(Noobie OCer) FSB down throttled despite manual settings?

I had a modest 2.4ghz OC going (10x240 166 divider=RAM @ 200mhz) and Prime95 passed about 12 hours, temps around 47c under full load. So far so good, or so I thought. After I was satisfied with Prime I checked CPU-Z for volt usage and here's where it gets weird... it turns out the FSB/HTT was throttled back to the default 200mhz, so I was actually underclocked (10x multiplier). Im not sure when it happened as I was away from the computer most of the time while Prime was testing. All I know is CPU-Z reported a 240mhz FSB when I first started Prime, which somehow turned into 200mhz somewhere during that span. When I rebooted into BIOS to check what was going everything was the sameas I started! HTT/FSB @ 240 x10, 166 Divider etc.
Ive had all automatic settings in Cell Menu turned off since the day I got the computer up and running. Everything is adjusted manually. AGP and SATA locked properly. Nothing has crashed or locked up, it seems stable enough. Anyone have a guess as to what the heck caused this?

1. System Specs which I thought followed forum policy and had enough information are afaik now exactly as per forum policy as stated here: https://forum-en.msi.com/index.php?topic=64858.0 . Please let know if I've missed anything.
2. I read the sticky post and there's, no reference to this problem I could see. Sorry if I should have replied in that thread, however my fuzzy logic moved me to post originally in the Overclocking forum because I wanted to overclock and it's late... 
3. I flashed the BIOS specifically because I had a Venice core and dual channel wouldn't work. Yes, I set optimized defaults after flashing.
If I've boobed by creating a new thread at this late hour, please delete it and I'll add a post to the 9.1 BIOS sticky thread.

Similar Messages

  • MOVED: (Noobie OCer) FSB down throttled despite manual settings?

    This topic has been moved to Overclockers & Modding Corner.
    (Noobie OCer) FSB down throttled despite manual settings?

    1. System Specs which I thought followed forum policy and had enough information are afaik now exactly as per forum policy as stated here: https://forum-en.msi.com/index.php?topic=64858.0 . Please let know if I've missed anything.
    2. I read the sticky post and there's, no reference to this problem I could see. Sorry if I should have replied in that thread, however my fuzzy logic moved me to post originally in the Overclocking forum because I wanted to overclock and it's late... 
    3. I flashed the BIOS specifically because I had a Venice core and dual channel wouldn't work. Yes, I set optimized defaults after flashing.
    If I've boobed by creating a new thread at this late hour, please delete it and I'll add a post to the 9.1 BIOS sticky thread.

  • Private IP Addressing---? Manual Settings

    Our Cbeyond service gives info that we have Private IP Addressing for Network Config. Public IP Addressing is not provided.
    Does that mean that I can't use Automatic but must do Manual Settings for Internet Accesss?

    Okay I know you are going to ask how.
    When you visit the above website actually when you visit any website, it needs to know your external IP address in order to deliver the information from that website to your browser.
    What the browser wants to do is send a command to the Web server on www.apple.com that looks like this:
    GET /index.html HTTP/1.0
    Here's how that happens. The command is made into a packet, a block of bits like a telegram that is wrapped with three important things; the source address (the IP address of your machine), the destination address (17.254.0.91 ), and a service number or port number (80, in this case) that indicates that it's a World Wide Web request.
    Your machine then ships the packet down the wire (your connection to your ISP, or local network) until it gets to a specialized machine called a router. The router has a map of the Internet in its memory — not always a complete one, but one that completely describes your network neighborhood and knows how to get to the routers for other neighborhoods on the Internet.
    Your packet may pass through several routers on the way to its destination. Routers are smart. They watch how long it takes for other routers to acknowledge having received a packet. They also use that information to direct traffic over fast links. They use it to notice when another router (or a cable) have dropped off the network, and compensate if possible by finding another route.
    Once your packet gets to its destination machine, that machine uses the service number to feed the packet to the web server. The web server can tell where to reply to by looking at the command packet's source IP address.
    This is your external IP address in other words the website needs to know where to send the webpage information back to.
    When the web server returns this document, it will be broken up into a number of packets. The size of the packets will vary according to the transmission media in the network and the type of service.
    So why doesn't it supply your internal address, well this is because your router uses NAT and it knows what client on the internal network asked for the information and it is the router (with the external IP address) which asks and therefore when it receives it back, it then forwards it to the client.
    As the router asked for the info, it is the router's address which is reported (the external address) and not the internal address.
    What this means is that everything you ever ask for on the internet is recorded by the websites you visit.
    iFelix
    PS In future Gino please start a new topic (referencing the one that sparked the question) to avoid over-complicating topics, thank you.

  • You cannot reconcile a/p invoice transaction with A/P Down Payment request manually

    Dear Experts,
    One of my client has facing this problem while doing Reconciliation then he is getting the following error.
    "you cannot reconcile a/p invoice transaction with A/P Down Payment request manually"
    then we found a solution in SAP Forums and applied the same in Test Company Environment, then its working good and also attaching the scenario with screen shot.
    Please have a look into the attachment then tell us. Is it a good practice to proceed or is there any solution as simple as this.
    One more thing is my client has having more 20000 records to do reconciliation and he is looking for any alternative solution.
    So please tell us a Better solution.
    We are awaiting for your prompt response.....

    Hi,
    Please check SAP note:
    1340606 - Paid Down Payment Request cannot be reconciled
    internally.
    Thanks & Regards,
    Nagarajan

  • D70 manual settings with studio flash

    I have a D70 and wish to use it with Bowen flash units with a remote wireless trigger. This is not the problem as I have two triggers both of which work fine. The problem is with the camera, I only ever use manual settings and keep losing the LCD display as I focus with the trigger attached. The image holds if the flash is open, but that is no good to me. Does anybody please know how I can hold the LCD display in the studio using manual settings.

    That's correct. All that's being done is pretty basic symbol animation. Tweens, eases, a lot of symbols within symbols for easy switching of parts. What confuses me most is that it opens fine in CS5.5. What features might CS6 have/not have to completely break the file?
    I also attempted to re-save the file in CS5.5 and then try opening it in CS6. This killed the program. Didn't even get as far as exporting a swf. All of my tools disappeared, all assets were corrupted, and the program just went on an endless loop of thinking and freezing.

  • Why do podcasts no longer auto-delete in new v10.6.3.25 on Dell laptop Win7 despite menu settings

    Why do podcasts no longer auto-delete in new v10.6.3.25 on Dell laptop Win7 despite menu settings?
    tks

    Found the error and posted a blog post here: http://www.red-abstract.com/blog/2009/11/19/itunes-90-and-auto-deleting-podcasts .html
    The issue is that Apple put this behind another layer of configuration on the podcasts screen. Go to that screen and click "Settings." You will see there that you can configure the podcasts individually or set the defaults to remove played episodes. Only after setting this will iTunes honor to auto-delete.

  • Different carrier, despite manual network selection

    Why does the manual network selection not fix the chosen network carrier.
    I use the option manual network selection, select my preferred network carrier, but once I loose the connection to the chosen carrier (train ride), my iPhone 3GS starts a new search and switches to a different available carrier, despite manual network selection activated. As far as I was concerned, manual network selection should prevent the iphone 3GS to search for a different carrier, except the one chosen.
    When I go back into the network selction menu, manual network selection is still activated and a checkmark is set on the preferred chosen network. Despite these facts, the iPhone 3GS is logged in to another carrier's network, indicated in the top left corner.
    This is a big problem, when I'm using my iPhone in another country. Roaming Costs are high!
    A quick search in the www indicateds, that I'm not the only one with this problem. As it can cause high additional costs, this problem should be fixed as soon as possible.

    honestly i don't think its a apple iphone direct issue.  here's what i know...i have had a no service on my 3gs  randomly coming up on my phone for nearly a year now.  i have done everything you've stated and still the same.  i recently just went to australia and used a telstra sim card and it worked flawlessly for 2 months.  i believe that bell and telus have changed their signal or something that is causing this but they will deny it to the bitter end.  so...why not just buy another iphone?  Exactly! thats what they want you to do!  It's just a ploy to get you to buy another phone. if you can get another carrier besides these 2 crooks i think you will find it works.  try buying a cheap prepaid sim card to see which carrier works best in your area before selecting a plan.

  • Screen orientation locked despite correct settings in control panel and side switch

    Screen orientation locked despite correct settings in control panel and side switch

    Make sure this logo do not appear on top right of screen.

  • Can't find ProPhoto RGB in drop down list in Color Settings

    I am trying to change my Color Settings in PSCS4 in Windows 7 64 bit computer.  I am printing in Lightroom so would like to change my Color Settings in PSCS4 from Adobe RGB to ProPhoto RGB.  When I go to the Color Settings Dialog Box in CS4 and go to Working Spaces, the drop down list choices under RGB do not include ProPhoto RGB.   They just include Adobe RGB, Color Match RGB, Monitor RGB, Apple RGB and sRGB.  I am not given the choice of ProPhoto RGB. 
    What am I missing here?
    How can I change my Color Settings to Adobe ProPhoto RGB in Windows 7 64 bit computer using PSCS4?
    Thanks,
    Matthew Kraus

    Well it appears in the drop-down list in my
    Settings dialog using Vista 64.
    Have you updated CS4 to version 11.0.1?
    You could also try resetting your preferences as described in the FAQ.
    http://forums.adobe.com/thread/375776?tstart=0
    You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
    This resets all settings in Photoshop to factory defaults.
    A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

  • Airport extreme will not fix problems or allow manual settings

    So I have a recently purchased airport extreme and the dreaded "flashing amber light" problem, but I can't find a solution that works. When I open my airport utility it says it has found an airport extreme that is experiencing problems, and then gives all the specs of my airport extreme (e.g. name, ip address, etc.) and says it is reporting problems.
    It then instructs me to press the continue button to resolve the problems. However, when I do that (or attempt to open the manual settings), it thinks and thinks and thinks while reading the configuration and then finally tells me that an error occurred while reading my configuration and I should make sure the airport is properly plugged in and in range of my computer, though it's plugged in properly and sitting immediately next to the computer.
    I would also note that the internet works fine on my desktop (being run through the airport to my mac), but just will not work on the danged airport.
    Any idea of what I can do now?

    It opens up a new window, but still gives me the exact same error message about not being plugged in or in range, though it is both of those

  • TS3991 iWork's on my iPhone 5 is stop syncing to my iCloud despite in Settings it is set up with iCloud

    iWork's on my iPhone 5 is stop syncing to my iCloud despite in Settings it is set up for iCloud. 

    You can change the linked email/sign in email for your iCloud and Apple ID accounts from 1 site,
    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
    Go to Manage your Apple ID
    Sign in with your current creditals
    On the left, click Name, ID and Email Addresses
    Under Apple ID and Primary Email Address, click Edit
    Type in your new Email.
    Go to Apple ID, click Edit
    Type in your new Email

  • My cursor isn't working on Firefox so I can't scroll down - I must manually hold vertical bar to move page - I've already tried troubleshooting - helped temporarily, but still problem now - cursor otherwise works on other servers

    My cursor isn't working on Firefox, so I can't scroll down - I must manually hold the vertical bar to move page.

    I have had this nagging problem several times. Each time more frustrating than the last.
    '''PDF''''s. If you have a .pdf page open in Firefox (as often happens when looking at brochures and whatnot from websites) the mousepad side scroll function will not work. Plugging in an external usb device works just fine, making the situation that much more aggravating.
    Simply close any windows or tabs from Firefox that are displaying .pdf's, and the blood pressure "should" return to normal values. If your blood pressure doesn't return to a satisfactory value, see your family doctor. He'll probably ensure your continued trust in Firefox is still better than any experience with explor.er.

  • HP LASERJET P3005N NOT PRINTING WITH MANUAL SETTINGS

    We have a subnet for our PCs and Thin Clients and we have a subnet for our printers.  The subnet for our PCs and Thin Clients is setup for DHCP service while the subnet for our printers is setup for static addressing.  The HP Laserjet P3005n printer is able to operate effeciently in DHCP mode; it picks up an ip and I'm able to print to it, ping it, etc.  However, it doesn't communicate with the network when I manually configure an address to it; I'm not able to print to it, ping it, etc.  It was working find with the original settings (static ip address) on a Friday then the problem started when the office opened back up on that following Monday.  I've tried different cables, assigning the printer's address to a different printer, different ports, and even installed a JetDirect card into it and it still doesn't fix the issue.....PLEASE HELP!

    <Is this because i just upgraded to 10.5.6? </i>
    No, probably not. I have no problems printing to my 3015 from 10.5.6.
    Is apple going to do something about this?
    Doubtful since it's almost certainly not Apple's problem, per se. Make sure you have the latest printer update, HP Printer Update 1.1.1, which should appear in Software Update if you haven't installed it and will probably appear in the "Installed Updates" pane of the Software Update preference. And if course if it's a networked printer you'll want to ping it to make sure that your system is actually reaching the printer.
    If you continue to have problems, you'll probably want to take it up with your IT people or with HP. But you can keep an eye on this thread and see if suggestions to the OP would apply in your case as well.

  • Workflow Upgrade 4.6C to ECC6 - manual settings during Cutover

    Hello Guys,
    We are upgrading to ECC 6 from 4.6C  and we are on release 701 & support pack SAPKB70106.
    I would like to know which are the "Manual activities" that needs to done during cutover and WHEN should these should be done (eg. before ECC6 upgade, or after ECC6 upgrade but before config/dev transports, or after config/dev transports).
    I have looked on few SDN threads and found the following info. Please correct me or add extra info if i have missed something:
    1. Configure RFC destination & WF user info in Transaction SWU3.
    2. Run Transaction SWU_OBUF to clear the runtime buffers before users start Testing.
    I assume rest of changes would be imported with transports, but i have read through lot of SDN threads that all custom Workflow definitions needs to be ACTIVATED in each system (DEV - QAS-  PRD)  and custom BOR objects needs be REGENERATED in each system (DEV - QAS-  PRD). Also, do I have manually set the agent assignement for Customer Task as GENERAL TASK in each system?  Are above stated 3 steps needs to be manually done in each system or transports take care of them ? I am bit confused. Could anybody please advise me regarding the Manual Task/activities that needs to done in each system during cutover during WF upgrade from 4.6 C to ECC6.
    Thanks for posting excellent stuff regarding the Workflow Upgrades on SDN. It really helped me in resolving most of my issues.
    Thanks in advance
    Kind Regards
    Sam

    Helli Viji,
    Thanks for the information. I still have some doubts.
    Yes , as you have mentioned there are many other mandatory settings in Transaction SWU3 that needs to be maintained in each system. I hope these settings are imported with the Customizing tranport request created in DEV or Do we have to maintain these manually just in case of Upgrade.
    For transporting the Agent assignment from one system to another, can we use Transaction RE_RHMOVE30 ? Or this functionality do not works when upgrading to ECC 6 from 4.6 C.
    Is there any other activity I am missing that needs to done during Cutover when upgrading from 4.6C to ECC 6 with regard to Workflows.
    Thanks
    Regards
    Sam.

  • How to restrict access to sub folders (apart from Manual settings)?

    Hi,
    Is there any method to stop the  group traverse from main Folder to sub folder when user group has access to main folder?
    So that no need to give no access to sub folders manually for given group.
    Manual access settings have become tedious due to large number of sub folder and user groups.
    Scenario:-
    There is a main Folder F1 and it has 100 Sub Folder SF1 to SF100. And these sub folders has child folders.
    Group G1 should have access only  F1, and should not have the access its child folders.
    How can we eliminate manual work to remove access for each group at each sub-folder level?
    Thanks,
    Anu

    Access restrictons by default are inherited from parent folders downward.
    You can break the inheritance, but you'll still need to manualy setup initial security.
    Details are in the Admin guide.

Maybe you are looking for