Normal start up then a blank blue/white screen.............????
Apart from the fact that it was freezing before this happened, when I started my ibook up as normal it loaded normally, goes to the white screen with the apple symbol then goes completely blank.
No icons, nothing.
Really gutted about this - is this a connection problem? Any info would be a great help, thankyou
First try restarting with the original install disc an run Disk Utility to repair the drive. If you have to re install the OS make sure you select archive and install or else everything will be lost.
Similar Messages
-
Blue Screen at start up, then outline of a white box with ? inside appears.
My daughter is having a problem with her 13" Macbook. At start up, only a blank blue screen appears, then after a minute or so, a white box outline appears with a question mark inside it. Has anyone ever seen this?
That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'llsee a panel asking you to choose your language. Just press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead. -
I recently bought a Macbook Pro, this is my first Mac. I restarted it, but when it started back there was a plain white screen and then it prompted me to insert the reboot disk. Has anyone else had this problem and is there a way to do this manually like with PC's?
The new Mac's came with OS X Lion 10.7 and there are no boot disks.
Since it's so new, take it back to the Apple Store and let them deal with it.
If not you can hold Command and r (as in rotten) keys down and boot the computer.
You'll be presented with a several options, including one to reinstall OS X Lion provided you have a Apple ID, which means you have to use Safari in there to set one up. To do that you need to set up a email account with Google or Yahoo. Once you get the ID, then you can download Lion and reinstall it.
It's so stupid not having a copy of the OS on hand to perform your own repairs.
Of course Apple will be happy to sell you a $69 Lion USB stick.
Like I said, take it back to the store, and try to get your money back, that will force them to think about just giving you a replacement machine that works.
Lion doesn't work really but it can be acceptable until the patches get released. -
I messed up badly by trying to restore my brand new macbook pro by doing restart then command R and choose disc utility repair now when I start ,all I get is the white screen with a folder and a question mark,What can I do???help please
Can you still boot to the Recovery partition using Command and R whilst booting? Or did you wipe the Recovery partition as well?
If your Recovery partition is still intact, you can simply boot to it and reinstall the OS via the Internet. If you wiped the Recovery partition, you can hold down Command, option and R keys whilst booting and boot into true Internet Recovery mode. You'll be able to reformat the hard drive, erasing all partitions (format it as "Mac OS Extended (Journaled)" with a dingle GUID partition) and then reinstall the OS that shipped with your machine.
Note that you should use a physical Ethernet connection when restoring over the Internet - it's three times slower if you use wifi.
Try your Recovery partition first and if that doesn't work, use Internet Recovery.
Clinton -
My macbook pro won't start up. I get the white screen and the grey apple icon the spinning wheel......and it doesn't change !
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
Hi can anyone help with a mac that had magnet put on it. I turned it on and then off but a white screen appears with a file with a question mark on it?
File icon with ? mark on it means it can't read from the hard drive. The hard drive is now wiped or bad. If just wiped then you will need to reinstall your operating system, OS X. If bad you will need to replace the drive.
Start with booting the computer from the OS X install DVD that came with your system. If the Mac came with Lion Pre-Installed then you use the Lion internet recovery system to reinstall (Hold down Command+r keys or Command+Option+r keys to boot the computer from over the internet to the Lion recovery HD system).
Good Luck. -
My ipod turns on shows the apple logo, then turn into a white screen until it dies.
I was updating my ipod and it was almost complete, it restarted and the loading bar under the logo stopped. Then the ipod restarted again and now when it turns on it shows the apple logo, then turns into a white screen until it dies. After I charge it again it does the same thing automatically. Ive tried to restart and restore it but it wont work. What do I do? I've tried all the troubleshooting and nothing is helping. The screen is also cracked, this wasnt the cause because it worked fine for 3 months after it was cracked.
See if placing the iPod in DFU mode will allow a restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If not successful that indicates a hardware problem. It could be that the damage started with the drop that also caused the cracked screen and the damage progress to the problem you have now. An example would a cracked that has finally progressed to it causing the problem. -
my screen is completely white, i've tried holding lock and home buttons as seen on you tube something called 'white screen of death' its goes black (think it switches off) then back to the white screen need help fast please!
If you have not done a factory reset on the device, I recommend doing a complete factory reset.
Factory Reset - Warning this will reset device back to original factory settings.
This method will not erase any MDN/MIN information
Turn off the phone
Press Power + Volume Up/Down at the same time and hold until display will show a triage android screen
Display will show:
Reboot system Now
Apply sdcard:update.zip
Wipe Data/Factory Reset
Wipe Cache Partition
Use VOL Down key to scroll down to "Wipe Data/Factory Reset", press home icon to select option and wipe device.
Display shows "All user data will be wiped out", press VOLUME Up to continue or VOLUME Down to exit.
Press Volume Up
Press Home to select "Reset System Now" - device will reboot
If the problem persist I recommend having a store technician take a look at the device.
Copy and paste the link below into your browser's address bar for the store locator.
http://www.verizonwireless.com/b2c/storelocator/index.jsp -
When i start my mac and i got white screen with apple logo
when i start my mac and i got white screen with apple logo n spening round n round
Try here
https://discussions.apple.com/thread/4917686?start=0&tstart=0 -
Mac air start up,then pop-up yahoo mail screen, and ask me type password..how can i cancel it
Mac air start up,then pop-up yahoo mail screen, and ask me type password..how can i cancel it
Ok, finally I figure it out!!
You need to give computer access to the password of Yahoo.com
You go to the application "Key Chain" that is included in your MacBook Pro.
Then you go to the first tab that should say something with "Login/Session" and you should see all your saved passwords.
Scroll down to the saved password of "Yahoo: your-username @ ...
Click on it, you should see a window opening
Go to the tab "Access Control"
Then click on "Allow all applications to connect .. ", NOT the option "Ask every time for allowance" or you can also just add the program "MAIL" with the "+" icon !!
There you go, now you should not have to worry again !!!!!!
(this step copy form someone posted)
Anyway can fixed it!!!!! -
My daughter's old I Mac won't start. It is not backed up. We want to get some things off of it if we can.
When we turn it on, we get the Apple logo with spinning wheel for awhile, then a question mark briefly and then a sky blue blank screen. Is there any hope of getting this to work? This computer is out of warranty. Does it seem that if we reinstall the Operating System we might find old data?First try restarting with the original install disc an run Disk Utility to repair the drive. If you have to re install the OS make sure you select archive and install or else everything will be lost.
-
Using I Pod NANO. Installed I Tunes on Windows 7 Pro, 64 Bit.
Software works fine. Only problem is that I can't open up the
Store page from in the software. It just shows a blank screen.
Looks like it starts but then just freezes.
IT department worked all day. Reloaded software, set up
security, checked msconfig files. Tried all sorts or revissions.
Nothing works? Yet it works fine on my Windows 7 Home edition?
ANYONE have a clue. This Apple software is not the friendliest!!
This is very frustrating for something so simple to use!
This used to work. Upgraded to 10.3.3.. No good. Tried other revisions,
No Good! Can't purchase music or have the website fully pull up at all
from I Tunes.
Appreciate any help if some has been through this. My service that
I have for IT had to give up. 6 hours of things they tried. Nothing worked.You would get better response from the iTunes community forum.
Have a nice day! -
Opened up the PB from sleep yesterday and was greeted with a blue, then red, then green, then white screen. Fan started up but no chimes. No icons or other symbols on screen. Tried to restart and force shutdown with no improvement. Each time I restarted, the same blue, red, green, white cycle.
Had no apps open when PB put to sleep prior to this problem.
Help!I just got a g4 15 in from ebay, worked fine yeasterday and today. This evening it went red, green, blue then white. I read the posts and thought great bad logic board. I squeezed the display at the edges (I had a 5300 cs that did a simlar thing) and the screen came back on. Anyone else have any luck with this?
-
My Ipod touch only has a blue/white screen.
My Ipod Touch 3rd Gen 64gb was working perfectly til yesterday when the screen is now just blue/white. It still will darken when i press the lock button. I've tried reseting and restoring and this does nothing, screen remains the same. It makes all the right noises, when I connect it to my Macbook it makes the normal noise and is connected no problem. But all I can see is Blue and white pixels. Does the LCD component need replacing?
If yo still have a problem after restoring the iPod to factory defaults/new iPod then you likely have a hardware problem. It could be the screen or it could be the electronics driving he screen. I would make an appointment at the Genius Bar of an Apple store.
-
What do I do when I start my iMac I get a white screen with an apple and a moving circle?
All I get when my iMac is turned on is a white screen with an apple and a moving circle. What should I do to get the iMac to boot?
Do you have reliable backup you can restore from, as an erase and re-install may be required?
Before you got down that route, it's possible that it might get fixed if you try again. Not sure about that particular error, but I have had errors in the past that Disk Utility wouldn't fix on the first attempt but then subsequently did.
It's also possible that the (around $99, I think) Disk Warrior might resolve it - but not guaranteed.
However, I just found this thread: https://discussions.apple.com/thread/3862376?start=15&tstart=0 have a look at Nirvi's post at the end - there may be hope (I've not tried this, although it seems to have helped a few, although not everybody - so at your own risk and I wouldn't try it if I didn't have backup).
Maybe you are looking for
-
How Do I use my External Drive for my iTunes Library without adding anything to my Mac's HD?
I have a new MBP and have transferred all of my music off my old pc (250+ gigs) to a Lacie 1TB thunderbolt external drive. How do I use the external as my primary itunes library with out using any of my Mac's HD? I'm new to mac so I have a few more
-
Gaming apps freezes for few seconds , then resumes by itself or crashes sometimes ,after upgrading to iOS 8.3 on iphone 6
-
Validation when creating G/L Account
Hello, At the present moment I have all company codes with the same account group. But I need to make one field obligatory for some company codes and not obligatory to others company code. Is there any standard way of doing it? Thanks everyone.
-
A blinking cursor appears on every web pages.
It's a blinking cursor that appears on every web pages in different sizes when I click anywhere on the web pages. Look at following pictures please: http://samansh.persiangig.com/2011/cursor4.jpg http://samansh.persiangig.com/2010/cursor.jpg http://s
-
Application Background Image ?
Hi Folks, Instead of a dull background color, how do I show an image during 1-2 seconds, while my application is loading? Thanks for your help, VC