North/South Orientation for Maps 2

hello,
So i finally got a map for my area without downloading MapLoader.
Now i have another issue.
When i using Maps 2.0 it has "north" as pointing up. but when i'm travelling South it is pretty difficult to follow map because the map updates at the bottom of the screen. When travelling north it's not a problem, i have the whole screen to look at as i drive.
is there anyway of switching this orientation depending on which way i'm travelling?
cs.

Hi,
I have the same issue. Is there any method to view the map as if I were driving without starting the navigation?
Thanks for any HELP!!!
Peter

Similar Messages

Fix for excessive data usage for "mapping services"?

I'm experiencing a problem where my iPhone 4S running iOS 7.1.2 (though I saw this problem with 7.1.1 as well) uses huge amounts of cellular data (500 MB+) while sitting idle. Looking at usage in the Cellular section of settings reveals that the data is being used for "mapping services" under system services. I've turned off location services for all but a very few apps that truly require it. I've also turned off background refresh for all apps, cellular data for most apps and system services, as well as turning off the frequent locations feature. Unfortunately, even after making these changes, the problem occurs. Some searching does reveal a few other people reporting this (e.g. here). Unfortunately, I haven't found any reports of working solutions.
I'm traveling in Africa, and using relatively expensive prepaid data, so this problem is actually costing me real money, having used up 2 GB (~$60). If anyone has seen this and discovered a real fix, I would love to hear about it!

I had the same problem. Mapping Services used 1G of data over night while I was sleeping. My location services are turned off and anything else that could use mapping services. I reported the problem to Vodacom (Network service provider in South Africa) and they told me they had numerous complaints regarding this and they are going to refund my money, BUT they cannot tell me how to solve the problem going forward. Vodacom advised that Apple are upgrading their maps from Google Maps to their own iMaps application and that is why the data is being depleted in the background. This makes no sense to me though. How can they take data from customers to upgrade their systems. Very frustrating.
My next step is to go into the apple store and see if they can do anything. If I happen to find a solution from apple I will be sure to let you know!

Am creating document with Pages. pages are in "portrait" orientation, but two charts at end need to be "landscape". changing the orientation for one section changes it for entire doc. can i have different orientations in Pages for different sections?

am creating a document with Pages. all pages using "portrait" orientation, except 2 appendices need to be in "landscape". in Word for Windows it is possible to have different page orientations for different sections of a document. is that possible with Pages. Even when i put the appendices in a different section, changing the page orientation changes it for the entire doc.

Make a separate document the size and orientation you want.
Turn that into a pdf and add it back into the original Pages document or into the pdf from from that document.
Peter

What are the best approaches for mapping re-start in OWB?

What are the best approaches for mapping re-start in OWB?
We are using OWB repository 10.2.0.1.0 and OWB client 10.2.0.1.31. The Oracle version is 10 G (10.2.0.3.0). OWB is installed on Linux.
We have number of mappings. We built process flows for mappings as well.
I like to know, what are the best approches to incorportate re-start options in our process. ie a failure of mapping in process flow.
How do we re-cycle failed rows?
Are there any builtin features/best approaches in OWB to implement the above?
Does runtime audit tables help us to build re-start process?
If not, do we need to maintain our own tables (custom) to maintain such data?
How did our forum members handled above situations?
Any idea ?
Thanks in advance.
RI

Hi RI,
How many mappings (range) do you have in a process flows?Several hundreds (100-300 mappings).
If we have three mappings (eg m1, m2, m3) in process flow. What will happen if m2 fails?Suppose mappings connected sequentially (m1 -> m2 -> m3). When m2 fails then processflow is suspended (transition to m3 will not be performed). You should obviate cause of error (modify mapping and redeploy, correct data, etc) and then repeat m2 mapping execution from Workflow monitor - open diagram with processflow, select mapping m2 and click button Expedite, choose option Repeat.
In re-start, will it run m1 again and m2 son on, or will it re-start at row1 of m2?You can specify restart point. "at row1 of m2" - I don't understand what you mean (all mappings run in Set based mode, so in case of error all table updates will rollback,
but there are several exception - for example multiple target tables in mapping without corelated commit, or error in post-mapping - you must carefully analyze results of error).
What will happen if m3 fails?Process is suspended and you can restart execution from m3.
By having without failover and with max.number of errors=0, you achieve re-cycle failed rows to zero (0).This settings guarantee existence only two return result of mapping - SUCCSES or ERROR.
What is the impact, if we have large volume of data?In my opinion for large volume Set based mode is the prefered processing mode of data processing.
With this mode you have full range enterprise features of Oracle database - parallel query, parallel DML, nologging, etc.
Oleg

Setting the page orientation for a report

Hi
Currently, in infoview I have observed that we can set the page orientation for a report in a webi document , i.e. whether the report is to be viewed in landscape mode or portrait mode.
Currently, in the BO SDK, I have come across the classes like Orientation, but am not able to figure out how to use them.
Can you please paste some code snippet, how to use this class for setting the orientation of the document.
Thanks in advance,
Shruti

Hi Shruti,
To retrieve the Reportcontainer for an existing report on a WebI document, you can do the following:
ReportStructure oReportStructure = oDocumentInstance.getStructure();
ReportContainer oReportContainer = (ReportContainer) oReportStructure.getReportElement(0);
Hope this helps.
Regards,
Dan

Mandatory fields for mapping in ORDERS idoc.

Hi
I m working on File to idoc scenario for creation of sales order in ECC 6.0 , now I want to know what are the mandatory fields in ORDERS idoc which needs to be populated or else disbaled so that the sales order gets created properly in the ECC 6.0..
Pl let me know the method of finding mandatory field for mapping for any idoc and which fileds of idoc are to be disabled.
Pl help ..
ans will be rewarded .
thanks & rgds
mojib

HI,
U can disable the control record segment and in the IDOC adapter use the option apply control record from payload.
If you have set the Apply Control Record Values from Payload indicator in the receiver IDoc adapter, the following fields are filled from the IDoc-XML payload:
·        MESCOD
·        MESCFT
·        TEST
·        EXPRSS
·        STD
·        STDVRS
·        STDMES
·        SNDSAD
·        SNDLAD
·        RCVSAD
·        RCVLAD
·        REFINT
·        REFGRP
·        REFMES
·        STATUS
·        DIRECT
·        OUTMOD
·        CREDAT
·        CRETIM
read the information in below link:
http://help.sap.com/saphelp_nw70/helpdata/EN/ab/bdb13b00ae793be10000000a11402f/frameset.htm
thnx,
chirag

How do i disable orientations for a specific view in my tab bar project without disabling for the other views?

How do i disable orientations for a specific view in my tab bar project without disabling for the other views?
Any suggestions?

Note that you can also hide the tab bar completely with code in the userChrome.css file.
Add code to the <b>userChrome.css</b> file below the default @namespace line.
*http://kb.mozillazine.org/userChrome.css
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#TabsToolbar { display: none !important; }
</nowiki></pre>
The customization files userChrome.css (user interface) and userContent.css (websites) are located in the <b>chrome</b> folder in the Firefox profile folder.
*http://kb.mozillazine.org/Editing_configuration

Why can't Siri locate contact addresses for map directions?

Having an issue with iphone 4s using Siri for locating addresses saved within contacts for map directions.
The problem is only evident on about half of the contacts so far.. the message i get is 'I couldn't find an address for .." even though the contact I asked for clearly has their address saved. I've doubled checked I've used the right address fields and seem fine.
I'm unable to distinguine the problem between the contacts where Siri works as it should and locate the address, and the ones it can't - including my home address.
Very frustating when I want directions in the car for driving and using hands free.
Any ideas guys?!

It seems to be a bug in the software. Other people have said it may have so something to do with siri not understanding UK postcodes properly. I don't really know but I seem to have found a solution, although cumbersome.
-Load up your contact from phonebook app
-Tap the address (apple maps should go straight to it)
-Double tap home and switch back to phonebook app
-Delete the address
-Diuble tap back into maps (the pin point should still be there)
-Press the little blue arrow on the pin
-Add to contacts > Existing contact
-Select contact
(Now this is the important bit)
-Tap edit then tap the right hand column off the address section in order to set it as home, work, etc.
-Done
Phew!!
It's long winded I know, but now I can just tell siri to get directions to so and so's home safely while driving without fiddling around tapping buttons.
Sort it out Apple. It should 'Just Work' outside of the US too you know.

Struts - Firfefox messages: No input attribute for mapping path /editNxtMod

Hi!
I'd like to create an admin application which is based upon a simple database table. The list shows already, but the detail of selected record doesn't. When I click to a record, the Firefox writes "No input attribute for mapping path /editNxtModuls". What does it mean? Maybe bad configuration files?
Please help me!
Thank Yoy!
Here my code:
<struts-config>
     <data-sources />
     <form-beans>
          <form-bean name="NxtModulsForm" type="forms.NxtModulsForm" />
     </form-beans>
     <global-exceptions />
     <global-forwards>
          <forward name="error" path="/error.jsp" />
     </global-forwards>
     <action-mappings>
          <action input="/index.jsp" path="/listNxtModuls"
               type="actions.ListNxtModulsAction">
               <forward name="list" path="/NxtModuls/list.jsp" />
          </action>
          <action name="NxtModulsForm"
               path="/editNxtModuls" scope="request"
               type="actions.EditNxtModulsAction" validate="true">
               <forward name="edit" path="/NxtModuls/edit.jsp" />
          </action>
          <action path="/saveNxtModuls"
               type="actions.SaveNxtModulsAction" />
          <action input="/NxtModuls/edit.jsp" name="NxtModulsForm"
               path="/processNxtModuls">
               <forward name="save" path="/saveNxtModuls.do" />
               <forward name="cancel" path="/cancelNxtModuls.do" />
          </action>
          <action path="/cancelNxtModuls"
               type="actions.CancelNxtModulsAction" />
     </action-mappings>
     <controller />
     <message-resources parameter="resources.application" />
</struts-config>
*****************list.jsp*************
<td>                         <a href="editNxtModuls.do?modul_id=<bean:write name="nxtmoduls" property="modul_id"/>">
<bean:write name="nxtmoduls" property="modul_id"/>
<a/>
</td>
*****************edit.jsp*************
<html>
     <h2>Edit</h2>
     <html:errors/>
     <body>
          <html:form action="processNxtModuls.do">
               <table border="1">
                    <tr>
                         <td>Modul name: </td>
                         <td><html:text property="modul_name" size="20" maxlength="20" /></td>
                    </tr>
                    <tr>
                         <td>Synonym name: </td>
                         <td><html:text property="synonym_name" size="20" maxlength="20" /></td>
                    </tr>
               </table>
               <html:submit value="Save" onclick="go('saveNxtModuls')"/>
               <html:submit value="Cancel" onclick="go('cancelNxtModuls')"/>
          </html:form>
     </body>
</html>
*********************action******************
public class EditNxtModulsAction extends CommonAction {
     public EditNxtModulsAction() {
     @Override
     public ActionForward commonExecute(ActionMapping mapping, ActionForm form,
               HttpServletRequest request, HttpServletResponse response) throws Exception {
          NxtModulsForm myForm = (NxtModulsForm)form;
          try {
               if (request.getParameter("modul_id") == null) {
                    throw new OwnException("The modul_id parameter was not returned!");
               Long ModulId;
               try {
                    ModulId = new Long(request.getParameter("modul_id"));
               catch(Exception e) {
                    throw new OwnException("The modul_id parameter is not a number!");
               NxtModulsBean OneRecord = new NxtModulsBean();
               OneRecord = myManager.getRecord(ModulId);
               myForm.setModul_name(OneRecord.getModul_name());
               myForm.setSynonym_name(OneRecord.getSynonym_name());
          catch(OwnException e) {
               System.out.println(e);
               myErrors.add("label",new ActionError("error.get_record_failed"));
               saveErrors(request, myErrors);
               mapping.findForward("error");
          return mapping.findForward("edit");
}

The config file looks ok to me.
The Action looks like you aren't taking full advantage of Struts.
You shouldn't have to call request.getParameter() - you should define an action form which picks up the parameters, and does the validations/conversions for you.
Maybe try this:
<html:link action="/editNxtModuls" paramId="modul_id" paramName="nxtmoduls" paramProperty="modul_id" /><bean:write name="nxtmoduls" property="modul_id"/>
</html:link>Edit: Reads error message
No input attribute for mapping path /editNxtModuls
This means that the form validation for this action failed, and it is attempting to return control to the sending page so that you can fix the error.
Check the forms.NxtModulsForm validate() method to see if validation would pass/fail.
The fix would be to put an "input" attribute into the action
<action name="NxtModulsForm"
path="/editNxtModuls"
scope="request"
type="actions.EditNxtModulsAction"
validate="true"
input = "list.jsp">
<forward name="edit" path="/NxtModuls/edit.jsp" />
</action>
Cheers,
evnafets

Functional Specs for Mapping Idocs to EDI

Hello Friends ..
Am new to world of EDI...
can any one explain ..wat do u mean by devolping functional specs for mapping IDocs to EDI..
If you can provide me with examples or if you guys can suggest any site where i can browse some material about EDI..i wud really appreciate...
Best Regards

Hi Rohan,
>>>do u mean by devolping functional specs for mapping IDocs to EDI..
you have to know which idoc fields you have to map to EDI message fields
take a look at those links:
they will show how do you map different IDOC message types to EDI messages
<b>IDOC - EDI mappings:</b>
http://www.sapgenie.com/sapedi/mapping.htm
<b>Analysis of the compatibility of EDIFACT messages in the form of SIMPL-EDI with the IDoc Interface:</b>
http://www.sapgenie.com/sapgenie/docs/SIMPL-EDI-E_ORDERS.doc
Regards,
michal

Debugging Tips for Mapping and Validation modules

Hi,
I am new to CRM, anybody can send the dubuging tips for Mapping and Validation modules and the list of tables which I have to check before loading.
(Intilal load & delta load)
Regards
KHM

KHM,
The first thing you need to make sure is that all queues are deregistered on both systems. Check the settings in SMQR and SMQS on your systems. The next step is that your middleware connection user must be a dialog user in order to debug the middleware properly.
If you have those two steps done, then for an initial load you can actually go into to the queues and debug the entries from each queue. For a delta load you will need to put a break point in the transaction before the middleware trigger, and then turn on update debugging(if you want to go through the full process).
The only other key is looking up the correct function modules for the adapter objects to determine what is being called. Once you know these and have done the steps above you can in general debug.
Validate the information above in your system and then let me know where you are getting stopped in your debug process. We can then try to figure out why the debugger is not being called.
Good luck,
Stephen

Assign own FM for mapping BAPIMTCS- BDoc

Hi All!
Help me please, how can i assign own FM for mapping BAPIMTCS to BDoc (for object BUPA_MAIN). In tr. R3AC1 i can't do this. I can't make changes to table SMOFSUBTAB via SE11.
Thanks!

I still cannot debug my FM :-(.
I put entry in table TPS34:
Process    Ctr           Appl.    Function module.
SMOUTIL3          BUPA     Z_BUPA_MWX_BDOC_SMOUTIL2
header of Z_BUPA_MWX_BDOC_SMOUTIL2 is:
""Local Interface:
*" IMPORTING
*"     VALUE(I_OBJNAME) TYPE SMO_OBJNAM
*"     VALUE(I_OBJCLASS) TYPE SMO_OBJCLA
*"     VALUE(I_SENDER_TYPE) TYPE SMW1STID
*"     VALUE(I_SENDER_SITE_ID) TYPE SMO_SITEID
*"     VALUE(I_TARGET_SITE_ID) TYPE SMO_SITEID
*" EXPORTING
*"     REFERENCE(E_DO_NOT_CALL_FLOW) TYPE CDXFELD
*" TABLES
*"      TI_BAPIMTCS STRUCTURE BAPIMTCS
*"      T_MESSAGES STRUCTURE BAPICRMMSG
*"      TI_KEY_INFO STRUCTURE BAPICRMKEY
*"      TI_OTHER_INFO STRUCTURE BAPIEXTC
*"      TI_BAPIIDLIST STRUCTURE BAPIIDLIST
*" CHANGING
*"     REFERENCE(HEADER) TYPE SMW3_FHD
*"     VALUE(MESSAGE)
*"     VALUE(MESSAGE_EXT) OPTIONAL
*"     VALUE(ERROR_SEGMENTS) TYPE SMW_ERRTAB
*"     VALUE(OBJECT_LINKS) TYPE TRL_BORID
*"     VALUE(E_BAPICRMDH2) TYPE BAPICRMDH2
i put eternal loop in this module like this:
while int < 3.
   int = int + 1.
   int = 0.
endwhile.
but it's not any process in sm50.
I was put a breakpoints in OPEN_FI_PERFORM_SMOUTIL3_P and
SMOF0_NEXT_GENERATION_HANDLER and not stop at them.
I suspect that i incorrectly register my FM and process not come to that.

Print orientation for Iphoto 9.5

How do you change print orientation for Iphoto 9.5?

I have turned the picture and it doesn't work.
I'm trying to print in landscape mode but Iphoto 9.5 default orientation is portrait and provides no ability to change orientation to landscape
The orientation option is missing from the print preview screen.

How to extract data from the XL sheet for mapping

Hello all,
I have a scenario of file to idoc, where in the source file contains the information in XL sheet. Can we access the XL sheet data for mapping ? if so can anyone helpme providing the procedure.

Hi,
For reading an XL file u need to write an java code.
refer the below weblog for more help:
SAP Network Blog: XI: Generating Excel files without the Java nor the Conversion agent not possible?
/people/michal.krawczyk2/blog/2005/12/10/xi-generating-excel-files-without-the-java-nor-the-conversion-agent-not-possible
SAP Network Blog: Read Excel instead of XML through FileAdapter
/people/sap.user72/blog/2005/07/04/read-excel-instead-of-xml-through-fileadapter
Thnx
Chirag

Check for Map Updates

I Bought Nokia N78 with 90 days free license
At the First Month Everything is Alright but Suddenly...
'Check for Map Updates' Window is Appeared. I deleted Cities But It's the same thing...
" Can I disable this Window without Deleting Maps Application?"
N78 OWNER
Solved!
Go to Solution.

Hi, I suppose no one replied because no one has come accross your problem before. I certainly have never heard of it.

North/South Orientation for Maps 2

Similar Messages

Maybe you are looking for