Noob Request For Exporting Help

Hi
I took approximately 2.5 hours of video of my son's wedding last year using my 3CCD Panasonic NV-MX300 video camera and want to create an authored Bluray from the footage, which is spread over 3 DV Video tapes.
My basic principle was this: - to capture the footage as is to my PC and then edit it a little and do some work on parts of the sound which came out poor because I forgot to "zoom" the mic doh! Then I simply wanted to Export the timeline in order that the "finished Video" can be authored in another program.
My work with Adobe Premiere CS5 is extremely limited but after watching some tutorials, I have managed to capture the 3 DV tapes and have 3 clips (the 3 full tapes) in my Project. 2 of these clips are roughly 10.5 Gb's each and another 13.7 Gb - so 35 Gb ish of captured footage. I have placed these in the timeline and juggled bits of them into the right order using the Razor Edit Tool and have manged to increase the sound relative to the overall video in the half dozen sections which were "quiet". From my point of view this has been a huge learning curve and I have come from knowing nothing about this program to this point in a matter of a few days.
So when I open my "saved" project, it opens exactly as I want it to and plays perfectly within Adobe Premiere's timeline. The footgae has hardly been cut as I want the completed video as it was shot, save for the few bits I have cut and replaced elsewhere - for example there was a bible reading which I wasn't able to take properly at the time but managed to get the 2 participants to do it after the service and I have managed to place the reading into the exact part of the video as if it were shot during the service. As I have said, I used the razor tool to do this by using in and out points then cutting the portion between the two points and then inserting it at the correct position in an earlier section of the timeline. Using in and out points and the razor tool to create secondary clips within the 3 main clips was the technique I used to increase the volume within some of these secondary clips. My timeline is now perfect for me but so far hasn't been rendered. I am not sure what rendering is about and whether it is necessary to render the whole timeline before exporting.
I then tried to export the timeline. I want quality footage, which is hardly any different to the original. The video was shot Widescreen PAL at 720 x 576, 25 fps 32000Hz stereo - lower (these are the details from the "Exxport/Media" screen.
I do not want to degrade the quality so experimented the other day and exported to H262.Bluray 1440x1080, with 48000Hz stereo sound thinking this would give me a nicely sized video ready for Bluray authoring. I used 2-pass encoding and after a small while the estimated time was going to be around 30 hours.
I am using a Quad 660 processor with Windows 7 64-bit. My OS is within a RAID 1 setup and my scratch disk within a separate RAID 10 setup. I wasn't overly concerned with this time as I wanted a quality output. Last night after returning home from work, the encoding had completed but the Sequence01.m4v file came out at massively reduced and compressed at about 7.8Gb which wasn't what I expected at all and the quality was lousy breaking up, blocky and stuttering. The sound wasn't there as obviously it was captured as a separate .wav file so I then decided to remux the two files in tsMuxer but the resultant .m2ts file played the sound ok but not the video which paused on the opening frame!
OK so maybe my export settings were hopeless. Maybe I should have gone for an uncompressed Microsoft Avi file for export?
Before I experiment further maybe I can ask you guys with vastly more experience what I should do now please?
As I have said the timeline isn't rendered yet - does it have to be before exporting? My requirements are simple - to have a single video/audio file with quality matching the original. My concern isn't the time it takes to export, just so long as I end up with 1 video with synch'd sound ready to author. In this latter respect I will use Menus and Chapter points for navigation - am sorry but Encore is beyond me so will be using a third party program I have used before and will include some slide shows too. Previous authoring has been limited to 2xsingle layer dvd's and 1xdual layer dvd's. This time I want to improve quality somewhat with an aim to play back on a bluray BD25 - with additional slideshows etc and music tracks to acompany the slide shows/menus, I was thinking of limiting the export to no more than say 15/20 Gb's but obviously more that the 7.8Gb achieved after my first attempt.
Thank you for reading this far - any help and advice would be greatly appreciated.
Please bear in mind I do not now want to amend my timeline in any way as I have spent enough time on it already, so really need answers limited to improving the quality of my export.
TIA
Paul

Thanks Ann - I think you have nailed the problem.
I am really struggling now as I found out yesterday that VideoStudio Pro X4 doesn't do what I want it to in giving me automatic options to add slideshows/music tracks and menu templates as MovieFactory does. Having upgraded to MovieFactory 7 now, so as to take advantage of it's BluRay capabilities, I am back with the original problem
VS seems to allow you to "Distort" the video back to 16:9 format but this is not an option in MovieFactory.. When I experiment with it's Multi-trim options, it plays back perfectly but after exiting that screen by pressing OK you then end up where you began so I am totally confused now.
I do have 2 things though: -
1. My saved edited Project in Premiere CS5
2. A 35 Gb .AVI file exported from 1. which plays back perfectly in Premiere, VLC Player and Windows Media Player.
If I have to I will export again from my saved project in Premiere but would need to know precisely what "export" settings to use which will flag up the resultant video in MovieFactory. I honestly cannot remember now what settings I used but remember that export took about 90 minutes. The export which DH described did not work and I have since deleted the file as it was terribly blocky and stopped and started every few seconds etc.
Now if I though Encore would give me "automatic" options to add slideshows music, Template Menus which I could play about with with videos embedded within them etc etc then I would jump straight into it.
My Deadline is to have a fully completed DVD/BluRay disc finished by 22nd May - I have 20 days to do this!
Hope you can help some more
Paul

Similar Messages

Script request for exporting, importing, inserting entry to Oracle 9i LDAP

Do anyone has the scripts for exporting, importing, inserting entry to Oracle 9i LDAP server? Thanks for help.

you can use ldapsearch utility to generate ldif files. Perform a search on the node you want to export and specify the output to be in LDIF format ( -L - this is a ldapsearch option). Once you have the ldif file, you can import it to any LDAPv3 complaint server such as OID. for OID, use ldapadd/ldapmodify utility to import the data.
These utilities are present under IAS_HOME/bin or ORACLE_HOME/bin.

Request for community help: profile-sync-daemon feature

Guys - I am attempting to modify profile-sync-daemon so that it parses out a user's $HOME/.mozilla/firefox/profile.ini and then syncs the corresponding profiles therein rather than simply syncing the entire $HOME/.mozilla/firefox directory. I have taken a stab at it which you can find in the latest commit in the unstable branch on github: https://github.com/graysky2/profile-syn … e/unstable
I'd like to ask for assistance. As you can see, the modified version does indeed parse out each user's $HOME/.mozilla/firefox/profile.ini into an array. What I can't seem to wrap my mind around is how to get the entire array to get passed down to the subsequent functions should it contain more than one element. For files that contain more than one, only the last one is passed.
Input is welcomed and thanks in advance.
Last edited by graysky (2012-11-26 20:43:30)

Thanks for the help and suggestions, all.
@aesiris - I checked out your code but found that it did not handle multiple profiles correctly. I didn't spend too much time on it since I already invested in the array solution proposed by alain.
I just now pushed a healthy beta to the unstable branch based on your both of your suggestions (from this thread and from private email). I have ALL supported browsers installed on my workstation and have been testing for the past 1/2 hour. I do not see any problems. I need a break
Anyway, please test it, bang away on it, let me know what is wrong.
Note - STOP YOUR EXISTING psd FIRST.
1) sudo systemctl stop psd.service
2) Copy the unstable code from github to your /usr/bin and `sudo chmod +x /usr/bin/profile-sync-daemon`
3) Start the daemon again
EDIT:
% profile-sync-daemon debug
::DEBUG MODE::
profile-sync-daemon version: 5.01
settings in /etc/psd.conf will make profile-sync-daemon manage the following browers/user combos when invoked:
browser:psname chromium:chromium
owner/group: facade:users
sync target: /home/facade/.config/chromium
backup target: /home/facade/.config/chromium-backup
tmpfs dir: /tmp/facade-chromium
browser:psname conkeror.mozdev.org:xulrunner
owner/group: facade:users
sync target: /home/facade/.conkeror.mozdev.org
backup target: /home/facade/.conkeror.mozdev.org-backup
tmpfs dir: /tmp/facade-conkeror.mozdev.org
browser:psname firefox:firefox
owner/group: facade:users
sync target: /home/facade/.mozilla/firefox/zzvngsqc.default
backup target: /home/facade/.mozilla/firefox/zzvngsqc.default-backup
tmpfs dir: /tmp/facade-firefox-zzvngsqc.default
browser:psname firefox:firefox
owner/group: facade:users
sync target: /mnt/profiles/djj43fbr.943
backup target: /mnt/profiles/djj43fbr.943-backup
tmpfs dir: /tmp/facade-firefox-djj43fbr.943
browser:psname google-chrome:chrome
owner/group: facade:users
sync target: /home/facade/.config/google-chrome
backup target: /home/facade/.config/google-chrome-backup
tmpfs dir: /tmp/facade-google-chrome
browser:psname heftig-aurora:aurora
owner/group: facade:users
sync target: /home/facade/.mozilla/aurora/imxbinbc.default
backup target: /home/facade/.mozilla/aurora/imxbinbc.default-backup
tmpfs dir: /tmp/facade-heftig-aurora-imxbinbc.default
browser:psname heftig-aurora:aurora
owner/group: facade:users
sync target: /mnt/profiles/poza1kl4.dv2
backup target: /mnt/profiles/poza1kl4.dv2-backup
tmpfs dir: /tmp/facade-heftig-aurora-poza1kl4.dv2
browser:psname midori:midori
owner/group: facade:users
sync target: /home/facade/.config/midori
backup target: /home/facade/.config/midori-backup
tmpfs dir: /tmp/facade-midori
browser:psname opera:opera
owner/group: facade:users
sync target: /home/facade/.opera
backup target: /home/facade/.opera-backup
tmpfs dir: /tmp/facade-opera
browser:psname opera-next:opera-next
owner/group: facade:users
sync target: /home/facade/.opera-next
backup target: /home/facade/.opera-next-backup
tmpfs dir: /tmp/facade-opera-next
browser:psname qupzilla:qupzilla
owner/group: facade:users
sync target: /home/facade/.qupzilla
backup target: /home/facade/.qupzilla-backup
tmpfs dir: /tmp/facade-qupzilla
Last edited by graysky (2012-11-27 21:28:05)

Request for technical help? Report generation?

I am developing a Inventory system for RealTech Trading,Ethiopia. But i am am facing difficulty to generate useful and important reports
i here by request any body who knows how to generate reports for java applications to help me.
this is Abiy Legesse form Ethiopia

What have you tried so far?

Back again with request for sound help

I get the opening fanfare when kde starts.
I also could hear a video that happened to be in a tab when Firefox started.
None of the sound programs (kcsd, amarok, etc) utter a peep.
Here's dialogue from a terminal:
]$ aplay /usr/share/sounds/alsa/Front_Center.wav
ALSA lib pcm_dmix.c:1008:(snd_pcm_dmix_open) unable to open slave
aplay: main:608: audio open error: Device or resource busy
Otherwise Arch 86-64 seems. EVEN cups started without any problem.
Don't wanna go anyplace else.
Your help very much appreciated.
Bill

Don't start several identical topics Bill, that is not the way to get help around here:
Still looking for help with Sound

A weird request for some help in mainboard OS X

I was thinking about getting MSI P35 NEO but before buying it need find some users that have some experience with installing OS X (osx86). And maybe a better MSI board would be recommended.
Want to know if this board and chip set is fairly compatible for for OS X install. I've used the 975x PPUE and it seems ok with a few minor issues. But need something better.

I think you should also try asking in our OS section.

Request for help in tuning the server which is running opmn process.

Hi Folks,
I request for an help in tuning the server which is running oracle app server opmn process , It is chewing arround 40% of the CPU resource,and our sysadmin is back of me to resolve this issues.
any feedback on this is highly appriciated...
Thanks in advance

Re: How to Achieve Performance Tuning
I hope you may find answers here..
Sharma

A Request for help from me again! Yay!

hi guys! I was working on implementing threads for the directions of the unit. When i press forward once...nothing happens, but when i press twice it gives me this HUGE list of errors. I dont have a clue. Again, any help would be appreciated.
import javax.swing.*;
import java.awt.event.*;
import java.awt.*;
public class NBoard extends JFrame implements KeyListener{
 int selection = 0;
 boolean selectionmade = false;
 final int WIDTH = 600;
 final int HEIGHT = 600;
 Image Viz =Toolkit.getDefaultToolkit().getImage(JOptionPane.showInputDialog("What character do you want?")+".gif");
 int XC = 50;
 int YC = 50;
 Thread moving = new Move();
 Unit Host = new Unit();
 public NBoard(){
 this.setSize(WIDTH,HEIGHT);
 selection = Integer.parseInt(JOptionPane.showInputDialog("What level design do you want?"));
 if(selection > 0){
 selectionmade = true;
 addKeyListener(this);
 this.setVisible(true);
 public static void main(String args[]){
 new NBoard();
 public void paint(Graphics g){
 if(selectionmade == true){
 if(selection == 1){
 g.setColor(Color.white);
 g.fillRect(0,0,WIDTH,HEIGHT);
 g.setColor(Color.black);
 g.drawLine(WIDTH/2,0,WIDTH/2,HEIGHT);
 if(selection == 2){
 g.setColor(Color.white);
 g.fillRect(0,0,WIDTH,HEIGHT);
 g.setColor(Color.black);
 g.drawLine(WIDTH/2,0,WIDTH/2,HEIGHT);
 for(int ctr = 1; ctr < 6; ++ctr){
 g.drawRect(WIDTH/4 ,ctr * 100, 20, 20);
 g.drawRect((WIDTH / 3) * 2 ,ctr * 100, 20, 20);
 if(selection == 3){
 g.setColor(Color.white);
 g.fillRect(0,0,WIDTH,HEIGHT);
 g.setColor(Color.black);
 g.drawLine((WIDTH/2) - 90,0,(WIDTH/2) + 90,HEIGHT);
 g.drawImage(Viz,XC,YC,this);
 public void keyPressed(KeyEvent e){ //The Problem Areas
 if(e.getKeyChar() == 'w'){
 moving.start(); //Starting the thread to move up
 else if(e.getKeyChar() == 's'){
 YC = YC + 2;
 else if(e.getKeyChar() == 'a'){
 XC = XC - 2;
 else if(e.getKeyChar() == 'd'){
 XC = XC + 2;
 System.out.println(e.getKeyChar());
 repaint();
 public void keyReleased(KeyEvent e){ //The Problem Areas
 if(e.getKeyChar() == 'w'){
 moving.interrupt(); //Trying to interrupt the thread once the key is released
 public void keyTyped(KeyEvent e){}
class Move extends Thread{ //The Problem Areas
 public void run(){ //The Thread
 Unit.XC = Unit.XC - 2;
 try{
 Thread.sleep(1000);
 catch (Exception e){}
class Unit{ //The Object which will hold all of the information about each unit
 static int XC = 30;
 static int YC = 30;
} By the way, here is my order of events, so you can look forward to seeing requests for help for them (hopefully not).
Threads: Moving the guy around
Threads: Making him shoot a ball at the mouses position
Network: Allow others to join/play game (This is gonna be HUGE probably), while host decides on game type.
Thanks for all the help so far!

Where does moving ever get started? Why does Move extend Thread instead of implementing Runnable? (Implementing runnable is preferred and often the correct way to do it and it is in this case)
But regardless there shoud be a moving.start() somewhere or start of the Thread that has the Runnable target Move.... I don't think I see one. Unless I missed it.
so...itll work if i change the setup to Runnable?

Request for proper information and to refuse to help when it's missing

On behalf of many of us volunteers who are getting tired of guessing the environment of those who are asking for help, I hereby
ASK ALL VOLUNTEERS TO STOP RESPONDING TO REQUESTS FOR TECHNICAL ASSISTANCE THAT DO NOT PROVIDE SUFFICIENT INFORMATION
In general, sufficient information should include:
1) Operating system and Service Pack, not just the family.
- Vista is a Family of operating systems. Insufficient information (need Home, Home Premium, etc.)
- XP is a Family of operating systems. Insufficient information (need Home, Professional, etc.)
- Linux is a Family of operating systems. Insufficient information (need Oracle Enterprise Linux 4 Update 4, Red Hat EL 4 Update 2, OpenSuSE 10.3, Fedora 8, etc.)
2) Version of database installed to 4 digits (9.2.0.6, 10.2.0.3, 11.1.0.6) and the database's ORACLE_HOME and ORACLE_SID
3) Which product being used to access the database, which computer that product is on, and the Oracle Home from which the product is run. (SQLPlus, same home as the database)
4) The output of lsnrctl status, the contents of the tnsnames.ora and the contents of the listener.ora
5) The output of the ipconfig /all or ifconfig and of hostname
6) Copy paste of the actual error message, not just a paraphrase of part of a line..
Any other ideas?

I am not requesting this to be enforced by the forum.
I am requesting that people like you and me reply by linking to this thread (or to the other excellent related threads) INSTEAD of replying. If we do it consistently, eventually the newbies will also enforce it voluntarily, and that will cut the useless teeth-pulling-effort replies to a minimum.
In your 90% posts figure - you do realize that that means 90% of the posts are badly formed and are wasting your time as well as mine.
Or - if they were properly formed - you and I could answer that with a lot less effort and a lot faster. With the implication is that the person asking would generally get a resolution a lot faster as well. Net result - you and I get to sleep more (or answer more questions) and people with problems are happier because they get them resolved faster.

I have AVI files that I need to be MOV files so that I can edit them in Final Cut Pro. I am going to use Quick Time Pro for this....do I have to 'export' it or can I just 'save as', or is there even a difference? Thanks in advance for your help!

I have AVI files that I need to convert to MOV files so that I can edit them in Final Cut Pro. I am going to use Quick Time Pro for this....When I have the files open in QT Pro do I have to 'export' it or can I just 'save as', or is there even a difference? Thanks in advance for your help!

I strongly recommend you use compressor to do the conversion (if it will open the files - since quicktime will open them, it will more than likely do it.
Compressor allows you to customize presets and save them and apply them to multiple files. Although the interface may seem daunting, it's actually pretty simple.
Even if you can edit the avi in fcp, it's not a good idea. Liable to cause problems down the road.

How can I get iTunes to answer my requests for help?

I have tried for a few days now to get iTunes to help me get some tunes that partially downloaded. Their initial response seemed to work but the next day the tunes were only partially on my PC. I re-installed the software, called the phone number on my PayPal receipt, sent another e-mail request for help, responded to their follow up e-mail a few days ago asking if my issue was resolved.........and STILL cannot get them to help me resolve. They say I should receive a response within 24 hours, and it has been longer. No phone number to call, the initial instructions to re-download the missing tunes were confusing

It is quite easy to find out how to redownload purchases, using the search bar ( by Support) at the top of this page:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
You can contact itunes support again by clicking Support at the top of the page, then clicking the link under Contact Us.

When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says: The request for account "iCloud" failed. The server responded with "502" to operation CalDAVSetPropertyQueueableOperation. Help!!??

When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says:
The server responded with “502”
The request for account “iCloud” failed.
The server responded with “502” to operation CalDAVSetPropertyQueueableOperation.
The request for account “iCloud” failed.
I am then given the option of staying Online or going Offline.
Can anyone help me?
thanks

Hello b.krushel,
Thank you for using Apple Support Communities
Any number of things could cause this issue, so I would recommend this article named iCloud: Troubleshooting iCloud Calendar found here http://support.apple.com/kb/TS3999.
These sections in particular:
General Troubleshooting
Make sure there are no current issues listed on the System Status that affect iCloud Calendar. The System Status is located on the iCloud Support webpage.
Make sure you have fully enabled iCloud Calendar for the client you are using (for more setup and troubleshooting information on iOS, OS X, Windows and iCloud.com, see the additional details below).
Check to see if the issue you are seeing is covered in iCloud Help. To search iCloud Help, visit help.apple.com/icloud.
Check your settings and preferences as something may not be set up correctly. For example, having incorrect date and time settings can cause issues which are easily resolved by entering the appropriate settings.
Troubleshooting Calendar on OS X Mountain Lion (iCal on OS X Lion)Note: For instructions on setting up iCloud Calendar with Calendar or iCal on your Mac, see iCloud Setup.If you are having trouble with Calendar or iCal on a Mac and you are using iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
Make sure you are using OS X Lion v10.7.2 or later. Click here for help verifying the version of OS X you are using.
Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in iCal. Click here for more information about troubleshooting your Internet connection.
Verify that your iCloud member name is entered into the iCloud Preference pane in System Preferences. See iCloud Setup for more information about setting up iCloud on a Mac.
Make sure you enter and update calendar information in the iCloud section of Calendar or iCal. Only calendars and events in the iCloud section of the Calendar or iCal Calendar list will be pushed to iCloud. Both Calendar and iCal for the Mac support the display of and interaction with multiple accounts and datastores, for example, iCloud, On My Mac, Exchange, Google, and so on. This makes it easy to create or modify events or calendars in a section of Calendar or iCal that may not be updating iCloud. Learn more about moving local calendars to iCloud.
In some cases, you may find that you have data duplicated in both the local On My Mac and the iCloud sections of Calendar or iCal. Learn more about resolving this issue.
You can make the iCloud calendar your default calendar for all new events. In Calendar on OS X Mountain Lion, choose Calendar > Preferences > General, or in OS X Lion, choose iCal > Preferences > Generaland under the Default Calendar heading, select one of the Calendars under the iCloud heading. Close the Preferences window to save this change.
If recent changes simply don't appear, try forcing Calendar or iCal to refresh by selecting Refresh All from theCalendar menu.
Make sure your account was successfully created in Calendar on your Mac (or iCal). After upgrading to iCloud Calendar, you may need to quit and reopen Calendar (or iCal). To confirm your account is configured correctly in iCal:
Open Calendar (or iCal).
Open Calendar (or iCal) Preferences.
Click Accounts. You should see an account with your iCloud member name entered.
Turn iCloud Calendars off and back on
Quit Calendar (or iCal).
Choose Apple () menu > System Preferences > iCloud.
Remove the checkmark in the checkbox next to Calendars.
Close System Preferences and wait about a minute.
Open System Preferences and choose iCloud.
Replace the checkmark next to Calendars.
Close System Preferences.
Open Calendar (or iCal) and test to see if the issue has been resolved.
Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
Take care,
Sterling

Request for Sticky #2 - Advanced Group Policy Troubleshooting Help

GPOMG!
Group Policy driving you crazy? Here are some advanced troubleshooting tools (beyond RSOP, GPRESULT, etc.) that may be helpful. For first level troubleshooting, check out this link:
http://technet.microsoft.com/en-us/library/cc787386(v=WS.10).aspx
EVENT VIEWER (NEW & IMPROVED!)
Event viewer in Windows 7 has more detail about Group Policy. Start your event viewer (may need to run as an admin. account). Navigate to:
Applications and Services Logs>Microsoft>Windows>GroupPolicy>Operational
Here you will find events that are related to Group Policy processing. You can determine how long it takes to run the various pieces of your particular GP as well as diagnostic information that can be very helpful when trying to figure out what is happening
with GP.
http://technet.microsoft.com/en-us/library/cc749336(WS.10).aspx
Events 4016 and 5016 show the start and end of processing of groups of policies, including how long it took to apply each one in the end event.
Event 5312 shows policies that will be applied, and 5317 shows policies that are explicitly filtered out.
Events 8000 and 8001 respectively show the total processing time for computer boot and user boot GP processing, and 8006 and 8007 show the same for interim/periodic GP processing.
GPLOGVIEW TOOL
A similar tool is called GPLOGVIEW. You must run this from the elevated command prompt. It will produce a XML, HTML, or simple text file of the GP events for export and review. You can even do a live monitor while you run GPUPDATE /force.
http://technet.microsoft.com/en-us/magazine/dd315424.aspx
GPSVR/GPSVC LOG FILE
If the normal tricks above don’t provide you with enough information, this should do it! There is a service called
GPSVR that gives you everything you ever wanted to know about Group Policy running on your workstation. Here is how to get more information from the GPSVR service in Windows 2008/Visa/Win 7.
Step 1: Enable logging in the Gpsvc.log file. To enable logging in the Gpsvc.log file, follow these steps:
Click Start, click Run, type regedit, and then click OK (might want to backup your registry first).
Make sure that you have the folder %windir%\debug\usermode, if the usermode folder is not there, then manually create it.
Locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion
On the Edit menu, point to New, and then click Key.
Type Diagnostics, and then press ENTER.
Right-click the Diagnostics subkey, point to New, and then click DWORD Value.
Type GPSvcDebugLevel, and then press ENTER.
Right-click GPSvcDebugLevel, and then click Modify.
In the Value data box, type 30002 (as hex), and then click OK.
Exit Registry Editor.
Reboot machine.
At a command prompt, type the following command, and then press ENTER: gpupdate /force
You will find the Gpsvc.log file in the following folder: %windir%\debug\usermode
Step 2: I use Notepad ++ to analyze this log file. It can help you troubleshoot, step, by step what GP is doing as your workstation/user is getting logged in. Timing, access/permission issues, SID information and more are all included
in this log file.
Step 3: When you are done, change the value of HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Diagnostics|GPSvcDebugLevel to 0x00000000 to disable the debug log or else it will continue to grow.
Charlie Newman

Hi,
I have posted an MST file which fixes this and other issues to the following thread here:
http://forums.adobe.com/message/2697135#2697135
Please post any feedback to that thread!
Kind regards,
Chris Hill

Requesting for your kind help...(want to preserve Leading & trailing spaces)

Hello Team, Can you please help in the following issue: I am trying to preserve white space(leading and trailing L&T) as is on the User Interface. We have built our UI using Flex 3.0 SDK. From Java side, I am able to carry the value with L&T spaces till the call goes to Flex .mxml and here response object assigning as var metaConfig:XML = event.result as XML; But here L&T spaces are not visible along with value of ID. I used to see it by using Alert.show(event.result.toString()); Flex Output is as: <allScalarMetadataFields> <id>TEST</id> <name>test name</name> . But from java[in Servlet/in service] side I can see the output as: <allScalarMetadataFields> <id> TEST </id> <name> test name </name> . Java(Servlet) code is as follows: OutputStream writer = response.getOutputStream(); OutputStreamWriter outputStreamWriter = new OutputStreamWriter(writer,"UTF-8"); JAXBContext context = JAXBContext.newInstance(object.getClass(), object.getClass()); Marshaller m = context.createMarshaller(); m.marshal(object, writer); .Here marshal follow a standard structure for XML to map it into writer same as what Flex XML follows..... Note, there is no any other issue/fault with Flex and java except this white spaces. Flex .mxml code is as: protected var _fieldXml:XML; public function MetadataFieldWrapper(xml:XML = null) { if (xml == null) { xml = <allScalarMetadataFields xml:space="preserve"> <id /> <name /> ... Servlet is getting called as : _webService = new HTTPService(); _webService.url = serviceUrl; _webService.method = "POST"; _webService.resultFormat = "e4x"; _webService.contentType = "application/xml"; . _webService.headers = { "serviceName":serviceName, "serviceMethod":serviceMethod }; _webService.send(param); I want to preserve the L&T spaces along with ID/name . Please help me how to allow these L& T spaces in Flex XML object? Thanks in Advance. Regards, Venu.

In the future this type of question should be asked on flexcoders as it doesn't relate to the development of the Flex SDK. To preserve whitespace look at the documentation for XML.ignoreWhitespace. -- Daniel R. <[email protected]> [http://danielr.neophi.com/] On Wed, Nov 12, 2008 at 8:19 AM, venubwal <[email protected]> wrote: > A new discussion was started by venubwal in > > Developers -- > Requesting for your kind help...(want to preserve Leading & trailing > spaces) > > Hello Team, > > Can you please help in the following issue: > I am trying to preserve white space(leading and trailing L&T) as is on the > User Interface. We have built our UI using Flex 3.0 SDK. > > From Java side, I am able to carry the value with L&T spaces till the call > goes to Flex .mxml and here response object assigning as

How do I get tech help for export pdf during Australian business hours?

How do I get tech help for export pdf during Australian business hours?

You can post your issues in this forum or send your questions to DL-exportpdf_feedback.
Jyh-Jiun Liou

Noob Request For Exporting Help

Similar Messages

Maybe you are looking for