Normal, then slow response to remote control

I just had FiOS TV installed less than one week ago (on 1/15/10) and have noticed the following annoying behavior: After powering-up my TV and Set Top Box (STB), the remote control responds normally. I am able to change channels using direct numeric entry or the Channel up/down buttons. Also, the volume control responds normally. However, once I enter the program guide, or VOD, or select the DVR, response to commands from the remote works fine for a while, then the response completely stops, similar to when a PC stops responding to mouse or keyboard commands. It seems like the STB's on-board microprocessor or RAM are suddenly max'd out. If I let it sit there for a long time (e.g., about 10 minutes), response to the remote control is back to normal. Alternately, if I power the TV and STB off and on again, responsiveness to the remote control is normal (until I again try to use the Guide, VOD, or DVR). I have put fresh batteries in the remote, but the problem remains the same. Any ideas on how to fix this? Thanks.

Please call 1-888-553-1555. The tech will have to send some commands to the stb to refresh it. Please mention exactly the things you typed here.

Similar Messages

SQL Slow Response from remote DB

I have two sites of which I am executing SQL querys and updates to an Oracle DB. Both sites have the identical code. I am querying against an Oracle 9.0.2 DB. I have tried using both the 8i JDBC Driver and the 9i JDBC Driver. At one site which is closer to the DB site the response is 10 times as fast as the response from my second site. I've had the network administrators to test the network between sites for packet latency. The results were 40ms to pass packets between sites. Traceroute also showed the same response times. I have employed Oracle's assistance with tuning the database optimally. This has not improve the response time. I thought that the problem might be with my SQL so I created the following simple test and the response times were the same. Any thoughts as to were the problem might lie? Your help is much appreciated.
Site 1 response time: 4ms
Site 2 response time: 137ms
CODE:
try{
Class.forName("oracle.jdbc.driver.OracleDriver");
con=DriverManager.getConnection(url,name,pw);
if(con!=null){
System.out.println("Got Connection");
Statement s = con.createStatement();
long begintime = System.currentTimeMillis();
int bt = (int)begintime;
ResultSet rs = s.executeQuery("select sysdate from dual");
long endtime = System.currentTimeMillis();
int et = (int)endtime;
rs.next();
Time t = rs.getTime("sysdate");
System.out.println("Time: " + t.toString());
System.out.println("Time to Retrieve Records: "+ (endtime - begintime) + "ms");
rs.close();
con.close();
catch(SQLException sql){
System.err.println("SQL Error: " + sql.getMessage());
sql.printStackTrace();
catch(ClassNotFoundException cnfe){
System.err.println("SQL Error: " + cnfe.getMessage());

If it was me I would write a client server socket tester and run it on both machines. And do some tests that run individual and burst transmissions throughout the day. You could do the same thing without code by manually FTP'ing some large files between the systems. But that will have more of a real impact on the system however.
A simple trace route is only going to show a problem if it exists at a particular point in time.

Remote Control and error 1456

We are having a Remote control issue with more and more PC's. If they are
logged in, we can remote control them. If they have bee restarted and are
waiting to log in, then we can not remote control them. We Can use
diagnostics on them though....
Zen 4.01 ir7 is where we are.
We are also having an issue where many times after imaging, the ISD is not
populated into windows, and gets associated with our Image PC's workstation
object. If we clear the ISD, delete both workstation objects, and reboot the
target PC, it does re-import correctly. The remote control issue does not
get fixed when this happens though....
I have seen that rmerrorlog.txt has been asked for in the past to help solve
this issue, so We are including that. Any help in resolving what we have set
wrong is appreciated.
Thanks,
Mark Waters, CNA
John Evans, MCNE
Systems Group
Housing and Food Services
Michigan State University
watersmd at mail dot hfs dot msu dot edu
1st attempt to remote control target PC was not Logged in. It Failed - Error
1456.
2nd attempt was when target PC was logged in. It Worked.
PC with ConsoleOne - A004686
#(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Starting console
#(89212)# 11:45:46 AM 02/13/07 Normal : ZenGetLangValueFromNWLanguage:
Trying to load the resource DLL from Nls\ENGLISH directory
#(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Resource is loaded
successfully
#(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Inside
LoadandParseCommand
#(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > AppData.bSessionRestart ==
FALSE Hiding window
#(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > Command line parameters
parsed successfully
#(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > Init Client
Successfull!!!
#(89212)# 11:45:46 AM 02/13/07 NORMAL : Before Authentication
#(89212)# 11:45:47 AM 02/13/07 NORMAL : After Authentication
#(89212)# 11:45:47 AM 02/13/07 CRITICAL : Authentication Failed:
#(89212)# 11:45:51 AM 02/13/07 CRITICAL : CONSOLE > LoadAndAuthenticate
returned FALSE
#(89212)# 11:45:51 AM 02/13/07 CRITICAL : CONSOLE > Authentication Failed:
returning -201
#(89212)# 11:45:51 AM 02/13/07 NORMAL : Out of process
#(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Starting console
#(89212)# 11:47:03 AM 02/13/07 Normal : ZenGetLangValueFromNWLanguage:
Trying to load the resource DLL from Nls\ENGLISH directory
#(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Resource is loaded
successfully
#(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Inside
LoadandParseCommand
#(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > AppData.bSessionRestart ==
FALSE Hiding window
#(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > Command line parameters
parsed successfully
#(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > Init Client
Successfull!!!
#(89212)# 11:47:03 AM 02/13/07 NORMAL : Before Authentication
#(89212)# 11:47:04 AM 02/13/07 NORMAL : After Authentication
#(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Authentication
Successful!!!
#(89212)# 11:47:04 AM 02/13/07 Normal : CONSOLE > Initialize returned TRUE
#(89212)# 11:47:04 AM 02/13/07 NORMAL : RTT > Avg Delay is 0
#(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Sent out WallPaperRequest
#(89212)# 11:47:04 AM 02/13/07 Normal : CONSOLE > Send Thread : Received
Startreceiving event
#(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Receive Thread : Received
Startreceiving Event
#(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Received CMD_AGENT_READY
Command
#(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Compression sending is 6
#(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Value of did->DrishtiType
sent to Agent is 1
#(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Sent out the DisplayInfo
Packet succesfully
#(89212)# 11:47:06 AM 02/13/07 Critical : HandlePacket >>Memory
reallocation
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > LookForTerminate got an
event
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > out of SendThread
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Value returned from the
ReceiveData(For Header) is -1
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > out of StartReceiveThread
#(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of process
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Receive thread terminated
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Send thread terminated
#(89212)# 11:47:13 AM 02/13/07 NORMAL : out of Startsession
#(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of startsession :
HandleRCSession
#(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of DeInit
#(89212)# 11:47:13 AM 02/13/07 NORMAL : out of HandleRCSession
Target PC - A003514
#(768)# 11:45:46 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenLite.dll
#(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenPol32.dll
#(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Successfully loaded
dependent modules...
#(768)# 11:45:47 AM 02/13/07 Normal : LoadZenAutilLibraryAndGetProc:
Successfully loaded ZenAutil.dll and its dependent DLLs
#(768)# 11:45:47 AM 02/13/07 Normal : Console version is SP1
#(768)# 11:45:47 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'A003514.Workstations.UHsg.HFS'
#(768)# 11:45:47 AM 02/13/07 Normal : Workstation is registered
#(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Attempting to read
policies...
#(768)# 11:45:47 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'A003514.Workstations.UHsg.HFS'
#(768)# 11:45:47 AM 02/13/07 Normal : Workstation is registered
#(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
A003514.Workstations.UHsg.HFS, treename - HFS
#(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
authenticated...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
failed...
#(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
A003514.Workstations.UHsg.HFS, treename - HFS
#(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
authenticated...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
failed...
#(768)# 11:45:47 AM 02/13/07 Normal : Neither policy settings active. All
operations disabled.
#(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Finished reading policies
#(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
A003514.Workstations.UHsg.HFS, treename - HFS
#(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
authenticated...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
failed...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: readVerifyInformation:
initializeContext() failed for master 0, tree:HFS
#(768)# 11:45:47 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
authentication for nearest replica returned : -201
#(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
A003514.Workstations.UHsg.HFS, treename - HFS
#(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
authenticated...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
failed...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: readVerifyInformation:
initializeContext() failed for master 1, tree:HFS
#(768)# 11:45:47 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
authentication for master replica returned : -201
#(768)# 11:45:47 AM 02/13/07 Critical : Unable to reach the eDirectory
server
#(768)# 11:45:47 AM 02/13/07 Critical :
RMAudit::Auditing.cpp:recordAuditLog() The audit record is corrupted.
#(768)# 11:45:47 AM 02/13/07 Normal : RMSessionFinished - Begin
#(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Unloaded modules...
#(768)# 11:45:47 AM 02/13/07 Normal : UnLoadZenAutilLibrary :Successfully
unloaded ZenAutil.dll
#(768)# 11:47:02 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenLite.dll
#(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenPol32.dll
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully loaded
dependent modules...
#(768)# 11:47:03 AM 02/13/07 Normal : LoadZenAutilLibraryAndGetProc:
Successfully loaded ZenAutil.dll and its dependent DLLs
#(768)# 11:47:03 AM 02/13/07 Normal : Console version is SP1
#(768)# 11:47:03 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'CN=A003514.OU=Workstations.OU=UHsg.O=HFS'
#(768)# 11:47:03 AM 02/13/07 Normal : Workstation is registered
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Attempting to read
policies...
#(768)# 11:47:03 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'CN=A003514.OU=Workstations.OU=UHsg.O=HFS'
#(768)# 11:47:03 AM 02/13/07 Normal : Workstation is registered
#(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
#(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
successfully
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
context
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Failure in reading boolean
attribute DM:Ignore Policy in CN=A003514.OU=Workstations.OU=UHsg.O=HFS
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Attempt to read using
user:, tree:HFS
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Workstation Policy -
'z_Global Workstation Package:General:Remote Control
Policy.WorkstationPackages.Workstations.UHsg.HFS'
#(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
#(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
successfully
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
context
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: User Policy - ''
#(768)# 11:47:03 AM 02/13/07 Normal : Only workstation policy settings
active...
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Finished reading policies
#(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
#(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
successfully
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
context
#(768)# 11:47:03 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
authentication for nearest replica returned : 0
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Unloaded modules...
#(768)# 11:47:03 AM 02/13/07 Normal : UnLoadZenAutilLibrary :Successfully
unloaded ZenAutil.dll
#(768)# 11:47:03 AM 02/13/07 Normal : LaunchRcRvAgent: CalculateRTT is
over...
#(768)# 11:47:04 AM 02/13/07 Normal : Darapan is loaded successfully
#(768)# 11:47:04 AM 02/13/07 Normal : Init Proc of RCAgent has been called
successfully
#(768)# 11:47:04 AM 02/13/07 Critical : Successfully executed RcAgent.DLL's
Init Proc Address
#(768)# 11:47:04 AM 02/13/07 Normal : Call to update desktop is made
#(768)# 11:47:04 AM 02/13/07 normal : CMD_AGENT_READY is sent
#(768)# 11:47:04 AM 02/13/07 normal : CMD_SUPRESS_WALLPAPER is received
#(768)# 11:47:04 AM 02/13/07 Normal : WallPaperThread is closed
#(768)# 11:47:04 AM 02/13/07 Normal : CMD_KEY_MASK is received
#(768)# 11:47:04 AM 02/13/07 normal : CMD_DISPLAY_INFO is received
#(768)# 11:47:04 AM 02/13/07 Normal : Display Info. received. Remote Control
session for P1.
#(768)# 11:47:04 AM 02/13/07 Normal : Console version is SP1
#(768)# 11:47:04 AM 02/13/07 Normal : Calling startlookforchangesthread.
#(768)# 11:47:04 AM 02/13/07 Normal : InitialDisplayInfo sent
#(768)# 11:47:04 AM 02/13/07 Normal : DRIVER to use is DARPAN
#(768)# 11:47:04 AM 02/13/07 Normal : CallInitDrishti :
ESC_START_VIEWING_DARPAN Successful
#(768)# 11:47:04 AM 02/13/07 Normal : Came out after loading the driver
#(768)# 11:47:04 AM 02/13/07 normal : Setting hook to cursor shapes is ok
#(768)# 11:47:04 AM 02/13/07 Normal : Got WM_SWITCH_DESKTOP
#(768)# 11:47:05 AM 02/13/07 Normal : Call to update desktop is made
#(768)# 11:47:12 AM 02/13/07 Normal : RecvThread is returning
#(768)# 11:47:12 AM 02/13/07 Normal : WaitThread : WaitForMultipleObjects
returned. Closed thread is = 1
#(768)# 11:47:12 AM 02/13/07 Normal : Periodic Check thread is returning
#(768)# 11:47:12 AM 02/13/07 Normal : In desktop change thread terminate
session is set
#(768)# 11:47:12 AM 02/13/07 normal : Terminate session event is set in send
thread
#(768)# 11:47:12 AM 02/13/07 Normal : Close msg for visible window. Calling
CloseConnection().
#(768)# 11:47:12 AM 02/13/07 Normal : Clean up is going to start
#(768)# 11:47:12 AM 02/13/07 Normal : LookforchangesThread returning
#(768)# 11:47:12 AM 02/13/07 Normal : WallPaperThread is closed
#(768)# 11:47:12 AM 02/13/07 normal : All the threads are closed normally
#(768)# 11:47:12 AM 02/13/07 Normal : Call to update desktop is made
#(768)# 11:47:12 AM 02/13/07 normal : RC session is completed successfully
#(768)# 11:47:12 AM 02/13/07 Normal : CZenRmServer::RCRvThread:
hAcceptThread Signals
#(768)# 11:47:12 AM 02/13/07 Critical :
RMAudit::Auditing.cpp:recordAuditLog() The audit record is corrupted.
#(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: RcAgent.dll is
successfully unloaded from memory
#(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: Ict_Uc.dll is not unloaded
from memory ...
#(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: Ict_Uc.dll is not unloaded
from memory and it is forcefully unloaded...
#(768)# 11:47:12 AM 02/13/07 Normal : Darapan is Unloaded successfully
#(768)# 11:47:12 AM 02/13/07 Normal : RMSessionFinished - Begin

Delete a few test workstation objects. Delete the object that was created by
the Image PC. Run DSREPAIR. Disable windows firewall. Reboot the PCs. Check
if the Workstation objects are created and if you can remotely control
them.
"Mark Waters" <[email protected]> wrote in message
news:[email protected]...
> We are having a Remote control issue with more and more PC's. If they are
> logged in, we can remote control them. If they have bee restarted and are
> waiting to log in, then we can not remote control them. We Can use
> diagnostics on them though....
> Zen 4.01 ir7 is where we are.
> We are also having an issue where many times after imaging, the ISD is not
> populated into windows, and gets associated with our Image PC's
> workstation
> object. If we clear the ISD, delete both workstation objects, and reboot
> the
> target PC, it does re-import correctly. The remote control issue does not
> get fixed when this happens though....
> I have seen that rmerrorlog.txt has been asked for in the past to help
> solve
> this issue, so We are including that. Any help in resolving what we have
> set
> wrong is appreciated.
>
> Thanks,
> Mark Waters, CNA
> John Evans, MCNE
> Systems Group
> Housing and Food Services
> Michigan State University
> watersmd at mail dot hfs dot msu dot edu
>
>
> 1st attempt to remote control target PC was not Logged in. It Failed -
> Error
> 1456.
> 2nd attempt was when target PC was logged in. It Worked.
>
>
> PC with ConsoleOne - A004686
>
> #(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Starting console
> #(89212)# 11:45:46 AM 02/13/07 Normal : ZenGetLangValueFromNWLanguage:
> Trying to load the resource DLL from Nls\ENGLISH directory
> #(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Resource is loaded
> successfully
> #(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Inside
> LoadandParseCommand
> #(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > AppData.bSessionRestart
> ==
> FALSE Hiding window
> #(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > Command line parameters
> parsed successfully
> #(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > Init Client
> Successfull!!!
> #(89212)# 11:45:46 AM 02/13/07 NORMAL : Before Authentication
> #(89212)# 11:45:47 AM 02/13/07 NORMAL : After Authentication
> #(89212)# 11:45:47 AM 02/13/07 CRITICAL : Authentication Failed:
> #(89212)# 11:45:51 AM 02/13/07 CRITICAL : CONSOLE > LoadAndAuthenticate
> returned FALSE
> #(89212)# 11:45:51 AM 02/13/07 CRITICAL : CONSOLE > Authentication Failed:
> returning -201
> #(89212)# 11:45:51 AM 02/13/07 NORMAL : Out of process
>
>
>
> #(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Starting console
> #(89212)# 11:47:03 AM 02/13/07 Normal : ZenGetLangValueFromNWLanguage:
> Trying to load the resource DLL from Nls\ENGLISH directory
> #(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Resource is loaded
> successfully
> #(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Inside
> LoadandParseCommand
> #(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > AppData.bSessionRestart
> ==
> FALSE Hiding window
> #(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > Command line parameters
> parsed successfully
> #(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > Init Client
> Successfull!!!
> #(89212)# 11:47:03 AM 02/13/07 NORMAL : Before Authentication
> #(89212)# 11:47:04 AM 02/13/07 NORMAL : After Authentication
> #(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Authentication
> Successful!!!
> #(89212)# 11:47:04 AM 02/13/07 Normal : CONSOLE > Initialize returned TRUE
> #(89212)# 11:47:04 AM 02/13/07 NORMAL : RTT > Avg Delay is 0
> #(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Sent out
> WallPaperRequest
> #(89212)# 11:47:04 AM 02/13/07 Normal : CONSOLE > Send Thread : Received
> Startreceiving event
> #(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Receive Thread :
> Received
> Startreceiving Event
> #(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Received CMD_AGENT_READY
> Command
> #(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Compression sending is 6
> #(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Value of
> did->DrishtiType
> sent to Agent is 1
> #(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Sent out the DisplayInfo
> Packet succesfully
> #(89212)# 11:47:06 AM 02/13/07 Critical : HandlePacket >>Memory
> reallocation
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > LookForTerminate got an
> event
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > out of SendThread
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Value returned from the
> ReceiveData(For Header) is -1
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > out of
> StartReceiveThread
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of process
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Receive thread
> terminated
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Send thread terminated
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : out of Startsession
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of startsession :
> HandleRCSession
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of DeInit
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : out of HandleRCSession
>
>
> Target PC - A003514
>
> #(768)# 11:45:46 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\ZenLite.dll
> #(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\ZenPol32.dll
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Successfully loaded
> dependent modules...
> #(768)# 11:45:47 AM 02/13/07 Normal : LoadZenAutilLibraryAndGetProc:
> Successfully loaded ZenAutil.dll and its dependent DLLs
> #(768)# 11:45:47 AM 02/13/07 Normal : Console version is SP1
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
> wsDN = 'A003514.Workstations.UHsg.HFS'
> #(768)# 11:45:47 AM 02/13/07 Normal : Workstation is registered
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Attempting to read
> policies...
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
> wsDN = 'A003514.Workstations.UHsg.HFS'
> #(768)# 11:45:47 AM 02/13/07 Normal : Workstation is registered
> #(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
> A003514.Workstations.UHsg.HFS, treename - HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
> authenticated...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
> failed...
> #(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
> A003514.Workstations.UHsg.HFS, treename - HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
> authenticated...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
> failed...
> #(768)# 11:45:47 AM 02/13/07 Normal : Neither policy settings active. All
> operations disabled.
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Finished reading
> policies
> #(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
> A003514.Workstations.UHsg.HFS, treename - HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
> authenticated...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
> failed...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: readVerifyInformation:
> initializeContext() failed for master 0, tree:HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
> authentication for nearest replica returned : -201
> #(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
> A003514.Workstations.UHsg.HFS, treename - HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
> authenticated...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
> failed...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: readVerifyInformation:
> initializeContext() failed for master 1, tree:HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
> authentication for master replica returned : -201
> #(768)# 11:45:47 AM 02/13/07 Critical : Unable to reach the eDirectory
> server
> #(768)# 11:45:47 AM 02/13/07 Critical :
> RMAudit::Auditing.cpp:recordAuditLog() The audit record is corrupted.
> #(768)# 11:45:47 AM 02/13/07 Normal : RMSessionFinished - Begin
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Unloaded modules...
> #(768)# 11:45:47 AM 02/13/07 Normal : UnLoadZenAutilLibrary :Successfully
> unloaded ZenAutil.dll
>
>
> #(768)# 11:47:02 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\ZenLite.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\ZenPol32.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully loaded
> dependent modules...
> #(768)# 11:47:03 AM 02/13/07 Normal : LoadZenAutilLibraryAndGetProc:
> Successfully loaded ZenAutil.dll and its dependent DLLs
> #(768)# 11:47:03 AM 02/13/07 Normal : Console version is SP1
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
> wsDN = 'CN=A003514.OU=Workstations.OU=UHsg.O=HFS'
> #(768)# 11:47:03 AM 02/13/07 Normal : Workstation is registered
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Attempting to read
> policies...
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
> wsDN = 'CN=A003514.OU=Workstations.OU=UHsg.O=HFS'
> #(768)# 11:47:03 AM 02/13/07 Normal : Workstation is registered
> #(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
> CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
> #(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
> successfully
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
> context
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Failure in reading
> boolean
> attribute DM:Ignore Policy in CN=A003514.OU=Workstations.OU=UHsg.O=HFS
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Attempt to read using
> user:, tree:HFS
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Workstation Policy -
> 'z_Global Workstation Package:General:Remote Control
> Policy.WorkstationPackages.Workstations.UHsg.HFS'
> #(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
> CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
> #(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
> successfully
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
> context
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: User Policy - ''
> #(768)# 11:47:03 AM 02/13/07 Normal : Only workstation policy settings
> active...
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Finished reading
> policies
> #(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
> CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
> #(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
> successfully
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
> context
> #(768)# 11:47:03 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
> authentication for nearest replica returned : 0
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Unloaded modules...
> #(768)# 11:47:03 AM 02/13/07 Normal : UnLoadZenAutilLibrary :Successfully
> unloaded ZenAutil.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : LaunchRcRvAgent: CalculateRTT is
> over...
> #(768)# 11:47:04 AM 02/13/07 Normal : Darapan is loaded successfully
> #(768)# 11:47:04 AM 02/13/07 Normal : Init Proc of RCAgent has been called
> successfully
> #(768)# 11:47:04 AM 02/13/07 Critical : Successfully executed
> RcAgent.DLL's
> Init Proc Address
> #(768)# 11:47:04 AM 02/13/07 Normal : Call to update desktop is made
> #(768)# 11:47:04 AM 02/13/07 normal : CMD_AGENT_READY is sent
> #(768)# 11:47:04 AM 02/13/07 normal : CMD_SUPRESS_WALLPAPER is received
> #(768)# 11:47:04 AM 02/13/07 Normal : WallPaperThread is closed
> #(768)# 11:47:04 AM 02/13/07 Normal : CMD_KEY_MASK is received
> #(768)# 11:47:04 AM 02/13/07 normal : CMD_DISPLAY_INFO is received
> #(768)# 11:47:04 AM 02/13/07 Normal : Display Info. received. Remote
> Control
> session for P1.
> #(768)# 11:47:04 AM 02/13/07 Normal : Console version is SP1
> #(768)# 11:47:04 AM 02/13/07 Normal : Calling startlookforchangesthread.
> #(768)# 11:47:04 AM 02/13/07 Normal : InitialDisplayInfo sent
> #(768)# 11:47:04 AM 02/13/07 Normal : DRIVER to use is DARPAN
> #(768)# 11:47:04 AM 02/13/07 Normal : CallInitDrishti :
> ESC_START_VIEWING_DARPAN Successful
> #(768)# 11:47:04 AM 02/13/07 Normal : Came out after loading the driver
> #(768)# 11:47:04 AM 02/13/07 normal : Setting hook to cursor shapes is ok
> #(768)# 11:47:04 AM 02/13/07 Normal : Got WM_SWITCH_DESKTOP
> #(768)# 11:47:05 AM 02/13/07 Normal : Call to update desktop is made
> #(768)# 11:47:12 AM 02/13/07 Normal : RecvThread is returning
> #(768)# 11:47:12 AM 02/13/07 Normal : WaitThread : WaitForMultipleObjects
> returned. Closed thread is = 1
> #(768)# 11:47:12 AM 02/13/07 Normal : Periodic Check thread is returning
> #(768)# 11:47:12 AM 02/13/07 Normal : In desktop change thread terminate
> session is set
> #(768)# 11:47:12 AM 02/13/07 normal : Terminate session event is set in
> send
> thread
> #(768)# 11:47:12 AM 02/13/07 Normal : Close msg for visible window.
> Calling
> CloseConnection().
> #(768)# 11:47:12 AM 02/13/07 Normal : Clean up is going to start
> #(768)# 11:47:12 AM 02/13/07 Normal : LookforchangesThread returning
> #(768)# 11:47:12 AM 02/13/07 Normal : WallPaperThread is closed
> #(768)# 11:47:12 AM 02/13/07 normal : All the threads are closed normally
> #(768)# 11:47:12 AM 02/13/07 Normal : Call to update desktop is made
> #(768)# 11:47:12 AM 02/13/07 normal : RC session is completed successfully
> #(768)# 11:47:12 AM 02/13/07 Normal : CZenRmServer::RCRvThread:
> hAcceptThread Signals
> #(768)# 11:47:12 AM 02/13/07 Critical :
> RMAudit::Auditing.cpp:recordAuditLog() The audit record is corrupted.
> #(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: RcAgent.dll is
> successfully unloaded from memory
> #(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: Ict_Uc.dll is not
> unloaded
> from memory ...
> #(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: Ict_Uc.dll is not
> unloaded
> from memory and it is forcefully unloaded...
> #(768)# 11:47:12 AM 02/13/07 Normal : Darapan is Unloaded successfully
> #(768)# 11:47:12 AM 02/13/07 Normal : RMSessionFinished - Begin
>

Remote control stops working after a few days

NW 6 SP3
ZFD 3.2 SP2
After importing workstations, remote control works fine. After a few
days, remote ping might work but NOT remote control. Sometimes even remote ping errors out with the message that the "REMOTE MANAGEMENT
AGENT
IS NOT RUNNING"(when it appears it is). If I stop and start the
"novell
wuser agent" service, then I can usually remote control the
workstation
again. Occasionally, however, I get the message "The Remote
Management
agent was unable to locate the workstation in NDS". At which point I
have
to delete the workstation object and re-import the workstation to be
able
to remote control it again.
Any help is appreciated.
Jeff

> [email protected]
>
> >
> > The login script is running wsreg32.exe with the /s parameter
> > pointing to the server servicing the import services.
>
> Is there a reason you are using this?
> instead of DNS, hosts, or registry?
>
> As I am wondering if maybe at times the workstation manager tries to
> registr, but can't find the server, even the wsreg is running.
> Normally onces the workstation has registered it doesn't need the
> address again, but if for whatever reason cannot find it's
workstation
> object it will need to resolve the import services.
>
> --
> Jared L Jennings, CNE
> Novell Support Forums SysOp.
> http://support.novell.com/forums/faq_nntp.html
>
> Posting with XanaNews Reader 1.15.8.2
> Geek by Nature, NetWare by Choice.
I have a different server for each site(city) hosting the import
services. There is only one variable allowed in DNS so all sites
would
try to get services and register to the same server.
Using the container login script for each site to set the /s parameter
was
easier than changing the registry setting for each
workstation...especially if that server changed. This way I would
only
have to change it one place.
If the workstation has already been registered and imported AND I can
remote control it, does it NEED to find the import server again if it
hasn't been rebooted since the last time I remote controlled it?
Thanks, jg

ZCM remote control on Windows 7 slow

Hi!
Well, ZCM 11.2.1, Windows 7. Noticed that Remote Control via ZCC is ... strangely slow when user is logged in. On CAD screen it's ok. Well, this is first W7 device in zone, haven't noticed such a thing on WXP.
Btw. Using Intel KVM (also VNC) ... it is much more quicker, well, sure, hardware based etc., but anyway.
Also, I use on my WXP device remote control soft from ZCM 10.x, maybe this the cause, not sure ZCM 11.x remote control soft does work with ZCM 10, I need them both running on my desktop as most of computers in ZCM 10 zone.
Any ideas?
More thanks, Alar.

Originally Posted by NovAlf
Hi!
Well, ZCM 11.2.1, Windows 7. Noticed that Remote Control via ZCC is ... strangely slow when user is logged in. On CAD screen it's ok. Well, this is first W7 device in zone, haven't noticed such a thing on WXP.
Btw. Using Intel KVM (also VNC) ... it is much more quicker, well, sure, hardware based etc., but anyway.
Also, I use on my WXP device remote control soft from ZCM 10.x, maybe this the cause, not sure ZCM 11.x remote control soft does work with ZCM 10, I need them both running on my desktop as most of computers in ZCM 10 zone.
Any ideas?
More thanks, Alar.
I'm not aware that you can use both versions of the Remote Management Plugin against two diff. Zones.
Perhaps that's the issue?
Do you have a pc that you can install JUST the ZCM 11.x remote management viewer and then try to remote control a ZCM 11.x agent?

After upgrading to 10.7.2, my iMac works fine for 40-50 minutes, then slows to a crawl. Restart gets back to normal, then 40 minutes later need to restart again. Thought about reinstalling Lion through Lion Recovery, but says my hard disk is locked?

After upgrading to 10.7.2, my iMac works fine for 40-50 minutes, then slows to a crawl. Restart gets back to normal, then 40 minutes later need to restart again. Thought about reinstalling Lion through Lion Recovery, but won't let me, says my hard disk is locked? Any suggestions?

Launch the Terminal app in /Utilities/, run these two commands (copy & paste each one separately and hit the return key):
sudo chflags 0 /volumes/*
sudo chmod a+rx /volumes/*
at the Password: prompt, type in your admin password, carefully since nothing displays on the screen, and hit the return key. These should unlock your drives. You might have to restart.

Satellite Pro A100 - Resume from Sleep with IR multimedia remote control or keyboard

Hi Guys
I have dedicated my Satellite Pro A100 to be a media center that sits under the TV and can play networked media and DVD's etc.
This is using Vista.
The set up I want is that the lid is shut 24/7 365 and when I want to use it I just press "SLEEP" or power button from the remote control or keyboard and it fires up ready for action.
POINT TO NOTE. I successfully did this with my OLD Tecra M3. However was too slow for media center and vista
However I have set the power settings as I want etc, shut lid do nothing, and enabled hybrid sleep (preferred sleep).
Now I CAN put it to sleep with the multimedia keyboard or remote control. BUT can I wake it?...NO!. I have thought of everything possible....gone to device manager and made sure all the options for the remote and the keyboard and the USB reciever are set to WAKE FROM SLEEP. The only thing to wake it is the power button - which defeats the purpose of it being sat there like a dvd player.
when awake the remote and the keyboard function fine - I have made sure the batteries are recharged.
I have the latest BIOS and speaking of BIOS's there are no S3 power options I noticed , but then there werent on the M3 and that worked fine in terms of sleep and waking with the IR.
I come to the forum because although I know some older systems will not work with vista - IF the M3 will work - I am sure the twice as new and powerful A100 will.
Has anyone had this before - what have I missed it must be staring me in the face.
Thanks in advance.
P.S Also of late the touch pad has been playing up i.e the left and right clickers swap function so one second your working as normal next minute you left click and the right clikc menu appears. Reset BIOS - rebuilt - reinstalled synaptic - no difference.
When I worked in support for a big company when this started happening it wasnt good news - is it bad news?

Hi
Im not quite sure why it doesnt on your Sat Pro A100 and why it works on M3.
But fact is that Satellite Pro A100 doesnt support the FIR (Fast InfraRed) port and the
Tecra M3 supports the Fast InfraRed port.
Maybe this could be the reason why you cannot enable the notebook using the infrared multimedia remote control.
Greets

Remote control error 1891 after eDir upgrade?

- NW6sp3 two-node cluster (production server) houses read/write replica
- NW6sp3 utility server houses master replica and is a ZenWorks 4IR5 server
- The above servers reside in a small chunk of a much larger NDS tree
- Roughly 150 users with the 4.90sp2 client + Zen4IR5 agent
- ConsoleOne 1.3.6c with current Zen and Cluster snapins
Is there a known preferred method (or recommended method) of authenticating
to either read/write or master replica's? Here is my issue:
Prior to upgrading all three servers above to eDir 8.7.3.3, I was able to
use Zen to remote control my users's PC's. I WAS logging into the cluster
(read/write replica), just like all my users still do today. I began seeing
the remote control error "1891" which various TID's describe as an issue
with close proximity to a pure IPX server, and remote control fails. I have
no IPX running in my network currently. Opened tickets with Novell in both
their Zen and eDir teams.....no solution's yet. As I began banging around,
I found that if I force my login to the utility server (master repica in
this case) I now regain remote control ability to my users that authenticate
to the cluster (read/write). Also, if I intentionally login to a different
context of our tree (have a different admin create a temp account for me in
his context, say) first and not into my own context, I can remote control my
users in my context via ConsoleOne. Similarly, if I login to a different
context upon startup, then once the Windows desktop is loaded and I right
click the red N in my system tray, and login as myself into my own context,
I can remote control users. The issue arises when the first context I login
to is my own. Odd I say, odd.
I've done every flavor of dsrepair switches (-xk3, -a, timesync, etc) and
provided logs to Novell. Each dsrepair variant returns zero errors. I
believe the tree is healthy from what I and Novell can tell.
Attached are some logs from about a month ago when I started seeing these
remote control errors. Please note the time stamps on both the remote
controller and remote controlled machines.
I've posted this over on the eDir board as well since it feels like an
authentication issue to me....
Thanks for taking the time to look at this,
Mike
LOG AT CONSOLEONE MACHINE:
#(2884)# 11:45:47 AM 03/14/05 Normal : CONSOLE > Starting console
#(2884)# 11:45:47 AM 03/14/05 Normal : ZenGetLangValueFromNWLanguage: Trying
to load the resource DLL from Nls\ENGLISH directory
#(2884)# 11:45:47 AM 03/14/05 Normal : CONSOLE > Resource is loaded
successfully
#(2884)# 11:45:47 AM 03/14/05 Normal : CONSOLE > Inside LoadandParseCommand
#(2884)# 11:45:47 AM 03/14/05 NORMAL : CONSOLE > AppData.bSessionRestart ==
FALSE Hiding window
#(2884)# 11:45:47 AM 03/14/05 NORMAL : CONSOLE > Command line parameters
parsed successfully
#(2884)# 11:45:47 AM 03/14/05 NORMAL : Connection successful at port 1761
#(2884)# 11:45:47 AM 03/14/05 NORMAL : InitClientInLoop() successful
#(2884)# 11:45:47 AM 03/14/05 NORMAL : Before Authentication
#(2884)# 11:45:47 AM 03/14/05 NORMAL : After Authentication
#(2884)# 11:45:47 AM 03/14/05 CRITICAL : Authentication Failed:
#(2884)# 11:45:48 AM 03/14/05 CRITICAL : CONSOLE > LoadAndAuthenticate
returned FALSE
#(2884)# 11:45:48 AM 03/14/05 CRITICAL : CONSOLE > Authentication Failed:
returning -1111
#(2884)# 11:45:48 AM 03/14/05 NORMAL : Out of process
LOG AT MACHINE ON FAR END OF REMOTE LINK:
RMErrorLog0.txt
#(1484)# 11:45:48 AM 03/14/05 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenPol32.dll
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Successfully loaded
dependent modules...
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'CN=C0000CC22.OU=WKST.OU=EAG.OU=CO.OU=NW.O=CTL'
#(1484)# 11:45:48 AM 03/14/05 Normal : Workstation is registered
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Attempting to read
policies...
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'CN=C0000CC22.OU=WKST.OU=EAG.OU=CO.OU=NW.O=CTL'
#(1484)# 11:45:48 AM 03/14/05 Normal : Workstation is registered
#(1484)# 11:45:48 AM 03/14/05 Normal : Reading workstation DN and tree
name...
#(1484)# 11:45:48 AM 03/14/05 Normal : workstation DN -
CN=C0000CC22.OU=WKST.OU=EAG.OU=CO.OU=NW.O=CTL, treename - CENTURYTEL
#(1484)# 11:45:48 AM 03/14/05 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(1484)# 11:45:48 AM 03/14/05 Normal : Workstation IS authenticated...
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
successfully
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Successfully initialized
context
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Failure in reading
boolean attribute DM:Ignore Policy in
CN=C0000CC22.OU=WKST.OU=EAG.OU=CO.OU=NW.O=CTL
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Attempt to read using
user:, tree:CENTURYTEL
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Workstation Policy -
'EAG-WP:General:Remote Control Policy.EAG.CO.NW.CTL'
#(1484)# 11:45:48 AM 03/14/05 Normal : Reading workstation DN and tree
name...
#(1484)# 11:45:48 AM 03/14/05 Normal : workstation DN -
CN=C0000CC22.OU=WKST.OU=EAG.OU=CO.OU=NW.O=CTL, treename - CENTURYTEL
#(1484)# 11:45:48 AM 03/14/05 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(1484)# 11:45:48 AM 03/14/05 Normal : Workstation IS authenticated...
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
successfully
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Successfully initialized
context
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Failure in reading
boolean attribute DM:Ignore Policy in CN=TSUVMCW.OU=EAG.OU=CO.OU=NW.O=CTL
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Attempt to read using
user:CN=TSUVMCW.OU=EAG.OU=CO.OU=NW.O=CTL, tree:CENTURYTEL
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: User Policy - ''
#(1484)# 11:45:48 AM 03/14/05 Normal : Only workstation policy settings
active...
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Finished reading policies
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Unloaded modules...

Mike,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Unplugging all network devices from Fios router prevents DVR freezing and remote control lock ups.

All,
I recently had a Verizon tech visit my house due to constant DVR and remote control freezing. TV content was freezing whether it was locally recorded, pulled from another DVR in the house, or On Demand. On a hunch after the tech tested everything and was about to leave, he unplugged my gigabit switch from the Fios router. Lo and behold everything started running perfectly. Since to the tech, the problem was solved, he closed the case and was on his way. The probem is of course I have more devices than the built in router switch provides ports for. My network is compised of an 8 port Netgear gigabit switch downstream from the Fios router with two wireless access points (with their own built in gigbait switches) connecting to the Netgear gigabit switch. There are no loops in the switch topology. I've tried changing out the router, the gigabit switch, removing the wireless acces points individually as well as plugging the access points directly into the Fios router switch (one at a time with no Netgear switch in the middle) and all scenarious cause the DVR/remote control freeezing to come back. The only devices I can plug into the Fios router without causing freezes are PC's....anything with it's own switch essentially brings the network to it's knees. If anyone has an idea how to get my network back in one piece AND make the DVR's/remotes behave, I'd greatly appreciate the help!
My Fios equipment:
MI-424WR GEN-3I rev I (eye) running firmware 40.19.36
5 Motorola HD-DVRs all QIP 7232-2 running software release 1.9.1 platform build 25.39 (Oct. 22, 2012)
Specific config:
75/35 Fios connecting via ethernet from ONT. Set-top boxes connect to Fios router coax port via powered splitter.
*All SNR/dB mesasurements taken by the tech from the set-top boxes and router are well within spec.
Fios router provides DHCP addressing. Wireless N access points are configured for roaming with the same SSID and non-overlapping channels. Access points are not providing routing or IP adressing...all layer 3 and up services still provided by Fios router
Diagram:
ONT
|
Fios Router ---------Cable Splitter---------Set Top Boxes
|
Netgear Switch
|           |
WAP1    WAP2

WayfarerII wrote:
... DVR ... remote ... freezing ... TV ... whether ... locally recorded, pulled from another DVR ...
... tech ... unplugged my gigabit switch from the Fios router ... and ... everything started running perfectly ...
... config:
75/35 Fios ... via ethernet from ONT ... Set-top boxes connect to Fios router via powered splitter ...
ONT
|
| cat5
|
Fios Router ---------Cable Splitter---------Set Top Boxes
|
Netgear Switch
|           |
WAP1    WAP2
I am inclined to echo several of the "tns" comments, particularly with respect to your splitter. My layout is based on a standard 8-port splitter of the type usually supplied in a VZ install. In addition I do have a ChannelPlus device that functions as a powered splitter, but its use is limited to distribution of secondary TV signals to older analog TVs. My first point then is that this may be an offender as "tns" has suggested.
In addition, I'd describe your wiring as "non-standard" (red-colored items in the above diagram)  As you're no doubt aware, with 75/35 you don't really need Cat5e from the ONT (your original diagram). It seems the highest tiers do require it, but in "standard" installations this run is coax directly to an 8-port non-powered splitter (below diagram), then from that splitter via coax to all STBs and CableCards, other TVs, et.), and also to the Actiontec.   Subsequent feeds from the Actiontec to wired devices (including WAPs) are via Ethernet (typically Cat 5e).
In fact I don't immediately see how your STBs get additional services such as On Demand and IMG with the wiring shown in your diagram (perhaps someone can help me out here). In "standard" installs the Actiontec must be connected via coax to the ONT to provide such services to other network clients. I don't see that requirement being met here.
For starters I'd recommend that you change your service from WAN Ethernet to WAN coax. This can easily be accomplished over the telephone. Then I'd run coax directly from the ONT to the Actiontec as in my revised diagram below (blue-colored items). If your setup can manage with this arrangement, I think it will help greatly with the "freezing" issue.
ONT - - - - - - coax - - - - -
                                         |
Fios Router --- coax--- Standard 8-Port Splitter --- coax --- Set Top Boxes
|cat5
Netgear Switch
|cat5          |cat5
WAP1 WAP2
Subsequent Note: You provided additional info while I was composing a response, and I'd like to offer another comment. Structured wiring "panels" of the type usually available are pre-configured to provide data, phone and video. This usually means that one is in certain respects limited by the ideas of the panel designer. I have what can be called a structured wiring layout, but it really is composed of individual small custom networks for each service (automation, security, video, data, telco, etc.), configured so that all wiring terminates in "home run" fashion at a central panel (a few details here: http://forums.verizon.com/t5/Home-Networking/Cmon-Show-Us-Your-Network/m-p/481733#M765 ). This layout makes it easier to make adjustments (and there have been quite a few over the intervening years). I'm thinking that in your case you may have to abandon the powered splitter (presumably) built into the panel in order to avoid your present fix.
Subsequent Subsequent Note:   From your description it seems that you are using more than a single "whole house" DVR to supply programming to other devices. This is a bit puzzling to me because somewhere along the line I recall reading that only a single whole house DVR was allowed on the network. Can you elaborate a bit?

BT Vision Box and Remote Control not working prope...

Hi,
Can anybody help me please?
I have a black BT Vision Box. The remote control had increasingly been sticking so tonight I just turned the power off tonight, left it off for 20 seconds and turned it back on.
It seemed to turn back on and reboot itself normally, it took the amount of time it normally does on a couple of occasions when it froze a few months back. However since I rebooted it approximately 3 hours ago it has been turning itself off and rebooting itself every 10 minutes or so. On one occasion when I turned it off on the front of the machine and left it for a few minutes, it turned itself on and started rebooting itself again.
The remote control is worse than when it was sticking, now there is a delay of up to 30 seconds after I press a button. Sometimes it does not work at all, when that happens it just becomes stuck and eventually reboots itself.
So far I have tried turning it off and on again, I have also tried rebooting the internet connection (which is working fine). I have tried pressing the off button on the actual box for 10 seconds and resetting it that way. I have put new batteries in the remote. Nothing has worked. If anyone can help me that would be great.
Solved!
Go to Solution.

Hi,
Unfortunately I can't get that far now.
I turned all TV related systems off last night in an effort to see if it would work properly today.
I came home from work and turned everything on. The system boots itself up until it gets to a grey screen that says "Nearly there..." with the BT logo in the bottom right corner. It stays like that for approximately one minute. Then it turns itself off and starts rebooting itself again.
I have tried pressing the on/off button on the front of the box and holding it in for 10 secs or so until the box turns itself off and reboots but the effect is still the same as above.
Do you have any other suggestions pleaase, aside from throwing it in the bin?

Creative Megaworks 250D 2.1 THX: How can I find a new remote control & spare satellite(s)?

Hi all,
For years, we have owned and used one remarkable speaker set from Creative:
The Creative Megaworks (Cambridge Soundworks) 250D 2.1 THX-certified speakers!
I have no complaints. The sound this small 2.1 set produces is amazing! The 300 watts (RMS) power can shake the whole house - x50W + 2x75W are more than enough! Movies, music, games, everything sounds great - bass is deep and clear, mid-range is good, high frequences are clear! There's no noise and no distortion (I have connected the system to an SPDIF digital connector on my sound card), the Signal-to-Noise ratio is 99 dB, and the frequency response of the set is extremely good, too!
But I have a problem, now. We have broken, by accident, one of the satellites. Now I have only one satellite, and the bass/amplifier with the remote control... Looks like a . system... ;-)
This system was a present for us. Maybe we were lucky, but I am very happy with the build quality of this Creative spaker set. Until we have broken one of the satellites ourselves, yesterday, everything was OK, and the sound it produced was amazing all these years...
I tried to contact a Creative representative, asking if we can maybe order one (or two) spare satellites fot this set, but the only reply (up to now) was:
"You are out of warranty period. Buy a new speaker set."
Well, we could, I guess...
But:
First: Creative does not have (at present) a similar model, 2.1, THX certified, with digital (SPDIF input), 300W+ RMS, 99 dB Signal-to-Noise.
Second, to throw away such an amazing set just because there's one satellite broken? That would be such pity! :-(
I'd like to buy one (or two) new 250D satellites. I was thinking even that, in the worst case, I can maybe try to order 2 satellites from a Creative Gigaworks S750 set. They have very similar characteristics, 70W rms power, 8 ohms, so maybe this'll work. I was trying to check today if two satellites can be ordered, but with no luck up to now... :-(
Does anyone have any similar experience? What do you do if you accidentally have broken up one satellite from a 2./5./7. expensi've speaker set? Should you throw away the whole set? Try to find similar satellites?
I hope Creative support will help, but I don't have much hope, at present...
Does anyone have experience connecting an S750 satellite to a 250D system? Can I expect any problems? Or it'll work?
Finally, just one more question:
The remote control.
Currently, the remote control unit on our 250D model works OK. But I am a bit worried, if anything happens, that the speaker set can become useless. So I'd like to order one spare new remote control for this model, just in case. Can someone help?
Maybe, even if this speaker set is not produced anymore, a new remote control can be ordered from Creative?
I'd really like to make these 250D speakers produce great sound again!? I am a big Creative fan and Creative 250D 2.1 THX is one of the best sound systems I have ever owned (or heard) and I'd like to do everyting to fix things up...
Thanks for all the help!
Cheers! :-)
PS The satellites of the 250D look very much like these. But these Cambridge Soundworks satellites are more powerful (20W RMS); I was even thinking to order a pair of them, but not sure if they'll fit well. Maybe a pair of S750 satellites (70W RMS) is a better idea? But in any case, if I can find a new pair of satellites, what to do with the remote control?... Please, help!

After exchanging several messages with official Creative Support, I feel a bit disappointed... For years, I have believed that Creative is a company that makes amazing audio products. They probably still do, but now that I am a customer who owns an expensive product of theirs, but with expired warranty, they don't want even to suggest a solution that can work for both parties!
Why is Creative Support so un-supportive? :-( I am still a Creative customer, after all, right?
My communication with Support went nowhere. After it was established that our 250D system is out of warranty period (it is only 2 years, btw), they refused to sell me a replacement satellite (even if they still may have some left in stock, for such cases)!
Finally, I found S700 satellites on ebay and I hope that 2 of them will fit well with the 250D system. Impedance of 250D satellites is 8 ohms (S700 satellites are 8 ohms, too), power is almost the same (250D satellites are 75W rms, and S700 are 70W rms), Signal-to-Noise of both systems is 99 dB, and frequency response is similar, too (250D satellites should be around 50Hz - 8 kHz, I think, and S700 should be around 50Hz - 20 kHz).
Well, my final 'point of worry' was that if anything happens with the remote control, we won't be able to switch on/off the system, even if the sub/amplifier works. So, I tried to ask Support just to sell me one new remote control, if they can. To sell, not to give for free, mind this! ;-)
They refused!
My e-mails are either left un-answered, or the only kind of reply I get is 'We can offer you 10% off our new products'. Well, I don't want to buy a whole new expensi've system, if I can just get 1-2 replacement parts for my old one, and have it working for years! :-)
(Imagine you buy an expensive DSLR camera, you break the LCD screen, and imagine how Canon or Nikon refuse to sell you a replacement LCD, because you're out of warranty! I can't imagine that!)
Well, with Creative it looks like this works only this way: Buy a new system. While speaker system is within its warranty period, Creative may replace defecti've and/or broken parts. Once system is out of warranty period, you can simply throw the system away, as Creative will not sell you replacement parts, no matter how politely you ask (and no matter if such parts are available at Creative or not)!
I hope I will be able to use our 250D system for some more time (after the satellites arrive). I don't know how I can find a new remote control, just to be on the safe side.
And I am not sure I will buy Creative product next time. I will carefully look around and maybe will pick up a product from a company which will offer me not only warranty support, but out-of-warranty support, too. That would be wise.
I like how the high-end Creative speaker systems sound. I simply cannot understand how this company can be successful, if they make such great products, but then refuse to help its customers, when they have problems... :-(

Very slow response when I click on a link, but almost instant response if I go back and click a second time.

I often get very slow response when I click on a link, any link. But if I go back and click on the link again, then the page will open almost immediately. I discovered this by accident and noticed that this happens every time. It would be nice if I got fast response on the first click without having to do this silly procedure and it seems to me that there's a simple fix. I would appreciate it if you could help. I'm open to any and all ideas. Thanks again.
Sincerely,
Al
Version 26.0 Firefox, Windows XP, sp/3

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Accept Remote Control Certificate

Greetings,
I'm fine tuning my remote control policy. I don't use encrypted remote sessions. I am trying to make it so that when I remote control a machine in ZCM 10.3 with XP OS it goes past the certificate acceptance automatically.
-OR- the cert accept box doesnt come up at all.
Basically you click on a workstation then click remote control, select the IP , ( I don't use DDNS), and it shows the remote session.
I have already told my remote policy to not use encryption. Yet i still get a cert.
Thanks for any help you can provide.

donasutton,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

The front row is not working. Remote control not triger,

Front row is not working, Remote control no response, command-esc not triger as well.
check keyboard shortcut from system preference, there is no front row.
anyone know why?

Ok first try it in another Account.
1. Open the account system pref window (System Preferences > Accounts)
2. Click the plus button at the bottom
3. Specify an account name (ex: test)
4. Add account
5. Logout of your current account, and login to the newly created one
If it works, then something was wrong with your account, move your files to the new account, and delete the old one.
If it did not work:
1. Try the reinstall again (DO NOT DO "ARCHIVE AND REINSTALL", as this may keep some file that is hindering FR from operating correctly
2. Make sure the FR file is in the Core Services Folder (Macintosh HD/System/Library/CoreServices/Front Row.app)
3. Make sure that you do not have the IR sensor turned off on your computer (System Prefs > Security > Uncheck "Disable Remote Control IR Sensor")
4. Make sure that your remote is paired (http://docs.info.apple.com/article.html?artnum=302545)
5. Make sure that the Command + Esc key is setup to respond by opening front row:
(1) Open system prefs
(2) Open keyboard & mouse prefs
(3) Click keyboard shortcuts
(4) Scroll down until you see front row
(5) Assign the Command + Esc key if it is not mapped
6. Finally, if all else fails, call AppleCare while your computer is still under warranty
Hope this helps,
Cory

Typing in remote Control when changing language with key combination of Alt + Shift some time change to Upper Case and Caps Lock is off

let me first say that this links dos not apply to my problem the first one is :
http://social.technet.microsoft.com/Forums/en-US/winserverTS/thread/46b24b68-debf-466e-a780-66a3b999724c
and it dos not apply because I dont use remote app, and also i able to change settings
http://social.technet.microsoft.com/Forums/en-US/winserverTS/thread/6a0f0eda-d3f6-4cd9-91ef-a7e0b20bc799/
this one has similar problem but he working with remote app and do not have the Upper Case and Caps Lock is off
http://social.technet.microsoft.com/Forums/en-US/itproxpsp/thread/f978e234-2b3c-4780-9dda-bec52b25330d
this one using XP i have it on windows 7 connecting to remote server 2008 r2
here is the issue
my users remote control a terminal services farm, now when they changing language to English some time it change to English Upper Case and caps lock is off ! then the Alt + Shift and the go back to English lower case and if they just play with
this (i mean they just use Alt Shift over and over to try to get back to normal state when you hold shift and alt and you change to English and back to Hebrew if you hold the alt shift one more time )
i tonic some thing strange ifi hold down first the alt and then the shift this issue happen more often
i upload a video on this showing the problem live on my dropbox :
https://dl.dropboxusercontent.com/u/103434771/meditowers/IMG_0245.MOV
here is how the normal setting should be
Alt + shift need to change to lower case English
then Alt shift one more time will go back to Hebrew
now if you hit on the caps lock you will be in English all the time with Upper Case

Hi Yitzhak,
Please refer to this post:
www.davidbond.net/2012/10/rdp-shift-key-gets-stuck.html
This post includes fix to this issue at the comments.
Netanel Ben-Shushan, MCSA/E, MCTS, MCITP, Windows Expert-IT Pro MVP. IT Consultant & Trainer | Website (Hebrew): http://www.ben-shushan.net | IT Services: http://www.ben-shushan.net/services | Weblog (Hebrew): http://blogs.microsoft.co.il/blogs/netanelb
| E-mail: [email protected]

Normal, then slow response to remote control

Similar Messages

Maybe you are looking for