Noon question about removing crosshair view

I hit a key and now I have a view over my composition of a crosshair look which I heard means its allowing a small window in the center to be ram previewed rather than the whole comp. How did I turn this on and how do I remove it? Thanks. (After effects cs5)

I'm not sure if we are talking about the same thing. I am supposed to be able to remove the region of interest view by clicking the button for it and that doesnt remove this is just lets me make on in the first place. I am talking about a wireframe look over my comp with a bunch of squares on the border and a cross in the very center. Is this the same thing?

Similar Messages

Question about Removing Permissions from the System Folder with chmod

Hi
I have a question about the removal of permissions from the System folder (and sub directories and files).
Background
Since installing a new HD, clean install of 10.6, application of updates and moving over backed up user directories I have had several issues with permissions.
I have read several threads on this and using disk warrior and other tools I have been able to fix most of the issues.
The Problem
The issue that remains is a permissions check using Disk Utility keeps reporting
ACL found but not expected on "System".
followed by an extensive list of sub directories and all.
Attempts to repair take hours and the same errors are reported.
Found Solutions
I have read about changing and/or completely removing the ACL from the permissions from the System using two different commands:
sudo chmod -R -N ./System/* ( to remove all ACLs)
or
sudo chmod -R -E ./System/* ( to replace all ACLs )
My Question is ( to the UNIX gurus):
What is the difference between the usage with -E and -R and which is the best approach for a Systems directory and (subordinates)?
Many thanks!!

OK
So I misread on the your instructions about the PW reset, did it, no harm in that. I did also select the options to reset all the permissions for all the accounts and the ACL issues were not resolved. My bad, I forgot to note that.
You do suggest getting and expert opinion but alas these are rather elusive. In most cases the Apple solutions is to do a complete reinstall... I have found that unless you completely wipe a drive and rebuild everything there are often artifacts left behind. Since I have full and redundant back-ups I would rather explore and hack a little instead of a dull old system reinstall. The irony is the system issue I had was it was the result a reinstall and combo update on a new drive. I recognize the risks of entering the realms of the System folders but I am willing to explore knowing full well that I have a path to recovery.
Thanks again for your insights. I come to the forums looking for insights and ideas but not a lecture...

Newbie question about entity and view objects

Hi everyone,
My first ADF application in JDeveloper is off to a difficult start. Having come from a forms background, I know that it is necessary avoid using post-query type lookups in order to have full filtering using F11/Ctrl+F11. This means creating an CRUDable view and getting as much of the lookup data as possible into the view without losing the ability to modify the data. In JDeveloper, I do not know how to build my data model to support that. My thought was to start with a robust updateable view as my main CRUD EO and then create a VO on top of that with additional EOs or VOs. But, I have found that I cannot add VOs to another VO. However, if I link the VOs then I have a master-detail which will not work for me.
For example, I have two joins to CSI_INST_EXTEND_ATTRIB_V shown in the queries below and need to have that show in the table displaying the CRUD VO’s data. It seemed that the best way to do this is to create a CSI_INST_EXTEND_ATTRIB_V entity object and view object. The view object would have two parameters, P_INSTANCE_ID and P_ATTRIBUTE name. Both the building and the unit are needed on the same record, and this is not a master-detail even though it might look that way. (A master-detail data control will not work for me because I need all this data to appear on the same line in the table.) So, I need help figuring out the best way to link these to the main (CRUD) view; I want as much of this data as possible to be filterable.
select
cieav.attribute_value
from
csi_inst_extend_attrib_v cieav
where cieav.instance_id = p_instance_id
and cieav.attribute_code = 'BUILDING NAME'
select
cieav.attribute_value
from
csi_inst_extend_attrib_v cieav
where cieav.instance_id = p_instance_id
and cieav.attribute_code = 'UNIT NAME'
Ultimately, I need to display a ton of data in each record displayed in the UI table, so a ton of joins will be needed. And, I need to be able to add records using the UI table also.
James

Hi Alejandro,
Sorry if I caused confusion with my first post. What I had in mind assumed that I could have a single CSI_INST_EXTEND_ATTRIB_V EO with a BuildingVO and UnitVO on top of it. So, I wrote the queries individually to show how I would invoke each view. When I realized that confused the issue, I rewrote the query to explain things better.
Now having seen your 2 queries. You need to create 2 EO. One for each table. Then create an association between the 2 aeO (this will be the join you are talking about). Then, you need to create a VO based on one of the EO and after you can modify and add the second EO (in here you select the join type).
After your done with this, youll have 1 VO that supports CRUD in both tables.
There were three tables in the query: CIEAV_BUILDING, CIEAV_UNIT, and T -- the main CRUD table. When you say that I should create two EOs, do you mean that they are to be for CIEAV_BUILDING and CIEAV_UNIT? Or, CIEAV and T? Assuming CIEAV and T, that sounds like it would allow me to show my building or unit on the record but not both.
By the way, everything is a reference except for the main CRUD table.
Look forward to hearing from you. Thanks for your help (and patience).

Three questions about removing a numbered Mail message file

ClamXav, the anti-virus program, has found several old messages filed by Mail.app v4.4 that are infected with various exploits. Finder shows that the filenames for these messages are numbered, followed by the email file extension, like this: 359959.emlx
Question 1: Can I simply delete these files individually via the Finder and do nothing else, calmly confident in the knowledge that Mail.app, robust as Apple engineers can make it, doesn't care a whit whether an individual mail file is there or not?
Or
Question 2: Do I have to locate them via Mail's interface and delete them from there because otherwise Mail.app, so fragile, will have a fit, die, explode or wither to a pathetic whimper of its former self because I had the temerity to delete a file without genuflecting and consulting it?
Or
Question 3: If I have to locate the files and delete them via Mail, how do I use the file name to point to a specific message in Mail's inscrutable interface?
Thanks.

I'd just delete them. However, if you're worried about it, just leave them alone. They can't hurt anything.

Question about removing/reinstalling iTunes

I recently bought an external HD because iTunes was swamping my c drive. In migrating my iTunes folders/libraries over today, I obviously corrupted some files or screwed up, because I get error msgs galore and cannot open iTunes from either the new ext drive (H) or the C drive. It asks me if I want to repair or remove iTunes, but when I hit repair, it tells me files are missing and to reinstall.
MY QUESTION: if I remove all existing iTunes apps and reinstall, will I lose my entire iTunes music library? I just downloaded the latest vs of iTunes today, before all this foolishness occurred.
HELP
Video iPod Windows XP

Leave iTunes (the program) on your C: drive.
Then put the actual music files on the external drive.
I have never had an iTunes upgrade delete my music files, but of course it is always safest to have a backup.
If you have rated lots of those songs, you might want to search for the iTunes library files and save them.
What are the iTunes library files?

Question about removing a node.. getting 'not found in this context' error

hi, i have the following code:
     public boolean deleteRunType(String runTypeName){
          //in this function we
          NodeList nl = Doc.getElementsByTagName("Run-Type");
          int numberOfNodes = nl.getLength();
          String attribute;
          NamedNodeMap attributes;
          for(int i=0;i<numberOfNodes;i++){
               attributes = nl.item(i).getAttributes();
               if(attributes!=null){
                    Node attributeNode = attributes.getNamedItem("name");
                    if(attributeNode!=null){
                         attribute = attributeNode.getNodeValue();
                         System.out.println("Comparing: attribute = " + attribute + "   to runTypeName = " + runTypeName);
                         if(attribute.compareTo(runTypeName) == 0){
                              System.out.println("Match!");
                              Doc.removeChild(nl.item(i));
                    }//end if
               }//end if
          }//end for
          return true;
//definition of Doc:
                    DocumentBuilder DB = DocumentBuilderFactory.newInstance().newDocumentBuilder();
                    Doc           = DB.parse(xmlFile);anyways, i am getting an error:
org.apache.crimson.tree.DomEx: NOT_FOUND_ERR: That node does not exist in this context.
     at org.apache.crimson.tree.ParentNode.removeChild(Unknown Source)
     at RunType.RunTypeXMLWriter.deleteRunType(RunTypeXMLWriter.java:58)
     at RunType.RunTypeXMLWriter.main(RunTypeXMLWriter.java:81)when i run it. it crashes on the Doc.removeChild(nl.item(0)); line.
why is this? I grabbed the child directly from the list, so it should exist in this
context. Maybe i don't understand the context.
Any ideas or suggestions? Thank you SO much for all the help. i am finally
starting to get the hang of XML, but i still have some hangups!

This is not an uncommon problem.
When you do getElementsByTagName() on a document, you get all elements by that name that anywhere in the tree of the document.
When you do a removeChild, you need to be pointing to the parent of the element you are removing.
If you change the removeChild line to :
Node parent = nl.item(i).getParentNode();
parent.removeChild( nl.item(i) );Also, it is generally not done to use a capital letter to start the name of an instance, such as "Doc". Initial capital letters are usually reserved for class names.
Dave Patterson

DW CS5 question about page layout viewed in different browsers

Hello.
I am still very new to Dreamweaver CS5 and I need help with the appearance of a new website that I have been creating. We are mac based and I'm currently using Mac OS10. The layout I have created should appear centered on the page and it contains a solid background image. When I view it on our macs using Safari, everything looks exactly as it should, but when viewing it on a PC using the Internet Explorer 8, the text, spry menu bar and image of a doctor on the right hand side (that is set to change every time the page is refreshed), all shift to the right. Any advise on fixing this issue would be extremely helpful. The index page and the pages under the obstetrics menu are the only ones that I have completed so far. Here is a link to the web page: http://www.advertools.net/COBGYN/index.html
Thank you for your assistance.

Hi
Yes, I am referring to the fact you are using absolute positioning for the divs, and that this is causing your problems.
If you change the top, left/right values you are using to position them to % values this will alleviate the problem, (not completely though). Instead of say -
top: 500px;
left: 450px
use
top 70%;
left: 40%;
The values are only examples and you will have to adjust these to suite your needs.
PZ

I have a question about removing scratches from your iPod?

Hi,
I was looking though a flyer I got in the mail from a computer store and they sell a product called "Apple Suace" that is supposed to remove scratches fom your iPod in 2 steps. I was wondering has anyone tried a product like this for their ipod Does it work and is it safe to use on your iPod?
lizabler
Fifth Generation iPod Windows XP

I have tried Apple Sauce, and have to say that
iCleaner does a better job, and it also cleans the
back of the iPod which the sauce does not.
http://www.ipodcleaner.com
Thanks for the tip. Can you buy the iCleaner at the store or do you have to buy it on the internet?
Thanks for your help,
lizabler
Fifth Generation iPod Windows XP

Question about dual monitors - view stretching across both screens

I recently switched from my desktop to a ProBook 4710s. The laptop is plugged into dual LG monitors. On my old desktop, I could keep the Photoshop program in one window (I could maximize it in one window) and drag the toolbar to the second window. Now, when I maximize, it stretches across both screens. This is pretty inconvenient, in that the image is cut by the borders of the screens (unless I unpin it). I would really appreciate any help.
Thanks in advance.

The HP website says the laptop only supports 1 VGA external monitor. What adapter are you using to split the VGA port and have you contacted the company to see how to make it show how you want? I found nothing on the HP site on running 2 monitors and a adapter to do it.

I have a question about DWG files. Can I open them on my MacBook Pro with OX 10.9.5 system?What app do I need to view and print them?

I have a question about DWG files. What app will allow me to open DWG files to view them on my Macbook Pro?

Perform this Google search: ".dwg files on mac." The results should provide answers for you.

Question about when L3 sticky information is removed on CSS

Hi everyone,
I have a question about L3 sticky on CSS.
I understand L3 sticky takes effect on the following situations,
1: until expiring inactive timer
2: until sticty table full
and
3: until the connection disconnect by receiving RST or FIN from client or real server
The "3:" means that CSS maintains sticky connection between specific client IP address
to real server (L3 stickty) when CSS has its information on sticky table.
And CSS has removed it from sticky table if CSS receive RST or FIN even if the inactive timer
abot its connection has not expired.
That is, CSS removed L3 sticky information from sticky table when CSS receive
RST or FIN from client or real server even if inactive timer has not expired and
in this situation, the next new connection from same client IP address is processed with
normal load balancing, in the result, the new connection from same client IP address
forwards other real server.
Is my understanding correct ?
Or CSS maintains L3 sticky information on the sticky table until the situation meets
"1:" or "2:" even if CSS receive RST or FIN ?
Your information would be appreciated.
Thank you in advance.
Best Regards,

What point number 3 means is the layer 3 sticky will take effect when a connection disconnect message is received from a client or a real server. This connection disconnect is received in the form of RST or FIN messages from the real server or the client.

4 questions about the the top boxes - SD box and Home media DVR

Hello. I am going to be getting Fios soon and I have some questions about the boxes. I will be getting the Home Media DVR and 4 SD boxes.
1) Do these boxes have timers on them to set so the box can turn off at a certain time?
2) Do these boxes have parental control and if so is it good enough to block things that I do not want my child to see?
3) How many people can access the home media dvr at the same time to watch already recorded programs
4) If the Home Media DVR is in the family room can a record be started from the bedroom over the SD set top box (even an hd show)?
Thanks for any help.

I have been using two Standard Set Top Boxes for about a year. I have Parental Controls on and all channels locked. When I want to watch a channel, I tune to that channel, note the LOCKED message, which tells me to press the OK button to enter ther Parental Controls PIN and unlock the channel for viewing.
This has worked flawlessliy for the last year -- ON THE Standard STB's.
I just ordered the Home Media DVR STB to replace one of my Standardt STB..
On the Home Media DVR:
I can set the Parentals Control PIN and lock the channels, in the exact same way I did o nthe Standard STB's. However, when tuen to ANY channel, I still ge the LOCKED message and instructions to press OK to unlock the channel -- BUT no matter how I press the OK button, the Enter your Parental Conlrols PIN dialog box willl NOT open. Nothing happens -- you CAN NOT view any channel.
Again, it is the EXACT setup as for the Standard STB, but the OK button will NOT unlock any of the channels.
If you unlock all channels and LOCK the Ratings, the same problem recurs: OK buitton will never open the "enter your PIN" dialog box.
I have received two replacement boxes and have spent hours on the phone with some very capable and helpful Techs -- no luck.
Has anyone else had the same problem? Here's how to test your Home Media DVR:
1. Menu-Settings-Parental Controls.
2. You will be prompted to CREATE youre Parental Controls PIN
3. Enter you PIN twice.
4. Use the > button to scroll to Enable On/Off and set it on.
5. scroll down to Control Channels
6. Press > button to See Locked Channels
7. Scroll down to Add/Remove Channels
8. Scroll right to choose LOCK ALL
9. Press OK and then scroll to YES to lock all channels
10. Press EXIT to get out of settings.
11. All channels are now locked.
12. Go to any channel
13. A black screen will appear with a lock silhouette with the word LOCKED below, followed by instructions to Press OK to enter PIN and unlock this channel. (plus how to change locks...).
14.Press the OK button and, if it is working, you will see a dialog box at the bottom of the screen that is titled: UNLOCK, with the channel listed and the instructions to "Enter your PIN using your numeric pad on remote to naje this channel availabe for all users." THere's a PIN box, which shows asterisks for each number entered, with "Press Exit to Cancel" below.
15. On the Standard STB, it works exactly as described in steps 1 thru 14. On the Media Center DVR, it works up to step `13, but in 14, no matter how you press the OK button, the UNLOCK dialog box never pops us. The Remote STB light flashes on the remove and the REMOTE yellow light flashes on the DVR, but nothng happens.
If you have a Home Media DVR, can you please try this and see if it works?
Thanks,
John

Some questions about Muse

First of all, I would like to say that I am very impressed with how well Muse works and how easy it was to create a website that satisfies me. Before I started a daily updated website I thought I would encounter many problems I will not be able to solve. I have only had a few minor issues which I would like to share with you.
The most problems I have with a horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html). Marking and copying of a text is possible only on the last (top) layer of a document. The same situation is with widgets or anything connected with rollover state - it does not work. In the above example it would be perfect to use a composition/tooltip widget on the first page. Unfortunately, you cannot even move the cursor into it.
It would be helpful to have an option of rolling a mouse to an anchor (like in here http://www.play.pl/super-smartfony/lg-nexus-5.html and here http://www.thepetedesign.com/demos/onepage_scroll_demo.html). I mean any action of a mouse wheel would make a move to another anchor/screen. It would make navigation of my site very easy.
Is it possible to create a widget with a function next anchor/previous anchor? Currently, in the menu every button must be connected to a different anchor for the menu to be functional.
A question about Adobe Muse. Is it possible to create panels in different columns? It would make it easier to go through all the sophisticated program functions.
The hits from Facebook have sometimes very long links, eg.
(http://www.leftlane.pl/sty14/mclaren-p1-nowy-krol-nurburgring.html?fb_action_ids=143235557 3667782&fb_action_types=og.likes&fb_source=aggregation&fb_aggregation_id=288381481237582). If such a link is activated, the anchors in the menu do not work on any page. I mean the backlight of an active state, which helps the user to find out where on page they currently are. The problem also occurs when in the name of a html file polish fonts exist. And sometimes the dots does not work without any reason, mostly in the main page, sometimes in the cooperation page either (http://www.leftlane.pl/wspolpraca/). In the first case (on main page), I do not know why. I have checked if they did not drop into a state button by accident, moved them among the layers, numbered them from scratch and it did not help. In the cooperation page, the first anchor does not work if it is in Y axle set at 0. If I move it right direction- everything is ok.
The text frame with background fill does not change text color in overlay state (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html). I mean a source button at the beginning of every text. I would like a dark text and a light layer in a rollover, but the text after export and moving cursor into it does not change color for some reason.
I was not sure whether to keep everything (whole website) in one Muse file (but I may be mistaken?). I have decided to divide it into months. Everyone is in a different Muse file. If something goes wrong, I will not have any trouble with an upload of a whole site, which is going to get bigger and bigger.
The problem is that every file has two master pages. Everything works well up to the moment when I realize how many times I have to make changes in upper menu when I need to add something there. I have already 5 files, every with 2 masters. Is there any way to solve this problem? Maybe something to do with Business Catalyst, where I could connect a menu to every subpage independently, deleting it from Muse file? Doing so I would be able to edit it everywhere from one place. It would make my work much easier, but I have no idea jendak how to do it.
The comments Disqus do not load, especially at horizontal layouts (http://www.leftlane.pl/sty14/2014-infiniti-q50-eau-rouge-concept.html). I have exchanged some mails and screenshots with Disqus help. I have sent them a screenshot where the comments are not loaded, because they almost never load. They have replied that it works at their place even with attached screenshot. I have a hard time to discuss it, because it does not work with me and with my friends either. Maybe you could fix it? I would not like to end up with awful facebook comments ;). The problem is with Firefox on PC and Mac. Chrome, Safari and Opera work ok.
YouTube movie level layouts do not work well with IE11 and Safari 7 (http://www.leftlane.pl/sty14/wypadki-drogowe--004.html). The background should roll left, but in the above mentioned browsers it jumps up. Moreover the scrolling with menu dots is not fluent on Firefox, but I guess it is due to Firefox issues? The same layout but in vertical version rolls fluently in Firefox (http://www.leftlane.pl/sty14/polskie-wypadki--005.html).
Now, viewing the website on new smartphones and tablets. I know it is not a mobile/tablet layout, but I tried to make it possible to be used on mobile hardware with HD (1280) display. I mean most of all horizontal layouts (http://www.leftlane.pl/sty14/2015-hyundai-genesis.html), where If we want to roll left, we need to roll down. Is there a way to make it possible to move the finger the direction in which the layout goes?
On Android phones (Nexus 4, Android 4.4.2, Chrome 32) the fade away background effect does not work, although I have spent a lot of time over it (http://www.leftlane.pl/lut14/koniec-produkcji-elektrycznego-renault-fluence-ze!.html). It is ok on PC, but on the phone it does not look good. A whole picture moves from a lower layer instead of an edge which spoils everything.
This layout does not look good on Android (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html#a07). The background does not fill the whole width of a page. There are also problems with a photo gallery, where full screen pictures should fill more of a screen.
Is it possible to make an option of scroll effects/motions for a fullscreen slideshow widget thumbnails (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06)? It would help me with designing layouts. Currently, it can go from a bottom of a page at x1 speed or emerge (like in this layout) by changing opacity. Something more will be needed, I suppose.
Sometimes the pictures from gallery (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06 download very slowly. The website is hosted at Business Catalyst. I cannot state when exactly it happens, most of the time it works ok.
I really like layouts like this (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a03). On the top is a description and a main text, and the picture is a filled object with a hold set at the bottom edge. That is why there is a nice effect of a filling a whole screen- nevertheless the resolution that is set. It works perfect on PC, but on Android the picture goes beyond the screen. You can do something about it?
In horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html) holding of a filling object does not work. Everything is always held to upper edge of a screen regardless the settings. Possibility of holding the picture to the bottom edge or center would make my work much easier.
According to UE regulations we have to inform about the cookies. I do not know how to do it in Muse. I mean, when the message shows up one time and is accepted, there would be no need to show it again and again during another visit on the website. Is there any way to do it? Is there any widget for it maybe?
The YouTube widget sometimes changes size just like that. It is so when the miniature of the movie does not load, and the widget is set to stroke (in our case 4 pixels, rounded to 1 pixel). As I remember ( in case of a load error) it extends for 8 pixels wide.
Last but not least - we use the cheapest hosting plan in Business Catalyst. The monthly bandwidth is enough, although we have a lot of pictures and we worried about it at first. Yet we are running out of the disk storage very quickly. We have used more than a half of a 1 GB after a month. We do not want to change BC for a different one, because we like the way it is connected with Muse. But we do not want to buy the most expensive package - but only this one has more disk space. We do not need any other of these functions and it would devastate our budget. Do we have any other option?
I’m using Adobe Muse 7.2 on OS X 10.9.1.
and I'm sending Muse file to <[email protected]>

Unfortunatley, there is no way to get a code view in Muse. I know quite a few people requested it in the previous forum, but not really sure where that ended up. Also, you may not want to bring the html into DW unless you only have 1 or 2 small changes 2 make. Two reasons. First, it isnt backwards compatible, so if you are planning on updating that site in Muse, you will need to make those changes in DW everytime you update. Second, by all accounts the HTML that Muse puts out is not pretty or easy to work with. Unlike you, I am code averse, but there was a lenghty discussion on the previous forum on this topic. I know they were striving to make it better with every release, just not sure where it is at this point.
Dont think I am reading that second question right, but there was a ton of info on that old site. You may want to take a look there, people posted a ton of great unique solutions, so it worth a look.
Here is the link to the old forums- http://support.muse.adobe.com/muse

Questions about using Bitlocker without TPM

We currently use Bitlocker to encrypt our Windows 7 computers with TPM. Now we are looking at encrypting some Windows 7 computers without a TPM. I see how to change the group policy setting to allow Bitlocker without a TPM. I have looked at a lot of other
threads and I have a few questions about how the Bitlocker without TPM works.
1) I see a USB drive containing a key is required for Bitlocker configurations without a TPM, say the end user loses this USB drive, what are the recovery options for their computer?
This article seems to indicate that without the USB drive connected, you are unable to even access recovery options http://blogs.technet.com/b/hugofe/archive/2010/10/29/bitlocker-without-tpm.aspx
We have recovery backed up to AD when Bitlocker is enabled, but how could we do this recovery on a computer on computer where it's USB is lost? Would we have to remove the HD itself and attach it to another computer to access?
2) After enabling Bitlocker on a computer without a TPM and using the USB Drive for the key, is there a way to also add a PIN or password protection at bootup?

Hi,
Sorry for my dilatory reply,
Configuring a startup key is another method to enable a higher level of security with the TPM. The startup key is a key stored on a USB flash drive, and the USB flash drive must be inserted every time the computer starts. The startup key is used to provide
another factor of authentication in conjunction with TPM authentication. To use a USB flash drive as a startup key, the USB flash drive must be formatted by using the NTFS, FAT, or FAT32 file system.
You must have a startup key to use BitLocker on a non-TPM computer.
From: http://technet.microsoft.com/de-de/library/ee449438(v=ws.10).aspx#BKMK_Key
For more Q&A about BitLocker, you can refer to the link above.
hope this is helpful.
Roger Lu
TechNet Community Support

A lot of questions about my MacBook Air

I am really new to re-using Apple computers.The last time I used an Apple computer was back in 1987 when the school and my family had Apple IIGS computers. I have been using PC's which reqiure Microsoft. I a lot of have questions (10 questions) about my MacBook Air and I hope you good people can and will help me.
Product: MacBook Air
Operating System: Mac OS X Version 10.7.4
1) I Downloaded MacKeeper because I was fooled. I had a bad feeling just before I Downloaded it and I should have listened to my heart. However, I didn't buy it or fully Install it. It was like a test run and then they wanted me to pay almost $100 for it. Thankfully, I didn't because I read it is Malware. I spoke with an Apple Tech at Apple Care and he helped me get rid of it (or so we think). I don't see it anymore on my computer. I read it can slow down your computer. How can you tell if it's really off of the computer?
2) When I open "Finder" and I see that there are people Sharing my computer with me. I went into AirDrop and it reads, "Other people can see your Mac as (my name) MacBook Air when their computer is nearby." I bought a HotSpot and while it's turned on and I selected it as my WI-FI connection I thought it would get rid of these people, protect what I type, me, my items, computer, etc. But it didn't.
I didn't know that I have to buy a exteral CD and/or DVD Player in order to connect to the brand new Modem and Router in one by NetGear. I am so used to PCs and the CD/DVD Players being built inside.
The people at Apple Store told me that there is an internal modem inside, but I don't know how to find it and what to do then. Should I use a Firewall?, An AntiVirus, AntiMalware, AntiSpyware, etc. Apple Care tech told me I don't need to get an AntiVirus.
3) Is there a new kind of Wireless Modem and Router that doesn't require a CD-ROM?
4) When I travel or fly and I am not close to home I was told by Best Buy and Sprint that I had to buy a mobile HotSpot to use the computer (WI-FI) safely. As I typed, I have one. But it's pretty expensive and only gives me 1 hour and 15 minutes per day to Stream. What can I do to use this computer safely Online when I am out of range from a Modem and Router? What do people do when they travel on airplanes?
5) This compter won't let me use "Raid." I think you have to have a newer version. I hard about Raid on the radio from Leo (can't recall his last name) who's a Tech expert.
6) Should I buy a ZipDrive? Apple Store Tech told me that I didn't need a ZipDrive. I just remember the episode of HBO's "Sex and The City" when Carrie looses everything because her copy crashed. Now, of course, I know that's a fictional show, but with PC's and Microsoft I have lost everything when it crashed, frooze up, etc. I know there's iClouds. I heard about Carbonite, but I have read the Pros and Cons about it. Mostly they are Cons about it. I just don't want to do anything wrong and mess up this computer.
7) Should I buy a new Printer/Copier/Scanner because mine is an HP. It's not new, but it works. I even have a CD-ROM for Macs. What about the new product called, "Neat"?
8) Is there a special product that I should buy to do Online Banking and/or other important stuff?
9) I saw and read about iWork in the Apps Store and it sounds cool. I still have alot of friends and colleagues who still use Microsoft. Is iWork good to use? Should I Download it from the Apple Apps Store or can a buy it at Apple? Is there another Word Processing Program that is great and user friendly and will work with Macs and PCs?
10) Should I Update the OS with OS X Mountian Lion Pro from the Apple Apps Store or buy it at Apple Store?
In advance, I wish to thank you in this Apple Support Communites for your help. Have a safe and happy holiday weekend!

1) Here are instructions for removing MacKeeper. Since it mostly consists of manually looking for folders and specific files, if you follow the instructions you either fail to find what you are told to find (because your AppleCare guide gave you complete instructions which you followed) or you'll find some additional files that need to be replaced.
2 & 3) I assume you are looking at the sidebar of a Finder window and seeing Shared and computers under it. Those are computers that you can potentionally share. To do so you'd need an account on their computer and a password. They are not sharing your computer.
AirDrop allows you to create an adhoc network for filesharing and it only functions when you have selected the AirDop item in the SideBar. Actually doing that merely announces to computers in the same network node that your computer is available for a file to be sent to. Even then you have to explicitly allow the file to be downloaded to your computer. Similarly you'd be able to see other computers with AirDrop selected and be able to send them a file - which they'd have to accept.
The only reason your NetGear Router comes with a CD is to install and run their 'easy' step by step configuration program. It can also be done manually with a browser. Read the manual to find the IP address you must enter to access the router's configuration menu. Apple's WiFi routers don't require a CD to install the software because the configuration software is already on your computer.
I do have my firewall turned on. AntiVirus software isn't a bad idea - I use Sophos having tested it for a review for our local User Group and I found I liked it better than ClamAVx which is what I'd been using before. Both are free.
4) I think you were scammed by Sprint and BestBuy. I use hotel, coffee shop, and restaurant WiFi spots and have for years. However, because they can be unsecured, I do not shop online or bank when I'm using them. I also use 1Password and don't reuse passwords so even if a sniffer should grab an account and password that's all it would get - one account.
5) Raid doesn't really make sense with a MacBook Air - a RAID involves 2 or more disks being used as if they were one.
6) Zip drive? No. External hard drive - yes. It isn't a question of if a computer's hard drive will malfunction, it is when. OWC has a nice selection of external drives and the Mac has a built in backup system called TimeMachine. Due to the way TimeMachine works, I've found that your TimeMachine drive should be at least twice as large - and preferably 3-4 times as large as the data you are backing up.
7) if your printer works and it has Mountain Lion drivers, why replace it?
8) Online banking is done with a browser - Use Safari or FireFox
9) If trading files with Windows users is important Mac: Office is your best bet. If not, iWork, Mac:Office, or LibreOffice are all good possibilities.
10) you can only buy Mt Lion via the App Store.

Noon question about removing crosshair view

Similar Messages

Maybe you are looking for