Normal Correction/Development Activity not creating SDMJ type correction

HI
i am doing implementation project in Solution Manager , and i have activated ChaRM for my project and it has created a tasklist starting with "I" as well.
Now when i create a change request of Subject Type: "Development(Implementatio)" it creates change of type SDMI intead of SDMJ??
i have activated the BC set SOLMAN40_CHARM_TRANSTYPE_SDMJ as well.
Please help to create type SDMJ request.
Thanks

Hi Sindra,
I think you have two questions open about this problem.
You can check the settings in SPRO -> Scenario Specific Settings -> Change Request Management -> Extended Configuration -> Change Transaction -> Change Transaction Types -> Copy Control -> Define Mapping Rules for Copy Controls. In the table displayed you can see the Subject Value that triggers the follow on document.
Hope this helps,
Rich Labib

Similar Messages

How to create Activenotes / Active Notes on pc

I want to create and edit Activenotes / Active Notes on my pc. I do not possess Outlook.
Unfortunately the Nokia PC Suite 7.1 does not offer such possibility (yet?).
Since, as I understood, Activenotes would be regular simple HTML docs, I have tried this.
However, HTML-files created with either VNU or OpenOffice cannot be read by the E71 (reported error: unrecognized fileformat).
If the source of a Active Note created on the phone is studied it appears a XML document.
XML-files created with either OpenOffice, and W3's Amaya are readible, however the content is not displayed.
Anybody got any suggestions how to to create and edit Activenotes / Active Notes on my pc (without Outlook)?
TIA
Message Edited by tbnl on 13-Jan-2009 01:09 PM

Is there data you want off the device?
Post relates to: Treo 800w (Sprint)

F9N7- IDOC FINSTA not created

Hi,
We are using IHC for inter company cash within group. Normally an IHC process chain runs overnight and we have no issue. However, today we manually ran F9N7, as overnight job did not pick up some payment orders and did not create bank statement.
On running F9N7 we were able to create bank statement(I see entry in table BKKM1) however system did not create IDOC type FINSTA.
How do we create idoc type FINSTA for both sending and receiving companies(bank statements) as i am unable to rerun F9N7 as bank statement is already created.
Kindly advise
Umang

Have you resolved the issue?

Normal Correction/Development Activity

i am creating Development(Implementation) type change request, , after setting the status of the Change Request In Development and created the transport request. after creating TR its status automatically resets to "CREATED" again and again each time i create transport request??
Plus if we have imported a TR once in QAS and reset the status to "In DEvelopment" and created new transport request , by again "Import Transport Request (Background) it will transport the new TR only??
For normal correction/Development Activity we ahve to import transport request manually from task list???
Thanks

Hi
This should slove your problem
Note 919477 - Normal correction reset to status "created"
santosh

Charm Normal Correction(Maintenance) not able to generate with SDMJ

Hi,
I have configured Servic Desk & CHARM newly. Urgnt correction is working fine.
But when i select the subject ' Normal Correction(Maintenance) ' in change request it creates a correction with Transaction type-SDMI
My requirement is SDMJ Normal Correction(Standard). why system is automatically taking SDMI insted SDMJ.
Regards
PK

Hi
Hav you activated the following BC Set
SOLMAN40_CHARM_TRANSTYPE_SDMJ
hope it solves
Regards
Prakhar

Normal corrections "SDMJ" are not visible under tcode "DSWP"

Hi!
I have the following problem by working with ChaRM and normal corrections.
There are two types of normal corrections:
1) Normal Correction (type:SDMI)
2) Normal Correction (type: SDMJ)
Problem
Since a few days it is not possible to see all the SDMJ normal corrections within tcode
DSWP --> Change Management --> Drop Down "Not Completed".
Only the SDMI normal corrections are visible there.
Questions:
how can this issue be customized in order to see the normal corrections of type: SDMJ in tcode DSWP?
Thank you very much!
regards

We implement SAP Work Center

Normal correction: how to assign developer or tester?

Hello,
I have implemented ChaRM. I have one concern infront of me regarding the process. My ChaRM is working fine. When I create a Normal Correction (NC) or UC, I can see the tab for Change Manager, IT Operator and Current Processor. I do want to know how the request will determine who is the developer or tester? Once I create a request, it is visible in the assinged person's queue. As I am not able to specify Developer and Tester in the request, how they will come to know about the CR?
In Partern Determination procedure, I can see SDHF0001 function is assigned for SDMJ and SDHF. I can only define 4 roles there. How can I add more?
Please help me ASAP.
Regards,
Rajeev
Edited by: Rajeev P on Jun 16, 2009 2:56 PM

Hi Rajeev,
did you have a look at the partner tab under "transaction data"? Is that what you are looking for?
It is just possible to display four entries under "fast entry", but you can assign lots of partners in the partner tab.
There are also several possibilities for the customization of the partner determination like access sequences, see IMG activity CRMC_PARTNER_AS.
Kind regards,
André

Confirm Successful Test in Normal Correction (SDMJ)

Hello,
In normal correction (SDMJ) workflow, the action Confirm Successful Test is selected in the Development with Release phase of a project/maintenance cycle. The status of the Change document changes to Consolidated after that, and you then be able to move the cycle to Test phase.
How can we customise the standard workflow so that Confirm Successful Test is selected in the Test phase? This seems to make better sense.
I'd appreciate any help from any one of you who have done some customising to the SDMJ standard workflow. Many thanks in advance for your help.
BR Li

Hi Li,
I had the same dscussion with my customers more than once, it is hard to understand to perform the action "Confirm Successful Test" before Test phase.
You could add another status to SDMJ (or a copy of SDMJ, for instance ZDMJ) before Consolidated.
But we selected another option, by using test messages during test phase and therefore following SAP standard process. So, a developer confirms successful integration/unit testing after he finished his development/customizing activities in dev by changing the status to consolidated.
If some issues are detected in Test phase, we are using test messages to correct it. But you are right, at the end of test phase there is no additional status which says: all is fine, go ahead and move it to production. Only be checking that all Test messages are finished, the Production transport approver can be sure, all issues have been resolved.
But by adding another status, please consider this: You have to create a copy of SDMJ (ZDMJ). After this, all enhancements and changes to SDMJ delivered by SAP, you have to do manually for your new transaction type ZDMJ, otherwise you will not get the functionality. That's why I'd recommend to use SDMJ as delivered by SAP and also use Test messages during test phase.
Best Regards,
Holger Slomka

CHARM: Developer and Tester same USER in normal correction

Hi Expert,
i'd like to know if in a normal correction it is possible that Developer and Tester are the same persone.
So the same user have to confirm development and confirm sucessful test.
Now if i try to use the same user i've an error.
Can you help me ??
thanks
Francesca

SPRO
search for Make Settings to Change Transaction Types, and select that activity.
Highlight SDMJ, select the Use Partner Functions folder on the left
in the table on the right:
The first column in the table is the status
The second column in the table is the partner function that the current business partner will be assigned to when save is clicked and the status becomes the first column.
The third column in the table is used for determining if partner functionsu2019 business partners are the same when the document is saved and the status becomes the first column. For example, the Tester (SDCD0002) equals the Developer (SDCD0001) when the status is Confirmed (E0009).
Delete the value in the third column to stop the comparison.

Inspection type 03 - PP/PI not creating auto inspection lot

Hello Experts,
I've read the Best Practices for PP and QM master data, as well as the BPs for Creating and Completing inspection lots.
I have 03 activated for my inspection type usage.
When the PO is released, I am not seeing an auto inspection lot.
Please suggest the troubleshooting steps to solve this issue. Some are auto creating and some are not, but my QM MData is correct for inspections...
Thanks
Verroz

Hi Craig,
I guess 'Insp. Char. required' in control key flagged or not, does not affect Inspection lot creation.
I just checked for existing 03 inspection lots and we do not have this field flagged.
My understanding is also based on F1 help which states
In the following situations, consistency check for the task list generates a warning message:
if you set the indicator in the control key but have not maintained
inspection characteristics for the operation or phase
if you have not set the indicator in the control key but have maintained
inspection characteristics for the operation or phase
Or have I missed something here?
Amol.

Customizing steps to make visible any SDMJ normal corrections in tocde DSWP

Hi!
I have the following problem by working with ChaRM and normal corrections.
There are two types of normal corrections:
1) Normal Correction (type:SDMI)
2) Normal Correction (type: SDMJ)
Problem
Since a few days it is not possible to see all the SDMJ normal corrections within tcode
DSWP --> Change Management --> Drop Down "Not Completed".
Only the SDMI normal corrections are visible there.
Questions:
how can this issue be customized in order to see the normal corrections of type: SDMJ in tcode DSWP?
Thank you very much!
regards

We implement SAP Work Center

Normal Correction document is reset to Created by itself

Dear everyone:
We have configured ChaRM - Solution Manager 4.0 (SP9). The ChaRM works fine on Urgent Correction, but not for Normal Correction. The Status of (Normal) Correction document always reset back to Created. It does not want to stay as 'In development' status.
Here is the step I took to create new change document with a Subject : Normal Correction(maintenance).
I authorized the change document, then I choose Maintenance Cycle (Normal/Periodic Maintenance).
Next document / correction document -> 8000000196, Status: Created. I choose set in Development. - Status of correction document is: In Development
Next step, I choose Create Transport Request - transport request generated for document. Then all the sudden the status of correction Document is back to Created.
And I can not go to any where else....
Would anyone please help me out?
Thank you.
Kind regards,
Rudy

Hi Steven:
There are some actions are the detail -
Action 1: (yellow light) During Creation
detail: (green) check successful
Action 2: (yellow light) Check Consistency:
detail: (green) Check successful
Action 3: (red light) for Copy a Solution Manager Context:
detail: (green) date/time stamp
(green) Processing SOCM_COPY_CONTEXT is started.
(red) Action could not be successfully executed (no processing parameter)
The other one has yellow status, and the processing parameter shown as
--> No container is available, for application name CRM_ORDER, Action profile SDMI_Action
Action 4: (green) set to 'In Development' :
(green) Processing HF_SET_STATUS Is Started
(green) Action successfully completed
Action 5: (green) Create Transport Request:
(green) Processing HF_Execute_Action Is Started
(green) Request ID and Number created
(green) Action successfully completed
As soon as triggered Create transport, then the Document status back to 'Created', and I only have two choices in the action button ... set in Development or Cancel Procedure.
What would cause this issue ?
Thank you in advance.
Kind regards,
Rudy

Charms : Background job not scheduled (normal correction) ?

Hi,
I am trying to run a dry cycle for normal correction but when i go to task plan in any ticket to release a request. When i schedule this job " release a request" , i dont see any job running in background in SM37. I think job is not gettin sceduled properly.
Please help me out

Hi,
All right. We need to dig this one
I guess you schedule the import by going the the tasklist
and you get a red flag for this activity in the calendar ? do you have any error message ?
If the messagein the task-list is not self-explanatory you can check the SLG1 log in SOLMAN. Which error message do you get there. (select the correct time frame, the log could be big)
My guess is that some S_RFC authorisation is still missing there
This authorisation is outside SAP_ALL and is often the cause of this kind of issue
Tell me the error message and we will hopefully fix this (I had the same kind of issue when I started last year)
best regards Xavier

Current Proccesor in normal correction activity

Dear all helpers.
Please, what is actual role for Current processor in activity normal correction? Is it developer? Or is it simple the one, who proccess the activity NOW, I this role is changing during life cycle of correction? My concern is, that there is possibility to choose developers and other roles at the sheet partners.
Thank you for explanation.
Many thanx
Petr

hi Petr,
there are indeed different way to interpret this. It can be a "current processor" whaterer the function behind or the "main processor", in this case this is fixed.
The fact that by default prompt to become the processor each time someone enters the document shows that SAP has chosen a moving value there.
In our company we have choosen a fixed value. This is the one doing the actual change. (customizing or development)
The other partner functions are well defined (like IT operator,...) and these partners are playing their role depending on the correction status.
Both approach are valid for me
best regards
Xavier

Not able to type a password when trying to create a domain

Hi,
I am trying to create a domain and in that wizard, in Administrator name and password for weblogic user, I am not able to type the password. Whatever I type it doesn't get reflected in the UI . if I press Next button Error comes as password is mandatory. I am using Linux OS.
P.S. I am able to type in Name and description fields.
Kindly advise.
Regards

If anyone else face this issue, then here comes the resolution -
Password Field Not Editable in Domain Template on Linux
Bug: 10394900
Added: 01-May-2011
Platform: Linux
On Linux, when creating a new domain using a developer template in the Oracle Fusion Middleware Configuration Wizard, the password and confirm password fields are not editable, and you cannot enter a password to create a domain.
Workaround: Do one of the following:
To work around the issue each time it occurs: Click the close window "x" button in the upper right corner of the Configuration Wizard. In the confirmation dialog that appears, click "No" to return to the Configuration Wizard. Now you can enter the password and confirmation password.
To fix the issue permanently:
Kill a scim processes. For example, kill "pgrep scim"
Modify (or create) the file ~/.scim/config to include the following line:
/FrontEnd/X11/Dynamic = true (follow case sensitivity)
If you are running VNC, restart the VNC server.
Run the Configuration Wizard again.
Regards,
Anuj

Normal Correction/Development Activity not creating SDMJ type correction

Similar Messages

Maybe you are looking for