing them directly from the library. It just seems like this "front row" thing is not working properly. Any one got any suggestions?
Thanks

I think I can verify that the screensaver should NOT be activating during a (DVD at least) movie; I've watched several without any screensaver intervention. Apple's been smart enough to disable the screensaver during DVD playback for quite some time - my brother was surprised when his Windows box at work interrupted his DVD with the screensaver.
However, the screensaver (and password) did activate during FR iTunes play today. That was fine until I needed to pause playback and take a phone call. Can't pause without entering password, so I just closed the MBP's lid to put it to sleep. Annoying. Clearly, there are folks who'd prefer the screensaver never start when FR is active. Other security-minded folks might feel differently; fine, give us a preference pane.
As my brother likes to say, whenever faced with the rare Apple problem, "Fix it Steve!" (Neither of us bother with "Fix it Bill," we know that's futile.)
MacBook Pro 15" Mac OS X (10.4.7)
MacBook Pro 15" Mac OS X (10.4.7)

Front Row and iTunes Radio

Hi,
I found no other forum for my question.
Therefore I post my message here:
I have a brand new iMac G5 20" (build in iSight) and I missing the iTunes radio station in Front Row.
Is this not supported yet?
Sorry for my bad english. I'm from germany
Greetings, Bernd

Hello David,
same problem internet radio and itunes.
Sorry, I mean "internet radio" too and not an real radio
Work around
make a new playlist called radio
Drag the radio linke into it then start front row and
you should see the Radio playlist
Thanx, I will try it.
Greetings, Bernd

Different Playlists in Front ROW and iTunes

Hello
I am new in using Front Row and i have some trouble with it.
When i use the MUSIC playlists then they are not the same playlist as they are in the itunes 9.
For example i have a "BEST OF" playlist. In this playlists are only 5 Star rated songs (about 60 songs) and when i open Front Row than i have in this playlist totally different songs aditionally.
By the way, is there any possibility to check how many songs are in the playlists in FRONT ROW, so i can compare to itunes.
thx for help
Markus

No, you are not dumb. It apparently does not show in Front Row.
Ugh.. I am getting so frustrated with this. Surely someone at Apple wants to be able to play their music videos contiguously from within Front Row...???

Quiting front row and continue to play music

It used to be that front row would continue to play music after you quit it from the same playlist but this isn't the case anymore. If you are using FR to listen to music and quit the music stops playing. Anyone know how to have the music continue to play?

Well as much as I like the look of the new Front Row, I don't like the same thing, That it stops playing music upon closing. The older one (Tiger) was so much better Animation and usefulness wise. It also supported Air-Tunes (my best friend). So I thought to myself, "is there any way i can switch back to Front Row from Tiger (A.K.A. Front Row w/ Air Tunes)". I went on a hunt on the internet and I came across this web site
http://www.edalytical.com/articles/2008/01/16/front-row-and-airtunes-back-to-tig er-for-me
When typing the code into the terminal field, you can just copy and past for safety if need be.
Just rememeber to exorcize caution whenever using terminal, for it can really do damage.
And one more thing, I've realized that when going to the video/movies section it likes to freeze (though it always has for me for some reason when I was running Tiger). DVD Function works perfectly.
Hope that helps!

Front Row and Airport

One thing I find frustrating about Front Row is that it only outputs music to my iMac. I like to play my music through an airport express unit to my home stereo. iTunes allows me to switch to a different audio output (stereo), but Front Row will only play to my iMac. Does anyone know if this configuration can be changed and if so, how?

Welcome to the Apple Discussions!
You've discovered one of the very annoying bugs of Front Row in Mac OS X 10.5.x (Leopard). Unfortunately, as Malcolm has pointed out, the only current work-around is to use a third party utility.
-Doug

2 noob questions about speaker settin

. What if I don't sync the Creative speaker settings with windows control panel speaker settings?
2. What if I the speaker settings(both Creative and windows) don't match my speaker type?For example, I have only headphone connected to my Audigy 2 ZS but I set the speaker setting to 5. or whatever else. Will this improve my sound quality in games such as Battlefield 2? Am I?supposed to get the virtual 5. surround sound effect? Because I've heard that cmss upmixes stereo sound in?games to virtual 5. or 7. surround sound for headphones.
Thanks.
Message Edited by jermin on 06-24-2008 02:09 PM

Re: 2 noob questions about speaker settings?slightlys I have a slightly different set up.
I have 5. speakers that I use for movies and some games. For BF242 I use headphones because they give you an advantage as you can hear people creeping up behind. The virtual surround sound is really good with my XFi xtremeMusic.
First I don't think it matters what you select under Windows Control Panel as the Creative Console Launcher updates speaker settings in Windows. Second if you want virtual 3d with CMSS on headphones just select headphones and enable CMSS3D. Then click the 'headphone' button on the CMSS3D tab and you can test the sound - a helicopter pans around in 360 degrees.
Then in games set the software to output 5. - AFAIK. Battlefield seems to do this automatically but I can't speak for other games. I'm assuming the Audigy has the same CMSS3D tech that the XFi has.

Reinstalling Front Row and Photo Booth?

Hi,
I had a hard drive failure a couple of months ago on my 20" G5 iMac. The Apple store replaced it in a day and reinstalled the OS. Thanks. Only after I had my entire computer set back up with all my apps, music, movies, etc., I realized that Front Row, and Photo Booth were not installed. How can I get them back on my machine without reinstalling the OS again? I tried Pacifier, but I don't know all of the different files and packages needed to intsall those two apps. Anyone know of a different solution?
Thanks

Hey there ... Go search for a program called Pacifist. Its a shareware but it will let you do the job. I used it before to Install Mail which I accidently trashed it. It should absolutely work for Front Row too. Hope this will solve your problem. Sawadee Krub

A few questions about the ka790gx and dka790gx

i have a few questions about the ka790gx and dka790gx , how much better is the dka790gx compaired to the ka790gx ? . how much difference does the ACC function make to overclocking etc , i plan on getting a phenom II 940BE or 720BE . i already have the ka790gx so would it be worth building another system using the dka790gx mobo , or should i keep what i already have and just change the cpu ?

It's largely irrelevant what other boards had VRM issues other than the KA790GX - the fact is it died at stock settings. Since there is little cost difference between the more robust DKA790GX (or Platinum if you really need 1394) why bother with the proven weakling? There are other examples around of the KA not having a robust power section. There's no way I would use even a 95W TDP CPU in the KA and absolutely not O/C.....!
As for the credentials of Custom PC, I have generally found their reviews accurate and balanced, and echo my own findings where applicable. If a little too infrequent.
The fact that the KA has such a huge VRM heatsink leads me to my other comments on the Forum, particularly regarding the "fudge" aspect:
"""Henry is spot on - the notion that adding a heatsink to the top of the D2PAK or whatever MOSFETS is effective is virtually worthless. The device's die thermal junction is the tab on the device back - which is always against the PCB pad. The majority of heat is therefore dissipated in to the board, and the fact that the epoxy plastic encapsulation gets hot is simply due to the inability of the heat to be conducted away from the device die via the tab. Not sure when Epoxy become an effective conductor of heat.... Good practice is to increase the size of the PCB pad (or "land" in American) such that the enlarged PCB copper area acts as an adequate heatsink. This is still not as effective as clamping a power device tab to an actual piece of ali or copper, but since the devices used are SMD devices, this is not possible. However, the surface area required to provide sufficient PCB copper area to act as a heatsink for several devices isn't available in the current motherboard layouts. Where industrial SBC designs differ in this respect is to place the VRM MOSFETs on the back of the PCB on very enlarged PCB pads - where real estate for components is not an issue.
Gigabyte's UD3 2oz copper mainboards sound like a good idea, on the face of it. However, without knowing how they have connected the device tabs to where and what remains a mystery. I suspect it is more hype than solution, although there will be some positive effect. From an electrical perspective, having lower resistance connecting whatever to whatever (probably just a 0V plane) is no bad thing.
The way the likes of ASUS sort of get round the problem is to increase the sheer number of MOSFET devices and effectively spread the heat dissipation over a larger physical area. This works to a degree, there is the same amount of heat being dissipated, but over several more square inches. The other advantage of this is that each leg of the VRM circuit passes less current and therefore localised heat is reduced. Remember that as well as absolute peak operating temperature causing reduced component life, thermal cycling stresses the mechanical aspects of components (die wire bonds for example) as well as the solder joints on the board. Keeping components at a relatively constant temperature, even if this is high (but within operating temperature limits), is a means of promoting longevity.
For myself, the first thing I do with a seperate VRM heatsink is take it off and use a quiet fan to blow air on to the VRM area of the PCB - this is where the heat is. This has the added benefit of actively cooling the inductors and capacitors too....
Cooling the epoxy component body is a fudge. If the epoxy (and thus any heatsink plonked on top of it) is running at 60C, the component die is way above that.....
It's better than nothing, but only just."""

Front end and Back end experience in SAP BW

Hi Friends...
Can ne1 plz explain wht things in SAP BW come under Front end and Back end experience......Thanks in advance

Generally, back-end would consist of the taks associated with configuration of data targets (ODS, Cubes), working with extractors, mapping data to the data targets, writing transfer/start rtn/update rules, and creating Infopkgs/ Process Chains.
Front-end deals with the use of the BW - writing queries, workbooks, web (although I think some of the infrastructure aspects of web reporting. e.g. javascript/templates might really could be considered backend). Think of Front-end as all of the client/customer/user facing components.

Question About Color's and Gradients

Hi all,
I have a question about color swatches and gradients.
I am curious to know, if I have 2 color swatches that I make into a gradient color, is it posible to change the tint of each indivdual color in that gradient and have that applied to the gradient without having to adjust the gradients opacity.
The reason that I'm asking this is because in creating a project I found that the colors that I chose for to make my gradient from my swatches were to dark, and while I can adjust each one's tint to my liking (if the object they were applied to was going to be a solid color) but that doesn't seem to apply to the overall gradient.
I hope that makes sense, I know that this was something that was able to be accomplished in quark and was wondering if I can do something similar.

If you double click your gradient swatch (after adding it to the swatches)
Then click a colour stop in the gradient, and then change the drop down menu to CMYK (or rgb)
And you can alter the percentages there. It's not much use for spot colours but it's a start.
But making tint swatches would be a good start anyway.
At least then when you double click the gradient (in the swatches) to edit it you can choose from CMYK, RGB, LAB, or Swatches and adjust each colour stop to your liking.

Question about clear page and reset pagination

Hi,
I have a question about clear pages and the reset pagination in an URL. What is the reason why a clear page doesn't also trigger a reset pagination on the pages which are cleared?
I can't really imagine a business case where it makes sense to clear all data of page items on a page and don't reset the pagination of reports on that page which probably use a page item in there where clause...
The drawback of this behavior is that a developer always has to set the reset pagination checkbox when he clears the target page and the even bigger drawback is that if you specify other pages to clear, you can't reset pagination for them, because reset pagination only works for the target page.
Thanks for your input.
Patrick
*** New *** Oracle APEX Essentials *** http://essentials.oracleapex.info/
My Blog, APEX Builder Plugin, ApexLib Framework: http://www.oracleapex.info/

Enhancement request filed, thanks,
Scott

The question about portlet customization and synchronization

I have a question about portlet customization and synchronization.
When I call
NameValuePersonalizationObject data = (NameValuePersonalizationObject) PortletRendererUtil.getEditData(portletRenderRequest);
portletRenderRequest.setPortletTitle(str);
portletRenderRequest.putString(aKey, aValue);
PortletRendererUtil.submitEditData(portletRenderRequest, data);
Should I make any synchronization myself (use "synchronized" blocks or something else) or this procedure is made thread-safe on the level of the Portal API?

HI Dimitry,
I dont think you have to synchronize the block. i guess the code is synchronized internally.
regards,
Harsha

ISight, Front Row and Apple remote problems

I've been using my iMac G5 with the built in iSight for a month now with no problems, however a few days ago I tried to pause iTunes with the remote and nothing happend.
I have since tried to use Front Row and cannot launch it with the keyboard shortcuts, or indeed, find it anywhere on my hard drive. Very strange as I have certainly not deleted it and only updated it to 1.01 recently.
I have also tried to use my iSight to test the remote using an Apple help sheet but when I launch iChat AV it tells me I have no camera installed! I know it did work as I took a photo of myself when I first set the Mac up.
Apple's advice on deselcting the 'Disable remote control infrared receiver' checkbox in 'system preferences>scurity' confuses me further as I cannot find this checkbox anywhere.
I have performed all the updates with Software Updat, repaired permissions and checked the disk with no problems found.
Any advice?
Thanks in advance. Jon
iMac G5 Mac OS X (10.4.4)

Front Row will be included with the next version of Mac OS X to come out next year, version 10.5 (Leopard). Until it's released, there is no legal way for you to use Front Row. Also, until it's released, we won't know what hardware will work with it (as far as remote controls). If history is any indication, it will be a $129 upgrade for your current Mac mini.
There are a couple of options for you right now, though. There's a shareware program called Media Central that will work similar to Front Row for you.
-Doug

A question about item "type and release" of source system creation

Hello expert,
I have a question about item "type and release" of source system creation.
As we know,when we create a web servie source system,there will display a pop-up which includes three items as "logical system","source system"and "type and release".
About the item "type and release",when we push "F4" button,there will be three default selections as below:
"ORA 115     Oracle Applications 11i
TLF 205     Tealeaf 2.05B
XPD 020     SAP xPD".
Who can tell me when and how should I use the three selections.
And also I attempted to input the item by some optional letters except the default three selections and it seems that I can input it freely.
Thank you and Best Regards,
Maggie

Hello DMK,
Thank you very much for your answer.It is very helpful for me.
Can I ask you further about it?
I got that it is a semantic description item.
You said the default selections are set by our basis people.Would you like to tell me how should we creat a new value except the default ones for item "type and release"?Only by inputing the value in the item directly?But you see we canot see the new value item we created by ourself when we push "F4" button next time ,is that ok?Or do we have to ask basis people to define one new value item just like the default seletions before we use it.
Also if possible would you like to describe detail about "This becomes important when you are troubleshooting certain issues especially when RFC connection problems."
Thank you and Best Regards,
Maggie
Message was edited by: Maggie

Noob questions about front row and back up...

Similar Messages

Maybe you are looking for