Nortel VPN error when connecting using airport extreme

Hi All,
I am trying to connect my work laptop xp server pack 2 using Nortel VPN Contivity Client via an Airport Extreme.
I have connected in the past but since the new Airport Extreme update I have been unable to connect.
I can surf the web on the laptop but am unable to connect securely to my work network.
Is there anyway I could go back to the reverse the Extreme update? Would this help?

To d/l prior versions of the software, you simply need to press ctrl (Windows) or Option (Mac) and then click on "check for updates" which is in the File pulldown menu.
This should give you the ability to choose the 7.2.1 version of the firmware. Once it is downloaded, simply go to "Base Station" - "Upload Firmware" and choose your desired version.
The 7.2.1 version allowed connection to the Nortel VPN, where 7.3.1 does not. 7.2.1 seems to have a problem with printing from an XP laptop wirelessly, though printing works from Apple laptops. That is the one remaining problem we are having. Bonjour was loaded on the XP computer, and it sees the printer and creates a definition for it just fine, but cannot print to it. A hardwired XP PC does not have any trouble printing via Bonjour-created definition, nor does the Apple computer have trouble wirelessl printing.

Similar Messages

USB Drive does not work when connected to Airport Extreme

I had an external drive connect directly to my iMac and recently purchased an Airport Extreme. When I plugged it into the USB point on the back of the AX has an odd name and won't allow access. When it was configured directly to my iMac it was named TheVault, now it is TheVault???. When I try to access via Go>Network in finder menu, I get "The operation cannot be completed because the original item for "TheVault??? cannot be found." Another detail if found in the GetInfo it that it shows 0kb available. All things point to it's existence as a drive but it has no access to the data that was clearly there when it was plugged into the back of the desktop. Jack sends.

TheWack wrote:
I had an external drive connect directly to my iMac and recently purchased an Airport Extreme. When I plugged it into the USB point on the back of the AX has an odd name and won't allow access.
Did you use AirPort Utility to enable disk sharing?

Slow wireless internet connection using airport extreme

My wireless internet connection works but is very slow (<80kbs). The problem seems to be with the airport extreme (brand new, purchased in May 07) because my connection is very fast (>6mbs) when i connect by wire to the airport extreme base station. Signal strength is strong, so i can't figure out the problem. Any ideas?
imac Mac OS X (10.4)

BK37, I hope you've solved your problem by now. But if not, and for the benefit of others reading this post, let me share what I (finally) discovered when I had virtually the same problem, i.e. 8mbps wired speed, <50kbps wireless speed.
I tried literally <span style="font-style:italic;">every suggestion I could find in the Airport discussions. First, I can assure you that changing the channel can give you incremental speed improvements in some instances, but for radical drops like yours, it's not the answer. Nor is turning off ipv6, or changing to WEP, or turning off Remote Access, or moving the AEBS, or or or or or....
With such a radical drop in speed, it's most likely you have a hardware-related blockage somewhere. In my case it was my wiring configuration. My setup was France Telecom Livebox (ADSL modem / ethernet & 802.11g router) --> Ethernet cable --> Linksys RTP 3100 IP phone adapter / router --> Ethernet cable --> AEBS --> 3 Airport Express set up to extend network and run AirTunes. After eliminating every other possible problem, I narrowed it down to the Linksys router, which for reasons I have yet to figure out was trapping the speed to the AEBS. I ethernet cabled both the Linksys router and the AEBS directly to the Livebox and presto! Back to blazing speed.
Hopefully this info will be helpful to you or some poor soul in the same situation, as I would have loved to have had it myself before I pulled every hair out of my head!
iMac 21" Intel Mac OS X (10.4.9)

VPN--Can't connect with airport extreme (can with lynksys)

I have an airport WDS at home. My employer has set me up with a VPN. I can't connect via my airport but if I walk over to my neighbor's house, I can (he has a lynksys router). I've been working with my IT rep, looking at ports, firewalls, etc. We've added 4 different port addresses to the port mapping tab on my airport base station, still nothing. Does anyone have thoughts or answers?
Powerbook G4 Mac OS X (10.4.4)

never did find an answer. ended up purchasing a lynksys router and had no problems.

Unknown Error when connecting to AirPort Express

I am still mystified by I-tunes not playing through my AirPort Express since I got the new I-phone 5. As I said in my last post, music on my I-phone plays fine through AirPort as did my I-pad (before I took it back to exchange for an I-pad mini, which I don't have yet). I've tried all the simple fixes, like powering off the computer and switching the I-phone speaker selection from AirPort before I try to play from the computer through AirPort (and no, I am not trying to play both of them at the same time.) Plus, now it's sporadic - sometimes computer through AirPort works and sometimes it doesn't and I can't identify what is different. No one answered my last post, so I'm wondering if this question is just stupid and the answer obvious (to most) or if it's just one of those computer mysteries that has no answer?

Thanks for reply. Yes, I have a computer with iTunes, an iPhone, and an iPad. The Airport Express is set up to allow iTunes to play through my stereo speakers from any of those devices. The problem is, that sometimes, for no apparent reason, my computer will not connect with the Airport Express. It appears to be random: sometimes from iTunes on the computer, I can choose the speakers connected via the Airport and sometimes I cannot. This does NOT happen on the iPhone or iPad. I can always successfully choose the device speakers or the stereo speakers from those devices. It's just hit or miss with the computer.

I currently use Airport Extreme Wanting to extend using another apple airport express

How to set up Airport Express when already using Airport Extreme to extend range.

Extending the range of an 802.11n network
AirPort Utility makes it simple to extend the range of an 802.11n network if you are connecting another 802.11n base station. Connecting two 802.11n AirPort Extreme Base Stations greatly simplifies the WDS setup process.
To extend the range of an 802.11n network:
Open AirPort Utility and select the base station that will connect to the Internet.
Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
Click AirPort in the toolbar, and then click Wireless.
Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
Enter the network name and wireless password if necessary.
Click Update to update the base station with new network settings.

Can I create a unique subnetwork when extending a wireless network using Airport Extreme?

My office building has an Airport Extreme to provide wifi to our individual suites. I would like to create a sub-network using my Airport Extreme for my suite only that uses the wifi signal from our office building and provides internet to the computers (both wired and wireless) in my suite but have it protected so that other suites in my building can't see my computers. Is this possible and how do I do it? I have currently set up my Airport Extreme in wifi-mode "extending a previous wireless network" and have the router with its unique router name. But once I extended the wireless network, I could not find the network name of my router, only the office name (the one I was extending). The computers connected via ethernet to my Airport have internet access but none of my wireless computers see my airport name, it sees the office building network name. I'm assuming they are connecting to my Airport since the signal level is much higher than before and it appears that my Airport is rebroadcasting the network name of my office building. Is there a way to have my Airport broadcast its unique identifier for wifi, still connect to the internet via wifi signal to the Office building airport and maintain segregation between my computers and the rest of my office building?
Also, when I use the Airport Utility on my Iphone, I see the internet -> the office airport extreme -> and then 2 different base stations connected in a Y. Mine and my neighbors (who is probably doing the same thing as I am). But there is a dotted line to my base station, does that mean I'm connected to the internet via my neighbor's airport?
Any thoughts?

I would like to create a sub-network using my Airport Extreme for my suite only that uses the wifi signal from our office building and provides internet to the computers (both wired and wireless) in my suite but have it protected so that other suites in my building can't see my computers.
It is not possible to configure a single Apple AirPort router in this manner using wireless only, but it would be possible to do this with a single AirPort if you connect your AirPort Extreme to the "main" router using a wired Ethernet connection.
As for wireless only....you could probably do what you want by using two Apple routers....an AirPort Express to join the wireless network and provide an Ethernet signal to the AirPort Extreme's WAN port. Then the AirPort Extreme could then be configured to provide a separate network using a different subnet.
Users on the "main" network would not be able to "see" any devices on your "private" network and vice versa.
I use the two router set up all the time at hotels that only provide a wireless signal. The first Express "joins" the wireless network and feeds an Ethernet signal to the second AirPort which is configured to "create a wireless network" in router mode.
This way, I can connect multiple devices to my "private" network, but only pay the hotel for one connection since the hotel router only "sees" the AirPort Express that joins the network.

How do you use Airport extreme at hotels etc, when traveling? I can plug my computer into the Airport with my ethernet but how does Airport pickup signal?

How do you use Airport extreme at hotels etc, when traveling? I can plug my computer into the Airport with my ethernet but how does Airport pickup signal? What equipment & devices do I need to travel with to make this possible?

You may mean the AirPort Express.....not AirPort Extreme.....as the Express is a popular travel router.
The whole idea behind using this device is that the hotel must provide an Ethernet jack in the hotel room. Then you connect the AirPort Express to the Ethernet jack with an Ethernet cable and configure it to provide your own wireless network in the room. You still have to agree to terms, pay the fees, etc.
The problem with this approach is that it is getting very difficult to find hotels in North America that prrovide an Ethernet jack....most have moved to wireless networks and the others are not far behind.
So, if the hotel is already providing a wireless signal, the AirPort Express is of no use in that situation.
If you normally stay at the same hotels, and know that they provide Ethernet ports, an AirPort Express might make sense in terms of convenience.

Imac will not connect to Airport Extreme when configured WPA/WPA2

Imac will not connect to Airport Extreme when configured WPA/WPA2
Posted: Jul 5, 2007 8:22 PM Reply
I just got my Imac to connect to the internet using my Airport Extreme but only by using WEP. I had my Windows XP SP2 machines connecting using WPA/WPA2 with no problem. The Imac will not connect using anything other than WEP, and 1 of the XP machines will not connect using WEP.(I have not tried the other XP machines) I had to set the Airport Extreme for an open network in order to let both computers access the shared hard drive and access the internet.
I don't know what the problem might be and would appreciate any suggestions.
MacBookPro, Imac Mac OS X (10.3.9) Fujitsu tablet PC, 2 XP desktops

hehe...on the visuals. I figured it out already, and I have the old airport card. However, I did a chat with Apple support and while we were chatting I found a USB adapter with MAC drivers which will work. It is:
Hawking Technology HWUG1A Wireless-G USB Adapter with Removable Antenna for Macintosh
Manufacturer Part# HWUG1A
That is the only adapter that actually does WPA/WPA2 that I can find that is for a Mac and not just an older USB that only does WEP. It surprises me that Apple does not have a USB product like this. Anyway, for $56 including shipping, I will have it by Monday or Tuesday. Pretty cool.
Thank you so much for your assistance. It is appreciated.
Lynn

Airport Extreme: Internet working when directly from modem to computer, but not when using airport extreme. i have hit the reset pin and now do not know what to do.

Using Airport Extreme:
- Internet working when directly from modem to computer
- Internet NOT working when modem is connected to AE
- Internet NOT working when modem is connected to AE and AE is connected to computer
- I have hit the reset pin
Now what do I do?
(in advance - lots of love to anyone who helps out)

What sort of Internet connection do you have and who is your Internet Service Provider?
What is the make and model number of your modem?

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

If you have not already done so, your chances will really improve if you....
1) Connect the printer to the USB port on the AirPort Extreme
2) Download and install Bonjour Print Services for Windows on the PC

Can I access my files stored in the hard disk connected to airport extreme when I am away? how?

Can I access my files stored in the hard disk connected to airport extreme when i am away? How?

You can't technically. iPads cannot directly read HDDs like a computer can.
You will need an app liie FileBrowser to do this. Of course all file operations will be done through the App itself.
https://itunes.apple.com/us/app/filebrowser-access-files-on/id364738545?mt=8

Using airport extreme card to connect iPhone to internet of mac ?

Is it possible to use a mac as wireless"base-station" for a iPhone by using an airport extreme card , if the mac is connected only by wire?
I created a network on my mac and my iPhone is connected to it, but it says the network is not connected to internet.
So can I connect the airport extreme card on my mac to the ethernet of my mac by changing the network settings on my mac?

Read here:
http://computers.tutsplus.com/tutorials/how-to-share-your-macs-internet-connecti on--mac-60309

Using a wire connected mac as wireless base-station by using airport extreme card

Is it possible to use a mac as wireless"base-station" for a iPhone by using an airport extreme card , if the mac is connected only by wire?
I created a network on my mac and my iPhone is connected to it, but it says the network is not connected to internet.
So can I connect the airport extreme card on my mac to the ethernet of my mac by changing the network settings on my mac?
If not, is there another way?

ok, i got the answer from another discussion. http://computers.tutsplus.com/tutorials/how-to-share-your-macs-internet-connecti on--mac-60309

Re : Apple TV doesn't connect to a Wi-Fi Broadband Internet Service using Airport Extreme

Hi, using Airport Extreme (Airport Utility version 6.3.2, Internet :DHCP, Router mode : Off (Bridge)) with a Wi-Fi Broadband Internet service. My Desktop (iMac), Macbook,iPhone,iPad join the Airport Extreme Wirelessi network (WPA/WPA2 Personal) easily and Broadband ISP Login-page pops up with username & password options. However, in case of Apple TV (2nd Generation Software : 6.0.2 (6646.81.1)), it connects the Airport Extreme W-Fi network easily but no Broadband ISP Login-page pops up with username & password options. Even using the Ethernet connection of the said Wi-Fi Broadband Internet Service directly to the Apple TV, no internet network connects. Please help.

There is no way you can handle login details with the ATV and there is probably no way you can do it with extreme in router mode either.. If you need to use a login name and password via a html screen then that is impossible in a device without html.
But your newest addition confuses me.
A slight correction in the question : the Broadband Internet Service isn't Wireless, but having Ethernet connection to the Airport Extreme.
So how do your iphones pop up a login page.
easily and Broadband ISP Login-page pops up with username & password options.
The alternative method is to use a computer .. login to your service and use ICS through the computer to the ATV..
See http://www.youtube.com/watch?v=0jJe_BkQMRc
Or any site that shows how to route internet through a computer.

Nortel VPN error when connecting using airport extreme

Similar Messages

Maybe you are looking for