Normal Window State of Portlets after login

Hi,
I have my application running in Sun Java System Portal Server 7.2
I have a number of portlets in my desktop.After successfull login I see this desktop with all the relevant portlets. I maximize one of the portlets, it takes the entire screen thereby minimizing/hiding the other portlets. I logout at this stage with one of the portlets in maximized state. Suppose now if I re-login with the same user-id, I see the same portlet in maximized state i.e the user preference is stored. How can I disable this user preference such that after login all the portlets are always in normal state. Any help is appreciated.
Thanks.

hi,
I don't remember exactly and right now i don't have portal server installation.
As far as i remember you can disable controls of channel, so user will not be able to minimize of maximize and the size will remain same.
thanks,
sumant

Similar Messages

Session state always invalid after login

Hello community,
i have a functional login process which uses my own login with username and password. After login i branch to application start page, but this session now is different from the start login session, so every login is invalid and will branch to authentication scheme invalid page.
My login url is: f?p=100:100:123456
After correct login (i have tested in the database with a lot of inserts into tmp_table)
i want to branch with the standard login procedure wwv_flow_custom_auth_std.login() to page 1000.
The correct url is shown in the browser, but the current page is the login page 100, because (i think) the session is invalid. In the authentication theme the invalid session page is set to page 100.
I have tested several pages and always this page is branched.
So im shure, that the session state is always invalid after login.
But why ????
Has anyone an idea ?
Thank you for responding.
Frank

Hi Jari,
problem was solved.
The IE8 has cached an invalid site.
I know now were it is come from.
I have an after submit process which sets the cookie with following code:
owa_util.mime_header('text/html; charset=UTF-8;', FALSE);
owa_cookie.send(
name=>'DHW_COOKIE',
value=>utl_raw.cast_to_raw(dbms_obfuscation_toolkit.md5(input_string => ':P100_REGCODE' || :P100_USERNAME ))
owa_util.http_header_close;
But this results in display on the screen like html text without tags, so it looks like text on the screen header.
It shows "content-type=text/html charset=WINDOWS 1252 .......
The cookie is not set to the disk and now the IE8 explorer is dead.
The described problem of this thread is shown.
If you close all sessions and restart IE8 then the error is fixed.
Also i have disabled the after submit process with setting the cookie.
So i live now without having a cookie set.
Do you have any idea for this behaviour ?
Frank

Windows 8 - Black screen after Login

Hi
I've got Windows 8 Pro (original) installed via bootcamp on my Macbook Pro (Mountain Lion). When the laptop sits a while, the screen tends to go black, into a sort of sleep mode, and when I want to use it again, the computer emits an internal sound like it's booting up, but then it shows the account/profile login screen. After I log back in, it's just as I left it. This is standard.
I came back to the computer but it wouldn't return from its sleep mode. I manually rebooted the laptop, WINDOWS 8 loaded, I logged into my account, and after a couple of seconds, the screen went black again. I believe it was running fine, it's just that the screen seemed somehow disconnected from displaying what the computer was actually doing.
Thanks for your time.

Windows 8 isn't supported in Boot Camp at this time so I would expect some glitches if you're using it.
Clinton

WINDOWS 8 BLACK SCREEN AFTER LOGIN PROBLEM

Please help me i have a problem with my computer it goes black screen after i login
my desktop is hp pavilion a5055d my os is windows 8 i dont know what the problem
i have a ati radeon xpress 1100 for videocard ..
I tried to restart many times.

Hi,
Did this issue occur before?
Try to logon with Safe Mode to see if the same issue occurs.
Furthermore, you can try to update BIOS for your machine?
You can refer these article to update BIOS if your machine cannot boot:
http://www.ehow.com/how_7356859_update-bios-windows-won_t-boot.html
http://www.wikihow.com/Fix-a-PC-Which-Won't-Boot
Hope that helps.
Leo Huang
TechNet Community Support

Windows XP instantly freezes after login

Hey,
So lately I've been having some problems with Windows XP. It seems that my MBP will completely freeze up and become unresponsive, when I finally get it to work via voodoo or go into safe mode the event log shows nothing wrong.
WXP works just fine for a second or two, but it seems that when it reaches a certain step in the startup something will be loaded that just makes it freeze up. This is not present in safemode, as it works just fine. I've no idea what it is though - how would you go about figuring this out?

HI Timothy,
would you mind me asking where were you able to download bootcamp 1.2, i've been having the same problems as well.. very time consuming. but i have a solution once that happens, upon login, immediately press "CTRLaltDEL" then choose "LOGOUT" then login again, that works for me most of the time.
Mancilla88

OSX 10.9 Mavericks is there any way to hide servers which always appear in finder after login (hide login items doesn't work as stardered)

hi all my boss has just got himself a nice new mac and wants to connect it on to my windows domain at work, no problems there it’s all connect fine, one thing we done was to map a few of our network drives on our domain so he can easily load them to his mac, works great when it’s on the domain however when he goes home and logs in for each mapped drive it throws up a window saying it can’t connect or when it is connect opens up every drive, even after disabling them at login, now on the apple website the text reads "if you don’t want an item's window to be visible after login, select hide. (Hide does not apply to servers, which always appear in the finder after login), does anyone know any work around that can maybe solve this or point me in the direction where I can find one.
Cheers
Gordon
Network Admin
BPDZenith

hi all my boss has just got himself a nice new mac and wants to connect it on to my windows domain at work, no problems there it’s all connect fine, one thing we done was to map a few of our network drives on our domain so he can easily load them to his mac, works great when it’s on the domain however when he goes home and logs in for each mapped drive it throws up a window saying it can’t connect or when it is connect opens up every drive, even after disabling them at login, now on the apple website the text reads "if you don’t want an item's window to be visible after login, select hide. (Hide does not apply to servers, which always appear in the finder after login), does anyone know any work around that can maybe solve this or point me in the direction where I can find one.
Cheers
Gordon
Network Admin
BPDZenith

Agent going to ready state after login

Hi guys,
I have UCCX 5.0(2) and I would like to force agent to go to state ready after login. There were some posts on this topic and they suggested to play with workflow:
1. add add action agent ready at startup - for this I get: "Error on Startup Event. Error Message: An Agent State Action may only be used on Answered and Dropped Events."
2. add macro - record putting agent in ready state (keystroke Ctrl +W). This I can do, but agent gets error during login: " Could not execute Macro Action. Unable to playback to windows program."
Did you have similar problems? Did you solve it and how? Or maybe you have some other idea how to force agent to go in ready state after login?
BR,
Jelena

Hi,
Problem An agent using Windows XP was able to start Agent Desktop, but was
not able to enter an active state.
Solution Windows XP can be configured so that the Internet Connection Firewall
(ICF) is active. ICF acts by keeping track of all traffic to and from the
computer; it will only allow information through that has originated from
that particular computer. If a message originates from outside the
computer, it will be discarded.
To solve this problem, either turn off ICF (requires someone with
administrator rights to the computer) or override the defaults to include
known “good” connections like the CAD servers.
And also, is it by any chance happening during a failover or failback scenario in a High Availability (HA) setup?
If its a HA setup, did you install this CAD after the HA setup is made i.e. the CAD has the entries for the ip address of the both the nodes.
Hope it helps,
Anand

Windows XP hard crash reboot after login

I've seen a few topics about this, but none of them with solid regression info yet so i'm starting this thread. I hope some of you out there can help out, but I fear the answer is that were all screwed.
SUMMARY:
Windows XP will hard crash (reboot) just after login after loading the UI and during the loading of network components. This then results in the system rebooting into a black screen with no standard windows debug. (which can be forced by F8) Hard shut down is required to restart boot process. This problem can also occur from a waking from sleep, and very rarely occurs at random. When its caused during normal operation its usually spawned on by pressing a button on the keyboard. It will occur randomly at startup, and will occur with Starup Disc set or Option Select. Rarely it will boot into windows XP on the first try, more often (over time) it will require 3-5 reboots to get into XP successfully. This problem isn't caused by the install of any software, instead it progressively gets worse over time. I have experienced this problem with BootCamp 1.3, 1.4 and 2.0 on my MacBook Pro 2.16, but I have never experienced it with my Mac Pro ever which has the same OS and bootcamp installed.
I'm convinced it has something to do with the network drivers and how they are loading. I've noticed that the times it fails to boot that the WiFi and Local Area network icons aren't loaded in the system tray, and the times I have success getting into XP that they are already present when the UI is loading. This same behavior occurs on my Mac Pro and other PC clones, but they dont hard crash when this occurs. On them, you just have to wait for the network to be available.
STEPS:
0) MacBook Pro 2.16 17", Mac OS X 10.5.1, Bootcamp 2.0, Windows XP Pro SP2
1) Power up
2) Hold down Option (can set bootdrive as well)
3) Select Windows
4) Select a User (with password set)
5) Enter password
RESULTS:
Hard crash reboot just after UI loads while network compoents begin to load into the system tray.
WORKAROUND:
Shoot dog
REGRESSION:
Never occures on Mac Pro
Occures with Bootcamp 1.3, 1.4 and 2.0
P.S. I'm writing this in Bootcamp

UPDATE
I've gone into msconfig and turned off everything and have been starting up just fine, so it seams one of these items is cuasing the problem. I see that some people say its the keyboard manager, and I wouldn't doubt it now. So i'm going to leave everything off for now, make sure its always booting and then slowing rool items back on. I'll keep this up to date.
If you want to do this yourself, you can do it two ways.
Built in:
1) Click on the Start Button
2) Select Run...
3) type "msconfig" and hit OK
4) Select the "Startup" tab
5) Unselect everything you see there
6) Close and reboot!
3rd party (the way i prefer)
1) Get Spybot (the new one is awesome)
2) install Spybot
3) Run Spybot
4) Update, immulize and scan (optional, but you will be surprised)
5) Select the "Mode" menu option
6) Select "Advanced mode"
7) Select 'tools" on the lower left hand side
8) Select "System Startup"
9) uncheck all options.
10) close and reboot!
Note: this appiaction is really great, and it will also install a device to watch for reg changes which is good for this sort of regression. Again, its not nessiary to install spybot, but i love it and have it on every PC i ever use and have never regretted it. IT WONT SLOW YOUR COMPUTER LIKE OTHER CRAPPY APPS. This is a very light and clean app.

Desktop won't display after login window

Hi,
I'm trying to help my sister in-law with her computer (PowerBook G4). She claimed it was having a lot of problems and thought a clean install would fix things. However she had lost her install discs, and now I've seemed to make things worse.
I started by trying to back up her computer - copying the hard drive to an external HD. However I kept getting a -36 Error. I then connected her PowerBook G4 to my MacBook Pro (10.5.8 2.33 Intel) via Firewire and in Target mode used Disk Utility to make a disk image. Unfortunately I got the -36 Error again. I Repaired the hard drive with disk utility, but it said everything was fine. Then I read on the forum that the -36 Error meant that it was a corrupt file that was causing the issue. Since it always errored out in the same area, I simply deleted the folder in that area. After that, the disk image worked.
(This part is bad - I know now, but didn't when I did it:) I then put in the gray install CD from my MacBook Pro (Intel) into her PowerBook G4. I opened the system preferences and changed the startup disk from "Macintosh HD" to my install disk. I restarted the computer... it did not boot up. I connected the two laptops again and force restart in target mode. I was able to eject the CD so that when it restarted again, it reverted back to the "Macintosh HD" This is when I discovered that the gray discs are specific to computer and my plan would not work.
However, now her computer boots up to the Login window as normal... but when you login... the "blue desktop image with design" displays, but no icons appear. The computer hard drive spins, the monitor will go to sleep and wake up, the trackpad will move the arrow, but no icons and now menus?? I've left it overnight to see if it eventually will change, but nothing changes. If I press keys, the first few won't do anything, but it quickly gets to a point where it just beeps at me each time I press a key.
I can sign in using single user and already ran the fsck that is mentioned throughout the forums. It (like the disk utility) finds no errors. Any help or advice would be much appreciated.
Thanks!

Hi BD & RC,
The new user reset worked great to allow me to login again. Instead of doing a clean install, I just went through her applications and deleted ones that I thought could be suspect for some of the issues she was having. It seems to be running fine.... with one exception... the Airport won't work.
When I went into the Network settings, it was stuck in a continuous loop with the error "Another application has changed your network settings." I saw BD's help on another post to go into security and check "Require Password to unlock each secure system preference" to break the loop ( huge THANKS!!). After trying to set up multiple new locations, it finally dawned on me that the Airport was not an option. When went into System Profiler and chose Airport Card, it says "No information found."
So long story short... it appears that with all the little issues going on on this computer, the monster issue wouldn't have been solved by a clean install anyway (you were right RC)... the Airport Express card must have died.
I guess she'll either need to start connecting with an ethernet cable or buy a new airport extreme card.
Thanks for all your help guys!

Windows 8 .1 black screen after login with cursor

after login in pc i get a black screen and a cursor i can do nothing please help me i updated windows 8 to windows 8.1.

HI , Welcome to the HP Forums! It is a grand place to find answers and information! For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide. Learn How to Post and More How Do I Find My Model Number or Product Number? I grasp that you have a HP 15 notebook and you recently upgraded from Windows 8. to 8.1. Now after you enter your Windows password you get a black screen with a cursor. Here is a link to HP PCs - Black or blank screen with blinking cursor after entering Windows password. To say thanks for responding please click the thumbs up icon below. If this solved your difficulty please tell people by selecting solution provided. Best of Luck!

Black screen after login on Satellite L350-20Q (normal mode)

My Satellite L350-20Q run Vista basic.
After login that is normal I go to the turning arrow then to a permanent black screen when I start in normal mode.
In safe mode I have a normal behaviour and I can work. Spybot report no malware present. But my Avast antivirus does not seems to work in safe mode.
Do you have any idea of this problem ?
A fellow has advised me to update my graphic drivers which is presently Intel Corporation 12/06/2008 version 7.15.10.I502 for Mobile Intel 4 series express chipset family. What is the URL and the filename to download the most recent driver ?
Message was edited by: nigelle normal mode added in title.

1) I have already done a roll back but without success
2) total reinitialisation and updates is a long and tedious process I wish to avoid if possible.
Downloading and installing a new driver is fast so I prefer to try this before even if the probability of improvement is low. Where can I find the driver for graphic ?
3) I bought this lap top in June and Win7 was released in September or October.
All manufacturers had promised a free update to Win7.
But after the release of Win7 my laptop was not in the eligible list may be only because it ran on Vista basic and they were not Win7 basic and Toshiba did not want to pay for the upgrade...
Not very honest !
I dared not to buy a Win7 license because I think that Win on a laptop is a slightly modified version.

Black screen after login. Windows 8 is not opening

After login, I only have a black screen with a cursor.
Windows 8 does not open. Cannot get to "System Restore" or Control Panel.
HP hardware self- diagnostic tests were negative & didn't help.
Please offer possible solutions for recovery.

Then that does not pertain to your problem.
On Kaspersky Rescue Disk on another computer download and burn to USB stick or DVD to run a full scan on your computer.
http://support.kaspersky.com/4162
Are you able to boot into Safe Mode to perform a System Restore?
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Adobe content viewer grey screen after login on windows 8.1

we're on Windows 8.1, content viewer is not running, after login it shows a grey screen with just "Adobe content Viewer" on the upper left, but nothing working....

I'm sorry Neil, I'm working on a folio on Indesign, if I share the folio from Folio Builder (Indesign) to my account, and then I open adobe content viewer on my iPad, I can see the cover of the folio shared and I can download it.
Instead, with the same account on adobe content viewer (windows 8.1), I see nothing and I can not do any action.

After login close the login window and open home page in new window

Hi guys,
I want to go to a new window for the "home page" without browser back button etc. after login validation.
And also close the login window at the same time.
Here is the code I used after the login validation.
ExtendedRenderKitService erks =Service.getRenderKitService(FacesContext.getCurrentInstance(),ExtendedRenderKitService.class);
StringBuilder script = new StringBuilder();
script.append(" params = 'width='+screen.availWidth-10;\n" +
" params += ', height='+screen.availHeight-50;\n" +
" params += ', top=0, left=0'\n" +
" params += ', fullscreen=yes';\n" +
" params += ', scrollbars=1';\n" +
" params += ', resizable=1';\n" +
" params += ', status=1';\n" +
"window.close();\n" +
" newwin=window.open('home.jspx','xxxxxxxxx', params);\n" +
" if (window.focus) {newwin.focus()}");
erks.addScript(FacesContext.getCurrentInstance(), script.toString());
This successfully opens a new window. I want to close the current login window at the same time.
Please help me with this.
Regards !
Sameera

on the 'Submit' onclick event add some JavaScript code:
this.form.target = '_blank';

How to view the login log in window NPS after login cisco switch and without SQL server database

how to view the login log in window NPS after login cisco switch and without SQL server database
in summary
there is only log with event id 4400
A LDAP connection with domain controller XCPAWS20.cyberport.noc for domain NOC2 is established.

Hi adil,
For your issue, you can create a custom security token service (STS) and then set up a trust relationship between a SharePoint 2010 farm and the custom STS.
For more information, you can refer to the articles:
http://forums.asp.net/t/1335229.aspx?Sharing+Authentication+Ticket+Between+ASP+NET+and+Sharepoint
https://msdn.microsoft.com/en-us/library/office/ff955607(v=office.14).aspx
http://www.paraesthesia.com/archive/2011/02/01/working-with-windows-identity-foundation-in-asp-net-mvc.aspx/
Best Regards,
Eric
Eric Tao
TechNet Community Support

Normal Window State of Portlets after login

Similar Messages

Maybe you are looking for