Noob with a question, help plz!

A month ago i got a msi neo2 and amd3500 and set everything up fine, kept memory timings on auto etc. System booted fine. Then i decided to oc my comp, before i realized i should probably have a more powerful psu. Whenever i pressed enter to go into the HTT setting my comp would lock up. So i upgraded the psu, got this new ocz rev2 pc4000, and decided to give it another shot. The HTT option STILL freezes my comp. Its stuck on the 5x setting. Why is this option locking up my comp and how could i fix it? My main concern now is to get this RAM to run faster, and oc'ing my comp would be nice. Oh and when i installed the ram it wouldnt boot unless i put them in the furthest two slots, slot 3 and 4.
(I found the fsb setting at 200 but cant find the mulitplier as well, is this the HTT ?)
Ultra 500w xconnect
msi neo2 platinum- and yes i used live update
amd 3500+
OCZ Gold Edition Rev2 Dual Channel Kit 184-Pin 1GB(512MBx2) DDR PC-4000

if you plan on overclocking, i would update the BIOS to the latest version, clear CMOS and then try again.
HT multiplier are for the communication between the proc and the chipset (FSB x HTmult). If you plan on raising the FSB, lowering the mult could be needed.

Similar Messages

New user with a question..plz help

I have a MSI ms-6390 and i can not figure out on how to use my Vipper V770 agp card to work..i am curertly using the on board video..i went to bios and disabled the vga share memory size and when i restart it..both my onboard and my agp video card do not work..please help

I'd look further into your BIOS settings.
I am not familiar with that BIOs so I'm speculating. There is no need to disable the Memory share for starters.
It sould disable it automatically..I could be wrong here.
There should be a setting that will allow you to choose initialization settings. Something like "Integrated Peripherals" Under that setting there should be a setting "Init Display First"
AGP should be selected. You may have to play with these settings...That is if you can see your BIOS sisnce you claim that now both don't work.
Also try reseating Your Memory, you may have jostled it loose while you were in the case.

FMS2 noob with capabilities question

Thanks in advance for any help you can offer.
I am just learning the basics of FMS2 and have some simple
questions(I hope).
I currently have a php/mysql application that creates mixes
of mp3s.The songs are played using progressive downloads and this
is causing some concerns among the license holders.I understand
that by using FMS2 I can stream the mp3s instead.
My question is about keeping current functionality after
migrating to FMS2.
My mp3 player uses xml playlists.Its is already coded to hook
into flashcom streams if needed. To create a playlist, a user
searches the DB and adds songs to his account. I then use php to
write the added song data to an xml playlist. The playlist is
stored in the users folder, with a copy of the mp3 player. The mp3s
are all pulled from a specific location on the server.
From what I have learned about FMS2 so far(which is very
little), I am not sure if streams can be dynamically created in the
same fashion. I have seen plenty of info about FMS2 streaming mp3s
from a specific playlist with the mp3 all coming from the
application folder, but not any info about what I am trying to
attempt.
I would not be doing the coding myself, I can handle
php/mysql but I know very little about action script and have
little time to learn. But I want to know if I am barking up the
wrong tree. Are dynamic streams possible? I dont want to look like
an idiot when I try to hire someone to code an impossible solution.
Im not looking for a how to, just want to know if the capability
exists in FMS2
Thanks,
Matt

Yes... everything you're asking about can be done with FMS,
and fairly easily at that.

NOOB with remote question

Hi all, Im a noob here and just purchased the mega 180. I already have a couple of questions that I am hoping someone will be kind enough to answer. I have read through this forum and havent been able to find the answers (maybe looked in wrong place).
First, is it possible to use a different remote than the one provided? And if so, what others can be used or what software is necessary. Does the use of a different remote affect the HI-FI functions? As in, do you lose the ability to control those functions?
Second, could someone please tell me where I can purchase the MSI Mega TV tuner in the U.S.? And, if I get this tuner will the remote be able to control the media center 3 that ships with the mega? Will it be able to control the HI-FI?
Thanks for looking!

Of course you can use a differente remote and, of course you'll lose the HiFi functions
If your new remote have IR-learning function you can make it learn the codes of the original remote and use it directly with your Mega.
In PC mode, you can use almost every remote and learn the commands with Girder (http://www.girder.nl, actually moved to another site)
Regards

4 Question help plz

question: InfoObjects used in the Transfer Structure are
1. All InfoObjects from the InfoSource
2. All InfoObjects used in the Communication Structure
3. All InfoObjects in Application Component
4. All InfoObjects in BW InfoCube
QUESTION: InfoObjects used in the Communication Structure are
1. All InfoObjects from the InfoSource
2. All InfoObjects used in the all the Transfer Structures updating the Communication Structure
3. All InfoObjects in Application Component
4. All InfoObjects in BW InfoCube
43. Where do Application Components come from?
1. R/3 System
2. Business Component
3. On activating the InfoCube
4. On activating the Communication Structure and Update Rules
47. To upload data into the InfoCube, what do you need to activate and in order?
1. InfoCube -> Update Rule -> Communication Structure
2. Transfer Structure
3. InfoSource
4. InfoPackage
5. None of the above

When you install BC, the application component comes together with it; if it already exist in the target system there is no need to collect again otherwise, you have to collect it. If the application component is not collected and doesn't exist in the target system, the cube will be assigned to the unassigned node.
47. Either to update data from source system you need Cube, Update Rule, Comm/Structure, InfoPackage, Transfer Structure, but if you need to update from ODS you need the first three plus infoPackage, and data Mart which is Infosource. So we need all since the question never specified whether update from ODS or Source System.
thanks.
Wond

Mega 865 Question help plz

hi
ok after considering the 180 or 865 i decided to get the 865 instead,
and i read all the topics on the fourm regarding the 865 and i have some questions,
i'm planning to get a P4 2.8A 1mb cache and 533fsb Prescott, (i would get a northwood if they were easier to find and cheapter) i read that the mega supports prescott cpu's but with only half size card
my questions is that this CPU will work right cuz i was reading and i c that most users r using a E and no one uses A but the msi site said it supports prescott and this is prescott so i guess it'll work right?
also, i read that i need to flash the bios to work with sp2 and prescott cpu's, can i flash the bios after i install the cpu or flash it with no cpu installed?
my setup will be any comments on this would also be apprecitaed
mega 865
p4 2.8A prescott 533fsb
Samsung 2x512 DDR400
Maxtor or Seagate 160gb hb
Radeon 9600 PRO or XT or GF6200
a cdrw
thanks

yea i know northwood would run cooler and would be better then a prescott, but it's kinda hard to find northwoods now and even though i managed to find store that sells it here it does cost quite a lot
well i think i'll use the mega for watching movies, listening to music, internet and some gaming from time to time, should i get amd or intel based on wat i wanna do with it?
and yea i read all the sticky on how to cool it down and wat to do before setup..... but damn i'm still stuck ... amd or intel.??? LOL....

Kv vs creative question,help PLZ

i have a 5. li've sound card series without li've dri've!now...in kx driver is a very usefull option( 4 me) :i can set the sub way jack 2 function as a headphone way!i would like 2 have this option available on creative driver's cuz' (i repeat) is very usefull 4 me.
how can i modify bass and treble when i record from mic?i see an option in mixer(recording options- mic- advanced settins and playback settings) wich show's me the bass&treble volume bar but...they are NOT available.
0x a lot !

I'd go for the 1st G, for several reasons: the 2G is only marginally improved (unless you really care about the speaker and the volume buttons), but does not work with several older accessories such as chargers. Performance, games and such is exactly the same, from what I've heard. One thing, though, the 2 G supports the new headphones with mic and remote, that might be another selling point.
So all in all, I'd save the $70 and get the older one, but other people might think differently.

SATA cable question : help plz

I just recently bought an 875pe NEOFIS2R
& 2 WD raptor's..
Since my case is almost entirely see-through,
i like to hide every cable
But i read through my manual,and there was this
little chapter that said : "please do not
fold the sata cable in a 90-degree angle"
(or something like that)
sorry if this sounds stupid,
but are you really not allowed to bend the cables ?
I can't imagine you're forced to
let them just run through your case
in a straight line..

Hello,
You may actualy fold it a bit, as long as it is not 90 degrees.
The problem is that folding the cables very sharply causes data loss or corruption, it is like in audio equipment.
When you wrap everything together you will likely end up with a humming sound.
Just be carefull not to exagerate.
I do in fact like a few cables running around, it looks more "interesting".
But my concerns are not if it is a pretty sight, but mainly because I don't want to obstruct the airflow in the case and more important, I hate it when cables are running close to fans, they might get stuck in the fans.
Good luck,
Arthur.

Really weird problem with macbookpro. HELP PLZ:sys pref not responding.

The only thing I have done with my mac is add bootcamp. For windows based game.
But My problem is I try to click on system preference and nothing comes up. Nothing happenes.
Everything works fine with my mac, just can't get system preference to respond.
Will I have to reinstall leopard/reformat to fix or what?
thx
kevin

That would explain why it doesn't open. Apparently someone has deleted it by mistake.
You may be able to extract a new copy of it from your OS X installer DVD using [Pacifist|http://www.charlessoft.com>.

Noob with a question about overclocking.

Good Afternoon,
I just picked up an MSI A6000-029US laptop and am looking to overclock it to get a bit more from the processor. For reference, hardware follows:
Chipset: NVIDIA MCP79MVL
Processor: Intel C2D T6600 2.2GHz; FSB 800MHz
GPU: GeForce 8200M G
RAM: 2x 2gb 800 MHz Samsung PC2-6400 DDR2
I have installed the 64-bit Windows 7 upgrade and checked out an overclocking guide on slickdeals.net, but could not use the tutorial as I am missing a couple of drivers that did not transfer when I changed the OS to 64-bit. (SMB/SMU memory driver being one of them)
I am new to overclocking and working with the BIOS, etc., so any advice is appreciated.
Cheers,
Nick

Quote from: nartieri on 30-November-09, 05:39:34
Good Afternoon,
I just picked up an MSI A6000-029US laptop and am looking to overclock it to get a bit more from the processor. For reference, hardware follows:
Chipset: NVIDIA MCP79MVL
Processor: Intel C2D T6600 2.2GHz; FSB 800MHz
GPU: GeForce 8200M G
RAM: 2x 2gb 800 MHz Samsung PC2-6400 DDR2
I have installed the 64-bit Windows 7 upgrade and checked out an overclocking guide on slickdeals.net, but could not use the tutorial as I am missing a couple of drivers that did not transfer when I changed the OS to 64-bit. (SMB/SMU memory driver being one of them)
I am new to overclocking and working with the BIOS, etc., so any advice is appreciated.
Cheers,
Nick
I'd be surprised if you find any overclocking related setting in your bios. Make no mistake laptops can be overclocked but tools for that aren't widely available. You may reach for modded BIOS versions if the lappy if popular enough, but looking at the specs I'd wouldn't say so, so my guess is that you'll fail to find any modified BIOS revisions.
On the other hand, you may very well succeed with tools like setFSB which has the biggest number of supported PLL's - clock generators among any software of that kind.
Oh, and since you're using a nVidia based chipset, you may check out the nVidia control panel, if you're lucky it may allow for some O/C.
heads up mate

I gotta problem with security question recovery email I'd, mistakenly I entered wrong email I'd so now I want to edit that I'd plz help me

I gotta problem with security question recovery email I'd, mistakenly I entered wrong email I'd so now I want to edit that I'd plz help me

expresslane.apple.com to get a hold of itunes to reset them by email the only way

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help?

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????

Prep your new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU and return to the installer. Install OS X.

So i have a 2011 MacBook Pro and when i turned it on this morning a flashing folder came on with a question mark in the middle of it and it keeps flashing. So i tried googling any solutions and up so far nothing has worked. Please Help ?

I tried googling several solutions, but so far nothing seems to work. Everytime i start up my laptop i press CMND+R to make it go to the repair disk utility but instead it takes me as if i have to install lion when i had Snow Leopard 10.6.8. When i do go to the repair disk utility, on the eft hand side shows two hardrives one is Untitled and another is Hitachi, i tried downloading snow leopard 10.6.8 onto a Re-writable disc using my windows computer. When i insterted it onto the disc drive it came out under SUPER DRIVE and everytime i double click on the CD it says something about attaching images/ I also forgot to mention that the MAC OSX 10.6.8 Update shows on the left hand side on the bottom in DMG format. I dont know what else to do, please help?

DestroyGalaxies wrote:
a flashing folder came on with a question mark in the middle of it
This is the firmware telling you it can't find a bootable OS X volume.
Usually to solve this all you do is hold the option key down on the built in keyboard while booting the computer, this enters Startup Manager and then you choose OS X to boot, then in System Preferences > Startup Disk you change it to the boot volume and it tells the firmware.
Everytime i start up my laptop i press CMND+R to make it go to the repair disk utility but instead it takes me as if i have to install lion when i had Snow Leopard 10.6.8.
What you have is a 10.7 or 10.8 Recovery HD from when 10.7 or 10. was on the machine previously.
The Macintosh HD partition only was erased and 10.6 installed on it, without erasing the entire drive like what should have occured to remove the Recovery HD partition.
So you have a mucked up machine.
i tried downloading snow leopard 10.6.8 onto a Re-writable disc using my windows computer.
Well there goes your problem there, your downloading illegal copies of Snow Leopard from a untrusted location.
10.6 is not available for download, except from pirate sites. You likely have malware or a compromised system.
I dont know what else to do, please help?
What you need to do is call Apple via phone, tell them the make of your machine and order the appropriate 10.6 disks, they are inexpensive now. Some machines that came with 10.6.3+ origianlly need machine specific disks, other wise pre-10.6.3 Intel Macs can use the 10.6.3 white retail disks.
Once you have the disks, you need to backup your personal information off the computer to a external storage drive using the emergency quick copy method, then disconnect it to prevent mistakes.
Most commonly used backup methods
Next follow this proceedure and make sure to select the ENTIRE drive on the far left with the drive makers name and size, this will erase the entire drive, then install 10.6 from the disk
How to erase and install Snow Leopard 10.6
When finished setup the machine and log onto the Internet and use Software Update to get current on 10.6.8
Don't use pirated software, it's likely been compromised in some fashion.

HT204088 Dear sirs, Could you please help me on my problem with my apple ID I create new account with security questions, and when I try to purchase paid application,it ask me for answers the questions but it's not working, My account have 50$ and stil

Dear sirs,
Could you please help me on my problem with my apple ID
I create new account with security questions, and when I try to purchase paid application,it ask me for answers the questions but it's not working,
My account have 50$ and still didn't buy anything

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(100546)

Anyone help mac book screen White with a question Mark in the middle of the screen .matthew

Can anyone help my mac book screen has gone White with a question Mark in the middle of the screen .Matthew

Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

Noob with a question, help plz!

Similar Messages

Maybe you are looking for