Normalize in the bounce section?

when you go to bounce a tune, what exactly does that normalize function do if you turn it one?
and yes I am experiencing sluggish issues, sometimes even to move a plugin, never had that before, but i am running a bunch of 3rd party

In most circumstances, this is true, the new Normalisation feature in logic is quite cool for doing rough mixes and what not as it also turns things down, if you get overs at the master output it'll bring the level down to compensate, handy when you need to work rough and fast.
Again, the manual says so.

Similar Messages

Can I set the normalization level in the Bounce dialog?

I want to normalize my tracks to, say, -1db instead of 0db. Is there any way to set the normalize feature in the bounce dialog to do this?

Hi
The Art Of Sound wrote:
Which in turn reduces the dynamic range......
Louder parts get quieter... and quieter parts get louder....
No
Turning the gain up or down to ensure that the peak levels ( or RMS levels) merely turns the whole signal level up or down: no compression or expansion
http://en.wikipedia.org/wiki/Audio_normalization
CCT

Why is the bounce not reflecting volume changes in my bass track?

I am running Logic Pro 9.1.7. I have input a bass guitar directly through an Apogee Maestro 2 using the direct input setting. When I use the mixer, all of the functions seem to work fine on the bass track (fader, volume, plun-ins, etc), but when I bounce the track the volume of the bass is still at the original input setting even though it was materially reduced (-15 db or more) in the mix. All of the other settings in the mixer (fader, plug-ins, etc) appear to be properly reflected in the bounce. Only the volume reduction seems to be missing After some experimenting it seems that the bounce may reflect an increase in volume in the mixer over the original bass guitar input, but it is hard to be sure because Logic only permits a 6db increase in volume and the bounce is being played through iTunes, so subtle differences are hard to detect. But even a -50db reduction in the bass mix produces a lound and clear bass in the bounce at the original input level.. This problem is not present for any track that was input through a microphone.
I have searched in vain for an explanation. Software glitch? Some parameter not set right? Any suggestions greatfully welcomed.

The latter. I just recorded a bass track as an audio track along with tracks for guitar, banjo, harmonica, etc. (I bounce off line so playing along with the bounce is not possible.) The thing is that the other instruments I play are all acoustic, so they go on their tracks through a mic. The bass is an electric bass guitar, and while I have an amp and could mic it, it just seemed easier to put it on a track by plugging it right into the preamp, which has an "instrument" input setting as an alternative to the "microphone" input setting.
What is so screwy about this is that the normalize function in the bounce window should make proportionate adjustments to all instruments. At least that's what the owner's manual says it does. But what it seemed to be doing is treating the directly input bass and the microphoned instruments seperately. I usually record the bass track at a fairly high input so that I can clearly hear it in the headphones as I play over the previously recorded instruments and vocals. Then I rely on the mixer to bring down the volume of the bass to a more reasonable level in the final mix. But with the normalize function on in the bounce, the bass was still coming through in the bounce at the original input level or something very close to it. That would be fine if the other instruments were properly jacked up as well so that the bounce sound like what I heard through the mixing board, only louder. But what I got was a mix with all of the all the other miced instruments sounding just like they did through the mixing board and the bass blasting away at the original recorded level notfwithstanding the volume reduction on the mixing board. Very strange. I assume this is a software bug, but now at least I have a reasonable work around. Thanks again.

Did they take out the free section, you know where they might offer a free episode/song/video/etc in one spot (or at least did they for Canada)? I can find the english song of the week, but that is it...

Did they take out the free section, you know where they might offer a free episode/song/video/etc in one spot (or at least did they for Canada)? I can find the english song of the week (I used to enjoy browsing both the english and french), but that is it...

Nevermind. For some reason it loaded wrong/poorly/? It was back after I closed itunes down and re-opened it.
Thanks though

HT201272 Some of my tv shows do not show up in the purchased section... where are they?

I bought a tv show, but then deleted it because I didn't have enough room on my computer. I want to redownload it, so I went to the purchased page in itunes but it is not there!

It's clearly where ? There is the ability to hide items so that they don't appear in the in the Purchased link for re-downloading - you've checked by logging into your account and viewing the hidden section ? And you didn't originally buy it when you were in a different country ?
If it's not hidden then you could try contacting iTunes support and see if they see what's happened to it : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

How do you delete duplicate photos in the photo section of your iPad?

How do you delete duplicate photos in the photo section of your iPad? My iPad has duplicated n tripled my photos n want let me delete them. I can delete photos from any other section but not in photos, this is taken up all my memory. Help!!

The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
 Cheers, Tom

Why dont i ever see downloaded pdfs in the "documents section" in adobe reader on my ipad?

Why dont i ever see downloaded pdfs in the "documents section" in adobe reader on my ipad? They only stay in the Acrobat.com section and when I try to move them the "documents" partion is not listed as an option. Only the folders i have within acrobat.com are listed

The pdfs have been uploaded to Acrobat .com (from my computer) I open the Adobe reader on my ipad and see them in the acrobat partition of the reader. I tap on them and they open. To test whether they were truly downloaded ,I turn off wifi and they still open. I consider this "downloaded" BUT... they stay in the acrobat.com partition of the reader. Nothing ever goes or lives in the "Documents" partition..nor can I move anything there.....Why not? What is the"documents" partition there for if nothing lives or can be moved there?

I dont see the device section in my itunes

I dont see the device section in my itunes when i have my iphone4 connected to my PC

The following may help: Manage your auto-renewing subscriptions - Apple Support

Greetings,Currently I am having a big issue to access the "Shop section(tab)" of the website.

Greetings!
I need assistance from you wonderful mac techies out there.
Currently I am having a big issue to access a website's "SHOP section(tab)" within this website.
While in the process of paying for my items in my cart, I received a website message saying something
To the affect that this website is being updated. Your items in your cart will be in your cart.
Then the website's screen kicked me out the door.
A few days later I accessed the main page of this website with no problem.
I can read the information on the main web page pertaining to items I need to purchase, etc., with no problems.
I click and maneuver from on one tab to another from the main page within this website with no issues.
When I click on the "SHOP section(tab)" within this website to complete my purchase.
Part of this website an error occurs on this "SHOP tab".
"Safari can't connect to the server".
Safari can't open the page "https://and the name of this website" because Safari can't connect to the server "www.the name of this website".
I click on the reload from the view of the toolbar and I can't access this website's "Shop section(tab) at all.
I e-mailed the webmaster of this website a few times, but no response.
In the past I was able to access the "Shop section(tab") within this website many times to purchase items with no issues.
Now I am at my wits end as I really need to complete my purchase from this website.
I cannot purchase these items from other websites. Only this website. Good Grief( :
I am at my wits end as I really need to complete my purchase with this particular website.
So, I really need anyone's tech expertise to help me access the "SHOP" tab within this website.
I can't figure this out (:
No issues with:
* My modem and ethernet connections
* My network provider connection
* Cables and wires
* Power strip unit to protect my electronics.
* Utility bill is up to date.
I have a Mac Desktop 23 inch screen (Purchased 01-01-2013)
                                                  Lion: OS X
                                                  Version 10.8.2
                                                  Processor: 2.7 GHz Intel Core i5
                                                  Memory: 8 GB 1600 MHz DDR3
I use Safari: Version 6.0.2 (8536.26.17)
I use the Mail app that shows a postage stamp with the picture of an eagle
                                                  It is the Version 6.2 (1499)
I really need help access the "Shop section(tab)" of the website to complete my purchase.
What is the next step to fix my dilemma?
Thank-you all in advance with your expertise, and patience.
Very Much Appreciated.
With Kindest Regards

You can try basic steps like these in case of issues with web pages:
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and only cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Report does not show the main section while calling from forms 6i

Hi
I am running report from report from forms 6i but is does not show the data in main section, where as the data in the header section is ok.
But when i run the same report independantly from report builder it show the both header and main section with relevent data.
pl solve the matter
thanks in advance

can you tell me more about this, you might check if you are using different users when you call this report or if the user has all privileges to see all tables in this report

Crystal Report error - "the group section cannot be printed..."

Hello to everyone.
I have a CR report based on a database view.
Everything is ok when i run the report in the CR designer but choosing the option to preview the report or run it from the SAP Business One (8.81 PL 08) i get an error:
"the group section cannot be printed because its condition field is nonexistent or invalid. Format the section to choose another condition field. Error in file "the Report name".rpt. Invalid group condition".
i must say that this happens in all my reports where i have group data. Also i must say that all those reports were ok some days before...
Is there a way for me to know what field is it refering to?
I have verified the DB and it is pointing correctly and the also the View returns data.
Thanks in advance

Hello Gordon,
thanks for your response. the reports were working fine until 8.81 PL05
We have upgraded the customer from PL05 - > PL08 a week ago.
Do you think that maybe this is the problem?
Thanks in advance

I don't know if this is the right section but I experience the following issue with Adobe Acrobat Pro XI installed on Windows 8.1. When I start Acrobat the related window opens normally but, after some scroll up and down along the document, it blocks, Acr

I don't know if this is the right section but I experience the following issue with Adobe Acrobat Pro XI installed on Windows 8.1. When I start Acrobat the related window opens normally but, after some scroll up and down along the document, it blocks, Acrobat doesn't respond to any command I can give and, in place of the pointer arrow, a vertical bar, as the one of the text editor appears. The only way I can stop Acrobat is by means of the task manager. I tried to de-install and the re- install Acrobat but the behaviour is always the same. What can I do??

Have you opened Acrobat and gone to Help>Updates to get an updated install?

HT1918 My husband's iPhone4 uses one apple id for purchases and updates, but another is listed in the App Store. How do I reconfigure his phone to only use the apple I'd and password that is used in the the "featured" section of the App Store?

My husband's iphone4 seems to have 2 apple ids. The one listed in the featured section of the App Store is the correct one. The one that asks to be signed into for purchase and updates is also mine, and the incorrect one. Hence, our devices are linked. How can I remove my apple Id from his phone so that there is no connection between the two?

I think it may be because he got his phone first and not seeing a future issue, I set his phone up to my already existing apple Id used for my iPod. If I connect his iPhone to our pc, can I create his own apple id account?

How do I transfer video clips from iPhoto to iDVD? I followed the instructions in the help section but it did not work.

I would like to make a DVD from video clips I took of my Grandchildren. I went to the help section and it stated to click on the video clip, then click 'share' and choose 'send to iDVD'. That option was not available on the share button. How to I transfer to iDVD. Thanks for any help.

Do you plan to put each video clip in iDVD to be playes separately? If so then here's how:
1 - open iDVD and select your theme.
2 - click on the Media button at the bottom right and then on the Photo button at the top.
3 - in the search window type in ".mov" (or the extension of the video clips you plan to use).
4 - all of the video clips with the extension you entered will be displayed and you can drag them into the menu area at the left.
Another way would be to put all of the video clips in an Album and click on that album to view and drag the clips:
Remember, the order that they are added to the menu will be the order that the buttons will highlight when you scroll thru the buttons with a DVD player remote.
This will give you a menu with a separate button for each video clip (up to 12 in a menu with some themes).
If you want to play all of the clips one after another you could create a slideshow in iDVD with the "+" button at the bottom and drag the video clips into the slideshow as you would still photos. Set the slide duration to anything but manual and don't apply any transition.
That will let you play all of the clips sequentially.
OT

I suddenly have problems syncing my itouch. when i connect it to the computer, it shows that i still have all of my songs and playlists. But when i look on my itouch, it says i have no content in the music section. and when i try to sync it, there's error

I wanted to listen to some new music i added to my itouch, but when i looked, it said no content in the music section. So i connected to the computer and opened itunes. My device showed up and everything, my playlists and songs where still there, but my itouch still showed No Content. Then i tried to sync it, and there's always an error popping up, so now i have no idea what to do! I have too many songs to start over again! And the iTunes i am using now was not my original one because my old computer broke so i got a new computer and new iTunes, so this iTunes doesn't have all of my songs. i'm sick and tired of being afraid to update my itouch because it says it won't save my songs so when it updates my songs could be deleted. Could someone please help or tell me how to contact the Apple people?

iPod touches or any iDevices from Apple sync only to one computer. If you sync to a different computer, all your music will be replace with the music from the new computer's iTunes. If the music were purchased from iTunes, you can re-download them again otherwise the music on iPod touch will be deleted. Do you have iTunes backup?

Normalize in the bounce section?

Similar Messages

Maybe you are looking for