Noobie Question - Group Editing Environment?

Hi All -
Logic noob here, though not new to the studio, or the Mac … if this issue has been discussed comprehensively elsewhere on this forum, please feel free to point me there … here’s what I want to do:
Import & edit 8 tracks of recorded drums as a group.
Here’s how I work: I record my drummer at his place. We mic up the kit & record 8 tracks at once to an old ADAT-XT while he listens to my scratch reference track on an iPod, then I bring them home and dump them via lightpipe to an Alesis HD24 hard drive recording unit. For editing, I transfer the track files to the Mac Mini with a FirePort.
In Logic 8, I want to set up a template to import and edit these 8 tracks as a group, do a beat map function to establish the anchor, enable snapping to either beats or bars with zero crossings locked, so that when my drummer has a “senior moment” and stumbles a bit, I can simply cut out the nasty bar(s) and paste in a good one from another location in the track.
This app has a heck of a learning curve! Way too much horsepower for what I’m doing, I know, but it is what it is – I’ve got it, so I’m gonna have to use it … any quick & dirty hints?
Thanks,
mud

hey mud
using groups is explained in chapter 25, page 562 of the manual. You can define the behavior of each group in the Group Settings window. One of the handiest settings is the Region Selection (edit) which means, if you select a section of the song from one track, all in the group get selected and you edit all tracks at once, which is real good for multiple drum track editing.
setting up a template is real easy. just create a song with the tracks you want and any channel strip setting, group setting etc and under the file menu choose "save as template". just open that template every time you want to work that way in Logic

Similar Messages

Openbox noob question on menus.

I really do apologize about this insanely noob question but this is driving me up a wall.
I've read several several different resources on openbox (particularly trying to find information on the root menu)
i'm either looking in the wrong place - or I totally saw it and didn't put 2 and 2 together. *shrugs*
so, here is the dealio -
I'm trying to edit the root menu (or as I like to call it right clicky drop down thingy)
I'm running LXDE and from everything I've gathered over the last couple of days trying to tackle this
with lxde you edit the lxde-rc.xml instead of the menu or rc.xml
although after reading through it a plethora of times I noticed that it pulls off of the menu.xml as well...
*basically*
Which file do I actually edit to add stuff to the root menu?
and i've seen dozens of actual templates for editing the menu.xml and lxde-rc.xml but whenever *I* try to follow that I get a syntax error on openbox --reconfigure
and insight or even a swift kick in the ass that will land me on a site that has info that actually works would be ever so appreciated (even if its a search term - I think my problem now is that i've spent so much time looking for this one thing that I might actually be insanely over complicating this and not picking out the right information )

stlarch wrote:An easy way is to install obmenu
I can agree with that even though I'm not sure how to use that program very well. I'd rather learn how to manually edit the stuff, and not have to rely on another program
the main reason I got away from ubuntu was to be semi/forced to learn everything.
JackH79 wrote:Have you read this here as well?
I did glance at that but didn't think that was referring to the root menus...I can decifer through the xml those menu files to some extent...the stuff on freedesktop is straight crypic to me atm...but at least now I know I need to take a much closer look hehe.

Noob Question Re: Encoding to DVD

This is my first post in the adobe forums , so hello all!
I've been trolling this, and numerous other sites, hoping to understand the basic process of editing -> CD creation.
So here it begins...I am working on "work-out" video tape. The footage was shot using a Canon H10 to removable memory card. All files are .MTS, which don't pose too many challenges for my computer (i7 processor w/ 6MB memory) after the most recent PP update. Editing, adding AE, titles, graphics, or using Sound Booth is relatively painless. I have a total of (4) timelines that comprise the total video (Trailer, Intro, Instructions, and Workout). As I edited the video I'd often render what I had testing formats such as avi, MPEG2, FLV/4, Blu-Ray H.264, etc. I was amazed with the clarity and sharpness as I stayed with in the confines of 1980x1020. So I have no problems there. Once the editing, I first created a blank timeline and pulled into it the other timelines to make on timeline called "Video Complete". I dynamic linked that timeline to Encore and found out that amount of data, in that format, created a very unstable Encore - it screamed and hollered about running out of memory, etc. I watched several tutorials and found that dynamic linking the indvidual timelines gave me a much more stable Encore.
So I had the untranscoded .MTS files in Encore. I created my menu, linking the timelines, etc and built my project using the standard 720x480 (I believe) format. To say the least, I wasn't at all happy with the final product when watched on the television. Very pixalated/jagged around letters, etc.
I don't mind shopping around for the correct answer or putting my time in on research, I'd just like to know if I am on the right playing field and/or headed in the right direction.
So basically my questions are:
1) Is dynamic linking .MTS files to Encore the correct approach as opposed to rendering the .MTS files in PPro to avi or MPEG2 before bringing them into the Encore project? (Based on wanting the best DVD quality possible)
2) Transcoding settings for individual timelines should remain on automatic or should I adjust them and transcode before clicking on build project?
3) Since I was able to see MPGE2 renderings (from PPro) on my computer screen as sharp and clear, should I expect the same quality from a DVD product?
Any information would be helpful - thanks so much.
Joe

Re: Noob Question Re: Encoding to DVD
Hi, great questions:
I think this is a sound approach. MTS is short for MPEG-2 Transport Stream, so it's already MPEG-2 but will of course have to be re-transcoded for DVD to standard definition. If you want to experiment with high definition, you could try stripping the streams out of the MTS using a third party tool such as what you might find at videohelp.com - or not. Less transcoding is always better, but may not be practical. There's probably little advantage to doing this on the DVD side, but it might be worthwhile for Blu-ray? Or not.
First, try using Interpret Footage on the asset (the MTS file itself) - set it to SD Widescreen. You may need to Revert to Original if it's already transcoded. Try building another DVD and check the footage.
For the most part, yes. Of course, they will be standard definition on DVD.
Message was edited by: jbowden
Jbowden,
Thanks for the response. I will check out "Interpret Footage" on the asset of the MTS file and toggle to SD Widescreen. Will do that tonight so I can compare the two for quality.
Joe

2 noob questions about speaker settin

. What if I don't sync the Creative speaker settings with windows control panel speaker settings?
2. What if I the speaker settings(both Creative and windows) don't match my speaker type?For example, I have only headphone connected to my Audigy 2 ZS but I set the speaker setting to 5. or whatever else. Will this improve my sound quality in games such as Battlefield 2? Am I?supposed to get the virtual 5. surround sound effect? Because I've heard that cmss upmixes stereo sound in?games to virtual 5. or 7. surround sound for headphones.
Thanks.
Message Edited by jermin on 06-24-2008 02:09 PM

Re: 2 noob questions about speaker settings?slightlys I have a slightly different set up.
I have 5. speakers that I use for movies and some games. For BF242 I use headphones because they give you an advantage as you can hear people creeping up behind. The virtual surround sound is really good with my XFi xtremeMusic.
First I don't think it matters what you select under Windows Control Panel as the Creative Console Launcher updates speaker settings in Windows. Second if you want virtual 3d with CMSS on headphones just select headphones and enable CMSS3D. Then click the 'headphone' button on the CMSS3D tab and you can test the sound - a helicopter pans around in 360 degrees.
Then in games set the software to output 5. - AFAIK. Battlefield seems to do this automatically but I can't speak for other games. I'm assuming the Audigy has the same CMSS3D tech that the XFi has.

570 GTX TWINFROZR III Memory (noob question)

So i finally received my MSI N570GTX TWINFROZR POWER EDITION/OC card a couple of days ago , sofar quite impressed except for 3DMark11 scores
Anyways, can someone please explain to me this "Memory Clock Speed(MHz)" as in the specifications on the MSI Site it states that it is 4000.
On MSI Afterburner it says "Memory Clock (MHz)" is 2000. This confuses me
Please do note this is a Noob Question.

Quote from: mute_ZA on 14-June-11, 18:21:24
Thanks Svet, that makes sense and gives me quite a relief.
And if you look from some other applications like GPU-Z instead Afterburner, then you should multiply by 4 instead 2

Syncing & Streaming from the same Library? - Noob question

Good Evening - I have a silly noob question that I can't believe I can't find the answer to on my own: I have been trying to determine if it is possible to sync and stream from the same library simultaneously.
I purchased the 40GB aTV and it has been syncing just fine with my Windows iTunes. I told it not to sync a few albums I never listen to so I wouldn't have issues with other songs or movies. I am upgrading to a new iMac and I am am going to re-rip many of my existing CD's to get them into a consistent audio quality of 192 AAC or above. This is going to push my library size to well over the 40GB limit in just music, not including any movies or TV shows I choose to pull in.
The manual does not make it obvious (or I am not reading clearly) what happens to items that don't sync over - I assume they are still playable but will have to stream. Is there anyway to mark "preferred" albums or artists that should get synced and not streamed in case the iTunes library is unavailable for whatever reason?
Also, when I change libraries is the aTV going to completely re-sync even though the music is must going to be migrated?
Thanks for taking the time to answer these silly questions.

That's not quite what I was looking for.
My question remains, what happens to the items that can't be synced from my main library to my aTV? My library is just a smidge bigger than the available space on the aTV and not everything syncs over. Does that mean I won't be able to play those items not synced from my main library...
As my library grows I don't want to have to choose what does and doesn't get synced from my library by mood. For example, every year my wife buys new christmas music - right now I could exclude it and everything else gets copied over, but come thanksgiving that stuff better be there for her and I don't want to choose other music or movies to remove.
I guess I will just have to play to try it out.

Question RE Editable PDF

My problem is ...
I am working with a Nightingale-Conant program from Garrett Gunderson called "New Rules To Get Rich," which has a PDF workbook to download. However, after having copied the workbook to my computer as instructed (twice now) when I return to work on my plan, the document will not let me pick up where I have left off.
I get a message when I reopen the workbook that says, "This document enabled extended features in Adobe Reader. The document has been changed since it was created and use of extended features is no longer available. Please contact the author for the original version of this document."
What do I need to do to have the workbook respond to continuous editing as I do the exercises?

Using Version X at the moment.
In a message dated 2/2/2012 3:00:38 P.M. Central Standard Time,
[email protected] writes:
Re: Question RE Editable PDF
created by George Johnson
(http://forums.adobe.com/people/George_Johnson) in Adobe Reader - View the full discussion
(http://forums.adobe.com/message/4182082#4182082)

Group editing

Is there a way to do group editing in logic similar to how you can in pro tools?
Im trying to allign a drum session Ive done with the the grid but want to be able to keep overhead and cymbol channels in phase with the snare etc. Im aware I could highlight every region each time but this is pretty time consuming.
Is there any easier way to do this?

jdunkley wrote:
Is there a way to do group editing in logic similar to how you can in pro tools?
Yes. Simply assign all of the drum tracks to the same group. This is done from the group box, found above each fader, right above the automation settings box.
You will need to open the group settings, and enable the "Region Selection(Edit)" parameter.
Now, selecting any ONE of the drum tracks will select them all, and any cuts, edits, etc... done to one drum track, will happen on all the drum tracks assigned to that group.

Another Noobie question - readLine()

Hi all
This is another one of the extreme noob questions. I wrote a small program to read form a text file
    String NetworkLine = new String();
    try{
        FileReader inputFile = new FileReader("Test.txt"); //
        BufferedReader in = new BufferedReader(inputFile);
       try{
           while (in.readLine() != null){
            NetworkLine = in.readLine();
            System.out.println(NetworkLine);
       }catch (IOException e){
            System.err.println("Error in reading the file");
    }catch (FileNotFoundException e){
        e.printStackTrace();
    }My Test.txt is
One
Two
Three
Four
Five
Six
without the *
The output I get is
Two
Four
Six
I cannot figure out why only even no. lines are being read. I inserted a breakpoint at the line
          System.out.println(NetworkLine);This shows me that only even no. lines are being read by readLine(). Any help will be appreaciated.
Thanks
Ayesha

    String NetworkLine = new String();
    try{
        FileReader inputFile = new FileReader("Test.txt"); //
        BufferedReader in = new BufferedReader(inputFile);
       try{
           while (in.readLine() != null){ // <-- This reads a line, checks it for null ,and drops it
            NetworkLine = in.readLine(); // <-- this reads the next line
            System.out.println(NetworkLine);
       }catch (IOException e){
            System.err.println("Error in reading the file");
    }catch (FileNotFoundException e){
        e.printStackTrace();
    }So the upshot is that you print every other line.
Corrected:
    String networkLine = new String();
    try{
        FileReader inputFile = new FileReader("Test.txt"); //
        BufferedReader in = new BufferedReader(inputFile);
       try{
           while ((networkLine = in.readLine()) != null){
            System.out.println(networkLine);
       }catch (IOException e){
            System.err.println("Error in reading the file");
    }catch (FileNotFoundException e){
        e.printStackTrace();
    }

Noob questions...windows emulation on mac OS 10.4

getting my ibook later this week and was wondering about windows emulation. i don't have an intel processor in my ibook (obviously), so what's your recommendation for a product that runs windows on a mac? and, total noob question, do i have to buy a copy of windows? i already have windows on my dell laptop.
thanks in advance for your help.

Hello,
so, do the new macbooks have some kind of software
pre-installed that runs windows? my friends who just
got a macbook tells me he can run windows programs if
he needs to.
The MacBooks have Intel processors in them. So, no emulation is necessary. They can directly install and run Windows if they want.
The reason you need a program like Virtual PC on an iBook is because it uses a PowerPC processor which Windows cannot communicate with. And, the PowerPC Mac's architecture is completely different.
So, that means you need a program like Virtual PC to completely emulate an entire PC computer. Basically, it is a program that simulates a real computer and then translates those Intel instructions into PowerPC instructions that your iBook can understand.
There is a severe performance penalty for all this translation. The iBook G4 will not perform like a regular Windows PC. It will be much slower, and you will need to be more patient. With a G4 iBook, you could reasonably expect your performance to be comparable to a 300 MHz PC running Windows XP.
With a 1.8 GHz iMac G5 and 2 GB of RAM, I was experiencing performance comparable to a 1.3 GHz Intel Celeron system with 256 MB of RAM (which I happened to have around for comparison).
But, for more intensive tasks, the performance was more comparable to a 500 MHz system.
Anyway, back to the Intel Macs. Those machine's only need a free Apple Utility "Boot Camp" to provide the drivers and create a Windows compatible boot partition:
http://www.apple.com/bootcamp/
And, then they need Windows XP Home or Pro. That's it.
With programs like Parallels, they can run Windows inside the Mac OS (or along side it) much like you would with Virtual PC:
http://www.parallels.com/en/products/workstation/mac/
i am trying to figure out where this might be useful
in the first place.
It is useful if you need to be able to run Windows software, but don't want to buy a PC. It's more convenient to have one machine that can do everything than it is to have a Mac and a separate PC.
Feel free to ask additional questions if you have them. Or, if you like, hit solved on the post if you feel everything is answered.
But, do let me know if I can answer any additional questions or need to re-state something clearer.

Noob question use dng converter or let LR convert to dng

Sorry for the noob question but I'm transitioning over to LR from aperture and I believe DNG is a good move for me. Now then, is there any advantage to using the converter over letting LR do it?

It really is the same integrated tool, yes. All the same preferences are there.
The only thing I am not aware if Lightroom can do is Extract Embedded Originals. But that's not something I'd ever do to my own RAW files.
Cheers

Noob question-- importing HD footage?

So, I have a question about editing HD footage--on iMovie on in general--that YOU probably already know, it's just been awhile for me. I've edited footage on non-linear programs in the past, but it's been QUITE a few years (we're talking like Premier, Media 100... never really used iMovie).
Basically, I have some footage that was shot of a friend's wedding that he was hoping I could pull from my former film student experience to help edit.
Problem is, the footage he gave me-- Quicktime files burned onto DVDs-- was just converted from the native AVCHD footage (from MTS files), into HD.
As I understand it, whatever family member shot the footage must have just copied it on-site from the camera's memory card to a computer/laptop HD (instead of just importing all the footage from the chip) to save time/space, and then was converted when it became apparent that the MTS files couldn't be edited.
As a default, I went to iMovie-- again, a program I'm not familiar with-- and "Import HD Project," but none of the files are selectable (I CAN import them as "Movies" though). From my Googling, I see a lot of talk about iMovie NOT being able to use HD footage, so I figured it was worth asking.
Basically, the options I'm faced with are:
1) Get the original MTS footage, reconvert it to something other than HD (apparently HD was chosen simply because the end result was a lot better/less pixellated than MOV or MPG files), and edit from that,
2) Ask him to borrow the camera that this was originally shot on, try to put the MTS footage BACK onto the memory card, and reimport it properly this time.
Anyway, I'd really appreciate any input you can give. I'd been meaning to do this for him for a few weeks now, but now that I've seen what a hassle it is, I'm really starting to have second thoughts...

phasmatrope wrote:
.....I went to iMovie.....and "Import HD Project," but none of the files are selectable (I CAN import them as "Movies" though).
The option in iMovie's menu File>Import>iMovie HD Project relates purely to importing older iMovie projects, that is, from versions iMovie HD 6 and earlier - these have an entirely different structure to versions '08, '09 and the latest iMovie '11.
So, for the wedding video, don't attempt to use that option - use File>Import>Movies. You indicated that this option worked for you, so go for it!
Forget all that you may have read about iMovie not handling High Definition video. As Tom said "You heard wrong". I've created countless HD projects in both iMovie '09 and '11 with no problems whatsoever regarding quality. The final quality is excellent, whether using the Large (960 x 540) or Full (1920 x 1080) import setting. But, bear in mind that I import 1080i AVCHD clips (.MTS files) directly from my camcorder (or from an archive), whereas you will be importing converted clips of possibly inferior quality. The best format to convert to is Apple Intermediate Codec (AIC), the very format that iMovie generates when ingesting AVCHD clips. In non technical language, AIC expands (decompresses) the video into full frames to enable efficient editing within iMovie.
The best solution is to follow Tom's advice and use ClipWrap to transcode the .MTS files (assuming they are still available). Otherwise, as I mentioned, simply import what you have using File>Import>Movies. Hopefully, the quality in the final product will be acceptable to all parties!
John

Noob Question: Flowing Input Dataset Row/Record IDs Through to the Score Model Output

I've got a noob question that I'm having difficulty finding the answer to: if my input dataset contains row/record IDs and I want to flow these through to the Score Model module output but *don't* want to include this column in model training (because
it's just an arbitrary row tag), how do I go about accomplishing this?
I am able to Project Columns and eliminate the IDs entirely early in the process but then can't really determine which input row a prediction is associated with because I've lost the IDs. I'm not quite sure how to accomplish what I'm trying to do via
the Metadata Editor, either.
Surely somebody else has dealt with this same question. If the solution is implemented somewhere in a Gallery experiment that you'd like to point me at, too, that would also be just as good as a written explanation.
Thanks in advance,
Kevin

Hey Kevin!
Sorry for making this process unclear :( Azure ML has a notion of Feature Columns
(by default everything is a Feature), that is columns/variables that are intended to be treated as part of the observation vector. You can use the Metadata Editor
and (after selecting the column(s) you want), mark the column as
Fields -> Clear Feature. This will have the semantics you desire - data attached to the input data while not being used for training.
Regards,
AK

Noob Question - PreComp Layers and Effects

I have precomposed a layer and am wondering why when I apply an effect inside the precomposed layer, it cannot be seen in the main timeline... for instance, I've created a logo on a billboard and precomposed the layer. I added it to the timeline and all is fine. Now, I tried to apply a 'vector paint' effect to a layer inside the precomp. It looks fine in the precomp, but it disappears in the main timeline. Also, I added trapcode particles inside the precomp. They do not show up in the main timeline either. Any advice would be much appreciated. Thanks to all.

I see them in the precomp but not in the main time.
Date: Mon, 29 Jun 2009 16:11:50 -0600
From: [email protected]
To: [email protected]
Subject: Noob Question - PreComp Layers and Effects
Do you see them when you clic on the "continuosly rasterize" button of your precom. it's the little "*" icon of your precomposition.
>

SSD and HDD? Noob questions

Hi, I've just purchased a reconditioned Thinkpad W540, spec is Lenovo ThinkPad W540 16GB, 256GB SSD, i7-4800MQ 2.7Ghz, 20BHS1DJ00. Noob question, because I've not owned a SSD before, can I install a normal hard drive as well? There are 1TB external drives going for around $70. I've just noticed these hard drive caddys - should I be using one of these? Are all HDD SATA II or III these days? Could I use this drive : http://www.ebay.co.uk/itm/1TB-HDD-HARD-DRIVE-FOR-LENOVO-THINKPAD-W540-Quad-Core-L430-L440-L540-S540-/321439122240?_trksid=p2141725.m3641.l6368 With this caddy: http://www.ebay.co.uk/itm/Nimitz-2nd-SATA-HDD-Caddy-for-Lenovo-Thinkpad-T440p-T540p-W540-/121509644281?hash=item1c4a8a07f9 Second question - what is the recommendation regarding installing software. Should I put it all on the SSD or on the new hard drive? I'll be using the Adobe suite so there's the whole scratch disks issue to get my head around. Thirdly, how do I prove my copy of Windows 8 is genuine and is there a backup of it sitting on my harddrive somewhere? I didn't receive a W8 disk. Thanks in advance for your help.

1) SATA versions are cross-compatible with each other, so you should be fine regardless of which SATA it is.
HDDs are also standard parts and aren't tied to a specific system. You can use anything that's 9.5mm thick and 2.5" diagonal. (Excluding WD VelociRaptors.)
The caddy should work fine. Functionally, they're just a glorified cable. Third-party caddies may have a different fit and finish from the rest of the chassis, though.
2) Depending on how much software you have, you'll want to choose the ones you use often and put those on the SSD. Ideally, none of the software you want to use while on battery should be on the HDD (avoids the HDD spinning up, thus draining battery).
As for Adobe and it's scratch disks, I'd provision a bit of the faster SSD at the risk of wearing it out sooner. The speed helps especially if your workload is heavy. Ideally, you would have enough RAM to never need to page to scratch disks.
3) The Windows 8 key is sitting in the BIOS. The installer should pick it up automatically.

Noobie Question - Group Editing Environment?

Similar Messages

Maybe you are looking for