Normal users can not login CDE

Hi every body.
I have just installed Solaris 10 in a Ultra 10 box. When my normal users tray to login CDE they must wait long and at the end they have a message window like this:
_DtMessage Failure Messaging System Inoperative To restart: 1) Save all open data files. 2) Logout. 3) Login again. Note: The current session will not be saved. When you are ready to begin the restart process click [ok] and proceed to save your files. behind this window there are another one: Action Required DT messaging system could not be started. To correct the problem 1- Chose [ok] to return to the login screen 2- select failsafe session from the login screen's option menu and login. 3- Check to see that the host name is correct in these locations /etc/src.sh /etc/hosts /usr/adm/inet.sec For additional information see the DT users guide. This issue only occurs when the home directory is mounted via nfs. If is mounted locally there are no problems. I deleted .dt* directories but this does not solve the problem. Any idea will be very appreciated. Guix

Is the "ttdbserverd" rpc service running on the nfs server?
Does the nfs client log anything to it's /var/adm/messages file?
For example errors like this:
Aug 12 18:43:31 elise-3com.tools.intra /usr/dt/bin/ttsession[851]: [ID 424917 daemon.error] Error: rpc.ttdbserverd on leo is not running
Aug 12 18:43:31 elise-3com.tools.intra /usr/dt/bin/ttsession[851]: [ID 908584 daemon.error] Ttdb_client::connectToDb(): fcntl(F_SETFD): Bad file number

Similar Messages

Single CUPC user can not login

Hi All,
I have a CUPC user who can not login to the client software.
She is getting login error: username/password.
She is connecting via a VPN and can ping both the CCM and CUPS directly using the IP address.
She can also login to the CCM user page using a link to its IP address.
I have ruled out incorrect typing because she used the same username/password to login to the vpn and the CCM user page. (email etc)
Since she is in a process of logging in, I dont have the option of getting the log files from her client.
Any ideas on how I can troubleshoot would be much appreciated.
Thanks very much
Regards,
Amanda Lalli-Cafini

Hi Amanda,
Please add the host names of CUPS server and CUCM on the client machine in the hostname file and retry.
Hope it helps.
Anand
Please rate helpful posts..

User can not login? Error comes up - only happens on mac pro

Hi. I have just set up a server system and users can login fine on all the imacs. However, When a user comes to login on a mac pro, they get this message:
The home folder of this user account is on a afp or smb server. Please contact the system administrator. This happens as soon as they press login.
We are running Mac OSX SERVER 10.4.10
Thanks,

Hi
On the MacPro what is in the DNS Servers field in Network Preferences? Compare what is there with what is in the same area on the iMacs that can successfully log in. Where are they getting their IP addresses from?
Tony

Authenication changed to for OWA user logon. Users can not login

When visiting our OWA page, users would log-on with their username.
There was many requests to change it to email address, so I changed the authentication type under Server Config>Client Access>OWA site
Previously it was set as "user name only" and I changed it to "User Principal Name (UPN)"
It worked that when you were at the OWA page, it would ask you for your email address...only entering your email address and password did not work. I could not get it to work for any users.
My question. Where is it getting the logon "email address" credentials? Is it getting it from the users reply to email address? It does not seem to be...
Advice would be appreciated.

Hi,
Open Active Directory Domains and Trusts.
Right-click Active Directory Domains and Trusts in the Tree window pane, and then click Properties.
On the UPN Suffixes tab, type the accepted domain used in your email address.
Now when you can select the new UPN suffix from Active directory users and computers->User properties->Account tab. Select the required account details. Now you can be able to login using the email address
Regards from Visit ExchangeOnline |
Visit WindowsAdmin

Can not Login Dev or End user ID

Hi all,
I created a new WORKSPACE WS1 as the SUPER ADMIN.
I then created an admin user WS1_ADMIN for this workspace (WS1).
I also created a developer user WS1_DEV for this workspace (WS1).
I also created a end user WS1_USER for this workspace (WS1).
My problem is, I can login successfully using the userid "ws1_admin" , but I can not login to "ws1_dev" and "ws1_user" even if I tried changing password over and over again. It kept on saying "invalid credentials".
Is there anything I missed out?
Thanks
Edited by: 843228 on May 27, 2011 1:52 AM

Thanks,
I have an application named ABC id 101, I developed in apex 2.0 in 10gXE database using the schema HR. I can run it on public using the id HR. Then I migrated it to APEX 4.0.2 in another database which is 11gR1. I migrated it using export/import. I imported it to my new worspace (WS1) and user "ws1_admin".
My problem is when I run the application is still asking for the HR id.
It will not accept the ws1_admin id in which It was imported anew, I am confused now where did it imported the old id "HR". How can I change the login id to the new ones?

R3trans & dbmcli schema user SAP SID can not login

Hello Guru's,
we have a problem with our MaxDB 7.6.6.6.
We can not start SAP, because the default user password is wrong.
But we can login with database studion to the schema user SAP<SID>.
We can administrate the db with control & superdba.
Has someone a suggestion, why dmbcli or R3trans can not login?
kwtadm> dbmcli -u SAPKWT,SAP -d KWT
Error! Connection failed to node (local) for database KWT:
-24950,ERR_USRFAIL: User authorization failed
kwtadm> R3trans -x
This is R3trans version 6.14 (release 700 - 03.06.11 - 17:57:00).
2EETW169 no connect possible: "DBMS = ADABAS D --- DBNAME = ''"
R3trans finished (0012).
trans.log
4 ETW000 [ dev trc,00000] Try to connect (DEFAULT) on connection 0 ... 96 0.018268
4 ETW000 [ dev trc,00000] Wed Feb 8 17:06:23 2012 1089715 1.107983
4 ETW000 [ dbsdbsql,00000] *** ERROR => Connect to database failed, rc = -4008 (POS(1) Unknown user name/password combination)
4 ETW000 75 1.108058
4 ETW000 [ dev trc,00000] -> SetSapdbCA(errcode=-4008) 27 1.108085
4 ETW000 [ dev trc,00000] -> freeConnection(con_hdl=0) 41 1.108126
4 ETW000 [ dev trc,00000] -> sdb_free(p=110f47270, size=608 (1017304 bytes allocated)) 577 1.108703
4 ETW000 [ dev trc,00000] -> sdb_free(p=110f46730, size=1016 (1016272 bytes allocated)) 59 1.108762
4 ETW000 [ dev trc,00000] } DbSlSdbConnect(rc=99) 15 1.108777
4 ETW000 [ dblink ,00433] ***LOG BY2=>sql error -4008 performing CON [dblink#8 @ 433] 66 1.108843
4 ETW000 [ dblink ,00433] ***LOG BY0=>POS(1) Unknown user name/password combination [dblink#8 @ 433]
regards
chris

solved
xuser list entry for DEFAULT was wrong.

Can not login to icloud at this time...

Hi
So, I do not get this. I have tried to setup an icloud account for my dad on his MacBook Pro running 10.8.2, using his Apple id.
It just says that it can not login to icloud at this time, but I can login icloud.com using the same user/password via safari.
So, what is this ?? Anyone with a similar experience ?
Thanks.
stj.

Workaround - works
I backed up and deleted the children's accounts on the Mac, recreated them as normal accounts with no Parental Controls and setup all of the iCould mail and other apps.
I then locked down the browser for sites like google and youtube to use their explicit content blocking.
I then added parental controls to the accounts.
All is now working correctly although there is clearly an issue,
If you can be bothered to do this, you'll be fine.

Lync 2013 disabled user can still login.

Ok. so we have this weird behavior and it's been driving us crazy for over a week. We have a lync 2013 deployment on a forest with several child domains.<o:p></o:p>
In the middle of the deployment, we noticed that our changes to the user characteristics were not being updated. Eg: we enable or disable
enterprise voice, no changes. We change the sip URI, log out, login, nothing, no changes. And we noticed that if we disable the user from Lync server (from the lync controlpanel), the user can still login. We assumed some lag on AD replication, but no, a user
can still login after a week!<o:p></o:p>
The deployment is a standard Lync 2013, single FE, with a single Edge server. We have enabled Enterprise voice, changes to the enterprise voice routes are
working, if we enable or disable a route we can see it on the client, but changes on the dialplan are not reflected.<o:p></o:p>
I can’t find any reference to this behavior. I know if I disable a user from the AD he can still signing into Lync, but this is different, we are disabling
the user from Lync server. We even removed the user completely from Lync and he can still use it as normal.<o:p></o:p>
We checked the user using adsiedit and the msrtcsip-userenabled is set to false, we even voided the certificate via lync console. Still able to use it.
Suggestions?
Thanks in advance.
Fabio Ricci.

Hi,
Please check if there is any error message on FE Server when the issue happen.
It seems to be the issue of CMS replication.
Please check CMS replication status by running Get-CsManagementStoreReplicationStatus.
If CMS replication not update to the latest version, run Invoke-CsManagementStoreReplication.
If the issue persists, please check Lync Server update, make sure Lync Server update to the latest version, and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Can not login access manager

mail server version is JES messaging Server 6 2005Q4 :
My Access Manager:http://hostname:8080/amserver
last week, i login access manager, under the web label or configuration label�F
in "ldap" item�Ci add new dc=xx,dc=xx,dc=xx�C
then save configuration.
but after that i can not login access manager.
when i user admin login,it print:"
Authentication failed".
what should i do to restore access manage?
thanks!

javatoall wrote:
Hi,
I login Access Manager, access sample "realm" -> Authentication->
Advance Properties -> User profiles and then I choiced "Dynamic with user Alias".
Then I only configure JDBC authentication with mysql database that I don't used ldapservice.
When I created a one new user in MySQL, I can login into web application that i security as "sample.war" successfull but new user don't right access resource that i protected before.
When i login access manager with amdmin user, I can not find user that i has been created it in MySQL database. t
When the users are created through the dynamic profile, the default cn/sn are set to "default" , after creation you need to login to amconsole as amadmin and change/add proper values for these attributes.
Alternatively you can set the protected resource's policy subject to Authenticated users. This will work but not sure will meet your requirement
>
When i login access manager console with new user, it login successful, and view Profile of new user that I has been created.
Can you tell me How to manage new user that I has been new in MySQL by Access manager console ?
I want to configure access proteced resourse for that user. How to configure that ?
read above use the authenticated users subject
Thank for every help.
VinhND.

Can not login to Oracle Application Express after upgrade to 3.2

I installed oracle database express and then I upgrade APEX to 3.2 on it. I got the login page but I can not login by using any account, like SYS, SYSTEM. From the document, internal ADMIN account should exist but I did not see it from dba_users table.
Thanks,
Julie

HI Don,
I did run apxchpwd.sql to change the Application Express ADMIN user password. Then I invoked http://mymachine:8080/apex and got the Application Express login page. I put ADMIN in workspace and ADMIN in Username and the new password. But I still cannot login. I also tried http://mymachine:8080/apex/apex_admin page login. I typed ADMIN as username and the new password. Then I clicked on Login button. Nothing happened. No error message.
Any idea?
By the way, what does apxxepwd.sql do?
Thanks,
Julie

A particular network user can't login to a mac in a classrom but other network users can. Then the network user can login to other identical macs in same classroom. Anyone seen this before?

A particular network user can't login to a mac in a classrom but other network users can. Then the network user can login to other identical macs in same classroom. Anyone seen this before? It has happen twice. Two different teachers in two different classrooms entering the correct user name and passwords and computer won't allow them to login. Then they try in different computers in same classroom and have no problem login.

Yes. I can login with a test user. And any other network user can login as well to this particular mac. Actually the mac has bootcamp and boots into either mac or windows. The same user entering the same login username and password can login into the windows side, but not the mac side.
I had this same issue last semester in another classroom, another mac and a different teacher. This summer I reformatted and imaged that mac and I asked that teacher to login today to that reimagened mac and she had no problem today doing so.

After install oracle 10g, enterprise manager web version, can not login

Hi Guru,
I have installed oracle 10g on windows xp pro sp2 successfully, can use sqlplus to connect to DB, but when using IE to login enterprise manager web version port 1158, it failed. The login page came out, but when I keyed in the right userid/password ie sysman/pwd1234, the login screen just refreshed, nothing happen. but if I purposely key in wrong userid or password, the message "invalid userid or password" comes out.
Another "interesting" thing is, I can login web version isqlplus successfully using the same userid/password. but can not connect to web version isqlplus/dba, even I use user sys, also can not login.
Need your urgent help to solve this problem.

Hi.
What does the log say?
From %ORACLE_HOME%\opmn\logs folder.
rgds
Kjell

Database Login - Can not login as sysdba

I have a userid for a database on a separate server. I can login as sysdba on the server with the database and from the OEM server. I can not login as sysdba from OEM. Is there a change that needs to be made to the password file or does there need to be password file on the OEM repository server?

What do you mean with OEM server here? Centralized gridcontrol server? That's a different concept, you connect to a specific administration user (often SYSMAN), 'sysdba' is not applicable here. Otherwise a server, which hosts a standalone DBConsole is not different from any other database server.
Werner

I can not login to Adobe Application Manager without admin privilage. WHY?

I can not login to Adobe Application Manager without admin privilege. WHY? I must run app as administrator, only this way i can login using Adobe ID.

if you are receiving an error that you do not have sufficient permissions to install the software then please try installing under a newly created local Administrator account.
A normal administrator account should not run into these difficulties so it would appear the file permissions under your current account have been damaged.
Alternately you can review your installation logs to more accurately identify where the file permission errors are occurring. Please see Troubleshoot with install logs | CS5, CS5.5, CS6 -http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to locate and interpret your installation log files.
Hope this helps you.
Regards
Rajshree
Re: Creative Cloud needs Admin privileges to install
Re: Creative Cloud needs Admin privileges to install

Can not login to OS X Server 10.4

Hi, I'm using OX Server 10.4 with Open Directory.
I've been experiencing a strange behaviour sometimes. Every other month or so, users stop being able to login via SSH to my server.
Disabling and enabling SSH in sharing doesn't do the trick...maybe it is some ApplePasswordService issue.
I just reboot the server as I never found any way to resolve this either here or at any other site.
Today, feeling confident that it could be an ApplePasswordService issue
I've done the following:
prompt>NeST -stoppasswordserver
prompt>NeST -startpasswordserver
Didn't work either...
I reboot the server and now I can not login locally with my personal or admin account, so now it's complicated.
Booted in Safe mode (pressing shift when booting) but i get the same thing. After entering the username and password the server shows that progress colour circle spinning forever.
Booting in single user I was able to check the logs.
In /var/log/secure i get:
SecurityAgent[104]:Showing Login Window
SecurityAgent[104]:User Authenticated: continue login process
And nothing else after that.
I've done "fsck -fy" in single user also without any result. I really need some help here...
Any ideas please ?
Thank you very much.
Regards
David

I think I made a mistake and typed a command made for NetInfo. Now, could that disable Open Directory authentication ? If so, How can I restore the Open Directory authentication ?

Normal users can not login CDE

Similar Messages

Maybe you are looking for